Electrospun Contrast Agent-Loaded Fibers for Colon-Targeted MRI

Magnetic resonance imaging is a diagnostic tool used for detecting abnormal organs and tissues, often using Gd(III) complexes as contrast-enhancing agents. In this work, core–shell polymer fibers have been prepared using coaxial electrospinning, with the intent of delivering gadolinium (III) diethylenetriaminepentaacetate hydrate (Gd(DTPA)) selectively to the colon. The fibers comprise a poly(ethylene oxide) (PEO) core loaded with Gd(DTPA), and a Eudragit S100 shell. They are homogeneous, with distinct core–shell phases. The components in the fibers are dispersed in an amorphous fashion. The proton relaxivities of Gd(DTPA) are preserved after electrospinning. To permit easy visualization of the release of the active ingredient from the fibers, analogous materials are prepared loaded with the dye rhodamine B. Very little release is seen in a pH 1.0 buffer, while sustained release is seen at pH 7.4. The fibers thus have the potential to selectively deliver Gd(DTPA) to the colon. Mucoadhesion studies reveal there are strong adhesive forces between porcine colon mucosa and PEO from the core, and the dye-loaded fibers can be successfully used to image the porcine colon wall. The electrospun core–shell fibers prepared in this work can thus be developed as advanced functional materials for effective imaging of colonic abnormalities.

Use of a fluorescence-based approach to assess short-term responses of the alga Pseudokirchneriella subcapitata to metal stress

This work explores the use of fluorescent probes to evaluate the responses of the green alga Pseudokirchneriella subcapitata to the action of three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II) for a short time (6 h). The toxic effect of the metals on algal cells was monitored using the fluorochromes SYTOX Green (SG, membrane integrity), fluorescein diacetate (FDA, esterase activity) and rhodamine 123 (Rh123, mitochondrial membrane potential). The impact of metals on chlorophyll a (Chl a) autofluorescence was also evaluated. Esterase activity was the most sensitive parameter. At the concentrations studied, all metals induced the loss of esterase activity. SG could be used to effectively detect the loss of membrane integrity in algal cells exposed to 0.32 or 1.3 μmol L−1 Cu(II). Rh123 revealed a decrease in the mitochondrial membrane potential of algal cells exposed to 0.32 and 1.3 μmol L−1 Cu(II), indicating that mitochondrial activity was compromised. Chl a autofluorescence was also affected by the presence of Cr(VI) and Cu(II), suggesting perturbation of photosynthesis. In conclusion, the fluorescence-based approach was useful for detecting the disturbance of specific cellular characteristics. Fluorescent probes are a useful diagnostic tool for the assessment of the impact of toxicants on specific targets of P. subcapitata algal cells.

The application of the structural correlation method to determine the reaction coordinate for a putative ring closure reaction

The cr ystal structure of the compound 2-benzoylethylidene-3-(2,4- dibromophenyl)-2,3-dihydro-5-phenyl-l,3,4-thiadiazole* C23H16Br2NZOS (BRMEO) has been determined by using three dimensiona l x-ray diffraction data. The crys tal form is monoclinic, space group P21/c, a = 17.492(4), o -.t' 0 R 0 b =: 16.979(1), c = 14.962(1) A, "X. =o= 90 ',= 106.46(1) , z = 8, graphite-monochromatized Mo~ rad iation, Jl= 0.710J3~, D = 1.62g/cc and o D = 1.65g/cc. The data were col lected on ~ Nonius CAD-4 c diffractometer. The following atoms were made anisotropic: Br, S, N, 0, C7, and C14-C16 for each i ndependent molecu le ; the rest were left isotropic. For 3112 independent refl ec tions with F > 6G\F), R == 0.057. The compound has two independent molecules within the asymmetric unit. Two different conformers were observed which pack well together. /l The S---O interaction distances of 2.493(6) and 2 . 478(7) A were observed for molecules A and B respectively. These values are consistent with earlier findings for 2-benzoylmethylene-3-(2,4-dibromophenyl)- ~~ 2,3-dihydro-5-phenyl-l,3,4-thiadiazole C22H14Br2N20S (BRPHO) and 2-benzoylpropylidene-3-(2,4-dibromophenyl)-2,3-dihydroiii ,'r 5-phenyl-l,3,4-thiadiazole C24H18Br2N20S (BRPETO ) where S---O distances are l ess than the van der Waals (3.251\) but greater than those expected for () a single bond (1.50A). From the results and the literature it appears obvious that the energy/reaction coordinate pathway has a minimum between the end structures (the mono- and bicyclic compounds). * See reference (21) for nomenclature.

Les répercussions de l’insuffisance rénale chronique sur le transport des médicaments

L’insuffisance rénale chronique (IRC) affecte 13 % de la population américaine et son incidence ne cesse d’augmenter. Malgré un ajustement des doses de médicaments administrés en fonction du taux de filtration glomérulaire du patient urémique, près de 40 % des patients reçoivent une dose trop élevée en raison de modifications de l’élimination extrarénale des médicaments chez ces patients. Il est connu que l’IRC affecte l’élimination métabolique des médicaments par les cytochromes P450 et les enzymes de biotransformation de phase II. Nous avons aussi démontré, chez le rat, que l’IRC affecte l’expression et l’activité de transporteurs de médicaments intestinaux entraînant une augmentation de la biodisponibilité de certains médicaments. On retrouve des transporteurs de médicaments dans de nombreux organes comme le foie, les reins et la barrière hématoencéphalique (BHE) où ils jouent des rôles importants dans les éliminations biliaire et rénale et la pénétration des médicaments au cerveau. Le but de ce travail était de mesurer, chez des rats néphrectomisés, les impacts de l’IRC sur l’expression protéique et génique et l’activité des transporteurs de médicaments hépatiques, rénaux et cérébraux. Les transporteurs étudiés sont de la famille des transporteurs ABC (P-glycoprotéine, multidrug-resistance related protein, breast cancer resistance protein) ou des solute carriers (organic anion transporter, organic anion transporting protein). Aussi, une étude réalisée chez l’humain visait à évaluer la pharmacocinétique de deux médicaments : la fexofénadine, un médicament majoritairement transporté, et le midazolam, un substrat du cytochrome P450 3A4, chez des sujets dialysés. Nos résultats montrent que, chez le rat, l’IRC entraîne des modulations de l’expression des transporteurs d’influx et d’efflux hépatiques pouvant entraîner des diminutions du métabolisme hépatique et de l’excrétion biliaire des médicaments. Dans le rein, nous avons démontré des modulations de l’expression des transporteurs de médicaments. Nous avons aussi démontré que l’IRC diminue l’élimination urinaire de la rhodamine 123 et favorise l’accumulation intrarénale de médicaments transportés comme la benzylpénicilline et la digoxine. À la BHE, nous avons démontré des diminutions de l’expression des transporteurs de médicaments. Toutefois, nous n’avons pas observé d’accumulation intracérébrale de trois substrats utilisés (digoxine, doxorubicine et vérapamil) et même une diminution de l’accumulation intracérébrale de la benzylpénicilline. Il semble donc que, malgré les modulations de l’expression des différents transporteurs de médicaments, l’intégrité et la fonction de la BHE soient conservées en IRC. Chez l’humain, nous avons démontré une augmentation de la surface sous la courbe de la fexofénadine chez les sujets dialysés, comparativement aux témoins, suggérant une altération des mécanismes de transport des médicaments chez ces patients. Nous n’avons, toutefois, pas observé de modification de la pharmacocinétique du midazolam chez les patients dialysés, suggérant une activité métabolique normale chez ces patients. Un ou des facteurs s’accumulant dans le sérum des sujets urémiques semblent responsables des modulations de l’expression et de l’activité des transporteurs de médicaments observées chez le rat et l’humain. Ces travaux mettent en évidence une nouvelle problématique chez les sujets urémiques. Nous devons maintenant identifier les mécanismes impliqués afin d’éventuellement développer des stratégies pour prévenir la toxicité et la morbidité chez ces patients.

Développement de nouvelles formulations d’antifongiques et évaluation de l’activité sur Candida spp. et Aspergillus spp.

Les travaux effectués dans le cadre de cette thèse de doctorat avaient pour but de mettre au point des nouvelles formulations d’antifongiques sous forme de nanoparticules polymériques (NP) en vue d’améliorer l’efficacité et la spécificité des traitements antifongiques sur des souches sensibles ou résistantes de Candida spp, d’Aspergillus spp et des souches de Candida albicans formant du biofilm. Dans la première partie de ce travail, nous avons synthétisé et caractérisé un polymère à base de polyester-co-polyéther branché avec du poly(éthylène glycol) (PEG-g-PLA). En plus d’être original et innovant, ce co-polymère a l’avantage d’être non-toxique et de posséder des caractéristiques de libération prolongée. Trois antifongiques couramment utilisés en clinique et présentant une biodisponibilité non optimale ont été choisis, soient deux azolés, le voriconazole (VRZ) et l’itraconazole (ITZ) et un polyène, l’amphotéricine B (AMB). Ces principes actifs (PA), en plus des problèmes d’administration, présentent aussi d’importants problèmes de toxicité. Des NP polymériques encapsulant ces PA ont été préparées par une technique d’émulsion huile-dans-l’eau (H/E) suivie d’évaporation de solvant. Une fois fabriquées, les NP ont été caractérisées et des particules de d’environ 200 nm de diamètre ont été obtenues. Les NP ont été conçues pour avoir une structure coeur/couronne avec un coeur constitué de polymère hydrophobe (PLA) et une couronne hydrophile de PEG. Une faible efficacité de chargement (1,3% m/m) a été obtenue pour la formulation VRZ encapsulé dans des NP (NP/VRZ). Toutefois, la formulation AMB encapsulée dans des NP (NP/AMB) a montré des taux de chargement satisfaisants (25,3% m/m). En effet, le caractère hydrophobe du PLA a assuré une bonne affinité avec les PA hydrophobes, particulièrement l’AMB qui est le plus hydrophobe des agents sélectionnés. Les études de libération contrôlée ont montré un relargage des PA sur plusieurs jours. La formulation NP/AMB a été testée sur un impacteur en cascade, un modèle in vitro de poumon et a permis de démontrer le potentiel de cette formulation à être administrée efficacement par voie pulmonaire. En effet, les résultats sur l’impacteur en cascade ont montré que la majorité de la formulation s’est retrouvée à l’étage de collecte correspondant au niveau bronchique, endroit où se situent majoritairement les infections fongiques pulmonaires. Dans la deuxième partie de ces travaux, nous avons testé les nouvelles formulations d’antifongiques sur des souches planctoniques de Candida spp., d’Aspergillus spp. et des souches de Candida albicans formant du biofilm selon les procédures standardisées du National Committee for Clinical Laboratory Standards (NCCLS). Les souches choisies ont démontré des résistances aux azolés et aux polyènes. Les études d’efficacité in vitro ont permis de prouver hors de tout doute que les nouvelles formulations offrent une efficacité nettement améliorée comparée à l’agent antifongique libre. Pour mettre en lumière si l’amélioration de l’efficacité antifongique était due à une internalisation des NP, nous avons évalué le comportement des NP avec les cellules de champignons. Nous avons procédé à des études qualitatives de microscopie de fluorescence sur des NP marquées avec de la rhodamine (Rh). Tel qu’attendu, les NP ont montré une localisation intracellulaire. Pour exclure la possibilité d’une simple adhésion des NP à la surface des levures, nous avons aussi confirmé leur internalisation en microscopie confocale de fluorescence. Il est important de noter que peu d’études à ce jour ont mis l’accent sur l’élaboration de nouvelles formulations d’antifongiques à base de polymères non toxiques destinées aux traitements des mycoses, donnant ainsi une grande valeur et originalité aux travaux effectués dans cette thèse. Les résultats probants obtenus ouvrent la voie vers une nouvelle approche pour contourner les problèmes de résistances fongiques, un problème de plus en plus important dans le domaine de l’infectiologie.

Laser Induced Fluorescence Based Optical Fiber Probe for Analyzing Bacteria

Optical fiber based laser induced fluorescence (LIF) measurements were carried out using Rhodamine B to analyze two different species of bacteria , a Gram-positive bacteria namely Bacillus smithii , and fibrin alginolvticus, a Gram- negative bacteria . The fiber sensor was clearly able to distinguish between the two species of bacteria . Quenching effect of the dye Rhodamine B by Bacillus smithii was observed . The effect of dye on the samples was also studied in detail.

Laser induced fluorescence based optical fiber probe for analyzing bacteria

Optical fiber based laser induced fluorescence (LIF) measurements were carried out using Rhodamine B to analyze two different species of bacteria , a Gram-positive bacteria namely Bacillus .cmithii , and fibrin alginolvticus, a Gram-' negative bacteria . The fiber sensor was clearly able to distinguish between the two species of bacteria . Quenching effect of the dye Rhodamine B by Bacillus smitltii was observed . The effect of dye on the samples was also studied in detail.

Characterization of Selected Photonic Materials and Systems Using Photoacoustic Technique

The photoacoustic investigations carried out on different photonic materials are presented in this thesis. Photonic materials selected for the investigation are tape cast ceramics, muItilayer dielectric coatings, organic dye doped PVA films and PMMA matrix doped with dye mixtures. The studies are performed by the measurement of photoacoustic signal generated as a result of modulated cw laser irradiation of samples. The gas-microphone scheme is employed for the detection of photoacoustic signal. The different measurements reported here reveal the adaptability and utility of the PA technique for the characterization of photonic materials.Ceramics find applications in the field of microelectronics industry. Tape cast ceramics are the building blocks of many electronic components and certain ceramic tapes are used as thermal barriers. The thermal parameters of these tapes will not be the same as that of thin films of the same materials. Parameters are influenced by the presence of foreign bodies in the matrix and the sample preparation technique. Measurements are done on ceramic tapes of Zirconia, Zirconia-Alumina combination, barium titanate, barium tin titanate, silicon carbide, lead zirconate titanateil'Z'T) and lead magnesium niobate titanate(PMNPT). Various configurations viz. heat reflection geometry and heat transmission geometry of the photoacoustic technique have been used for the evaluation of different thermal parameters of the sample. Heat reflection geometry of the PA cell has been used for the evaluation of thermal effusivity and heat transmission geometry has been made use of in the evaluation of thermal diffusivity. From the thermal diffusivity and thermal effusivity values, thermal conductivity is also calculated. The calculated values are nearly the same as the values reported for pure materials. This shows the feasibility of photoacoustic technique for the thermal characterization of ceramic tapes.Organic dyes find applications as holographic recording medium and as active media for laser operations. Knowledge of the photochemical stability of the material is essential if it has to be used tor any of these applications. Mixing one dye with another can change the properties of the resulting system. Through careful mixing of the dyes in appropriate proportions and incorporating them in polymer matrices, media of required stability can be prepared. Investigations are carried out on Rhodamine 6GRhodamine B mixture doped PMMA samples. Addition of RhB in small amounts is found to stabilize Rh6G against photodegradation and addition of Rh6G into RhB increases the photosensitivity of the latter. The PA technique has been successfully employed for the monitoring of dye mixture doped PMMA sample. The same technique has been used for the monitoring of photodegradation ofa laser dye, cresyl violet doped polyvinyl alcohol also.Another important application of photoacoustic technique is in nondestructive evaluation of layered samples. Depth profiling capability of PA technique has been used for the non-destructive testing of multilayer dielectric films, which are highly reflecting in the wavelength range selected for investigations. Eventhough calculation of thickness of the film is not possible, number of layers present in the system can be found out using PA technique. The phase plot has clear step like discontinuities, the number of which coincides with the number of layers present in the multilayer stack. This shows the sensitivity of PA signal phase to boundaries in a layered structure. This aspect of PA signal can be utilized in non-destructive depth profiling of reflecting samples and for the identification of defects in layered structures.

Thermal lens spectrum of organic dyes using optical parametric oscillator

The wavelength dependence of thermal lens signal from organic dyes are studied using dual beam thermal lens technique. It is found that the profile of thermal lens spectrum widely differ from the conventional absorption spectrum in the case of rhodamine B unlike in the case of crystal violet. This is explained on the basis of varying contribution of nonradiative relaxations from the excited vibronic levels.

Thermal lens technique to study the effect of pH on electronic energy transfer in organic dye mixtures.

The effect of pH on the fluorescence efficiency of fluorescein is evaluated using thermal lens technique. Fluorescence efficiency increases as the sample becomes more and more alkaline. But when fluorescein is mixed with rhodamine B fluorescence quenching of fluorescein takes place with the excitation of rhodamine B. The electronic energy transfer in this mixture is investigated using Optical Parametric Oscillator as the excitation source. The effect of pH on the efficiency of energy transfer in fluorescein–rhodamine B mixture is presented.

Thermal lens spectrum of organic dyes using optical parametric oscillator

The wavelength dependence of thermal lens signal from organic dyes are studied using dual beam thermal lens technique. It is found that the profile of thermal lens spectrum widely differ from the conventional absorption spectrum in the case of rhodamine B unlike in the case of crystal violet. This is explained on the basis of varying contribution of nonradiative relaxations from the excited vibronic levels.

Propagation characteristics and wavelength tuning of amplified spontaneous emission from dye-doped polymer.

The propagation characteristics of amplified spontaneous emission (ASE) through a rhodamine 6 G-doped polymethyl methacrylate freestanding film waveguide were studied. This was done by shifting the excitation stripe horizontally along a transversely pumped waveguide. By this method, we could tune the ASE wavelength. The maximum tunability thus obtained was ~18 nm with a pump stripe length of 6 mm.

Fluorescence characterization and gain studies on a dye-doped graded index polymer optical-fiber preform

Preparation of an appropriate optical-fiber preform is vital for the fabrication of graded-index polymer optical fibers (GIPOF), which are considered to be a good choice for providing inexpensive high bandwidth data links, for local area networks and telecommunication applications. Recent development of the interfacial gel polymerization technique has caused a dramatic reduction in the total attenuation in GIPOF, and this is one of the potential methods to prepare fiber preforms for the fabrication of dye-doped polymer-fiber amplifiers. In this paper, the preparation of a dye-doped graded-index poly(methyl methacrylate) (PMMA) rod by the interfacial gel polymerization method using a PMMA tube is reported. An organic compound of high-refractive index, viz., diphenyl phthalate (DPP), was used to obtain a graded-index distribution, and Rhodamine B (Rh B), was used to dope the PMMA rod. The refractive index profile of the rod was measured using an interferometric technique and the index exponent was estimated. The single pass gain of the rod was measured at a pump wavelength of 532 nm. The extent of doping of the Rh B in the preform was studied by axially exciting a thin slice of the rod with white light and measuring the spatial variation of the fluorescence intensity across the sample.

The influence of organophosphorus pesticide-methylparathion on protein, lipid metabolism and detoxifying enzymes in rohu (Labeo rohita)

Methylparathion (MP) is an organophosphorus insecticide used world wide in agriculture due to its high activity against a broad spectrum of insect pests. The aim of the study is to understand the effect of methylparathion on the lipid peroxidation, detoxifying and antioxidant enzymes namely catalase (CAT), glutathione peroxidase (GPx), superoxide dismutase (SOD), glutathione Stransferase (GST), total reduced glutathione (GSH), lipid peroxidation (LPO), acetylcholinesterase (AChE) and disease diagnostic marker enzymes in liver, sarcoplasmic (SP) and myofirbirllar (MF) proteins in muscles, lipids and histopathlogical changes in various organs of Labeo rohita of size 75 i 6g at lethal and sublethal level of exposure. The probit analysis showed that the lethal concentration (LC 50%) for 24, 48, 72 and 96h were 15.5mg/L, 12.3mg/L, 11.4mg/L and 10.2mg/L respectively which is much higher compared to the LC50 for juvenile fish. The LPO level and GST activity increased five folds and two folds respectively on exposure to methylparathion at 10.2 mg/L and the level of the enzymes increased, on sub lethal exposure beyond 0.25mg/L. AChE activity was inhibited by 74% at a concentration of 1.8mg/L and 90% at 5.4mg/L. The disease diagnostic marker enzymes AST, ALT, ALP and LDH increased by about 2, 3 ,3 and 2 folds respectively at pesticide concentration of 10.2mg/L when compared to control. On sub lethal exposure, however the enzymes did not show any significant changes up to 0.5mg/L. At a concentration of 10.2 mg/L, there was a three fold increase in myofibrillar proteins while the increase in sarcoplasmic protein was above 1.5 fold. On sub lethal exposure, significant alteration was noticed up to 30 days up to 1mg/L of methylparathion concentration. Further exposure up to 45 days increased sarcoplasmic proteins (upto 0.5mg/L). ln the case of myofibrillar proteins, noticeable changes were observed at 1mg/L concentration right from 15th day. The cholesterol content in brain tissues increased by about 27% at methylparathion concentration of 5.4 mglL. However at 0.25mg/L sub lethal concentration, no significant alteration was observed in enzyme activity, muscle proteins, lipids and histopathology of the tissues. The results suggest that methylparathion has the potential to induce oxidative stress in fish, and that liver, muscle and brains are more sensitive organs of Labeo rohita, with poor antioxidant potentials at higher concentrations of the pesticide. The various parameters studied in this investigation can also be used as biomarkers of methylparathion exposure.

" Studies on Laser induced Phatothermal Phenomena in Selected Organic Compounds and Fullerenes"

In the pre—laser era it was difficult to believe that the optical properties of a medium depend upon the intensity of the radiation incident on it. The basis for this conclusion is that the electric field strength associated with the conventional light sources used before the advent of lasers was much smaller than (103 V/cm) the field sttrengths of atomic or interatomic fields (2 107 —- 10” V/cm). The radiation with such low intensity is not able to affect atomic fields to the extent of changing optical parameters. The invention of laser in 1960 was a turning point. The high degree of coherence of the laser radiation provides high spatial concentration of optical power. With the availability of the femtosecond lasers it has become possible to get extremely high peak powers 2 1013 W/cmz). At such high fields, the relationship between electric ‘polarization P and the electric field strength E ceases to be linear and several nonlinear effects begin to occur. Nonlinear absorption, a branch of nonlinear optics, refers to the interaction between radiation and matter accompanied by absorption of more than one photon. Nonlinear absorption has acquired great importance after the invention of high power lasers. One of the objectives of the present work is to investigate the nonlinear absorption processes occurring in fullerene, selected organic solvents and laser dyes. Fullerenes and laser dyes were chosen because of their highly nonlinear behaviour. Fullerenes, the most beautiful among molecules, offer fascinating field of research owinglto their significant structural properties. As toluene, benzene and carbon disulphide are themost widely used solvents for fullerenes, it seems important to study the nonlinear properties of these liquids as well. Like fullerenes, laser dyes also possess highly delocalized 7r electrons which are responsible for their nonlinear absorption. Dye lasers were the fulfillment of an experimenter’s pipe dream - to have a laser that is easily tunable over a wide range of wavelengths. A better understandingof the photophysical properties of laser dyes can significantly enhance the development and technology of dye lasers. We studied the nonlinear absorption properties of two rhodamine dyes to have some insight into their nonlinear optical properties.