Analysis of the impact of charging of PHEV and EV in Spain

This paper studies the effect of different penetration rates of plug-in hybrid electric vehicles (PHEVs) and electric vehicles (EV) in the Spanish electrical system. A stochastic model for the average trip evaluation and for the arriving and departure times is used to determine the availability of the vehicles for charging. A novel advanced charging algorithm is proposed, which avoids any communication among all agents. Its performance is determined through different charging scenarios.

Does the natural "microcosm" created by Tuber aestivum affect soil microarthropods? A new hypothesis based on Collembola in truffle culture

microarthropods play an important role in fungi dispersion, but little is still known about the interaction between truffle and soil microarthropods. The aim of this study was to investigate the ability of the truffle Tuber aestivum to modify soil biogeochemistry (i.e. create a zone of scarce vegetation around the host plant, called a burn or brûlé) and to highlight the effects of the brûlé on the soil fauna community. We compared soil microarthropod communities found in the soil inside versus outside the T. aestivum brûlé with the chemistry of soil collected inside versus outside the brûlé. The study was carried out in three Mediterranean areas, two in Italy and one in Spain. The results confirmed the ability of T. aestivum to modify soil biogeochemistry in the brûlé: pH was higher and total organic carbon tended to be lower inside the brûlé compared to outside. Soil fauna communities showed some interesting differences. Some groups, such as Symphyla and Pauropoda, adapted well to the soil; some Collembolan families, and biodiversity and soil quality indices were generally higher outside the brûlé. Folsomia sp. showed higher abundance in the soil of the brûlé compared to outside. The results suggest that some Collembola groups may be attracted by the fungal metabolites produced by T. aestivum, while other Collembola and other microarthropods may find an unfavourable environment in the soil of the brûlé. The next steps will be to confirm this hypothesis and to extend the study to other keys groups such as nematodes and earthworms and to link fluctuations of soil communities with the biological phases of truffle growth.

Acústica de las iglesias jesuíticas como parte del patrimonio integral en Córdoba y San Ignacio Miní

En esta investigación se aborda el tema del comportamiento acústico de las Iglesias Jesuíticas de la ciudad de Córdoba (Argentina) y San Ignacio Mini ubicada en la localidad de San Ignacio, provincia de Misiones (Argentina), construidas hace dos siglos atrás y declaradas Patrimonio de la Humanidad, con el objetivo de evaluar los parámetros que determinan la comprensión de la palabra y la aptitud de cada una de las iglesias para el canto y la música religiosa. En una primera etapa la investigación se orientó a profundizar en las características constructivas interiores de cada templo y a proponer una metodología de análisis para comparar los resultados de las mediciones objetivas, realizadas mediante la implementación de mediciones in situ, con los resultados de las apreciaciones subjetivas resultantes de la elaboración de encuestas, a los fines de caracterizar acústicamente cada espacio sonoro. Se seleccionaron, para la caracterización objetiva de cada templo, aquellos parámetros que permiten sintetizar las propiedades acústicas relacionadas con la música y la palabra, y aquellos que posibilitan medir la proporción efectiva de las primeras reflexiones, consideradas como índices subjetivos de la capacidad de distinción del sonido por parte del oyente. Se comparan los valores alcanzados con las preferencias subjetivas obtenidas en las encuestas de opinión. Se relevaron tiempos de reverberación altos en todas iglesias, fuera de los considerados óptimos para cada recinto. Se analizaron los índices de calidad y se comprobó cómo influyen los diferentes materiales en el comportamiento acústico de cada recinto. Para la evaluación subjetiva se implementó una encuesta ya validada en la que se privilegió la fácil asociación entre parámetros acústicos y psicoacústicos, esto posibilitó encontrar aquellos parámetros objetivos, simulados con público, que estuviesen fuertemente relacionados con el juicio subjetivo, así como aquellos con menor correlación. La búsqueda y relevamiento de material grafico, fotográfico y otros documentos históricos posibilitó la reconstrucción de cada iglesia para su modelización y la evaluación del comportamiento de todos los templos con la presencia de feligreses, no habiéndose podido realizar mediciones bajo esta condición. El interés por obtener datos acústicos más precisos de la Iglesia San Ignacio Mini, que actualmente se encuentra en ruinas, llevó a utilizar herramientas más poderosas de cálculo como el método de las fuentes de imagen “Ray Tracing Impact” por medio del cual se logró la auralización. Para ello se trabajó con un archivo de audio que representó la voz masculina de un sacerdote en el idioma jesuítico-guaraní, recuperando así el patrimonio cultural intangible. ABSTRACT This research addresses the acoustic behavior of the Jesuit Churches in Cordoba City (Argentina) and San Ignacio Mini (located in the town of San Ignacio, Misiones, Argentina), built two centuries ago and declared World Heritage Sites, with the objective to evaluate the parameters that determine the speech comprehension and the ability of each of the churches for singing of religious music. The first step of the work was aimed to further investigate the internal structural characteristics of each temple and to propose an analysis methodology to compare the objective results of in situ measurements with the subjective results of surveys, in order to characterize acoustically each sound-space. For the subjective characterization of each temple, those parameters that allow synthesizing the acoustic properties related to music & speech and measuring the subjective indices for the recognition of sounds, were selected. Also, the values were compared with the ones obtained from the surveys. High reverberation times were found in all churches, which is not considered optimal for the enclosed areas of the temples. The quality indices were analyzed and it was found how the different materials influence in the acoustic behavior of each enclosure. For subjective evaluation, a survey was implemented (that was previously validated) where the association between acoustic and psychoacoustic parameters was privileged; this allowed to find those objective parameters who were strongly related to the subjective ones, as well as those with lower correlation. Photographic and graphic material and other historical documents allowed the reconstruction of each church for its modeling, and also the evaluation of the performance of all the temples in the presence of their congregation. The interest in obtaining more accurate acoustic data of the San Ignacio Mini Church, which is now in ruins, led to the use of most powerful methods, as for example the image-sources "Ray Tracing Impact" method. For this, an audio archive was used, representing a male voice of a priest in the Jesuit-Guaraní language; recovering in this way intangible cultural heritage.

Análise da qualidade de energia de um parque eólico com ligação à rede eléctrica

Tese de mestrado integrado em Engenharia da Energia e do Ambiente, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Modelling and simulation strategies for the electric systems of large passenger aircraft

The simulation of a power system such as the More Electric Aircraft is a complex problem. There are conflicting requirements of the simulation, for example in order to reduce simulation run-times, power ratings that need to be established over long periods of the flight can be calculated using a fairly coarse model, whereas power quality is established over relatively short periods with a detailed model. An important issue is to establish the requirements of the simulation work at an early stage. This paper describes the modelling and simulation strategy adopted for the UK TIMES project, which is looking into the optimisation of the More Electric Aircraft from a system level. Essentially four main requirements of the simulation work have been identified, resulting in four different types of simulation. Each of the simulations is described along with preliminary models and results.

Modelling, simulation and validation of a twelve-pulse autotransformer rectifier for aerospace applications

A microcap SPICE circuit-level model of a 12-pulse autotransformer based rectifier for an aircraft fuel-pump motor drive is described. The importance of including the nonlinear magnetising inductance of the interphase transformers is illustrated. Small supply voltage distortions are seen to result in current imbalance in the interphase transformers, degrading the rectifier input current, and may lead to infringement of the power quality specification. The model has been validated for various operating supply voltages, frequencies and output powers, against measurements from a 3.75 kW unit.

Analysis and improvement of performance in LCL filter-based PWM rectifier/inverter application using hybrid damping approach

A hybrid passive-active damping solution with improved system stability margin and enhanced dynamic performance is proposed for high power grid interactive converters. In grid connected active rectifier/inverter application, line side LCL filter improves the high frequency attenuation and makes the converter compatible with the stringent grid power quality regulations. Passive damping though offers a simple and reliable solution but it reduces overall converter efficiency. Active damping solutions do not increase the system losses but can guarantee the stable operation up to a certain speed of dynamic response which is limited by the maximum bandwidth of the current controller. This paper examines this limit and introduces a concept of hybrid passive-active damping solution with improved stability margin and high dynamic performance for line side LCL filter based active rectifier/inverter applications. A detailed design, analysis of the hybrid approach and trade-off between system losses and dynamic performance in grid connected applications are reported. Simulation and experimental results from a 10 kVA prototype demonstrate the effectiveness of the proposed solution. An analytical study on system stability and dynamic response with the variations of various controller and passive filter parameters is presented.

A multi-modular second life hybrid battery energy storage system for utility grid applications

The modern grid system or the smart grid is likely to be populated with multiple distributed energy sources, e.g. wind power, PV power, Plug-in Electric Vehicle (PEV). It will also include a variety of linear and nonlinear loads. The intermittent nature of renewable energies like PV, wind turbine and increased penetration of Electric Vehicle (EV) makes the stable operation of utility grid system challenging. In order to ensure a stable operation of the utility grid system and to support smart grid functionalities such as, fault ride-through, frequency response, reactive power support, and mitigation of power quality issues, an energy storage system (ESS) could play an important role. A fast acting bidirectional energy storage system which can rapidly provide and absorb power and/or VARs for a sufficient time is a potentially valuable tool to support this functionality. Battery energy storage systems (BESS) are one of a range suitable energy storage system because it can provide and absorb power for sufficient time as well as able to respond reasonably fast. Conventional BESS already exist on the grid system are made up primarily of new batteries. The cost of these batteries can be high which makes most BESS an expensive solution. In order to assist moving towards a low carbon economy and to reduce battery cost this work aims to research the opportunities for the re-use of batteries after their primary use in low and ultra-low carbon vehicles (EV/HEV) on the electricity grid system. This research aims to develop a new generation of second life battery energy storage systems (SLBESS) which could interface to the low/medium voltage network to provide necessary grid support in a reliable and in cost-effective manner. The reliability/performance of these batteries is not clear, but is almost certainly worse than a new battery. Manufacturers indicate that a mixture of gradual degradation and sudden failure are both possible and failure mechanisms are likely to be related to how hard the batteries were driven inside the vehicle. There are several figures from a number of sources including the DECC (Department of Energy and Climate Control) and Arup and Cenex reports indicate anything from 70,000 to 2.6 million electric and hybrid vehicles on the road by 2020. Once the vehicle battery has degraded to around 70-80% of its capacity it is considered to be at the end of its first life application. This leaves capacity available for a second life at a much cheaper cost than a new BESS Assuming a battery capability of around 5-18kWhr (MHEV 5kWh - BEV 18kWh battery) and approximate 10 year life span, this equates to a projection of battery storage capability available for second life of >1GWhrs by 2025. Moreover, each vehicle manufacturer has different specifications for battery chemistry, number and arrangement of battery cells, capacity, voltage, size etc. To enable research and investment in this area and to maximize the remaining life of these batteries, one of the design challenges is to combine these hybrid batteries into a grid-tie converter where their different performance characteristics, and parameter variation can be catered for and a hot swapping mechanism is available so that as a battery ends it second life, it can be replaced without affecting the overall system operation. This integration of either single types of batteries with vastly different performance capability or a hybrid battery system to a grid-tie 3 energy storage system is different to currently existing work on battery energy storage systems (BESS) which deals with a single type of battery with common characteristics. This thesis addresses and solves the power electronic design challenges in integrating second life hybrid batteries into a grid-tie energy storage unit for the first time. This study details a suitable multi-modular power electronic converter and its various switching strategies which can integrate widely different batteries to a grid-tie inverter irrespective of their characteristics, voltage levels and reliability. The proposed converter provides a high efficiency, enhanced control flexibility and has the capability to operate in different operational modes from the input to output. Designing an appropriate control system for this kind of hybrid battery storage system is also important because of the variation of battery types, differences in characteristics and different levels of degradations. This thesis proposes a generalised distributed power sharing strategy based on weighting function aims to optimally use a set of hybrid batteries according to their relative characteristics while providing the necessary grid support by distributing the power between the batteries. The strategy is adaptive in nature and varies as the individual battery characteristics change in real time as a result of degradation for example. A suitable bidirectional distributed control strategy or a module independent control technique has been developed corresponding to each mode of operation of the proposed modular converter. Stability is an important consideration in control of all power converters and as such this thesis investigates the control stability of the multi-modular converter in detailed. Many controllers use PI/PID based techniques with fixed control parameters. However, this is not found to be suitable from a stability point-of-view. Issues of control stability using this controller type under one of the operating modes has led to the development of an alternative adaptive and nonlinear Lyapunov based control for the modular power converter. Finally, a detailed simulation and experimental validation of the proposed power converter operation, power sharing strategy, proposed control structures and control stability issue have been undertaken using a grid connected laboratory based multi-modular hybrid battery energy storage system prototype. The experimental validation has demonstrated the feasibility of this new energy storage system operation for use in future grid applications.

DC-link voltage control strategy for reducing capacitance and total harmonic distortion in single-phase grid-connected photovoltaic inverters

High-volume capacitance is required to buffer the power difference between the input and output ports in single-phase grid-connected photovoltaic inverters, which become an obstacle to high system efficiency and long device lifetime. Furthermore, total harmonic distortion becomes serious when the system runs into low power level. In this study, a comprehensive analysis is introduced for two-stage topology with the consideration of active power, DC-link (DCL) voltage, ripple and capacitance. This study proposed a comprehensive DCL voltage control strategy to minimise the DCL capacitance while maintaining a normal system operation. Furthermore, the proposed control strategy is flexible to be integrated with the pulse-skipping control that significantly improves the power quality at light power conditions. Since the proposed control strategy needs to vary DCL voltage, an active protection scheme is also introduced to prevent any voltage violation across the DCL. The proposed control strategy is evaluated by both simulation and experiments, whose results confirm the system effectiveness.

Macroinvertebrate abundance in tropical Andean streams, Ecuador

Deforestation in the tropical Andes is affecting ecological conditions of streams, and determination of how much forest should be retained is a pressing task for conservation, restoration and management strategies. We calculated and analyzed eight benthic metrics (structural, compositional and water quality indices) and a physical-chemical composite index with gradients of vegetation cover to assess the effects of deforestation on macroinvertebrate communities and water quality of 23 streams in southern Ecuadorian Andes. Using a geographical information system (GIS), we quantified vegetation cover at three spatial scales: the entire catchment, the riparian buffer of 30 m width extending the entire stream length, and the local scale defined for a stream reach of 100 m in length and similar buffer width. Macroinvertebrate and water quality metrics had the strongest relationships with vegetation cover at catchment and riparian scales, while vegetation cover did not show any association with the macroinvertebrate metrics at local scale. At catchment scale, the water quality metrics indicate that ecological condition of Andean streams is good when vegetation cover is over 70%. Further, macroinvertebrate community assemblages were more diverse and related in catchments largely covered by native vegetation (>70%). Overall, our results suggest that retaining an important quantity of native vegetation cover within the catchments and a linkage between headwater and riparian forests help to maintain and improve stream biodiversity and water quality in Andean streams affected by deforestation. Also, this research proposes that a strong regulation focused to the management of riparian buffers can be successful when decision making is addressed to conservation/restoration of Andean catchments.

Estimação de potência em tempo real utilizando a transformada wavelet

The goal of the power monitoring in electrical power systems is to promote the reliablility as well as the quality of electrical power.Therefore, this dissertation proposes a new theory of power based on wavelet transform for real-time estimation of RMS voltages and currents, and some power amounts, such as active power, reactive power, apparent power, and power factor. The appropriate estimation the of RMS and power values is important for many applications, such as: design and analysis of power systems, compensation devices for improving power quality, and instruments for energy measuring. Simulation and experimental results obtained through the proposed MaximalOverlap Discrete Wavelet Transform-based method were compared with the IEEE Standard 1459-2010 and the commercial oscilloscope, respectively, presenting equivalent results. The proposed method presented good performance for compact mother wavelet, which is in accordance with real-time applications.

Contribuições para estratégia de controle aplicada à geração fotovoltaica interconectada à rede elétrica

Generation systems, using renewable sources, are becoming increasingly popular due to the need for increased use of electricity. Currently, renewables sources have a role to cooperate with conventional generation, due to the system limitation in delivering the required power, the need for reduction of unwanted effects from sources that use fossil fuels (pollution) and the difficulty of building new transmission and/or distribution lines. This cooperation takes place through distributed generation. Therefore, this work proposes a control strategy for the interconnection of a PV (Photovoltaic) system generation distributed with a three-phase power grid through a connection filter the type LCL. The compensation of power quality at point of common coupling (PCC) is performed ensuring that the mains supply or consume only active power and that his currents have low distorcion. Unlike traditional techniques which require schemes for harmonic detection, the technique performs the harmonic compensation without the use of this schemes, controlling the output currents of the system in an indirect way. So that there is effective control of the DC (Direct Current) bus voltage is used the robust controller mode dual DSMPI (Dual-Sliding Mode-Proportional Integral), that behaves as a sliding mode controller SM-PI (Sliding Mode-Proportional Integral) during the transition and like a conventional PI (Proportional Integral) in the steady-state. For control of current is used to repetitive control strategy, which are used double sequence controllers (DSC) tuned to the fundamental component, the fifth and seventh harmonic. The output phase current are aligned with the phase angle of the utility voltage vector obtained from the use of a SRF-PLL (Synchronous Reference Frame Phase-Locked-Loop). In order to obtain the maximum power from the PV array is used a MPPT (Maximum Power Point Tracking) algorithm without the need for adding sensors. Experimental results are presented to demonstrate the effectiveness of the proposed control system.

Indicador de inconformidades em instalações elétricas de baixa tensão

With the progress of devices technology, generation and use of energy ways, power quality parameters start to influence more significantly the various kinds of power consumers. Currently, there are many types of devices that analyze power quality. However, there is a need to create devices, and perform measurements and calculate parameters, find flaws, suggest changes, and to support the management of the installation. In addition, you must ensure that such devices are accessible. To maintain this balance, one magnitude measuring method should be used which does not require great resources processing or memory. The work shows that application of the Goertzel algorithm, compared with the commonly used FFT allows measurements to be made using much less hardware resources, available memory space to implement management functions. The first point of the work is the research of troubles that are more common for low voltage consumers. Then we propose the functional diagram indicate what will be measured, calculated, what problems will be detected and that solutions can be found. Through the Goertzel algorithm simulation using Scilab, is possible to calculate frequency components of a distorted signal with satisfactory results. Finally, the prototype is assembled and tests are carried out by adjusting the parameters necessary for one to maintain a reliable device without increasing its cost.

Estudo dos harmônicos entre diferentes sistemas de excitação de máquinas síncronas

Dissertação (Mestrado)

Representing clinical documents to support automatic retrieval of evidence from the Cochrane Library

The overall aim of our research is to develop a clinical information retrieval system that retrieves systematic reviews and underlying clinical studies from the Cochrane Library to support physician decision making. We believe that in order to accomplish this goal we need to develop a mechanism for effectively representing documents that will be retrieved by the application. Therefore, as a first step in developing the retrieval application we have developed a methodology that semi-automatically generates high quality indices and applies them as descriptors to documents from The Cochrane Library. In this paper we present a description and implementation of the automatic indexing methodology and an evaluation that demonstrates that enhanced document representation results in the retrieval of relevant documents for clinical queries. We argue that the evaluation of information retrieval applications should also include an evaluation of the quality of the representation of documents that may be retrieved. ©2010 IEEE.