Nanoemulsões catiônicas como sistemas de liberação de oligonucleotídeos : formulação e caracterização físico-química

Nanoemulsões catiônicas têm sido recentemente consideradas como potenciais sistemas de liberação de oligonucleotídeos. O objetivo do presente trabalho foi avaliar a influência da adição de quantidades crescentes dos lipídeos catiônicos estearilamina (EA), oleilamina (OA) ou DOTAP (DT) sobre propriedades físico-químicas de nanoemulsões como sistemas de liberação de um oligonucleotídeo modelo (pdT16). As formulações foram preparadas pelo procedimento de emulsificação espontânea. As nanoemulsões constituídas de triglicerídeos de cadeia média, lecitina de gema de ovo, glicerol, quantidades crescentes dos lipídeos catiônicos (até 20 mM) e água foram caracterizadas em termos de diâmetro médio, pH, potencial zeta e viscosidade. Baseado nos resultados obtidos, as formulações contendo EA, OA e DT na concentração de 2 mM foram selecionadas para a continuidade do trabalho, uma vez que apresentam diâmetro de gotícula e potencial zeta de cerca de 250 nm e 40-50 mV, respectivamente. A taxa de associação do pdT16 às nanoemulsões foi determinada, indiretamente, pelo doseamento deste, na fase aquosa externa após separação em membranas de ultrafiltração/centrifugação, por meio de espectrofotometria no UV. A maior taxa de associação do pdT16 foi detectada para a formulação contendo o lipídeo catiônico DT (até ~70 mg/g de fase interna). Evidências adicionais da associação do pdT16 com as nanoemulsões foram detectadas pelo aumento do diâmetro de gotícula, inversão do potencial zeta e morfologia das gotículas. Em uma última etapa, um estudo preliminar da liberação do pdT16 foi realizado especialmente para a formulação contendo o lipídeo catiônico DT. O fator de diluição e relação de cargas [+/-] foram identificados como os principais parâmetros que influenciam a liberação do pdT16 a partir das nanoemulsões. Em conclusão, o conjunto dos resultados obtidos demonstra a influência da concentração e da natureza do lipídeo catiônico empregado sobre as propriedades físico-químicas de nanoemulsões catiônicas como sistemas de liberação de oligonucleotídeos.

Estudo de Matérias-Primas do Rio Grande do Norte para Uso em Revestimento Poroso: Influência do teor de dolomita e temperatura de calcinação nas propriedades físico-mecânicas

The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)

Aplicação de termogravimetria acoplada à espectrometria de massas para caracterização de petróleo e determinação da curva de evolução de gás sulfídrico

With the new discoveries of oil and gas, the exploration of fields in various geological basins, imports of other oils and the development of alternative fuels, more and more research labs have evaluated and characterized new types of petroleum and derivatives. Therefore the investment in new techniques and equipment in the samples analysis to determine their physical and chemical properties, their composition, possible contaminants, especification of products, among others, have multiplied in last years, so development of techniques for rapid and efficient characterization is extremely important for a better economic recovery of oil. Based on this context, this work has two main objectives. The first one is to characterize the oil by thermogravimetry coupled with mass spectrometry (TG-MS), and correlate these results with from other types of characterizations data previously informed. The second is to use the technique to develop a methodology to obtain the curve of evaluation of hydrogen sulfide gas in oil. Thus, four samples were analyzed by TG-MS, and X-ray fluorescence spectrometry (XRF). TG results can be used to indicate the nature of oil, its tendency in coke formation, temperatures of distillation and cracking, and other features. It was observed in MS evaluations the behavior of oil main compounds with temperature, the points where the volatilized certain fractions and the evaluation gas analysis of sulfide hydrogen that is compared with the evaluation curve obtained by Petrobras with another methodology

Sistemas microemulsionados como carreador lipídico para fármacos insolúveis

Several pharmaceutical products have been developed in recent years aiming to enhance the treatment of diseases by increasing the effectiveness of drugs. Many of these new products are based on new drug delivery systems. Among these, microemulsions, which were first studied in 1943 by Hoar and Schulman, is of great interest. Microemulsion can be defined as a thermodynamically stable, isotropic, translucent and transparent system of two immiscible liquids stabilized by a surfactant film located in the oil / water interface. The aim os this work was the incorporation of Amphotericin B and Simvasatin to a microemulsion system and analyzes its physicochemical properties and their therapeutical activity when incorporated into this system. Some very promising results were achieved as the reduction of the toxicity and maintenance of the efficacy of the Amphotericin B incorpored into a microemulsion, which was demonstrated in the in vitro pharmacotoxicological study. As for the incorporation of Simvastatin in microemulsion, it was observed a significant improvement in the potential antiinflammatory and anti-infective properties when the system was use to treat infected wounds (simvastatin pleiotropic effects). Therefore, it can be concluded that the incorporation of these drugs into microemulsion system reveal the potential of microemulsions as a promising and novel dosage form, qualifying them for future trials in order to make them available in the pharmaceutical market

Elaboration of sausage using minced fish of Nile tilapia filleting waste

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização térmica (TG/DTG, DTA, DSC, DSC-fotovisual) de Hormônios bioidênticos (estriol estradiol)

Bioidentical hormones are defined as compounds that have exactly the same chemical and molecular structure as hormones that are produced in the human body. It is believed that the use of hormones may be safer and more effective than the non-bioidentical hormones, because binding to receptors in the organism would be similar to the endogenous hormone. Bioidentical estrogens have been used in menopausal women, as an alternative to traditional hormone replacement therapy. Thermal data of these hormones are scarce in literature. Thermal analysis comprises a group of techniques that allows evaluating the physical-chemistry properties of a drug, while the drug is subjected to a controlled temperature programming. The thermal techniques are used in pharmaceutical studies for characterization of drugs, purity determination, polymorphism identification, compatibility and evaluation of stability. This study aims to characterize the bioidentical hormones estradiol and estriol through thermal techniques TG/DTG, DTA, DSC, DSC-photovisual. By the TG curves analysis was possible to calculated kinetic parameters for the samples. The kinetic data showed that there is good correlation in the different models used. For both estradiol and estriol, was found zero order reaction, which enabled the construction of the vapor pressure curves. Data from DTA and DSC curves of melting point and purity are the same of literature, showed relation with DSC-photovisual results. The analysis DTA curves showed the fusion event had the best linearity for both hormones. In the evaluation of possible degradation products, the analysis of the infrared shows no degradation products in the solid state

Características físico-químicas e citológicas do líquido sinovial da bainha tendínea digital de eqüinos

Foram estudadas as características físico-químicas e citológicas do líquido sinovial da bainha tendínea digital de nove eqüinos hígidos. Verificou-se que o líquido é viscoso, amarelo claro, límpido, livre de partículas e que não coagula à temperatura ambiente. Sua concentração média de ácido hialurônico foi 60,20mg/dl, a taxa de glicose, similar à plasmática e sua concentração protéica não ultrapassou 1,74g/dl, com relação média albumina:globulina de 0,94. O número médio de células nucleadas foi de 313 células/µl, com predominância de grandes células mononucleares e linfócitos. Houve correlação significativa (r = - 0,649, P<0,01) entre o aumento da concentração de ácido hialurônico e a diminuição percentual de linfócitos. As mensurações das características pesquisadas no líquido sinovial da bainha tendínea digital de eqüinos são de execução simples e passíveis de implantação na rotina de atendimentos clínico-cirúrgicos.

Variação das características físico-químicas e microbiológicas das salmouras empregadas na salga de queijos tipo mussarela durante o período de sua utilização

Foram analisadas 40 amostras de salmouras empregadas na salga por submersão de queijos tipo mussarela, em uma indústria de laticínios do Estado de São Paulo, Brasil, com o objetivo de se conhecer a variação das características físico-químicas e microbiológicas durante o período de sua utilização. Os valores médios do pH, concentração de cloreto de sódio e de proteínas solúveis, desde o preparo da salmoura até o 21° dia de utilização, variaram de 7,21 a 5,76, 27,1 a 24,5 e de zero a 0,126 mg/ml, respectivamente. Por outro lado, os valores médios das contagens de microrganismos mesófilos e do número mais provável de coliformes totais e de origem fecal variaram de 5,8 x 10 UFC/ml a 6,9 x 10(4) UFC/ml, zero a 1,6 x 10(5)/100ml e zero a 1,1 x 10(5)/100ml, respectivamente. Além disso, os valores médios das contagens de bolores e leveduras e de Staphylococcus coagulase positiva, variaram de 0,4 x 10 UFC/ml a 2,0 x 10³ UFC/ml e de zero a 1,3 x 10 UFC/ml, respectivamente. Os resultados encontrados sugerem a existência de condições higiênicas inadequadas durante o preparo e utilização das salmouras, de modo a representar uma importante fonte de contaminação para os queijos. em decorrência deste fato, existe a possibilidade do comprometimento da qualidade dos queijos, de modo a representar risco potencial à população consumidora.

Características físico-químicas do grão de cultivares de arroz em função da adubação nitrogenada

Rice (Oryza sativa L.) stands out as a staple food of the world population due to important nutritional properties. However, rice physico-chemical parameters vary according to genotype and management, for example, the use of nitrogen fertilizer. The aim of this work was to evaluate physico-chemical parameters of grains from thirteen cultivars of upland rice under supplemental sprinkler irrigation and fertilized with different nitrogen rates by topdressing (0, 40, 80, 120 and 160 kg ha(-1)). Parameters such as milling efficiency, commercial grade, gelatinization temperature, as well as total nitrogen and crude protein contents of grains were evaluated. Nitrogen fertilization positively influences the whole grain yield, especially IAC 25 and BRS Colosso. BRS Aroma, IAC 202, IAC 500, BEST 2000, Curinga and Baldo have a high percentage of broken grains. The cultivars Baldo and Carnaroli (appropriate for Italian cuisine), IAC 25 and Caiapo are classified as long grain and the others, as long-thin. The cultivars, except CIRAD 141, displayed grain gelatinization temperature between intermediate and low, providing quick cooking. The grain content protein varies among cultivars, and it can be increased with nitrogen fertilization.

Características físico-químicas e sensoriais da carne de cordeiros terminados com dietas contendo cana-de-açúcar ou silagem de milho e dois níveis de concentrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Purificação da glicerina bruta obtida a partir da transesterificação do óleo de algodão

The crude glycerine is a raw material that can be used in a wide variety of products. Even with all the impurities inherent in the process of being obtained, the crude glycerin is already in a marketable product. However, the market is much more favorable to the commercialization of purified glycerine. The glycerin is a byproduct gotten from the process of transesterification of waste oils and fats in the production of biodiesel. More recently, the deployment of the new Federal Law of Brazil, related to the implementation of energy resources, forces, from 2008, the increase of 2% biodiesel in diesel common with prospects for 5% (B5). Therefore, it is indispensable that new routes of purification as well as new markets are developed. The objective of this work was to purify, through ion exchange, the crude glycerin, obtained from the reaction of transesterification of cottonseed oil. The cottonseed oil was characterized as the fatty acid composition and physical-chemical properties. The process of ion exchange was conducted in batch. In this process were used strong cation, low anion resins and a mixed resin used to de-ionize water. The purified glycerin was characterized as the content of metals. Tests were performed with activated charcoal adsorption, and for this, it was made tests of time contact with coal as well as quantity of coal used. The time of activation, the amount of the activation solution, the contact time of the glycerol solution in resins, the amount and type of resin applied were evaluated. Considering the analysis made with activated charcoal, when the glycerin solution was treated using the resins individually it was observed that in the conditions for treatment with 10 g of resin, 5 hours of contact with each resin and 50 mL of glycerin solution, its conductivity decreased to a cationic resin, increased to the anionic resin and had a variable value with respect to resin mixed. In the treatment in series, there was a constant decrease in the conductivity of the solution of glycerin. Considering two types of treatment, in series and individually, the content of glycerol in glycerin pre-purified solution with the different resins varied from 12,46 to 29.51% (diluted solution). In analysis performed without the use of activated charcoal, the behavior of the conductivity of the solution of glycerin were similar to results for treatment with activated charcoal, both in series as individually. The solution of glycerin pre-purified had a glycerol content varying from 8.3 to 25.7% (diluted solution). In relation to pH, it had a behavior in accordance with the expected: acid for the glycerin solution treated with cationic resin, basic when the glycerin solution was treated with the anionic resin and neutral when treated with the mixed resin, independent of the kind of procedure used (with or without coal, resins individually or in series). In relation to the color of the glycerin pre-purified solution, the resin that showed the best result was the anionic (colorless), however this does not mean that the solution is more in pure glycerol. The chromatographic analysis of the solutions obtained after the passage through the resins indicated that the treatment was effective by the presence of only one component (glycerol), not considering the solvent of the analysis

Novas formulações de fluidos de corte: otimização, propriedades e recuperação do óleo usado

Cutting fluids are lubricants used in metal-mechanical industries. Their complex composition varies according to the type of operation carried out, also depending on the metals under treatment or investigation. Due to the high amount of mineral oil produced in Northeastern Brazil, we have detected the need to better use this class of material. In this work, two novel formulations have been tested, both based on naphthenic mineral oil and additives, such as: an emulsifying agent (A), an anticorrosion agent (B), a biocide (C) and an antifoam agent (D). Each formulation was prepared by mixing the additives in the mineral oil at a 700-rpm stirring velocity for 10 min, at 25°C, employing a 24 factorial planning. The formulations were characterized by means of density, total acid number (TAN), viscosity, flash point and anticorrosion activity. In a subsequent study, oil-in-water emulsions were prepared from these novel formulations. The emulsions were analyzed in terms of stability, corrosion degree, percentage of foam formation, conductivity, accelerated stability and particle size. The samples were appropriately labeled, and, in special, two of them were selected for featuring emulsion properties which were closer to those of the standards chosen as references (commercial cutting oils). Investigations were undertaken on the ability of NaCl and CaCl2 to destabilize the emulsions, at concentrations of 2%, 5% and 10%, at an 800-rpm stirring velocity for 5 min and temperatures of 25º, 40º, 50º and 60ºC. The recovered oils were chemically altered by reincorporating the same additives used in the original formulations, followed by preparation of emulsions with the same concentrations as those of the initial ones. The purpose was to assess the possibility of reusing the recovered oil. The effluents generated during the emulsion destabilization step were characterized via turbidity index, contents of oil and grease, pH, and contents of anions and cations, observing compliance with the parameters established by the current environmental legislation (Brazil s CONAMA 357/05 resolution). It could be concluded that the formulations presented excellent physicochemical properties as compared to commercial cutting fluids, showing that the quality of the newly-prepared fluids is superior to that of the formulations available in the market, enabling technically and environmentally-safe applications

Alterações físico-químicas dos óleos de girassol, milho e soja em frituras

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Degradação de pastagens na Região Amazônica: propriedades físicas do solo e crescimento de raízes

O objetivo deste trabalho foi avaliar: (i) a relação entre a degradação de pastagens de colonião manejadas com queima, e as modificações nas propriedades físicas e morfológicas de um Argissolo Vermelho-Amarelo da Amazônia; (ii) o crescimento radicular de pastagens com diferentes níveis de degradação; (iii) o potencial de recuperação de pastagens degradadas de colonião com a introdução de andropógon. Numa propriedade rural da Região de Marabá, PA, foram estudados quatro tipos de pastagem: pastagem produtiva de colonião (Panicum maximum Jacq.); pastagem de colonião em declínio produtivo; pastagem de colonião degradada (capoeira); pastagem de colonião degradada e recuperada com andropógon (Andropogon gayanus Kunth). Como referência das propriedades do solo antes do desmatamento, estudou-se, também, uma reserva de mata nativa. A queima das pastagens foi prática usual, e apesar disso, estas não foram adubadas. A degradação da pastagem diminuiu a cobertura do solo e o deixou exposto à chuva e ao pisoteio do gado, o que resultou em aumento da densidade do solo na camada superficial e diminuição do grau de floculação da argila e da porosidade total. A diminuição da produção da parte aérea na pastagem degradada foi acompanhada de diminuição do número de raízes no perfil do solo, e da concentração do sistema radicular próximo à superfície. O andropógon demonstrou bom potencial para recuperação das áreas de pastagens degradadas, na Região Amazônica.