Anàlisi factorial confirmatòria per a variables categòriques: Aplicació al qüestionari de discapacitat WHODAS-II

Objective: To describe the methodology of Confirmatory Factor Analyis for categorical items and to apply this methodology to evaluate the factor structure and invariance of the WHO-Disability Assessment Schedule (WHODAS-II) questionnaire, developed by the World HealthOrganization.Methods: Data used for the analysis come from the European Study of Mental Disorders(ESEMeD), a cross-sectional interview to a representative sample of the general population of 6 european countries (n=8796). Respondents were administered a modified version of theWHODAS-II, that measures functional disability in the previous 30 days in 6 differentdimensions: Understanding and Communicating; Self-Care, Getting Around, Getting Along withOthers, Life Activities and Participation. The questionnaire includes two types of items: 22severity items (5 points likert) and 8 frequency items (continuous). An Exploratory factoranalysis (EFA) with promax rotation was conducted on a random 50% of the sample. Theremaining half of the sample was used to perform a Confirmatory Factor Analysis (CFA) inorder to compare three different models: (a) the model suggested by the results obtained in theEFA; (b) the theoretical model suggested by the WHO with 6 dimensions; (c) a reduced modelequivalent to model b where 4 of the frequency items are excluded. Moreover, a second orderfactor was also evaluated. Finally, a CFA with covariates was estimated in order to evaluatemeasurement invariance of the items between Mediterranean and non-mediterranean countries.Results: The solution that provided better results in the EFA was that containing 7 factors. Twoof the frequency items presented high factor loadings in the same factor, and one of thempresented factor loadings smaller than 0.3 with all the factors. With regard to the CFA, thereduced model (model c) presented the best goodness of fit results (CFI=0.992,TLI=0.996,RMSEA=0.024). The second order factor structure presented adequate goodness of fit (CFI=0.987,TLI=0.991, RMSEA=0.036). Measurement non-invariance was detected for one of the items of thequestionnaire (FD20 ¿ Embarrassment due to health problems).Conclusions: AFC confirmed the initial hypothesis about the factorial structure of the WHODAS-II in 6factors. The second order factor supports the existence of a global dimension of disability. The use of 4of the frequency items is not recommended in the scoring of the corresponding dimensions.

Looking for orders of magnitude : five essays in trade and the environment and economic geography

General Summary Although the chapters of this thesis address a variety of issues, the principal aim is common: test economic ideas in an international economic context. The intention has been to supply empirical findings using the largest suitable data sets and making use of the most appropriate empirical techniques. This thesis can roughly be divided into two parts: the first one, corresponding to the first two chapters, investigates the link between trade and the environment, the second one, the last three chapters, is related to economic geography issues. Environmental problems are omnipresent in the daily press nowadays and one of the arguments put forward is that globalisation causes severe environmental problems through the reallocation of investments and production to countries with less stringent environmental regulations. A measure of the amplitude of this undesirable effect is provided in the first part. The third and the fourth chapters explore the productivity effects of agglomeration. The computed spillover effects between different sectors indicate how cluster-formation might be productivity enhancing. The last chapter is not about how to better understand the world but how to measure it and it was just a great pleasure to work on it. "The Economist" writes every week about the impressive population and economic growth observed in China and India, and everybody agrees that the world's center of gravity has shifted. But by how much and how fast did it shift? An answer is given in the last part, which proposes a global measure for the location of world production and allows to visualize our results in Google Earth. A short summary of each of the five chapters is provided below. The first chapter, entitled "Unraveling the World-Wide Pollution-Haven Effect" investigates the relative strength of the pollution haven effect (PH, comparative advantage in dirty products due to differences in environmental regulation) and the factor endowment effect (FE, comparative advantage in dirty, capital intensive products due to differences in endowments). We compute the pollution content of imports using the IPPS coefficients (for three pollutants, namely biological oxygen demand, sulphur dioxide and toxic pollution intensity for all manufacturing sectors) provided by the World Bank and use a gravity-type framework to isolate the two above mentioned effects. Our study covers 48 countries that can be classified into 29 Southern and 19 Northern countries and uses the lead content of gasoline as proxy for environmental stringency. For North-South trade we find significant PH and FE effects going in the expected, opposite directions and being of similar magnitude. However, when looking at world trade, the effects become very small because of the high North-North trade share, where we have no a priori expectations about the signs of these effects. Therefore popular fears about the trade effects of differences in environmental regulations might by exaggerated. The second chapter is entitled "Is trade bad for the Environment? Decomposing worldwide SO2 emissions, 1990-2000". First we construct a novel and large database containing reasonable estimates of SO2 emission intensities per unit labor that vary across countries, periods and manufacturing sectors. Then we use these original data (covering 31 developed and 31 developing countries) to decompose the worldwide SO2 emissions into the three well known dynamic effects (scale, technique and composition effect). We find that the positive scale (+9,5%) and the negative technique (-12.5%) effect are the main driving forces of emission changes. Composition effects between countries and sectors are smaller, both negative and of similar magnitude (-3.5% each). Given that trade matters via the composition effects this means that trade reduces total emissions. We next construct, in a first experiment, a hypothetical world where no trade happens, i.e. each country produces its imports at home and does no longer produce its exports. The difference between the actual and this no-trade world allows us (under the omission of price effects) to compute a static first-order trade effect. The latter now increases total world emissions because it allows, on average, dirty countries to specialize in dirty products. However, this effect is smaller (3.5%) in 2000 than in 1990 (10%), in line with the negative dynamic composition effect identified in the previous exercise. We then propose a second experiment, comparing effective emissions with the maximum or minimum possible level of SO2 emissions. These hypothetical levels of emissions are obtained by reallocating labour accordingly across sectors within each country (under the country-employment and the world industry-production constraints). Using linear programming techniques, we show that emissions are reduced by 90% with respect to the worst case, but that they could still be reduced further by another 80% if emissions were to be minimized. The findings from this chapter go together with those from chapter one in the sense that trade-induced composition effect do not seem to be the main source of pollution, at least in the recent past. Going now to the economic geography part of this thesis, the third chapter, entitled "A Dynamic Model with Sectoral Agglomeration Effects" consists of a short note that derives the theoretical model estimated in the fourth chapter. The derivation is directly based on the multi-regional framework by Ciccone (2002) but extends it in order to include sectoral disaggregation and a temporal dimension. This allows us formally to write present productivity as a function of past productivity and other contemporaneous and past control variables. The fourth chapter entitled "Sectoral Agglomeration Effects in a Panel of European Regions" takes the final equation derived in chapter three to the data. We investigate the empirical link between density and labour productivity based on regional data (245 NUTS-2 regions over the period 1980-2003). Using dynamic panel techniques allows us to control for the possible endogeneity of density and for region specific effects. We find a positive long run elasticity of density with respect to labour productivity of about 13%. When using data at the sectoral level it seems that positive cross-sector and negative own-sector externalities are present in manufacturing while financial services display strong positive own-sector effects. The fifth and last chapter entitled "Is the World's Economic Center of Gravity Already in Asia?" computes the world economic, demographic and geographic center of gravity for 1975-2004 and compares them. Based on data for the largest cities in the world and using the physical concept of center of mass, we find that the world's economic center of gravity is still located in Europe, even though there is a clear shift towards Asia. To sum up, this thesis makes three main contributions. First, it provides new estimates of orders of magnitudes for the role of trade in the globalisation and environment debate. Second, it computes reliable and disaggregated elasticities for the effect of density on labour productivity in European regions. Third, it allows us, in a geometrically rigorous way, to track the path of the world's economic center of gravity.

On the industry experience premium and labor mobility

[cat] Hi ha evidència que l'experiència es remunera diferentment segons la indústria. Proposem un model teòric que explica aquestes diferències. Suposem que la mobilitat de treballadors aporta coneixement extern a l'empresa i això augmenta la seva productivitat. Els resultats mostren que l'experiència és millor remunerada en les indústries amb costos de mobilitat baixos, amb molt aprenentatge (learning-by-doing) i alt nivell tecnològic. A més, trobem una relació en forma de U entre la remuneració de l'experiència i el nivell d'absorció de coneixement extern, la substitutibilitat entre diferents tipus de treballadors i la varietat de coneixement dins la indústria. Els resultats són consistents amb l'evidència que les indústries intensives en I and D remuneren millor l'experiència.

Firm's network capability and innovation performance: evidences from China hi-tech industry

ABSTRACT : A firm's competitive advantage can arise from internal resources as well as from an interfirm network. -This dissertation investigates the competitive advantage of a firm involved in an innovation network by integrating strategic management theory and social network theory. It develops theory and provides empirical evidence that illustrates how a networked firm enables the network value and appropriates this value in an optimal way according to its strategic purpose. The four inter-related essays in this dissertation provide a framework that sheds light on the extraction of value from an innovation network by managing and designing the network in a proactive manner. The first essay reviews research in social network theory and knowledge transfer management, and identifies the crucial factors of innovation network configuration for a firm's learning performance or innovation output. The findings suggest that network structure, network relationship, and network position all impact on a firm's performance. Although the previous literature indicates that there are disagreements about the impact of dense or spare structure, as well as strong or weak ties, case evidence from Chinese software companies reveals that dense and strong connections with partners are positively associated with firms' performance. The second essay is a theoretical essay that illustrates the limitations of social network theory for explaining the source of network value and offers a new theoretical model that applies resource-based view to network environments. It suggests that network configurations, such as network structure, network relationship and network position, can be considered important network resources. In addition, this essay introduces the concept of network capability, and suggests that four types of network capabilities play an important role in unlocking the potential value of network resources and determining the distribution of network rents between partners. This essay also highlights the contingent effects of network capability on a firm's innovation output, and explains how the different impacts of network capability depend on a firm's strategic choices. This new theoretical model has been pre-tested with a case study of China software industry, which enhances the internal validity of this theory. The third essay addresses the questions of what impact network capability has on firm innovation performance and what are the antecedent factors of network capability. This essay employs a structural equation modelling methodology that uses a sample of 211 Chinese Hi-tech firms. It develops a measurement of network capability and reveals that networked firms deal with cooperation between, and coordination with partners on different levels according to their levels of network capability. The empirical results also suggests that IT maturity, the openness of culture, management system involved, and experience with network activities are antecedents of network capabilities. Furthermore, the two-group analysis of the role of international partner(s) shows that when there is a culture and norm gap between foreign partners, a firm must mobilize more resources and effort to improve its performance with respect to its innovation network. The fourth essay addresses the way in which network capabilities influence firm innovation performance. By using hierarchical multiple regression with data from Chinese Hi-tech firms, the findings suggest that there is a significant partial mediating effect of knowledge transfer on the relationships between network capabilities and innovation performance. The findings also reveal that the impacts of network capabilities divert with the environment and strategic decision the firm has made: exploration or exploitation. Network constructing capability provides a greater positive impact on and yields more contributions to innovation performance than does network operating capability in an exploration network. Network operating capability is more important than network constructing capability for innovative firms in an exploitation network. Therefore, these findings highlight that the firm can shape the innovation network proactively for better benefits, but when it does so, it should adjust its focus and change its efforts in accordance with its innovation purposes or strategic orientation.

Thermoset Composite Concrete Reinforcement, HR-325, Part 1, 1992

The feasibility of substituting fibercomposite (FC) (thermoset) pavement dowels for steel pavement dowels was investigated in this research project. Load transfer capacity, flexural capacity, and material properties were examined. The objectives of Part 1 of this final report included the shear behavior and strength deformations of FC dowel bars without aging. Part 2 will contain the aging effects. This model included the effects of modulus of elasticity for the pavement dowel and concrete, dowel diameter, subgrade stiffness, and concrete compressive strength. An experimental investigation was carried out to establish the modulus of dowel support which is an important parameter for the analysis of dowels. The experimental investigation included measured deflections, observed behavioral characteristics, and failure mode observations. An extensive study was performed on various shear testing procedures. A modified Iosipescu shear method was selected for the test procedure. Also, a special test frame was designed and fabricated for this procedure. The experimental values of modulus of support for shear and FC dowels were used for arriving at the critical stresses and deflections for the theoretical model developed. Different theoretical methods based on analyses suggested by Timoshenko, Friberg, Bradbury, and Westergaard were studied and a comprehensive theoretical model was developed. The fibercomposite dowels were found to provide strengths and behavioral characteristics that appear promising as a potential substitute for steel dowels.

Syndrome d'hyperstimulation ovarienne [The syndrome of ovarian hyperstimulation].

The ovarian hyperstimulation syndrome (SHO) can be defined as an iatrogenic pathology induced by active substances administered for controlling follicular maturation and ovulation. The etiology, the physiopathology, the diagnostic and therapeutic methods available are discussed. A theoretical model, based on clinical data, allows identification of a set of criteria which should help determining prospectively the chances of development of such a pathology.

Estimation of the noisy component of anatomical backgrounds.

The knowledge of the relationship that links radiation dose and image quality is a prerequisite to any optimization of medical diagnostic radiology. Image quality depends, on the one hand, on the physical parameters such as contrast, resolution, and noise, and on the other hand, on characteristics of the observer that assesses the image. While the role of contrast and resolution is precisely defined and recognized, the influence of image noise is not yet fully understood. Its measurement is often based on imaging uniform test objects, even though real images contain anatomical backgrounds whose statistical nature is much different from test objects used to assess system noise. The goal of this study was to demonstrate the importance of variations in background anatomy by quantifying its effect on a series of detection tasks. Several types of mammographic backgrounds and signals were examined by psychophysical experiments in a two-alternative forced-choice detection task. According to hypotheses concerning the strategy used by the human observers, their signal to noise ratio was determined. This variable was also computed for a mathematical model based on the statistical decision theory. By comparing theoretical model and experimental results, the way that anatomical structure is perceived has been analyzed. Experiments showed that the observer's behavior was highly dependent upon both system noise and the anatomical background. The anatomy partly acts as a signal recognizable as such and partly as a pure noise that disturbs the detection process. This dual nature of the anatomy is quantified. It is shown that its effect varies according to its amplitude and the profile of the object being detected. The importance of the noisy part of the anatomy is, in some situations, much greater than the system noise. Hence, reducing the system noise by increasing the dose will not improve task performance. This observation indicates that the tradeoff between dose and image quality might be optimized by accepting a higher system noise. This could lead to a better resolution, more contrast, or less dose.

Thermoset Composite Concrete Reinforcement, HR-325, Part 2, 1992

This is the second part of the final report submitted to the Iowa Department of Transportation. Part 1 contained a comparison of unaged fiber composite and steel dowels and derivation of the appropriate theoretical model for analyzing the results. Part 2 of this final report covers the theoretical and experimental models for accelerated aging of fiber composite reinforcing bars and dowels cast in a concrete environment. Part 2 contains results from testing of unaged and aged fiber composite dowels and steel dowels, in addition to unaged and aged fiber composite reinforcing bars. Additional tests have been performed on unaged dowels (both steel and fibercomposite) to verify results from Part 1 and to keep the testing program consistent. Slight modifications have been made to the dowel specimens presented in Part 1. These modifications are noted in the Section 3.4 of this report. The flexural modulus of elasticity for the FC dowel bar given in Part 1 of the final report (Table 3. 2) was for the incorrect structural shape (non-circular cross section). The value is corrected and given in Part 2 of the final report (Table 3.4 for the.modulus of elasticity supplied by the manufacturer, and Tables 3. 5 and 3. 6 for experimentally determined modulus of elasticities) • The value in Part 1 was not used for any analysis of the FC dowel bars.

Design Methodology for Corrugated Metal Pipe Tiedowns, HR-332, Phase 1, 1993

Questionnaires were sent to transportation agencies in all 50 states in the U.S., to Puerto Rico, and all provinces in Canada asking about their experiences with uplift problems of - corrugated metal pipe (CMP). Responses were received from 52 agencies who reported 9 failures within the last 5 years. Some agencies also provided design standards for tiedowns to resist uplift. There was a wide variety in restraining forces used; for example for a pipe 6 feet in diameter, the resisting force ranged from 10 kips to 66 kips. These responses verified the earlier conclusion based on responses from Iowa county engineers that a potential uplift danger exists.when end restraint is not provided for CMP and that existing designs have an unclear theoretical or experimental basis. In an effort to develop more rational design standards, the longitudinal stiffness of three CMP ranging from 4 to 8 feet in diameter were measured in the laboratory. Because only three tests were conducted, a theoretical model to evaluate the stiffness of pipes of a variety of gages and corrugation geometries was also developed. The experimental results indicated a "stiffness" EI in the range of 9.11 x 10^5 k-in^2 to 34.43 x 10^5 k-in^2 for the three pipes with the larger diameter pipes having greater stiffness. The theoretical model developed conservatively estimates these stiffnesses.

An insight into co-operativism

The concept of co-operativism is analysed in this report. As an introduction to the subject, the values that socially friendly businesses work with are mentioned, as well as, the basic differences with regard to capitalist companies. In order to broaden the model, seven basic principles that drive such companies are analysed. Recently, due to the economic crisis, many capitalist companies have changed their way of running the business and have opted for cooperatives. Therefore, the steps they have to follow to become part of this view will be considered. So as to introduce a more critical view, benefits and drawbacks of cooperative companies will be borne in mind. In addition, no theoretical model is complete if real examples are not provided, thus in the final part, four companies will be studied. The first one being a company that has always been part of a group of cooperatives and which has enjoyed positive results all over; the second one, a company that has experienced the benefits of leaving the group; the third one, the cornerstone of such group, whose effort to relaunch the company have failed; and the final one, an acquired company whose future is uncertain due to its parent company's decline. To conclude, the final section is going to be devoted to heighten the problems that cooperatives have and which may have compromised their status as alternative models to capitalism.

Development of Bridge Load Testing Process for Load Evaluation, TR-445, 2003

Recent reports indicate that of the over 25,000 bridges in Iowa, slightly over 7,000 (29%) are either structurally deficient or functionally obsolete. While many of these bridges may be strengthened or rehabilitated, some simply need to be replaced. Before implementing one of these options, one should consider performing a diagnostic load test on the structure to more accurately assess its load carrying capacity. Frequently, diagnostic load tests reveal strength and serviceability characteristics that exceed the predicted codified parameters. Usually, codified parameters are very conservative in predicting lateral load distribution characteristics and the influence of other structural attributes. As a result, the predicted rating factors are typically conservative. In cases where theoretical calculations show a structural deficiency, it may be very beneficial to apply a "tool" that utilizes a more accurate theoretical model which incorporates field-test data. At a minimum, this approach results in more accurate load ratings and many times results in increased rating factors. Bridge Diagnostics, Inc. (BDI) developed hardware and software that are specially designed for performing bridge ratings based on data obtained from physical testing. To evaluate the BDI system, the research team performed diagnostic load tests on seven "typical" bridge structures: three steel-girder bridges with concrete decks, two concrete slab bridges, and two steel-girder bridges with timber decks. In addition, a steel-girder bridge with a concrete deck previously tested and modeled by BDI was investigated for model verification purposes. The tests were performed by attaching strain transducers on the bridges at critical locations to measure strains resulting from truck loading positioned at various locations on the bridge. The field test results were used to develop and validate analytical rating models. Based on the experimental and analytical results, it was determined that bridge tests could be conducted relatively easy, that accurate models could be generated with the BDI software, and that the load ratings, in general, were greater than the ratings, obtained using the codified LFD Method (according to AASHTO Standard Specifications for Highway Bridges).

Between manualized treatments and principle-guided psychotherapy: illustration in the case of Caroline

My case study of "Caroline"-a 26 year old presenting with depression, PTSD symptoms, and a history of sexual abuse as a teenager-represents a "third way" between (1) a strict adherence to a manualized treatment, and (2) a principle-guided therapy, in which the therapy follows particular theoretical concepts, but depends on the therapist's clinical judgement to flexibly apply them to the individual case. Specifically, in my therapy with Caroline (Kramer, 2009), I employed Foa and Rothbaum's (1998) cognitive-behavioral, "Prolonged Exposure" (PE) manual for PTSD, but deviated from it in certain ways based upon my evaluation of Caroline's individualized goals and reactions using Grawe and Caspar's "Plan Analysis," which is a cross-theoretical model for assessment and treatment planning. In their commentaries on my case study of Caroline, Caspar (2009) and Haldimann-Balli (see Appendix in Kramer, 2009) support my use of this third way. On the other hand, the other commentators-Muller (2009) and Hembree and Brinen (2009)-critique my handling of the case, arguing that strict adherence to the Foa and Rothbaum manual would have resulted in a more cost-effective therapy. In this article, I respond to the important issues raised by the four commentators.

La construcción narrativa de la identidad en un contexto educativo intercultural = The narrative construction of identity in a intercultural educative setting

En este trabajo se expone e ilustra un modelo teórico para entender las funciones de la identidad, así como los mecanismospsicosociales asociados a su construcción: “Modelo Evolutivo y Funcional de la Identidad Mediada” (MEBIM). La identidad, mediada narrativamente, cumple una función personal orientada a la dirección de la propia vida, así como una función sociocultural vinculada a la búsqueda de reconocimiento de los derechos de los grupos sociales a los que uno se siente apegado. Se ilustran los factores asociados a la construcción de la identidad personal (sí mismos posibles, transiciones vitales, vínculo afectivo) y sociocultural (acción-transformación e identificación simbólica) a partir de 12 historias de vida realizadas con mestizos e indígenasde la Universidad Intercultural de Chiapas (México). Se sugiere que en contextos educativos formales, como la escuela o la Universidad, se deben propiciar narrativas personales y socioculturales con el objetivo de optimizar la identidad en un mundo a la vez globalizado y plural

Social inequalities of functioning and perceived health in Switzerland: a representative cross-sectional analysis.

Many people worldwide live with a disability, i.e. limitations in functioning. The prevalence is expected to increase due to demographic change and the growing importance of non-communicable disease and injury. To date, many epidemiological studies have used simple dichotomous measures of disability, even though the WHO's International Classification of Functioning, Disability, and Health (ICF) provides a multi-dimensional framework of functioning. We aimed to examine associations of socio-economic status (SES) and social integration in 3 core domains of functioning (impairment, pain, limitations in activity and participation) and perceived health. We conducted a secondary analysis of representative cross-sectional data of the Swiss Health Survey 2007 including 10,336 female and 8,424 male Swiss residents aged 15 or more. Guided by a theoretical ICF-based model, 4 mixed effects Poisson regressions were fitted in order to explain functioning and perceived health by indicators of SES and social integration. Analyses were stratified by age groups (15-30, 31-54, ≥55 years). In all age groups, SES and social integration were significantly associated with functional and perceived health. Among the functional domains, impairment and pain were closely related, and both were associated with limitations in activity and participation. SES, social integration and functioning were related to perceived health. We found pronounced social inequalities in functioning and perceived health, supporting our theoretical model. Social factors play a significant role in the experience of health, even in a wealthy country such as Switzerland. These findings await confirmation in other, particularly lower resourced settings.

Determinants of science-based cooperation: evidence in a sample of small and micro firms

We study the determining factors of cience-based cooperation in the case of small and micro firms. In this research, we propose an analytical framework based on the resource-based view of the firm and we identify a set of organisational characteristics, which we classify as internal, external and structural factors. Each factor can be linked to at least one reason, from the firm¿s point of view, to cooperate with universities and public research centres. Each reason can, in turn, be used as an indicator of a firm¿s organisational needs or organisational capacities. In order to validate the theoretical model, we estimate a logistic regression that models the propensity to participate in science-based cooperation activities within a sample of 285 small and micro firms located in Barcelona. The results show the key role played by the absorptive capacity of new and small companies.