Occurrence and sensitivity profile of extended spectrum beta-lactamase-producing Enterobacteriaceae at a tertiary hospital in Southern Brazil

Abstract: INTRODUCTION: Nosocomial infections are closely associated with antimicrobial drug resistance. One of the most important mechanisms of resistance to β-lactam antibiotics is the production of extended spectrum β-lactamases (ESBLs). The objective of the present study was to evaluate the prevalence and antimicrobial susceptibility profile of ESBL-producing strains and to assess the evolution of antimicrobial drug resistance between 2007 and 2013 at the Hospital São Vicente de Paulo, Passo Fundo, State of Rio Grande do Sul, Brazil. METHODS: We conducted a descriptive, observational, cross-sectional study. Bacterial culture was performed from January to December 2013. The antimicrobial susceptibility profile of these cultures was determined using the disk diffusion method. Phenotypic screening for ESBL production was performed using the disk approximation method. RESULTS : We analyzed a total of 19,112 cultures, 11.5% of which were positive for Enterobacteriaceae. Of these, 30.3% of the isolates were positive for ESBL production, and the most prevalent species was Klebsiella sp. (37.5%). Over 95% of these isolates showed reduced susceptibility to all cephalosporins, aztreonam, and amoxicillin/clavulanic acid. The isolates also showed high sensitivity to the following antimicrobials: amikacin, meropenem, and piperacillin/tazobactam. Overall, the resistance rates among ESBL-producing Enterobacteriaceae decreased from 2007 to 2013. CONCLUSIONS : In our hospital, the increased sensitivity to certain antimicrobial agents seems to be directly related to the implementation of improvements in the methods to prevent and control nosocomial infections in addition to the natural development of other resistance mechanisms.

Chagas disease: morbidity profile in an endemic area of Northeastern Brazil

Abstract: INTRODUCTION : This study evaluated the clinical forms and manifestation severities of Chagas disease among serologically reactive individuals from Western Rio Grande do Norte (Northeastern Brazil). METHODS : This cross-sectional study included 186 adults who were evaluated using electrocardiography, echocardiography, chest radiography, and contrast radiography of the esophagus and colon. A clinical-epidemiological questionnaire was also used. RESULTS : The indeterminate, cardiac, digestive, and cardiodigestive clinical forms of Chagas disease were diagnosed in 51.6% (96/186), 32.2% (60/186), 8.1% (15/186) and 8.1% (15/186) of the participants, respectively. Heart failure (functional classes I-IV) was detected in 7.5% (14/186) of the participants, and 36.4% (24/66), 30.3% (20/66), 15.2% (10/66), 13.6% (9/66), and 4.5% (3/66) of the patients were at stage A, B1, B2, C, and D, respectively. Dilated cardiomyopathy and electrocardiographic changes were detected in 10.2% (19/186) and 48.1% (91/186) of the participants, respectively. Apical aneurysm was diagnosed in 10.8% (20/186) of the participants, and other changes in the segmental myocardial contractility of the left ventricle were diagnosed in 33.9% (63/186) of the participants. Megaesophagus (groups I-IV) was observed in 7% (13/186) of the participants, megacolon (grades 1-3) was detected in12.9% (24/186) of the participants, and both organs were affected in 29.2% (7/24) of the megacolon cases. CONCLUSIONS : We detected various clinical forms of Chagas disease (including the digestive form). Our findings indicate that clinical symptoms alone may not be sufficient to exclude or confirm cardiac and/or digestive damage, and the number of patients with symptomatic clinical forms may be underestimated.

Effect of clarithromycin on the cell profile of bronchoalveolar lavage fluid in mice with neutrophil-predominant lung disease

OBJECTIVE: Macrolide antibiotics have anti-inflammatory properties in lung diseases. The aim of this study was to investigate the effect of clarithromycin in pulmonary cellular inflammatory response in mice. METHOD: Eight adult Swiss mice were studied. All animals received an intranasal challenge (80 µL) with dead Pseudomonas aeruginosa (1.0 x 10(12) CFU/mL). Bronchoalveolar lavage was performed 2 days later, with total cell count and differential cell analysis. The study group (n = 4) received clarithromycin treatment (50 mg/kg/day, intraperitoneal) for 5 days. Treatment was initiated 2 days before intranasal challenge. RESULTS: There was no significant difference in total cell count between the groups (mean: 2.0 x 10(6) and 1.3 x 10(6), respectively). In both groups, there was a predominance of neutrophils. However, the study group had a higher percentage of lymphocytes in the bronchoalveolar lavage than the control group (median of 19% vs 2.5%, P = .029). CONCLUSION: Clarithromycin alters the cytological pattern of bronchoalveolar lavage of Swiss mice with neutrophil pulmonary inflammation, significantly increasing the percentage of lymphocytes.

Influence of nephrotic state on the infectious profile in childhood idiopathic nephrotic syndrome

Patients with idiopathic nephrotic syndrome present alterations in their cellular and humoral immune reactions that predispose them to the development of infectious processes. PURPOSE: To characterize the infectious processes in patients with idiopathic nephrotic syndrome. PATIENTS AND METHODS: Ninety-two children and adolescents with idiopathic nephrotic syndrome were assessed retrospectively. The types of infection were grouped as follows: upper respiratory tract infections; pneumonia; skin infections; peritonitis; diarrhea; urinary tract infection ; herpes virus; and others. The patients were divided into 2 groups: Group I (steroid-responsive) n = 75, with 4 subgroups-IA (single episode) n = 10, IB (infrequent relapsers) n = 5, IC (frequent relapsers) n = 14, and ID (steroid-dependent) n = 46; and Group II (steroid-resistant) n = 17. The incidence-density of infection among the patients was assessed throughout the follow-up period. Comparisons for each group and subgroup were done during the periods of negative and nephrotic proteinuria. RESULTS: The analysis revealed a greater incidence-density of infections during the period of nephrotic proteinuria in all the groups and subgroups, with the exception of subgroup IA. During the period of nephrotic proteinuria, subgroups IC, ID, and Group II presented a greater incidence-density of infections as compared to subgroup IA. For the period of negative proteinuria, there was no difference in the incidence-density of infections between the groups and subgroups. Upper respiratory tract infections were the most frequent infectious processes. CONCLUSION: The nephrotic condition, whether as part of a course of frequent relapses, steroid dependence, or steroid resistance, conferred greater susceptibility to infection among the patients with idiopathic nephrotic syndrome. The results of this study suggest that the best preventive action against infection in this disease is to control the nephrotic state.

Comparative analysis of Spanish Banks’ Standalone credit profile

The paper studies the relationship between four differently rated bank’s financial profile and their standalone credit rating issued by Moody’s. The comparative analysis shows an example that despite their pricing power and geographical coverage, larger banks do not necessarily have better credit ratings. Instead, business model and risk appetite seem to be the defining factors of banks’ vulnerability to shocks, such as the Spanish real estate crisis. The risk-return relationship is also identified in the banks’ fundamentals meaning that while expansionary strategy in riskier asset classes enhances margins, it also potentially distorts the credit risk profile.

Electric vehicle assistant based in driver profile

This paper presents the outcomes of a research work consisting in the development of an Electric Vehicle Assistant (EVA), which creates and stores a driver profile where are contained the driving behaviours related with the EV energy consumption, the EV battery charging information, and the performed routes. This is an application for mobile devices that is able to passively track the driver behaviour and to access several information related with the EV in real time. It is also proposed a range prediction approach based on probability to take into account unpredictable effects of personal driving style, traffic or weather.

A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10-20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation.

Industrial engineering and management curriculum profile: Developing a framework of competences

This paper presents a framework of competences developed for Industrial Engineering and Management that can be used as a tool for curriculum analysis and design, including the teaching and learning processes as well as the alignment of the curriculum with the professional profile. The framework was applied to the Industrial Engineering and Management program at University of Minho (UMinho), Portugal, and it provides an overview of the connection between IEM knowledge areas and the competences defined in its curriculum. The framework of competences was developed through a process of analysis using a combination of methods and sources for data collection. The framework was developed according to four main steps: 1) characterization of IEM knowledge areas; 2) definition of IEM competences; 3) survey; 4) application of the framework at the IEM curriculum. The findings showed that the framework is useful to build an integrated vision of the curriculum. The most visible aspect in the learning outcomes of IEM program is the lack of balance between technical and transversal competences. There was not almost any reference to the transversal competences and it is fundamentally concentrated on Project-Based Learning courses. The framework presented in this paper provides a contribution to the definition of IEM professional profile through a set of competences which need to be explored further. In addition, it may be a relevant tool for IEM curriculum analysis and a contribution for bridging the gap between universities and companies.

Using the GPU to design complex profile extrusion dies

In the present work the benefits of using graphics processing units (GPU) to aid the design of complex geometry profile extrusion dies, are studied. For that purpose, a3Dfinite volume based code that employs unstructured meshes to solve and couple the continuity, momentum and energy conservation equations governing the fluid flow, together with aconstitutive equation, was used. To evaluate the possibility of reducing the calculation time spent on the numerical calculations, the numerical code was parallelized in the GPU, using asimple programing approach without complex memory manipulations. For verificationpurposes, simulations were performed for three benchmark problems: Poiseuille flow, lid-driven cavity flow and flow around acylinder. Subsequently, the code was used on the design of two real life extrusion dies for the production of a medical catheter and a wood plastic composite decking profile. To evaluate the benefits, the results obtained with the GPU parallelized code were compared, in terms of speedup, with a serial implementation of the same code, that traditionally runs on the central processing unit (CPU). The results obtained show that, even with the simple parallelization approach employed, it was possible to obtain a significant reduction of the computation times.

Development of a new 3D OpenFOAM® solver to model the cooling stage in profile extrusion

[Excerpt] The advantages resulting from the use of numerical modelling tools to support the design of processing equipment are almost consensual. The design of calibration systems in profile extrusion is not an exception . H owever , the complex geome tries and heat exchange phenomena involved in this process require the use of numerical solvers able to model the heat exchange in more than one domain ( calibrator and polymer), the compatibilization of the heat transfer at the profile - calibrator interface and with the ability to deal with complex geometries. The combination of all these features is usually hard to find in commercial software. Moreover , the dimension of the meshes required to ob tain accurate results, result in computational times prohibitive for industrial application. (...)

Using OpenFOAM to aid the design of complex profile extrusion dies

[Extrat] Thermoplastic profiles are very attractive due to their inherent design freedom. However, the usual methodologies employed to design extrusion forming tools, based on experimental based trial–and–error procedures, are highly dependent on the designer’s experience and lead to high resources consumption. Despite of the relatively low cost of the raw materials employed on the production of this type of profiles, the resources involved in the die design process significantly increase their cost. These difficulties are even more evident when a complex geometry profile has to be produced and there is no previous experience with similar geometries. Therefore, novel design approaches are required, in order to reduce the required resources and guarantee a good performance for the produced profile. (...)

Changes in peripheral refractive profile after orthokeratology for different degrees of myopia

Purpose: The purpose of this study was to evaluate the effect of orthokeratology for different degrees of myopia correction in the relative location of tangential (FT) and sagittal (FS) power errors across the central 70 of the visual field in the horizontal meridian. Methods: Thirty-four right eyes of 34 patients with a mean age of 25.2 ± 6.4 years were fitted with Paragon CRT (Mesa, AZ) rigid gas permeable contact lenses to treat myopia (2.15 ± 1.26D, range: 0.88 to 5.25D). Axial and peripheral refraction were measured along the central 70 of the horizontal visual field with the Grand Seiko WAM5500 open-field auto-refractor. Spherical equivalent (M), as well as tangential (FT) and sagittal power errors (FS) were obtained. Analysis was stratified in three groups according to baseline spherical equivalent: Group 1 [MBaseline = 0.88 to 1.50D; n = 11], Group 2 [MBaseline = 1.51 to 2.49D; n = 11], and Group 3 [MBaseline = 2.50 to 5.25D; n = 12]. Results: Spherical equivalent was significantly more myopic after treatment beyond the central 40 of the visual field (p50.001). FT became significantly more myopic for all groups in the nasal and temporal retina with 25 (p 0.017), 30 (p 0.007) and 35 (p 0.004) of eye rotation. Myopic change in FS was less consistent, achieving only statistical significance for all groups at 35 in the nasal and temporal retina (p 0.045). Conclusions: Orthokeratology changes significantly FT in the myopic direction beyond the central 40 of the visual field for all degrees of myopia. Changes induced by orthokeratology in relative peripheral M, FT and FS with 35 of eye rotation were significantly correlated with axial myopia at baseline. Keywords: Field

Women’s perception of separation/divorce in Portugal: A sociodemographic profile

This article focuses on the personal experiences of Portuguese women regarding separation and divorce. The sample included 96 women, with at least 1 child, who responded to an inventory that addressed conflict, dysfunctional conjugality, emotional experiences, social support, and adaptation to divorce. Higher levels of conflict and marital dysfunction in litigious divorces were found, as well as more conflict when different lawyers were employed. Those women who were satisfied with alimony and visiting rights reported less conflict, fewer negative emotional experiences, and greater social support. Level of education and duration of separation influenced women’s perceptions. Implications for intervention are addressed.

Tocopherol profile of Brazil nut oil from different geographic areas of the Amazon region

The tocopherol content of Brazil nut oil from different Amazon regions (Manicoré-AM, Rio Preto da Eva-AM, São João da Baliza-RR, Caroebe-RR, Belém-PA, and Xapurí-AC) was investigated by normal-phase high-performance liquid chromatography. For all authentic oils, two isomers: α- and γ-tocopherols were observed (37.92-74.48 µg g-1, 106.88-171.80 µg g-1, respectively), and their levels were relatively constant among the oils having these geographic origins, which would enable to distinguish Brazil nut oil from other plant oils for authentication purposes. Commercial Brazil nut oils were also evaluated, and some of these oils demonstrated a tocopherol content that was very different from that of the authentic oils. Therefore, we suggest that the tocopherol profile of Brazil nut oil can be useful chemical marker for quality control and authentication.

Neurocognitive profile and cognitive intervention in Alzheimer's disease

Tese de Doutoramento em Psicologia (Especialidade de Psicologia Clínica)