Proposta de modelo de processo de produção de conteúdo em emissora de TV digital universitária

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Mapeamento de ontologias empresariais para modelos de processos de negócio em BPMN, com aplicação em processos de software

Pós-graduação em Ciência da Computação - IBILCE

Processos de auto-regulação no curso de vida: controle primário e controle secundário

Este artigo discute conceitos relevantes à perspectiva do curso de vida, porém pouco difundidos no Brasil: controle primário e controle secundário. O primeiro se refere aos esforços que o indivíduo empreende para adaptar o ambiente às suas necessidades; o segundo, para se adaptar ao ambiente. Apresenta-se a formulação original dos conceitos como modelo de dois processos de controle, em oposição a modelos de processo único, como o do desamparo aprendido. Em seguida, discute-se revisão conceitual que trouxe modificação e ampliação para estes construtos, concebendo-os em um modelo bidimensional que articula controle primário e secundário com os conceitos de seleção e compensação. Nesse processo, apresentam-se contribuições no intuito de estimular a reflexão e expandir a discussão teórico-conceitual que envolve estes construtos.

Effects of irrigation on water use and water use efficiency in two fast growing Eucalyptus plantations

Eucalyptus plantations occupy almost 20 million ha worldwide and exceed 3.7 million ha in Brazil alone. Improved genetics and silviculture have led to as much as a three-fold increase in productivity in Eucalyptus plantations in Brazil and the large land area occupied by these highly productive ecosystems raises concern over their effect on local water supplies. As part of the Brazil Potential Productivity Project, we measured water use of Eucalyptus grandis x urophylla clones in rainfed and irrigated stands in two plantations differing in productivity. The Aracruz (lower productivity) site is located in the state of Espirito Santo and the Veracel (higher productivity) site in Bahia state. At each plantation, we measured stand water use using homemade sap flow sensors and a calibration curve using the clones and probes we utilized in the study. We also quantified changes in growth, leaf area and water use efficiency (the amount of wood produced per unit of water transpired). Measurements were conducted for 1 year during 2005 at Aracruz and from August through December 2005 at Veracel. Transpiration at both sites was high compared to other studies but annual estimates at Aracruz for the rainfed treatment compared well with a process model calibrated for the Aracruz site (within 10%). Annual water use at Aracruz was 1394 mm in rainfed treatments versus 1779 mm in irrigated treatments and accounted for approximately 67% and 58% of annual precipitation and irrigation inputs respectively. Increased water use in the irrigated stands at Aracruz was associated with higher sapwood area, leaf area index and transpiration per unit leaf area but there was no difference in the response of canopy conductance with air saturation deficit between treatments. Water use efficiency at the Aracruz site was also not influenced by irrigation and was similar to the rainfed treatment. During the period of overlapping measurements, the response to irrigation treatments at the more productive Veracel site was similar to Aracruz. Stand water use at the Veracel site totaled 975 mm and 1102 mm in rainfed and irrigated treatments during the 5-month measurement period respectively. Irrigated stands at Veracel also had higher leaf area with no difference in the response of canopy conductance with air saturation deficit between treatments. Water use efficiency was also unaffected by irrigation at Veracel. Results from this and other studies suggest that improved resource availability does not negatively impact water use efficiency but increased productivity of these plantations is associated with higher water use and should be given consideration during plantation management decision making processes aimed at increasing productivity. Published by Elsevier B.V.

Effect of the Canary Islands in the blockage and mixing of the North Atlantic eastern water masses

[EN] We apply an inverse model to a hydrographic cruise that completely closes the Canary Islands to investigate their effect on the water masses transports. Most central waters are transported south between the eastern islands and the African coast, with 2.5 Sv out of a total of 3.5 Sv. Intermediate waters are effectively blocked by the islands passages, with Mediterranean/Antarctic waters predominantly found north/south of the islands, and most deep waters loop around the archipelago plateau. A process model upholds the existence of intense two-way exchange between central and intermediate waters along the eastern passage, with vertical velocities of order 10 m s.

Asset management of wastewater networks

Asset Management (AM) is a set of procedures operable at the strategic-tacticaloperational level, for the management of the physical asset’s performance, associated risks and costs within its whole life-cycle. AM combines the engineering, managerial and informatics points of view. In addition to internal drivers, AM is driven by the demands of customers (social pull) and regulators (environmental mandates and economic considerations). AM can follow either a top-down or a bottom-up approach. Considering rehabilitation planning at the bottom-up level, the main issue would be to rehabilitate the right pipe at the right time with the right technique. Finding the right pipe may be possible and practicable, but determining the timeliness of the rehabilitation and the choice of the techniques adopted to rehabilitate is a bit abstruse. It is a truism that rehabilitating an asset too early is unwise, just as doing it late may have entailed extra expenses en route, in addition to the cost of the exercise of rehabilitation per se. One is confronted with a typical ‘Hamlet-isque dilemma’ – ‘to repair or not to repair’; or put in another way, ‘to replace or not to replace’. The decision in this case is governed by three factors, not necessarily interrelated – quality of customer service, costs and budget in the life cycle of the asset in question. The goal of replacement planning is to find the juncture in the asset’s life cycle where the cost of replacement is balanced by the rising maintenance costs and the declining level of service. System maintenance aims at improving performance and maintaining the asset in good working condition for as long as possible. Effective planning is used to target maintenance activities to meet these goals and minimize costly exigencies. The main objective of this dissertation is to develop a process-model for asset replacement planning. The aim of the model is to determine the optimal pipe replacement year by comparing, temporally, the annual operating and maintenance costs of the existing asset and the annuity of the investment in a new equivalent pipe, at the best market price. It is proposed that risk cost provide an appropriate framework to decide the balance between investment for replacing or operational expenditures for maintaining an asset. The model describes a practical approach to estimate when an asset should be replaced. A comprehensive list of criteria to be considered is outlined, the main criteria being a visà- vis between maintenance and replacement expenditures. The costs to maintain the assets should be described by a cost function related to the asset type, the risks to the safety of people and property owing to declining condition of asset, and the predicted frequency of failures. The cost functions reflect the condition of the existing asset at the time the decision to maintain or replace is taken: age, level of deterioration, risk of failure. The process model is applied in the wastewater network of Oslo, the capital city of Norway, and uses available real-world information to forecast life-cycle costs of maintenance and rehabilitation strategies and support infrastructure management decisions. The case study provides an insight into the various definitions of ‘asset lifetime’ – service life, economic life and physical life. The results recommend that one common value for lifetime should not be applied to the all the pipelines in the stock for investment planning in the long-term period; rather it would be wiser to define different values for different cohorts of pipelines to reduce the uncertainties associated with generalisations for simplification. It is envisaged that more criteria the municipality is able to include, to estimate maintenance costs for the existing assets, the more precise will the estimation of the expected service life be. The ability to include social costs enables to compute the asset life, not only based on its physical characterisation, but also on the sensitivity of network areas to social impact of failures. The type of economic analysis is very sensitive to model parameters that are difficult to determine accurately. The main value of this approach is the effort to demonstrate that it is possible to include, in decision-making, factors as the cost of the risk associated with a decline in level of performance, the level of this deterioration and the asset’s depreciation rate, without looking at age as the sole criterion for making decisions regarding replacements.

Creazione e sviluppo di un sistema di controllo in tempo reale per un sistema fuel cell

The control of a proton exchange membrane fuel cell system (PEM FC) for domestic heat and power supply requires extensive control measures to handle the complicated process. Highly dynamic and non linear behavior, increase drastically the difficulties to find the optimal design and control strategies. The objective is to design, implement and commission a controller for the entire fuel cell system. The fuel cell process and the control system are engineered simultaneously; therefore there is no access to the process hardware during the control system development. Therefore the method of choice was a model based design approach, following the rapid control prototyping (RCP) methodology. The fuel cell system is simulated using a fuel cell library which allowed thermodynamic calculations. In the course of the development the process model is continuously adapted to the real system. The controller application is designed and developed in parallel and thereby tested and verified against the process model. Furthermore, after the commissioning of the real system, the process model can be also better identified and parameterized utilizing measurement data to perform optimization procedures. The process model and the controller application are implemented in Simulink using Mathworks` Real Time Workshop (RTW) and the xPC development suite for MiL (model-in-theloop) and HiL (hardware-in-the-loop) testing. It is possible to completely develop, verify and validate the controller application without depending on the real fuel cell system, which is not available for testing during the development process. The fuel cell system can be immediately taken into operation after connecting the controller to the process.

Satisfaction with follow-up consultations among younger adults treated for cancer: the role of quality of life and psychological variables

Given increased survival rates and treatment-related late effects, follow-up for cancer survivors is increasingly recommended. However, information about adverse events (e.g. possibility of late effects) may be distressing for the cancer survivor and lead to poor clinic attendance. Survivor satisfaction with appointments and the information provided are important. The Monitoring Process Model provides a theoretical framework to understand how survivors cope with threatening information, and consequences for follow-up care. Our aims were to describe satisfaction with routine follow-up and association between monitoring/blunting and satisfaction with care.

Beitrag zur Prozessstandardisierung in der Intralogistik

Ein dynamisches Umfeld erforderte die permanente Anpassung (intra-)logistischer Prozesse zur Aufrechterhaltung der Leistungs- und Wettbewerbsfähigkeit von Unternehmen. In der Standardisierung von Prozessen und in unternehmensübergreifenden Prozessmodellen wurden Schlüsselfaktoren für ein effizientes Geschäftsprozessmanagement gesehen, insbesondere in Netzwerken. In der Praxis fehlten wissenschaftlich fundierte und detaillierte Referenzprozessmodelle für die (Intra-)Logistik. Mit der Erforschung und Entwicklung eines Referenzprozessmodells und der prototypischen Realisierung einer Prozess-Workbench zur generischen Erstellung wandelbarer Prozessketten wurde ein Beitrag zur Prozessstandardisierung in der Logistik geleistet. Im Folgenden wird der beschrittene Lösungsweg dargestellt, der erstens aus der Entwicklung eines Metamodells für die Referenzmodellierung, zweitens aus dem empirischen Nachweis der Generierung eines Referenzprozessmodells aus „atomaren“ Elementen und drittens aus der Modellevaluation bestand.

Sportvereine als Interessenorganisationen?! – Ursachen und Auswirkungen von Ziel-Interessen-Divergenzen in freiwilligen Sportorganisationen

Für Sportvereine als Interessenorganisationen scheint die Rückbindung der Vereinsziele an die Mitgliederinteressen von zentraler Bedeutung zu sein. In der Vereinsrealität dürfte aber diese Rückbindung nur teilweise gewährleistet sein und folglich Ziel-Interessen-Divergenzen eher die Norm als die Ausnahme darstellen. Vor diesem Hintergrund stellt sich die Frage, welche Ursachen für Ziel-Interessen-Divergenzen verantwortlich zu machen sind und welche Auswirkungen sich daraus für die Vereine ergeben. Dieser Frage geht der vorliegende Beitrag nach, indem auf der Grundlage des Akteurtheoretischen Mehr-Ebenen-Modells zur Analyse der Entwicklung von Sportvereinen die struktur- und handlungsbedingten Ursachen und Auswirkungen von Divergenzen auf der Vereins- und Mitgliederebene beleuchtet werden. Mit Blick auf die Ursachen wurde der Einfluss der korporativen Vereinsstrukturen und der individuellen Handlungsorientierungen der Mitglieder auf Divergenzen untersucht. Die Befunde hierzu zeigen, dass Divergenzen einerseits durch einem zunehmenden Differenzierungs- und Hierarchisierungsgrad (z.B. Vereinsgröße, Umweltvernetzung, Oligarchisierung) begünstigt werden und andererseits vor allem bei einer primären Verfolgung von Eigeninteressen der Mitglieder auftreten. Hinsichtlich der Auswirkungen wurden die individuellen Mitgliederreaktionen und die korporativen Vereinsreaktionen auf Divergenzen analysiert. Diesbezüglich zeigen die Befunde, dass sowohl die Mitglieder als auch die Vereinsführung überwiegend konstruktiv auf Divergenzen reagieren (z.B. durch Problemansprache, Vertrauen, Kompromissfindung), so dass es vielen Vereinen offenbar relativ gut gelingt, Ziel-Interessen-Divergenzen bis zu einem gewissen Grad sowohl aushalten als auch aufarbeiten zu können.

Transient simulations of the carbon and nitrogen dynamics in northern peatlands: from the Last Glacial Maximum to the 21st century

The development of northern high-latitude peatlands played an important role in the carbon (C) balance of the land biosphere since the Last Glacial Maximum (LGM). At present, carbon storage in northern peatlands is substantial and estimated to be 500 ± 100 Pg C (1 Pg C = 1015 g C). Here, we develop and apply a peatland module embedded in a dynamic global vegetation and land surface process model (LPX-Bern 1.0). The peatland module features a dynamic nitrogen cycle, a dynamic C transfer between peatland acrotelm (upper oxic layer) and catotelm (deep anoxic layer), hydrology- and temperature-dependent respiration rates, and peatland specific plant functional types. Nitrogen limitation down-regulates average modern net primary productivity over peatlands by about half. Decadal acrotelm-to-catotelm C fluxes vary between −20 and +50 g C m−2 yr−1 over the Holocene. Key model parameters are calibrated with reconstructed peat accumulation rates from peat-core data. The model reproduces the major features of the peat core data and of the observation-based modern circumpolar soil carbon distribution. Results from a set of simulations for possible evolutions of northern peat development and areal extent show that soil C stocks in modern peatlands increased by 365–550 Pg C since the LGM, of which 175–272 Pg C accumulated between 11 and 5 kyr BP. Furthermore, our simulations suggest a persistent C sequestration rate of 35–50 Pg C per 1000 yr in present-day peatlands under current climate conditions, and that this C sink could either sustain or turn towards a source by 2100 AD depending on climate trajectories as projected for different representative greenhouse gas concentration pathways.

Isotopic constraints on marine and terrestrial N2O emissions during the last deglaciation

Nitrous oxide (N2O) is an important greenhouse gas and ozone-depleting substance that has anthropogenic as well as natural marine and terrestrial sources. The tropospheric N2O concentrations have varied substantially in the past in concert with changing climate on glacial–interglacial and millennial timescales. It is not well understood, however, how N2O emissions from marine and terrestrial sources change in response to varying environmental conditions. The distinct isotopic compositions of marine and terrestrial N2O sources can help disentangle the relative changes in marine and terrestrial N2O emissions during past climate variations. Here we present N2O concentration and isotopic data for the last deglaciation, from 16,000 to 10,000 years before present, retrieved from air bubbles trapped in polar ice at Taylor Glacier, Antarctica. With the help of our data and a box model of the N2O cycle, we find a 30 per cent increase in total N2O emissions from the late glacial to the interglacial, with terrestrial and marine emissions contributing equally to the overall increase and generally evolving in parallel over the last deglaciation, even though there is no a priori connection between the drivers of the two sources. However, we find that terrestrial emissions dominated on centennial timescales, consistent with a state-of-the-art dynamic global vegetation and land surface process model that suggests that during the last deglaciation emission changes were strongly influenced by temperature and precipitation patterns over land surfaces. The results improve our understanding of the drivers of natural N2O emissions and are consistent with the idea that natural N2O emissions will probably increase in response to anthropogenic warming.

Appraisal-driven somatovisceral response patterning: effects of intrinsic pleasantness and goal conduciveness.

Several componential emotion theories suggest that appraisal outcomes trigger characteristic somatovisceral changes that facilitate information processing and prepare the organism for adaptive behavior. The current study tested predictions derived from Scherer's Component Process Model. Participants viewed unpleasant and pleasant pictures (intrinsic pleasantness appraisal) and were asked to concurrently perform either an arm extension or an arm flexion, leading to an increase or a decrease in picture size. Increasing pleasant stimuli and decreasing unpleasant stimuli were considered goal conducive; decreasing pleasant stimuli and increasing unpleasant stimuli were considered goal obstructive (goal conduciveness appraisal). Both appraisals were marked by several somatovisceral changes (facial electromyogram, heart rate (HR)). As predicted, the changes induced by the two appraisals showed similar patterns. Furthermore, HR results, compared with data of earlier studies, suggest that the adaptive consequences of both appraisals may be mediated by stimulus proximity.

First evidence for differential and sequential efferent effects of stimulus relevance and goal conduciveness appraisal.

In the context of a memory task, participants were presented with pictures displaying biological and cultural threat stimuli or neutral stimuli (stimulus relevance manipulation) with superimposed symbols signaling monetary gains or losses (goal conduciveness manipulation). Results for heart rate and facial electromyogram show differential efferent effects of the respective appraisal outcomes and provide first evidence for sequential processing, as postulated by Scherer's component process model of emotion. Specifically, as predicted, muscle activity over the brow and cheek regions marking the process of relevance appraisal occurred significantly earlier than facial muscle activity markers of goal conduciveness appraisal. Heart rate, in contrast, was influenced by the stimulus relevance manipulation only.

The Relationship Among Resilience, Forgiveness, and Anger Expression in Adolescents

This study was designed to investigate and describe the relationship among resilience, forgiveness and anger expression in adolescents. The purpose of the study was to explore whether certain adolescent resiliencies significantly related to positive or negative affective, behavioral, or cognitive levels of forgiveness and certain types of anger expression in adolescents. This study also investigated whether there were certain adolescent resiliencies and types of forgiveness that can predict lower levels of negative anger expression in adolescents. This research was built on two conceptual models: Wolin and Wolin's (1993) Challenge Model and the Forgiveness Process Model (Enright & Human Development Study Group, 1991). It was based on a quantitative, single-subject correlational research design. A multiple regression analysis was also used to explore possible effects of resilience and forgiveness on anger expression in adolescents. In addition, two demographic variables, Age and Gender, were examined for possible effects on anger expression. Data were gathered from a convenience sample sample of 70 students in three Maine public high schools using three separate assessment instruments: the Adolescent Resiliency Attitudes Scale (ARAS), the Adolescent Version of the Enright Forgiveness Inventory (EFI), and the Adolescent Anger Rating Scale (AARS). Correlational analyses were done on the scales and subscales of these surveys. Significant relationships were found between several adolescent resiliencies and forms of forgiveness as well as between some adolescent resiliencies and types of anger expression. The data indicated that Total Resiliency significantly correlated with Total Forgiveness as well as Total Anger. The findings also identified particular adolescent resiliencies that significantly predicted types of anger expression, while forgiveness did not predict types of anger expression. The data revealed that Age and Gender had no significant affect on anger expression. These findings suggest that the constructs of adolescent resilience and forgiveness have commonalities that can influence how adolescents express anger, and further suggest that intervention and prevention programs expand their focus to incorporate forgiveness skills. The findings from this study can provide critical information to counselors, therapists, and other helping professionals working with adolescents, on approaches to designing and implementing therapy modalities or developmental school guidance programs for adolescents.