Characterization of legacy organic carbon in a culturally eutrophic lake : the role of the historic carbon deposition in the time course and extent of lake recovery

The time course of lake recovery after a reduction in external loading of nutrients is often controlled by conditions in the sediment. Remediation of eutrophication is hindered by the presence of legacy organic carbon deposits, that exert a demand on the terminal electron acceptors of the lake and contribute to problems such as internal nutrient recycling, absence of sediment macrofauna, and flux of toxic metal species into the water column. Being able to quantify the timing of a lake’s response requires determination of the magnitude and lability, i.e., the susceptibility to biodegradation, of the organic carbon within the legacy deposit. This characterization is problematic for organic carbon in sediments because of the presence of different fractions of carbon, which vary from highly labile to refractory. The lability of carbon under varied conditions was tested with a bioassay approach. It was found that the majority of the organic material found in the sediments is conditionally-labile, where mineralization potential is dependent on prevailing conditions. High labilities were noted under oxygenated conditions and a favorable temperature of 30 °C. Lability decreased when oxygen was removed, and was further reduced when the temperature was dropped to the hypolimnetic average of 8° C . These results indicate that reversible preservation mechanisms exist in the sediment, and are able to protect otherwise labile material from being mineralized under in situ conditions. The concept of an active sediment layer, a region in the sediments in which diagenetic reactions occur (with nothing occurring below it), was examined through three lines of evidence. Initially, porewater profiles of oxygen, nitrate, sulfate/total sulfide, ETSA (Electron Transport System Activity- the activity of oxygen, nitrate, iron/manganese, and sulfate), and methane were considered. It was found through examination of the porewater profiles that the edge of diagenesis occurred around 15-20 cm. Secondly, historical and contemporary TOC profiles were compared to find the point at which the profiles were coincident, indicating the depth at which no change has occurred over the (13 year) interval between core collections. This analysis suggested that no diagenesis has occurred in Onondaga Lake sediment below a depth of 15 cm. Finally, the time to 99% mineralization, the t99, was viewed by using a literature estimate of the kinetic rate constant for diagenesis. A t99 of 34 years, or approximately 30 cm of sediment depth, resulted for the slowly decaying carbon fraction. Based on these three lines of evidence , an active sediment layer of 15-20 cm is proposed for Onondaga Lake, corresponding to a time since deposition of 15-20 years. While a large legacy deposit of conditionally-labile organic material remains in the sediments of Onondaga Lake, it becomes clear that preservation, mechanisms that act to shield labile organic carbon from being degraded, protects this material from being mineralized and exerting a demand on the terminal electron acceptors of the lake. This has major implications for management of the lake, as it defines the time course of lake recovery following a reduction in nutrient loading.

Production of liquid core-polymer shell microcapsules

Polylactide (PLA) is a biodegradable polymer that has been used in particle form for drug release, due to its biocompatibility, tailorable degradation kinetics, and desirable mechanical properties. Active pharmaceutical ingredients (APIs) may be either dissolved or encapsulated within these biomaterials to create micro- or nanoparticles. Delivery of an AIP within fine particles may overcome solubility or stability issues that can result in early elimination or degradation of the AIP in a hostile biological environment. Furthermore, it is a promising method for controlling the rate of drug delivery and dosage. The goal of this project is to develop a simple and cost-effective device that allows us to produce monodisperse micro- and nanocapsules with controllable size and adjustable sheath thickness on demand. To achieve this goal, we have studied the dual-capillary electrospray and pulsed electrospray. Dual-capillary electrospray has received considerable attention in recent years due to its ability to create core-shell structures in a single-step. However, it also increases the difficulty of controlling the inner and outer particle morphology, since two simultaneous flows are required. Conventional electrospraying has been mainly conducted using direct-current (DC) voltage with little control over anything but the electrical potential. In contrast, control over the input voltage waveform (i.e. pulsing) in electrospraying offers greater control over the process variables. Poly(L-lactic acid) (PLLA) microspheres and microcapsules were successfully fabricated via pulsed-DC electrospray and dual-capillary electrospray, respectively. Core shell combinations produced include: Water/PLLA, PLLA/polyethylene glycol (PEG), and oleic Acid/PLLA. In this study, we designed a novel high-voltage pulse forming network and a set of new designs for coaxial electrospray nozzles. We also investigated the effect of the pulsed voltage characteristics (e.g. pulse frequency, pulse amplitude and pulse width) on the particle’s size and uniformity. We found that pulse frequency, pulse amplitude, pulse width, and the combinations of these factors had a statistically significant effect on the particle’s size. In addition, factors such as polymer concentration, solvent type, feed flow rate, collection method, temperature, and humidity can significantly affect the size and shape of the particles formed.

A novel mechanism for regulation of calmodulin signaling by RC3

RC3, also known as neurogranin, is a small neuronal IQ domain protein whose only known function is to bind calmodulin (CaM). The hypothesis tested in this work was that RC3 alters the dynamics of the interaction of Ca 2+-CaM with CaM-kinase II, so that there is less CaM-kinase II activation for a given Ca2+ stimulus. To evaluate this hypothesis, we investigated the affinity and kinetics of the interactions of CaM with Ca 2+, RC3 and CaM-kinase II. We quantitated the interaction of the four CaM-kinase II isoforms with CaM and found that the KD for binding of CaM to CaM-kinase II ranged from 7 nM to 60 nM. Using stopped-flow fluorimetry, we determined the kinetics of the interaction of Ca2+-CaM with αCaM-kinase II, and found that the association rate constant is 2.1 × 10 M −1s−1 and the dissociation rate constant is 1.6 s−1. We investigated the effects of RC3 and αCaM-kinase II on the affinity of CaM for Ca2+ and found that both proteins alter the rate of dissociation of Ca2+ from CaM. RC3 increases the rate of dissociation of Ca2+ from the C-terminal binding sites of CaM from 9 s−1 to ∼500 s−1 , while αCaM-kinase II causes a decrease in the rate of dissociation from all four Ca2+ binding sites. Measurement of the rate of dissociation of Ca2+ from CaM in the presence of both RC3 and αCaM-kinase II revealed a role for RC3 in accelerating the dissociation of the Ca 2+-CaM-αCaM-kinase II complex at the end of a Ca2+ signal. We characterized the interaction of RC3 with apo-CaM and Ca 2+-CaM and found that the KD for both of these interactions is about 1 μM. We also directly tested whether RC3 slowed the dynamics of the binding of CaM to αCaM-kinase II and found that RC3 had no effect for large changes in Ca2+, and a modest effect for small changes in Ca2+ levels. Our overall conclusion is that the ability of RC3 to alter the interaction of Ca2+ with CaM allows RC3 to alter the dynamics of interaction of CaM with Ca2+-dependent targets such as CaM-kinase II. ^

ASSESSMENT OF SKELETAL MUSCLE BLOOD FLOW AND GLUCOSE METABOLISM WITH POSITRON EMITTING RADIONUCLIDES

In order to evaluate factors regulating substrate metabolism in vivo positron emitting radionuclides were used for the assessment of skeletal muscle blood flow and glucose utilization. The potassium analog, Rb-82 was used to measure skeletal muscle blood flow and the glucose analog, 18-F-2-deoxy-2-fluoro-D-glucose (FDG) was used to examine the kinetics of skeletal muscle transport and phosphorylation.^ New Zealand white rabbits' blood flow ranged from 1.0-70 ml/min/100g with the lowest flows occurring under baseline conditions and the highest flows were measured immediately after exercise. Elevated plasma glucose had no effect on increasing blood flow, whereas high physiologic to pharmacologic levels of insulin doubled flow as measured by the radiolabeled microspheres, but a proportionate increase was not detected by Rb-82. The data suggest that skeletal muscle blood flow can be measured using the positron emitting K+ analog Rb-82 under low flow and high flow conditions but not when insulin levels in the plasma are elevated. This may be due to the fact that insulin induces an increase in the Na+/K+-ATPase activity of the cell indirectly through a direct increase in the Na+/H+pump activity. This suggests that the increased cation pump activity counteracts the normal decrease in extraction seen at higher flows resulting in an underestimation of flow as measured by rubidium-82.^ Glucose uptake as measured by FDG employed a three compartment mathematical model describing the rates of transport, countertransport and phosphorylation of hexose. The absolute values for the metabolic rate of FDG were found to be an order of magnitude higher than those reported by other investigators. Changes noted in the rate constant for transport (k1) were found to disagree with the a priori information on the effects of insulin on skeletal muscle hexose transport. Glucose metabolism was however, found to increase above control levels with administration of insulin and electrical stimulation. The data indicate that valid measurements of skeletal muscle glucose transport and phosphorylation using the positron emitting glucose analog FDG requires further model application and biochemical validation. (Abstract shortened with permission of author.) ^

Sulphur contents and partition of iron in ODP Leg 112 sediments

Porewaters in site 680 Peru Margin sediments contain dissolved sulfide over a depth of approximately 70 m which, at a sedimentation rate of 0.005 cm/yr, gives a sediment exposure time to dissolved sulfide of about 1.4 Myr. Reactions with dissolved sulfide cause the site 680 sediments to show a progressive decrease in a poorly-reactive silicate iron fraction, defined as the difference between iron extracted by dithionite (FeD) at room temperature and that extracted by boiling concentrated HCl (FeH), normalised to the total iron content (FeT). Straight line plots are obtained for ln[(FeH - FeD)/FeT] against time of burial, from which a first order rate constant of 0.29 1/Myr (equivalent to a half-life of 2.4 Myr) can be derived for the sulfidation of this silicate iron. Comparable half-lives are also found for the same poorly-reactive iron fraction in the nearby site 681 and 684 sediments. This silicate Fe fraction comprises 0.8-1.0% Fe, only 30-60% of which reacts even with 1.5-3 million years exposure to dissolved sulfide. Diagenetic models based on porewater concentrations of sulfate and sulfide, and solid phase iron contents, at site 680 are consistent in indicating that this poorly-reactive iron fraction is only sulfidized on a million year time scale. Silicate iron not extracted by HCl can be regarded as unreactive towards dissolved sulfide on the time scales encountered in marine sediments.

Ba, Al and SO4 concentrations in sediments and pore fluid of ODP Leg 127/128 samples

The barium distribution in sediments and pore fluids from five sites drilled in the Japan Sea have been used to illustrate the geochemical behavior of this element as it pertains paleoproductivity reconstructions, diagenetic remobilization, and barite precipitation in authigenic fronts. Sites where sulfate is depleted in the pore fluids also show high concentrations of dissolved barium, reflecting dissolution of biogenic barite. The high rate of sedimentation at Sites 798 and 799 results in a rapid sulfate depletion, which in turn leads to barite dissolution and reprecipitation in diagenetic fronts. The dissolved barium distribution at these sites has been used to quantify the rate of barite dissolution; we estimate a first-order rate constant for barite dissolution to be 2*10**-6/s at Site 799 and 2*10**-7/s at Site 798. Authigenic barite has been documented in sediments from Site 799 at 323 meters below seafloor by scanning electron microscopy and X-ray fluorescence analysis. These results indicate barite precipitation in a diagenetic front near the zone of sulfate depletion by upward migration of dissolved barium and downward diffusion of sulfate. Barite precipitation has also been inferred at Sites 796 and 798 based on sedimentary and dissolved barium distributions. Sulfate is not depleted in the pore fluids of Site 794. The lack of diagenetic remobilization of biogenic barium at this site preserves the high barium signal associated with the high-productivity sequences deposited during the late Miocene to Pliocene. Significantly, the organic carbon distribution does not indicate high accumulation rates during the periods of high opal and barium deposition. Instead, higher organic carbon accumulations are recorded in the Quaternary and middle Miocene sequences; intervals that are also characterized by deposition of siliciclastic turbidites. The presence of a terrestrial component in the organic carbon record renders barium a more useful indicator than organic carbon for paleoproductivity reconstructions in this marginal sea.

Nitrate limitation and ocean acidification interact with UV-B to reduce photosynthetic performance in the diatom

It has been proposed that ocean acidification (OA) will interact with other environmental factors to influence the overall impact of global change on biological systems. Accordingly we investigated the influence of nitrogen limitation and OA on the physiology of diatoms by growing the diatom Phaeodactylum tricornutum Bohlin under elevated (1000 µatm; high CO2- HC) or ambient (390 µatm; low CO2-LC) levels of CO2 with replete (110 µmol/L; high nitrate-HN) or reduced (10 ?mol/L; low nitrate-LN) levels of NO3- and subjecting the cells to solar radiation with or without UV irradiance to determine their susceptibility to UV radiation (UVR, 280-400 nm). Our results indicate that OA and UVB induced significantly higher inhibition of both the photosynthetic rate and quantum yield under LN than under HN conditions. UVA or/and UVB increased the cells' non-photochemical quenching (NPQ) regardless of the CO2 levels. Under LN and OA conditions, activity of superoxide dismutase and catalase activities were enhanced, along with the highest sensitivity to UVB and the lowest ratio of repair to damage of PSII. HC-grown cells showed a faster recovery rate of yield under HN but not under LN conditions. We conclude therefore that nutrient limitation makes cells more prone to the deleterious effects of UV radiation and that HC conditions (ocean acidification) exacerbate this effect. The finding that nitrate limitation and ocean acidification interact with UV-B to reduce photosynthetic performance of the diatom P. tricornutum implies that ocean primary production and the marine biological C pump will be affected by OA under multiple stressors.

(Table 2) 230Th, 230Th xs and 232Th concentrations in dissolved, particulate and total (dissolved+small particles) for all KEOPS stations, Marion Dufresne cruise MD145

In the context of the KErguelen Ocean and Plateau compared Study (KEOPS, 19 January-13 February 2005), particle dynamics were investigated using thorium isotope measurements over and off the Kerguelen plateau. Dissolved and particulate 230Th and 232Th samples were collected at nine stations. Dissolved excess 230Th concentrations (230Thxs) vary from 0.5 to 20.8 fg/kg and particulate 230Thxs concentrations from 0.1 to 10.0 fg/kg. Dissolved and particulate 232Th concentration ranges are 16.8-450.2 pg/kg and 3.8-502.8 pg/kg, respectively. The 230Thxs concentrations increase linearly with depth down to the bottom at most of the plateau stations and down to 1000 m at the off-plateau stations. This linear trend is observed down to the bottom (1550 m) at Kerfix, the open-ocean "upstream" station located west of the Kerguelen plateau. A simple reversible scavenging model applied to these data allowed the estimation of adsorption rate constant (k1~=0.2-0.8 per year), desorption rate constant (k-1~=1-8 per year) and partition coefficients (average K=0.16±0.07). Calculated particle settling velocities S deduced from this simple model are ca. 500 m/year at most of the plateau stations and 800 m/year at all the off-plateau stations. The plateau settling velocities are relatively low for such a productive site, compared to the surrounding HNLC areas. The difference might reflect the fact that lateral advection is neglected in this model. Taking this advection into account allows the reconstruction of the observed 230Thxs linear distributions, but only if faster settling velocities are considered. This implies that the 1D model strongly underestimates the settling velocity of the particles. In the deep layers, the occurrence of intense boundary scavenging along the escarpment due to bottom sediment re-suspension and interaction with a nepheloid layer, yielding a removal of ?50% of the Th stock along the northwestward transect, is suggested.

Limited effects of increased CO2 and temperature on metal and radionuclide bioaccumulation in a sessile invertebrate, the oyster Crassostrea gigas

This study investigated the combined effects of reduced pH and increased temperature on the capacities of the Pacific cupped oyster Crassostrea gigas to bioconcentrate radionuclide and metals. Oysters were exposed to dissolved radiotracers (110mAg, 241Am, 109Cd,57Co,54Mn, and 65Zn) at three pH (7.5, 7.8, 8.1) and two temperatures (21 and 24°C) under controlled laboratory conditions. Although calcifying organisms are recognized as particularly vulnerable to ocean acidification, the oyster did not accumulate differently the studied metals when exposed under the different pH conditions. However, temperature alone or in combination with pH somewhat altered the bioaccumulation of the studied elements. At pH 7.5, Cd was accumulated with an uptake rate constant twofold higher at 24°C than 21°C. Bioaccumulation of Mn was significantly affected by an interactive effect between seawater pH and temperature, with a decreased uptake rate at pH 7.5 when temperature increased (27 ± 1 vs. 17 ± 1 /day at 21 and 24°C, respectively). Retention of Co and Mn tended also to decrease at the same pH with decreasing temperature. Neither pH nor temperature affected strongly the elements distribution between shell and soft tissues. Significant effects of pH were found on the bioaccessibility of Mn, Zn, and 241Am during experimental in vitro simulation of human digestion.

Long-term foliar persistence and efficacy of spinosad against beet armyworm under greenhouse conditions.

BACKGROUND: The immediate lethality caused by spinosad has been widely studied on Spodoptera exigua (H ¿ ubner). However, long-term effects can also provide valuable information on insecticide toxic action. Here, the persistence of spinosad on Capsicum annuum L. foliage and the lethal and sublethal effects of greenhouse-aged foliar residues of this insecticide on third instars of S. exigua are reported. RESULTS: Foliage was collected at 0, 3, 5, 10, 20, 30, 40 and 50 days after application, and spinosad residues were measured. Residues decreased over time according to first-order kinetics. The average rate constant and half-life of disappearance were 4.44×10?3 and156 daysand5.80×10?3 and120 days for60and120 mg L?1 respectively. Larval mortalitygradually decreased, corresponding to the residues, but was still appreciable (35 and 65% for 60 and 120 mg L?1 respectively) when the larvae were fed with foliage collected 50 days after treatment. Subsequently, pupal development was reduced and varied between 20 and 60% and between 21 and 41% for 60 and 120 mg L?1, respectively, in all ages of leaf residues that were bioassayed. At all time points, the consumption rate by the larvae was reduced between 62 and 84% for both concentrations that were bioassayed. CONCLUSION: It is concluded that, under the present greenhouse conditions, the degradation of spinosad was slower than that reported by other authors in the field, and, because of that, its residues could cause lethal and sublethal effects to S. exigua larvae.

CO2 capture by absorption into aqueous tertiary amine solution

The aim of this research is to obtain the absorption rate of CO2 into aqueous solution of N,N- di methyl ethanolamine and into aqueous solution of Triethylene diamine and to demonstrate the importance of absorption of CO2 in nowadays by discussing global warming and greenhouse effect. It is also discussed the current situation of China focusing in the latest steps this country has recently made. In the experimental part of this work, the two tertiary amine solutions will absorb CO2 in a Lewis type cell, measuring the pressure change during the reactions take place. The temperature will be between 35 degree and 70 degree Celsius. The results of both solutions, concentrations of 0.5 and 1.0 mol per liter, are discussed and a single value of the rate constant is given for the first time along with some others parameters.

Temperature dependence of amyloid β-protein fibrillization

Fibrillogenesis of the amyloid β-protein (Aβ) is believed to play a central role in the pathogenesis of Alzheimer’s disease. Previous studies of the kinetics of Aβ fibrillogenesis showed that the rate of fibril elongation is proportional to the concentration of monomers. We report here the study of the temperature dependence of the Aβ fibril elongation rate constant, ke, in 0.1 M HCl. The rate of fibril elongation was measured at Aβ monomer concentrations ranging from 50 to 400 μM and at temperatures from 4°C to 40°C. Over this temperature range, ke increases by two orders of magnitude. The temperature dependence of ke follows the Arrhenius law, ke = A exp (−EA/kT). The preexponential factor A and the activation energy EA are ≈6 × 1018 liter/(mol·sec) and 23 kcal/mol, respectively. Such a high value of EA suggests that significant conformational changes are associated with the binding of Aβ monomers to fibril ends.

In vitro selection of self-cleaving RNAs with a low pH optimum

RNAs that undergo a rapid site-specific cleavage at low pH have been selected by in vitro selection (the SELEX process). The cleavage does not require the addition of any divalent metal ions, and is in fact inhibited by divalent metal ions, spermine, or high concentrations of monovalent metal ions. This low pH catalyzed cleavage results in a 2′,3′-cyclic phosphate at the 3′ end and a free hydroxyl at the 5′ end. The reaction proceeds with a calculated rate of 1.1 min−1 at room temperature in cacodylate buffer at pH 5.0. The rate of cleavage is dependent on the pH and shows an optimum around pH 4.0. The rate constant is independent of RNA concentration, indicating to an intramolecular reaction. Autocatalytic cleavage at low pH, in the absence of a metal ion requirement, adds to the reaction possibilities that may have existed on the prebiotic earth.