Características físicas e morfológicas do sêmen de Bos taurus e Bos indicus antes e após a criopreservação

Pós-graduação em Medicina Veterinária - FCAV

Detecção de Histophilus somni (Haemophilus somnus) no sêmen bovino mediante reação em cadeia pela polimerase (PCR)

The present study evaluated the use of PCR for Histophilus somni detection in bovine semen. Semen samples were experimentally infected with H. somni at dilutions ranging from 107 to 101 bacteria/mL and subjected to DNA extraction by the phenol/chloroform method, followed by PCR amplification. The amplification products were analyzed by electrophoresis in 8% acrylamide gel. The oligonucleotide primers used yielded an amplification fragment of 400 base pairs from the bacterial DNA. Positive amplification was obtained even for the 101 bacteria/mL dilution. PCR proved to be an efficient method for the detection of H. somni. The results obtained in this study have brought relevant information for the diagnosis of H. somni, justifying the need for the diagnosis of this bacterium in bulls, especially in semen samples that should be free of contamination. The PCR method has shown to be a useful tool for the quality control of semen produced in artificial insemination centers.

Uso de aptâmeros na sexagem de sêmen bovino

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do choque osmótico na avaliação da viabilidade de sêmen criopreservado de ovinos

This study evaluated the use of hipoosmotic swelling test (HOST) with deionized water (0 mOsmol), as a method of post thaw ram semen evaluation and correlate their findings with different techniques of semen evaluation. Therefore, twenty semen samples of 20 different adult rams were assessed as for kinetic sperm parameters through computerized system (IVOS 12, Hamiton Thorn Biosciences, Beverly, MA, EUA) and subjective analysis. The sperm membranes viability was carried out by the association of fluorescent probes (propidium iodide, JC-1 and FITC-PSA). The structural integrity of the plasma membrane was also studied through supravital test with eosin and the functional integrity of membrane evaluated by doing the hipoosmotic swelling test with deionized water (0 mOsmol), in the following proportions: One part of semen for 10 (HOST 10), 50 (HOST 50) and 100 (HOST 100) parts of water. After semen dilution in the different proportions it was fixed in formalin-buffered saline and analyzed with regard to percentage of HOST reactive sperm (bent/coiled). The percentage of reaction obtained for HOST 10 (33,1%); HOST 50 (32,8%) and HOST 100 (31,8%) did not differ significantly. HOST 10 presented positive correlation with the plasma membrane integrity by the EOS (r = 0,80; p < 0,05). Positive correlations between HOST 50 and HOST 100 with sperm subpopulation with membrane integrity by fluorescence were observed (r = 0,83 and r = 0,85; p < 0,01). The findings suggest that the HOST with deionized water can provide additional information for post thawing ram sperm viability evaluation.

Utilização de sistemas de refrigeração de sêmen equino na estabilização das amostras seminais previamente à congelação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Termografia digital por infravermelho do escroto e qualidade do sêmen em touros nelore (bos taurus indicus)

Aimed to study the relationship between scrotal temperature on semen quality by use of infrared thermography in Nelore bulls bred extensively. There were scrotal thermography and semen collection. Climatic data were collected by means of globe thermometer. The thermograms of the scrotum were obtained by digital infrared thermography. We carried out ejaculates through electroejaculation for analysis of quantitative and qualitative characteristics. For the data, we used analysis of variance and subsequently applied the Tukey test at 5%. (p <0.05) between animals for sperm vigor, sperm motility between animals and between crops, sperm concentration, total sperm and total viable sperm between groups, between harvests for the scrotum temperatures and climate data. It was concluded that the surface temperatures of the scrotum and climatic factors influence the quality of semen. Thermography is recommended as a complementary test in the evaluation of reproductive bulls.

Correlação da circunferência escrotal, citologia testicular e parâmetros do sêmen do epidídimo de touros

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo sobre a redução do estresse oxidativo em sêmen equino a partir da adição de quercetina nos diluentes de refrigeração e congelação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da centrifugação e filtragem do sêmen bovino sobre a criopreservação espermática

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem e simulação de ciclos a gás com resfriamento de ar na entrada

The optimization of energy generation systems has become a key issue for technological and social development, mainly in developing countries, where the electricity consumption rises sharply. Gas turbine cycle is an electricity generating system, which studies have demonstrated that inlet air cooling increases net power and thermal efficiency. Thus, this study intends to quantify these parameters for environments with different ambient temperature and relative humidity. Two types of air cooling were used: evaporative and absorption systems. The configuration parameters only with the gas turbine cycle were compared to those whose configuration allowed cooling. First, it was analyzed only evaporative cooling. Next, the absorption system was used for analysis. The last configuration mixed these two methods, dividing equally its flow. The results showed that thermal efficiency and net power increase in any case of cooling, with absorption system more advantageous in terms of generated energy, where an increase between 1 and 2 MW was observed, depending on the ambient conditions . When the two methods were working together at low relative humidity, it showed a thermal efficiency increase compared to absorption system, up to 2.4%. Evaporative cooling was less effective, but it is a good and cheap possibility to increase the cycle parameters at high temperature and low relative humidity

Análise do perfil de dureza e microestrutura de um aço forjado AISI A2 submetido a tratamento térmico com resfriamento em água

Due to the large use of steel in several processes around the world, there is the increasingly concern to find new materials and/or optimization and improvement of the processes, as the need to reduce the cost and a productivity increase in the primary industry, such as the siderurgy. The rolling is the most used mechanical process in the world and therefore is required the development of new tools in high volume and with optimum characteristics to support the market demand. Forged rolls used are for rolling. These rolls have heat treatment that has the purpose to achieve the appropriated mechanical properties to support the variables of the rolling process. The objective of this work is to analyze the hardness profile and the microstructure a tool steel similar to AISI A2, forged in an opened die process and submitted to heat treatment with water-cooling. The results allowed plotting a hardness profile and performing a microstructure analysis, and whereby to confirm that the heat treatment is not a quenching, but it is a material beneficiation by the hardening of superficial layer, since there is no martensitic microstructure. Therefore, this paper provides the support to future studies about the possibility to perform enhancements in this thermal heat made in the rolls produced at Gerdau Plant in Pindamonhangaba

Estudo sobre a redução do estresse oxidativo em sêmen equino a partir da adição de quercetina nos diluentes de refrigeração e congelação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da centrifugação e filtragem do sêmen bovino sobre a criopreservação espermática

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem e simulação de ciclos a gás com resfriamento de ar na entrada

The optimization of energy generation systems has become a key issue for technological and social development, mainly in developing countries, where the electricity consumption rises sharply. Gas turbine cycle is an electricity generating system, which studies have demonstrated that inlet air cooling increases net power and thermal efficiency. Thus, this study intends to quantify these parameters for environments with different ambient temperature and relative humidity. Two types of air cooling were used: evaporative and absorption systems. The configuration parameters only with the gas turbine cycle were compared to those whose configuration allowed cooling. First, it was analyzed only evaporative cooling. Next, the absorption system was used for analysis. The last configuration mixed these two methods, dividing equally its flow. The results showed that thermal efficiency and net power increase in any case of cooling, with absorption system more advantageous in terms of generated energy, where an increase between 1 and 2 MW was observed, depending on the ambient conditions . When the two methods were working together at low relative humidity, it showed a thermal efficiency increase compared to absorption system, up to 2.4%. Evaporative cooling was less effective, but it is a good and cheap possibility to increase the cycle parameters at high temperature and low relative humidity

Análise do perfil de dureza e microestrutura de um aço forjado AISI A2 submetido a tratamento térmico com resfriamento em água

Due to the large use of steel in several processes around the world, there is the increasingly concern to find new materials and/or optimization and improvement of the processes, as the need to reduce the cost and a productivity increase in the primary industry, such as the siderurgy. The rolling is the most used mechanical process in the world and therefore is required the development of new tools in high volume and with optimum characteristics to support the market demand. Forged rolls used are for rolling. These rolls have heat treatment that has the purpose to achieve the appropriated mechanical properties to support the variables of the rolling process. The objective of this work is to analyze the hardness profile and the microstructure a tool steel similar to AISI A2, forged in an opened die process and submitted to heat treatment with water-cooling. The results allowed plotting a hardness profile and performing a microstructure analysis, and whereby to confirm that the heat treatment is not a quenching, but it is a material beneficiation by the hardening of superficial layer, since there is no martensitic microstructure. Therefore, this paper provides the support to future studies about the possibility to perform enhancements in this thermal heat made in the rolls produced at Gerdau Plant in Pindamonhangaba