Multiple robots formation manoeuvring and collision avoidance strategy

This paper presents a multiple robots formation manoeuvring and its collision avoidance strategy. The direction priority sequential selection algorithm is employed to achieve the raw path, and a new algorithm is then proposed to calculate the turning compliant waypoints supporting the multi-robot formation manoeuvre. The collision avoidance strategy based on the formation control is presented to translate the collision avoidance problem into the stability problem of the formation. The extension-decomposition-aggregation scheme is next applied to solve the formation control problem and subsequently achieve the collision avoidance during the formation manoeuvre. Simulation study finally shows that the collision avoidance problem can be conveniently solved if the stability of the constructed formation including unidentified objects can be satisfied.

A survey of control architectures for autonomous mobile robots

MEDEIROS, Adelardo A. D.A survey of control architectures for autonomous mobile robots. J. Braz. Comp. Soc., Campinas, v. 4, n. 3, abr. 1998 .Disponível em: Acesso: 27 set. 2010.

Decision Making for Teams of Mobile Robots

In the past years, we could observe a significant amount of new robotic systems in science, industry, and everyday life. To reduce the complexity of these systems, the industry constructs robots that are designated for the execution of a specific task such as vacuum cleaning, autonomous driving, observation, or transportation operations. As a result, such robotic systems need to combine their capabilities to accomplish complex tasks that exceed the abilities of individual robots. However, to achieve emergent cooperative behavior, multi-robot systems require a decision process that copes with the communication challenges of the application domain. This work investigates a distributed multi-robot decision process, which addresses unreliable and transient communication. This process composed by five steps, which we embedded into the ALICA multi-agent coordination language guided by the PROViDE negotiation middleware. The first step encompasses the specification of the decision problem, which is an integral part of the ALICA implementation. In our decision process, we describe multi-robot problems by continuous nonlinear constraint satisfaction problems. The second step addresses the calculation of solution proposals for this problem specification. Here, we propose an efficient solution algorithm that integrates incomplete local search and interval propagation techniques into a satisfiability solver, which forms a satisfiability modulo theories (SMT) solver. In the third decision step, the PROViDE middleware replicates the solution proposals among the robots. This replication process is parameterized with a distribution method, which determines the consistency properties of the proposals. In a fourth step, we investigate the conflict resolution. Therefore, an acceptance method ensures that each robot supports one of the replicated proposals. As we integrated the conflict resolution into the replication process, a sound selection of the distribution and acceptance methods leads to an eventual convergence of the robot proposals. In order to avoid the execution of conflicting proposals, the last step comprises a decision method, which selects a proposal for implementation in case the conflict resolution fails. The evaluation of our work shows that the usage of incomplete solution techniques of the constraint satisfaction solver outperforms the runtime of other state-of-the-art approaches for many typical robotic problems. We further show by experimental setups and practical application in the RoboCup environment that our decision process is suitable for making quick decisions in the presence of packet loss and delay. Moreover, PROViDE requires less memory and bandwidth compared to other state-of-the-art middleware approaches.

Shape-based compliance control for snake robots

I serpenti robot sono una classe di meccanismi iper-ridondanti che appartiene alla robotica modulare. Grazie alla loro forma snella ed allungata e all'alto grado di ridondanza possono muoversi in ambienti complessi con elevata agilità. L'abilità di spostarsi, manipolare e adattarsi efficientemente ad una grande varietà di terreni li rende ideali per diverse applicazioni, come ad esempio attività di ricerca e soccorso, ispezione o ricognizione. I robot serpenti si muovono nello spazio modificando la propria forma, senza necessità di ulteriori dispositivi quali ruote od arti. Tali deformazioni, che consistono in movimenti ondulatori ciclici che generano uno spostamento dell'intero meccanismo, vengono definiti andature. La maggior parte di esse sono ispirate al mondo naturale, come lo strisciamento, il movimento laterale o il movimento a concertina, mentre altre sono create per applicazioni specifiche, come il rotolamento o l'arrampicamento. Un serpente robot con molti gradi di libertà deve essere capace di coordinare i propri giunti e reagire ad ostacoli in tempo reale per riuscire a muoversi efficacemente in ambienti complessi o non strutturati. Inoltre, aumentare la semplicità e ridurre il numero di controllori necessari alla locomozione alleggerise una struttura di controllo che potrebbe richiedere complessità per ulteriori attività specifiche. L'obiettivo di questa tesi è ottenere un comportamento autonomo cedevole che si adatti alla conformazione dell'ambiente in cui il robot si sta spostando, accrescendo le capacità di locomozione del serpente robot. Sfruttando la cedevolezza intrinseca del serpente robot utilizzato in questo lavoro, il SEA Snake, e utilizzando un controllo che combina cedevolezza attiva ad una struttura di coordinazione che ammette una decentralizzazione variabile del robot, si dimostra come tre andature possano essere modificate per ottenere una locomozione efficiente in ambienti complessi non noti a priori o non modellabili.

Using assistive robots to promote inclusive education

Purpose: This paper describes the development and test of physical and virtual integrated augmentative manipulation and communication assistive technologies (IAMCATs) that enable children with motor and speech impairments to manipulate educational items by controlling a robot with a gripper, while communicating through a speech generating device. Method: Nine children with disabilities, nine regular and nine special education teachers participated in the study. Teachers adapted academic activities so they could also be performed by the children with disabilities using the IAMCAT. An inductive content analysis of the teachers’ interviews before and after the intervention was performed. Results: Teachers considered the IAMCAT to be a useful resource that can be integrated into the regular class dynamics respecting their curricular planning. It had a positive impact on children with disabilities and on the educational community. However, teachers pointed out the difficulties in managing the class, even with another adult present, due to the extra time required by children with disabilities to complete the activities. Conclusions: The developed assistive technologies enable children with disabilities to participate in academic activities but full inclusion would require another adult in class and strategies to deal with the additional time required by children to complete the activities. IMPLICATIONS FOR REHABILITATION - Integrated augmentative manipulation and communication assistive technologies are useful resources to promote the participation of children with motor and speech impairments in classroom activities. - Virtual tools, running on a computer screen, may be easier to use but further research is needed in order to evaluate its effectiveness when compared to physical tools. - Full participation of children with motor and speech impairments in academic activities using these technologies requires another adult in class and adequate strategies to manage the extra time the child with disabilities may require to complete the activities.

A survey of control architectures for autonomous mobile robots

MEDEIROS, Adelardo A. D.A survey of control architectures for autonomous mobile robots. J. Braz. Comp. Soc., Campinas, v. 4, n. 3, abr. 1998 .Disponível em: Acesso: 27 set. 2010.

ENABLING HARDWARE TECHNOLOGIES FOR AUTONOMY IN TINY ROBOTS: CONTROL, INTEGRATION, ACTUATION

The last two decades have seen many exciting examples of tiny robots from a few cm3 to less than one cm3. Although individually limited, a large group of these robots has the potential to work cooperatively and accomplish complex tasks. Two examples from nature that exhibit this type of cooperation are ant and bee colonies. They have the potential to assist in applications like search and rescue, military scouting, infrastructure and equipment monitoring, nano-manufacture, and possibly medicine. Most of these applications require the high level of autonomy that has been demonstrated by large robotic platforms, such as the iRobot and Honda ASIMO. However, when robot size shrinks down, current approaches to achieve the necessary functions are no longer valid. This work focused on challenges associated with the electronics and fabrication. We addressed three major technical hurdles inherent to current approaches: 1) difficulty of compact integration; 2) need for real-time and power-efficient computations; 3) unavailability of commercial tiny actuators and motion mechanisms. The aim of this work was to provide enabling hardware technologies to achieve autonomy in tiny robots. We proposed a decentralized application-specific integrated circuit (ASIC) where each component is responsible for its own operation and autonomy to the greatest extent possible. The ASIC consists of electronics modules for the fundamental functions required to fulfill the desired autonomy: actuation, control, power supply, and sensing. The actuators and mechanisms could potentially be post-fabricated on the ASIC directly. This design makes for a modular architecture. The following components were shown to work in physical implementations or simulations: 1) a tunable motion controller for ultralow frequency actuation; 2) a nonvolatile memory and programming circuit to achieve automatic and one-time programming; 3) a high-voltage circuit with the highest reported breakdown voltage in standard 0.5 μm CMOS; 4) thermal actuators fabricated using CMOS compatible process; 5) a low-power mixed-signal computational architecture for robotic dynamics simulator; 6) a frequency-boost technique to achieve low jitter in ring oscillators. These contributions will be generally enabling for other systems with strict size and power constraints such as wireless sensor nodes.

Exploring coordination-driven self-assembly with autonomous chemical robots

The work presented herein focused on the automation of coordination-driven self assembly, exploring methods that allow syntheses to be followed more closely while forming new ligands, as part of the fundamental study of the digitization of chemical synthesis and discovery. Whilst the control and understanding of the principle of pre-organization and self-sorting under non-equilibrium conditions remains a key goal, a clear gap has been identified in the absence of approaches that can permit fast screening and real-time observation of the reaction process under different conditions. A firm emphasis was thus placed on the realization of an autonomous chemical robot, which can not only monitor and manipulate coordination chemistry in real-time, but can also allow the exploration of a large chemical parameter space defined by the ligand building blocks and the metal to coordinate. The self-assembly of imine ligands with copper and nickel cations has been studied in a multi-step approach using a self-built flow system capable of automatically controlling the liquid-handling and collecting data in real-time using a benchtop MS and NMR spectrometer. This study led to the identification of a transient Cu(I) species in situ which allows for the formation of dimeric and trimeric carbonato bridged Cu(II) assemblies. Furthermore, new Ni(II) complexes and more remarkably also a new binuclear Cu(I) complex, which usually requires long and laborious inert conditions, could be isolated. The study was then expanded to the autonomous optimization of the ligand synthesis by enabling feedback control on the chemical system via benchtop NMR. The synthesis of new polydentate ligands has emerged as a result of the study aiming to enhance the complexity of the chemical system to accelerate the discovery of new complexes. This type of ligand consists of 1-pyridinyl-4-imino-1,2,3-triazole units, which can coordinate with different metal salts. The studies to test for the CuAAC synthesis via microwave lead to the discovery of four new Cu complexes, one of them being a coordination polymer obtained from a solvent dependent crystallization technique. With the goal of easier integration into an automated system, copper tubing has been exploited as the chemical reactor for the synthesis of this ligand, as it efficiently enhances the rate of the triazole formation and consequently promotes the formation of the full ligand in high yields within two hours. Lastly, the digitization of coordination-driven self-assembly has been realized for the first time using an in-house autonomous chemical robot, herein named the ‘Finder’. The chemical parameter space to explore was defined by the selection of six variables, which consist of the ligand precursors necessary to form complex ligands (aldehydes, alkineamines and azides), of the metal salt solutions and of other reaction parameters – duration, temperature and reagent volumes. The platform was assembled using rounded bottom flasks, flow syringe pumps, copper tubing, as an active reactor, and in-line analytics – a pH meter probe, a UV-vis flow cell and a benchtop MS. The control over the system was then obtained with an algorithm capable of autonomously focusing the experiments on the most reactive region (by avoiding areas of low interest) of the chemical parameter space to explore. This study led to interesting observations, such as metal exchange phenomena, and also to the autonomous discovery of self assembled structures in solution and solid state – such as 1-pyridinyl-4-imino-1,2,3-triazole based Fe complexes and two helicates based on the same ligand coordination motif.

Análisis narratológico comparativo de los cuentos “La fosa numerada”, de Melitón Barba; “Los robots deben ser atentos”, de Álvaro Menen Desleal; y “La muerte de churruca”, de José María Méndez

Finalmente se realiza el análisis de las muestras elegidas con la finalidad de identificar si los aspectos del método de Barthes se cumplen a cabalidad y qué tipo de discrepancias surgen en cada interpretación, si es que existen se comprobarán por medio de la comparación entre ellas lo cual permitirá obtener resultados para verificar la vigencia de los métodos a través del tiempo, visualizando y sustentando el tema de este trabajo, además de contribuir en futuras investigaciones de la temática

An idiotypic immune network as a short-term learning architecture for mobile robots

A combined Short-Term Learning (STL) and Long-Term Learning (LTL) approach to solving mobile robot navigation problems is presented and tested in both real and simulated environments. The LTL consists of rapid simulations that use a Genetic Algorithm to derive diverse sets of behaviours. These sets are then transferred to an idiotypic Artificial Immune System (AIS), which forms the STL phase, and the system is said to be seeded. The combined LTL-STL approach is compared with using STL only, and with using a handdesigned controller. In addition, the STL phase is tested when the idiotypic mechanism is turned off. The results provide substantial evidence that the best option is the seeded idiotypic system, i.e. the architecture that merges LTL with an idiotypic AIS for the STL. They also show that structurally different environments can be used for the two phases without compromising transferability.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Generación de trayectorias y evaluación de desempeño de robots manipuladores

Actualmente, en los procesos de fabricación industrial los robots manipuladores son componentes esenciales, esto se debe a las diversas tareas que son capa es de realizar, tales como: ensamble, soldadura, manipulación de objetos, dispensación, entre otras. Sin embargo, di has aplicaciones son para escenarios geométricos limitados y simplificados, además la programación es compleja, por lo que se consume mucho tiempo en la programación. Entonces, cuando el volumen de producción es bajo o está en continuo cambio, sigue siendo necesaria la intervención de humanos expertos para realizar estas tareas. De acuerdo a lo anterior, en esta tesis se propone una metodología basada en sensores de unidad de medición inercial, en inglés Inertial Measurement Units (IMU), y fusión de sensores para la adquisición de las trayectorias realizadas por un humano, estimación de orientación en dos dimensiones y estimación de posición en 3 dimensiones. Además, se involucra el modelado de robots manipuladores, generación de trayectorias, control cinemático empleado en la programación del robot, y por último una evaluación de desempeño del movimiento del robot basado en índices de desempeño. Los resultados experimentales obtenidos muestran que la metodología aplicada es capaz de estimar la trayectoria (en posición y orientación) a partir de los datos adquiridos de la trayectoria realizada por un humano sin el uso de Sistemas de Visión Computacional (SVC). El propósito principal de esta investigación es el desarrollo de una metodología, en la cual los datos coordenados de las trayectorias realizadas por humanos expertos puedan ser emuladas lo más preciso posible por robots manipuladores, sin consumir demasiado tiempo en la programación manual de posición y movimiento del robot en cada punto de la trayectoria deseada.