Screen printed barium titanate thick films prepared from mechanically activated powders

Barium titanate thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C for 1 hour. The thickness was 30-75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.

Redescription and reevaluation of the generic status of Leptodactylus dantasi (Amphibia, Anura, Leptodactylidae) and description of its unusual advertisement call

Leptodactylus dantasi Bokermann is redescribed from adult specimens collected in Parque Nacional da Serra do Divisor, State of Acre, Brazil, near the border between the Brazilian state of Acre and Peru. We propose the inclusion of this species in the genus Hydrolaetare. A new diagnostic character observed for the genus is the presence of fringes of fingers, and fringes and webbing of toes, finely serrate; the serrate edge of the fringe and webbing can be keratinized in males, females, and subadults. Hydrolaetare dantasi (Bokermann) is characterized by robust body and limbs, a broad and depressed head, slightly shorter than wide, and long, pointed and basally webbed toes. Hydrolaetare dantasi differs from the only other species in this genus, Hydrolaetare schmidti (Cochran and Goin), mainly by having toes webbed basally (fully webbed in H. schmidti). The advertisement call of H. dantasi is composed of two components; an initial note produced by the impact of the vocal sac against the ground and a second note corresponding to a long whistle of ascending frequency. The initial note is a percussive sound and represents an unusual form of sound emission in anurans; the second note is a vocalization.

Screen-printed carbon electrode modified with poly-L-histidine applied to voltammetric determination of chromium (VI)

The present work reports the use of a screen-printed carbon electrode (SPCE) modified by poly-L-histidine film to determine chromium (VI). Stable films can be formed by direct addition of PH solution 1 % (w/v) on the electrode surface, followed by heating at 80°C during 5 min. Calibration curves can be constructed for Cr(VI) from 1.0 × 10-5 mol L-1 to 7.0 × 10-5 mol L-1 Cr (VI) in acetate buffer pH 4 using a preconcentration step of 60s at open circuit potential. A relative standard deviation of 3.2% was for five determination of 4.0 × 10 -5 mol L-1 Cr (VI). The method was successful applied to determination of Cr(VI) in wastewater samples from a leather dyeing industry. copyright The Electrochemical Society.

New label free CA125 detection based on gold nanostructured screen-printed electrode

This paper describes the optimisation and the analytical performances of a label-free impedimetric immunosensor for the detection of tumour marker CA125 based on gold nanoparticles modified screen-printed graphite electrode. Experimental conditions of each step for the developed immunosensor were studied and optimised. The immunosensor response varied linearly (r2 = 0.996) with antigen concentration between 0 and 100 U/mL. The estimated detection limit was 6.7 U/mL. The electrochemical immunosensor allowed unambiguous identification of CA125, while no significant non-specific signal was detected in the case of all negative controls. The analytical usefulness of the impedimetric immunosensor was finally demonstrated analysing serum samples. © 2012 Elsevier B.V. All rights reserved.

The advertisement call of dendropsophus tritaeniatus (Bokermann, 1965) (Anura: Hylidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caribbean enterprise for the production and distribution of printed and audio-visual materials: a pre-feasibility study

Includes bibliography

Nanostructured screen-printed electrodes modified with self-assembled monolayers for determination of metronidazole in different matrices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Natural History of Paratelmatobius gaigeae (Amphibia, Anura, Leptodactylidae): Description of the Tadpole and Advertisement Call

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development and application of a screen-printed electrode modified with MWCNT for the electrocatalytic detection of thiram

Interest in the electronic properties of carbon nanotubes has increased in recent years. These materials can be used in the development of electrochemical sensors for the measurement and monitoring of analytes of environmental interest, such as pharmaceuticals, dyes, and pesticides. This work describes the use of homemade screen-printed electrodes modified with multi-walled carbon nanotubes (MWCNT) for the electrochemical detection of the fungicide thiram. The electrochemical characteristics of the proposed system were evaluated using cyclic voltammetry, with investigation of the electrochemical behavior of the sensor in the presence of the analyte, and estimation of electrochemical parameters including the diffusion coefficient, electron transfer coefficient (α), and number of electrons transferred in the catalytic electro-oxidation. The sensor response was optimized using amperometry. The best sensor performance was obtained in 0.1 mol L-1 phosphate buffer solution at pH 8.0, where a detection limit of 7.9 x 10-6 mol L-1 was achieved. Finally, in order to improve the sensitivity of the sensor, square wave voltammetry (SWV) was used for thiram quantification, instead of amperometry. Using SWV, a response range for thiram from 9.9 x 10-6 to 9.1 x 10-5 mol L-1 was obtained, with a sensitivity of 30948 µA mol L-1, and limits of detection and quantification of 1.6 x 10-6 and 5.4 x 10-6 mol L-1, respectively. The applicability of this efficient new alternative methodology for thiram detection was demonstrated using analyses of enriched soil samples.

Morphological variation, advertisement call, and tadpoles of Bokermannohyla nanuzae (Bokermann, 1973), and taxonomic status of B-feioi (Napoli &Caramaschi, 2004) (Anura, Hylidae, Cophomantini)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Advertisement call, colour variation, natural history, and geographic distribution of Proceratophrys caramaschii (Anura: Odontophrynidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)