IPH response to consultation: Introduction of 20mph speed restrictions on smaller residential streets

Conall McDevitt (SDLP MLA) launched a consultation regarding the introduction of 20mph speed restrictions in residential streets as part of his bid to introduce legislation through a Private Members Bill in the Northern Ireland Assembly.  The purpose of the Bill is to increase road safety, particularly for pedestrians and other road users, with additional health and environmental benefits. IPH submitted a response to the Private Members’ Bill regarding the introduction of 20mph speed restriction on smaller residential roads.  IPH recognises the potential public health benefits of this proposal in terms of reduced injuries and fatalities in built up areas; more opportunities for walking and cycling (helping to tackle obesity and reduce the risk of diabetes, heart disease and stroke); greater social cohesion among communities and improved mental health; and reduced emissions that contribute to climate change, air and noise pollution.

Detection of fingermarks by colloidal gold (MMD/SMD): beyond the pH 3 limit

This work is part of a continuing goal to improve the multimetal deposition technique (MMD), as well as the single-metal deposition (SMD), to make them more robust, more user-friendly, and less labour-intensive. Indeed, two major limitations of the MMD/SMD were identified: (1) the synthesis of colloidal gold, which is quite labour-intensive, and (2) the sharp decrease in efficiency observed when the pH of the working solution is increased above pH 3. About the synthesis protocol, it has been simplified so that there is no more need to monitor the temperature during the synthesis. The efficiency has also been improved by adding aspartic acid, conjointly with sodium citrate, during the synthesis of colloidal gold. This extends the range of pH for which it is possible to detect fingermarks in the frame of the MMD/SMD. The operational range is now extended from 2 to 6.7, compared to 2-3 for the previous formulations. The increased robustness of the working solution may improve the ability of the technique to process substrates that tend to increase the pH of the solution after their immersion.

Ecological characteristics of Triatoma patagonica at the Southern limit of its distribution (Chubut, Argentina)

This study aimed at identifying the ecological characteristics of Triatoma patagonica Del Ponte 1929 (Hemiptera: Reduviidae) and evaluating the epidemiological importance of this species at its southernmost distribution limit. We carried out two surveys in the Province of Chubut, in summer and in spring, 1998. In each survey, we interviewed local health care agents for triatomine recognition and reports of the bugs, followed by entomological searches in houses and peridomestic and silvatic biotopes. The presence of T. patagonica was confirmed in two of the five localities indicated by interview. In agreement with previous studies, all these positive localities were east of the 11°C isotherm, within the Monte phytogeographic province. Triatomine abundance and infestation levels (in peridomiciles and peridomestic biotopes) were higher in summer than in spring, possibly reflecting adverse environmental conditions such as flood and cold winter weather. In the silvatic environment, we found three adult bugs under rocks in summer. In peridomestic sites bugs were only found associated with chickens, which were also the only blood meal source identified. Infection by Trypanosoma cruzi was not detected. We conclude that T. patagonica at its southernmost distribution limit does not represent a risk to public health due to its low abundance, lack of association with humans, and absence of T. cruzi infection.

PHA urges 'freshers' to be smart and know their alcohol limits

As 'fresher's week' commences, the Public Health Agency is encouraging students across Northern Ireland to avoid binge drinking and to know their limits if they do choose to drink alcohol.Enjoying new freedoms, at college or university, means taking care of yourself and others and, if you choose to drink, staying within safe alcohol limits. Owen O'Neill, PHA Health and Social Wellbeing Improvement Manager for drugs and alcohol, said: "Some young people may drink more when they leave home, or join their friends in college or university for the first time. They might think that, as young people, they don't have to take care with alcohol, but staying within the safe drinking limits is important for everyone who drinks. Excessive and binge drinking can have lasting effects on health, such as damage to the liver, heart, brain and stomach. Drinking too much can also increase the risk of accidents and antisocial behaviour as well as sexually transmitted infections and unplanned pregnancy"."We would also strongly advise against drinking games. Although they are regarded as a 'bit of fun', in reality they can be very dangerous. As an extreme form of binge drinking, where large quantities of alcohol are consumed in a very short time, drinking games can result in alcohol poisoning, leading to brain damage, coma or death. The PHA encourages students to enjoy their new student life, but urges them to be aware of their alcohol intake and drink responsibly, especially throughout fresher's week, with the many cheap drink promotions currently available."Daily alcohol limits are recommended by the government in order to avoid the risks of excessive and binge drinking in any one session. These are:Men: No more than 3 to 4 units of alcohol a day and no more than 21 units over the course of the week.Women: No more than 2 to 3 units of alcohol a day and no more than 14 units over the course of the week.Examples of units:Can of extra strong lager - 4 unitsBottle of lager - 1.5 unitsPint of standard lager - 2.5 unitsPint of premium larger - 3 unitsSmall pub bottle of wine - 2.25 units70cl bottle of wine - 7 to 10 unitsStandard 275ml of alcopops - 1.5 to 1.8 units70cl bottle of alcopops - 3.75 to 4.5 unitsPub measure of spirits - 1.5 unitsPint of cider - 3 unitsPint of stout - 2.5 unitsIf you do choose to drink alcohol:DON'T:Ever drink and driveDrink on an empty stomachMix alcohol with other drugsDrink in rounds as this may speed up your drinkingLeave your drinks unattendedDO:Take sips rather than gulpsAlternate each alcoholic drink with a non alcoholic drink e.g. water or a soft drinkSet yourself a limit and try to stick to it (refer to daily alcohol limits) Take frequent breaks from drinking to give your body time to recoverTell friends and family where you are going and who you will be withRemember, that for each unit you drink over the daily limit, the risk to your health increases. It's important to spread the units throughout the week - you can't 'save up' your units for the weekend or your holiday. It is also important to drink plenty of water, ideally matching the amount of alcohol you have consumed.So students make smart choices this term - drink sensibly and know your limits!For further information on sensible drinking and alcohol units visit the Public Health Agency's website www.knowyourlimits.info

Three points for speed

This poster focuses on the effects of speed. The poster message is 'Three points for speed' and then lists three of the effects: 1. Extreme tiredness 2. Disturbed sleep 3. Paranoia. It also provides contact details for the National Drugs Helpline. Tel: 0800 776600.

Taking speed can really bring you down

This poster informs about the effects of taking speed stating: 'The more speed you take, the more exhausted you are when it wears off and the more likely you are to keep taking more. And that's called addiction'. It also provides contact details for the National Drugs Helpline. Tel: 0800 776600.

Highly pathogenic adapted HIV-1 strains limit host immunity and dictate rapid disease progression.

OBJECTIVE:: The study of HIV-1 rapid progressors has been limited to specific case reports. Nevertheless, identification and characterization of the viral and host factors involved in rapid progression are crucial when attempting to uncover the correlates of rapid disease outcome. DESIGN:: We carried out comparative functional analyses in rapid progressors (n = 46) and standard progressors (n = 46) early after HIV-1 seroconversion (≤1 year). The viral traits tested were viral replicative capacity, co-receptor usage, and genomic variation. Host CD8 T-cell responses, humoral activity, and HLA immunogenetic markers were also determined. RESULTS:: Our data demonstrate an unusual convergence of highly pathogenic HIV-1 strains in rapid progressors. Compared with standard progressors, rapid progressor viral strains show higher in-vitro replicative capacity (81.5 vs. 67.9%; P = 0.025) and greater X4/DM co-receptor usage (26.3 vs. 2.8%; P = 0.006) in early infection. Limited or absent functional HIV-1 CD8 T-cell responses and neutralizing activity were measured in rapid progressors. Moreover, the increase in common HLA allele-restricted CD8 T-cell escape mutations in rapid progressors acts as a signature of uncontrolled HIV-1 replication and early impairment of adaptive cellular responses. CONCLUSION:: Our data support a dominant role for viral factors in rapid progressors. Robust HIV-1 replication and intrinsic viral properties limit host adaptive immune responses, thus driving rapid disease progression.

The arbuscular mycorrhizal fungus Glomus intraradices is haploid and has a small genome size in the lower limit of eukaryotes.

The genome size, complexity, and ploidy of the arbuscular mycorrhizal fungus (AMF) Glomus intraradices was determined using flow cytometry, reassociation kinetics, and genomic reconstruction. Nuclei of G. intraradices from in vitro culture, were analyzed by flow cytometry. The estimated average length of DNA per nucleus was 14.07+/-3.52 Mb. Reassociation kinetics on G. intraradices DNA indicated a haploid genome size of approximately 16.54 Mb, comprising 88.36% single copy DNA, 1.59% repetitive DNA, and 10.05% fold-back DNA. To determine ploidy, the DNA content per nucleus measured by flow cytometry was compared with the genome estimate of reassociation kinetics. G. intraradices was found to have a DNA index (DNA per nucleus per haploid genome size) of approximately 0.9, indicating that it is haploid. Genomic DNA of G. intraradices was also analyzed by genomic reconstruction using four genes (Malate synthase, RecA, Rad32, and Hsp88). Because we used flow cytometry and reassociation kinetics to reveal the genome size of G. intraradices and show that it is haploid, then a similar value for genome size should be found when using genomic reconstruction as long as the genes studied are single copy. The average genome size estimate was 15.74+/-1.69 Mb indicating that these four genes are single copy per haploid genome and per nucleus of G. intraradices. Our results show that the genome size of G. intraradices is much smaller than estimates of other AMF and that the unusually high within-spore genetic variation that is seen in this fungus cannot be due to high ploidy.

alr approach for replacing values below the detection limit

All of the imputation techniques usually applied for replacing values below thedetection limit in compositional data sets have adverse effects on the variability. In thiswork we propose a modification of the EM algorithm that is applied using the additivelog-ratio transformation. This new strategy is applied to a compositional data set and theresults are compared with the usual imputation techniques

Evaluation of the speed-oligo direct Mycobacterium tuberculosis assay for molecular detection of mycobacteria in clinical respiratory specimens.

We present the first evaluation of a novel molecular assay, the Speed-oligo Direct Mycobacterium tuberculosis (SO-DMT) assay, which is based on PCR combined with a dipstick for the detection of mycobacteria and the specific identification of M. tuberculosis complex (MTC) in respiratory specimens. A blind evaluation was carried out in two stages: first, under experimental conditions on convenience samples comprising 20 negative specimens, 44 smear- and culture-positive respiratory specimens, and 11 sputa inoculated with various mycobacterium-related organisms; and second, in the routine workflow of 566 fresh respiratory specimens (4.9% acid-fast bacillus [AFB] smear positives, 7.6% MTC positives, and 1.8% nontuberculous mycobacteria [NTM] culture positives) from two Mycobacterium laboratories. SO-DMT assay showed no reactivity in any of the mycobacterium-free specimens or in those with mycobacterium-related organisms. Compared to culture, the sensitivity in the selected smear-positive specimens was 0.91 (0.92 for MTC and 0.90 for NTM), and there was no molecular detection of NTM in a tuberculosis case or vice versa. With respect to culture and clinical data, the sensitivity, specificity, and positive and negative predictive values for the SO-DMT system in routine specimens were 0.76 (0.93 in smear positives [1.0 for MTC and 0.5 for NTM] and 0.56 in smear negatives [0.68 for MTC and 0.16 for NTM]), 0.99, 0.85 (1.00 in smear positives and 0.68 in smear negatives), and 0.97, respectively. Molecular misidentification of NTM cases occurred when testing 2 gastric aspirates from two children with clinically but not microbiologically confirmed lung tuberculosis. The SO-DMT assay appears to be a fast and easy alternative for detecting mycobacteria and differentiating MTC from NTM in smear-positive respiratory specimens.

Analytical expressions for the flame front speed in the downward combustion of thin solid fuels and comparison to experiments

We derive analytical expressions for the propagation speed of downward combustion fronts of thin solid fuels with a background flow initially at rest. The classical combustion model for thin solid fuels that consists of five coupled reaction-convection-diffusion equations is here reduced into a single equation with the gas temperature as the single variable. For doing so we apply a two-zone combustion model that divides the system into a preheating region and a pyrolyzing region. The speed of the combustion front is obtained after matching the temperature and its derivative at the location that separates both regions.We also derive a simplified version of this analytical expression expected to be valid for a wide range of cases. Flame front velocities predicted by our analyticalexpressions agree well with experimental data found in the literature for a large variety of cases and substantially improve the results obtained from a previous well-known analytical expression

Effect of initial conditions on the speed of reaction-diffusion fronts

The effect of initial conditions on the speed of propagating fronts in reaction-diffusion equations is examined in the framework of the Hamilton-Jacobi theory. We study the transition between quenched and nonquenched fronts both analytically and numerically for parabolic and hyperbolic reaction diffusion. Nonhomogeneous media are also analyzed and the effect of algebraic initial conditions is also discussed