AVALIAÇÃO AGRONÔMICA DE LINHAGENS E HÍBRIDOS DE MAMOEIRO

RESUMOObjetivou-se avaliar o potencial agronômico de híbridos e linhagens de mamoeiros sintetizados pela Embrapa Mandioca e Fruticultura, visando a identificar e a selecionar genótipos com boas características agronômicas, passíveis de exploração no programa de melhoramento genético e uso direto no sistema de produção de mamão. O trabalho foi conduzido em área do Setor de Campos Experimentais da Embrapa Mandioca e Fruticultura, em Cruz das Almas - BA. Foram avaliados 22 genótipos (oito linhagens, doze híbridos e duas testemunhas: Sunrise Solo e Tainung nº 1) em delineamento de blocos casualizados, com quatro repetições, contendo seis plantaspor parcela, totalizando 528 plantas no ensaio. Para a maioria dos caracteres, observaram-se diferenças significativas a 1% e 5% de probabilidade, exceto para diâmetro do caule (DC). A linhagem L60 e o híbrido H10.60 destacaram-se com as menores médias para a altura da planta (AP) e a altura de inserção dos primeiros frutos (AIPF), e não diferiram estatisticamente entre si. As linhagens L10 e L72, e os híbridos H10.26, H10.60 e H10.72 apresentaram maiores médias de números de frutos comerciais (NFC) que a testemunha Sunrise Solo. Para produtividade (PROD), observou-se ampla variabilidade entre os tratamentos, sendo que 75% dos híbridos e linhagens superaram as testemunhas. Mais de 50% dos genótipos apresentaram médias de sólidos solúveis (SS) superiores a 12°Brix. Com o objetivo de reunir características favoráveis para o desenvolvimento de novas variedades, as linhagens e os híbridos que apresentaram comportamentos satisfatórios para os principais caracteres foram: L60 e H10.60, para AIPF e AP; L10, L72, H10.26, H10.60 e H10.72, para NFC; L10, H10.72, H26.72, H33.56 e H36.45 para PROD; e L26, L36, H10.26, H10.60 e H60.72, para SS.

NOVOS HÍBRIDOS DE MAMOEIRO AVALIADOS NAS CONDIÇÕES DE CULTIVO TRADICIONAL E NO SEMIÁRIDO BRASILEIRO

RESUMOO mamoeiro vem tornando-se uma das principais fruteiras cultivadas no Brasil dado ao grande mercado interno e ao crescente mercado de exportação. A demanda pela fruta fez crescer, nos últimos anos, as áreas de cultivo que lentamente se direcionam ao semiárido, e, com isso, cresce a necessidade de novas variedades melhoradas para o cultivo. Neste sentido, foram gerados híbridos de mamão pertencentes aos dois grupos heteróticos: Solo e Formosa,estes, avaliados consecutivamente ao longo do ciclo da cultura, tanto em um ambiente tradicional de cultivo como em um ambiente recente para a cultura, o semiárido. Foram identificados híbridos que superam as testemunhas em quase o dobro no aspecto de rendimento, tanto no grupo de híbridos pertences à categoria Solo (UC14, UC15 e UC16) quanto à categoria Formosa (UC10 e UC12). Estes, além de elevado rendimento, foram detentores de características favoráveis, como o elevado teor de sólidos solúveis e o baixo número de flores estéreis. Em adição, o coeficiente de repetibilidade das características avaliadas sugere que, dentre as características ligadas ao rendimento, o peso médio de fruto é a mais estável ao longo do ciclo de produção.

CARACTERIZAÇÃO DE FRUTOS E PROPAGAÇÃO DE PORTA-ENXERTOS HÍBRIDOS DE CITROS EM AMBIENTE PROTEGIDO

A diversificação de uso de porta-enxertos de citros é importante no Brasil devido à presença de diversos estresses abióticos e bióticos, além da busca por atributos horticulturais desejáveis como nanismo, alta eficiência de produção e indução de boa qualidade aos frutos. Para a seleção de um genótipo com potencial de uso como porta-enxerto, porém, o desempenho na fase de propagação também é relevante. Assim, caracterizaram-se os frutos e avaliou-se a propagação em ambiente protegido de porta-enxertos híbridos de citros obtidos ou selecionados pelo Programa de Melhoramento Genético de Citros da Embrapa: citrandarins ‘Indio’, ‘Riverside’ e ‘San Diego’, híbridos HTR-051, TSKC x (LCR x TR)-040 e 059, LVK x LCR-010 e 038, TSKC x CTTR-002, TSKC x CTSW-041 e LCR x TR-001, além das variedades comerciais citrumelo ‘Swingle 4475’, trifoliata ‘Flying Dragon’, limoeiro ‘Cravo Santa Cruz’ e tangerineira ‘Sunki Tropical’. Foram avaliados variáveis biométricas, fisiológicas e coeficientes técnicos. O delineamento experimental foi em blocos ao acaso, com quatro repetições e 50 plantas na parcela ou 20 frutos por genótipo, conforme a avaliação. Citrumelo ‘Swingle’ e LVK x LCR-010 apresentaram alta produção de sementes por fruto, enquanto HTR-051 e LCR x TR-001 produziram as menores quantidades. A poliembrionia foi superior para TSKC x CTTR-002, TSKC x (LCR x TR)–040, LCR x TR-001, citrandarins ‘Indio’, ‘Riverside’ e ‘San Diego’ e tangerineira ‘Sunki Tropical’, tendo trifoliata ‘Flying Dragon’ e LVK x LCR-010 apenas 45% de poliembrionia média. A emergência de citrandarin ‘Riverside’ foi mais rápida e uniforme em relação aos demais genótipos. O crescimento vegetativo da parte aérea e do sistema radicular foi superior para citrandarin ‘Riverside’, TSKC x (LCR x TR)-059, tangerineira ‘Sunki Tropical’, citrumelo ‘Swingle’ e limoeiro ‘Cravo’ e seus híbridos. Todos os híbridos de citros avaliados apresentam potencial de uso como porta-enxertos.

Metais pesados em águas superficiais como estratégia de caracterização de bacias hidrográficas

The input of heavy metals concentrations determinated by ICP-AES, in samples of the Cambé river basin, was evaluated by using the Principal Component Analysis. The results distinguishes clearly one site, which is strongly influenced by almost all elements studied. Special attention was given to Pb, because of the presence of one battery industry in this area. Some downstream samples were associated with the same characteristics of this site, showing residual action of contaminants along the basin. Other sites presented influence of soil elements, plus Cr near a tannery industry. This study allowed to distinguish different sites in the upper basin of the Cambé (Londrina-PR-BR), in accordance to elements input.

Avaliação quimiométrica da distribuição de metais pesados em composto de lixo urbano domiciliar

The main obstacle to the use of compost from urban waste in agriculture is the presence of heavy metals. Once in the soil, their effect is accumulative and they may contaminate crops and water. The present study reports the evaluation of the chemical distributions of Cu, Pb, Mn and Zn in three different sized fractions (unsieved, < 1,18mm and > 1,18mm) of compost, by means of a sequencial extraction procedure and a chemometric analysis of the total content of all metals in each fraction. The pattern recognition methods showed significant differences in total heavy metal contents for the different fractions. The finest one was the most contaminated. Meanwhile, this fraction presented lower amounts of metals in avaliable forms. This behavior can be attributed to the presence of metal particles in their elemental states in this fraction.

Obtenção de um material adsorvente para íons de metais pesados, através da eletropolimerização de 2-mercaptobenzimidazol à superfície de carbono vítreo reticulado

Electrochemical methods applied to organic species transformation has been used as excellent synthesis tools. C-C bonds can be established, making possible polymer synthesis by both anodic and cathodic reactions of suitable monomer species at the working electrode surface. In this study, anodic procedure was used to electropolymerization of 2-mercaptobenzimidazole at reticulated glassy carbon (RGC) surface. 2-mercaptobenzimidazole presents ligand sites towards Hg2+, Ag+ and Cu2+ ions. The obtained material has been able to adsorb the above mentioned ions in aqueous solution.

Coordenação local do Eu(III) em híbridos orgânicos/inorgânicos emissores de luz branca

Eu3+ luminescence and EXAFS (Extended X-ray Absorption Fine Structure) results are presented for organic-inorganic hybrid gel hosts composed of a siliceous network to which small chains of oxyethylene units are covalently grafted by means of urea bridges. Coordination numbers for Eu3+ ions range from 12.8 to 9.7 with increasing Eu3+ concentration while the Eu3+-first neighbours mean distance is found to be constant at 2.48-2.49 Å in the same concentration range. Emission spectra display a broad band in the green/blue spectral region superposed to narrow lines appearing in the yellow/red region in such a way that for the eyes emission appears white. The broad band is assigned to intrinsic NH groups emission and also to electron-hole recombination in the nanosised siliceous domains. The narrow lines are assigned to intra-4f6, 5D0->7F0-4 Eu3+ transitions and from the energy position of the 7F0-4 levels a mean distance could be calculated for the Eu3+-first neighbours. The calculated results are in good agreement with the experimental ones obtained from EXAFS analysis.

Remoção de metais pesados de efluentes industriais por aluminossilicatos

This review had as aim the bibliography research for the use of aluminosilicates to remove heavy metals from wastewaters. Advanced studies based on parameters that have influence for removal of heavy metals as pH, metal concentration, effect of ligants and removal capacity of zeolites and clays, were reported. These studies demonstrate that aluminosilicates can be successfully used for the removal of heavy metals under the optimized conditions.

Híbridos inorgânico-orgânicos derivados da reação de filossicatos com organossilanos

Silylation reactions involving hydroxylated surfaces are an important route for synthesis of new materials that could present selected properties, for application in different areas such as catalysis, chromatography, adsorption and electrochemistry. An overview of many synthetic routes, comprising organosilanes to yield phyllosilicates is now presented.

Distribuição de metais pesados em sedimentos do sistema estuarino da Ilha de Vitória-ES

Heavy-metal concentration in sediment is an important parameter for identifying pollution sources and assessing pollution levels in aquatic ecosystems. In this context, the present study aimed at determining concentrations of heavy metals in sediments from the Vitória estuarine system, Brazil. Twenty nine stations were surveyed to assess the spatial distribution of heavy metals. The metals for silt-clay fractions (<63 µm) were analyzed through atomic absorption spectrometry. A discriminant analysis segregated the stations in four groups representing four areas within the estuarine system. The Espírito Santo Bay showed the lowest metal concentrations, while the Vitória harbor canal showed the highest. We concluded that concentrations of heavy metals reflect natural conditions and the contribution of human activities from sewage and industrial effluents. It was not possible to directly associate metal concentrations to specific pollution sources.

Remoção de metais pesados de efluentes aquosos pela zeólita natural escolecita - influência da temperatura e do pH na adsorção em sistemas monoelementares

Cation exchange capabilities of a Brazilian natural zeolite, identified as scolecite, were evaluated for application in wastewater control. We investigated the process of sorption of chromium(III), nickel(II), cadmium(II) and manganese(II) in synthetic aqueous effluents, including adsorption isotherms of single-metal solutions. The natural zeolite showed the ability to take up the tested heavy metals in the order Cr(III) > Cd(II) > Ni(II) > Mn(II), and this could be related to the valence and the hydration radius of the metal cations. The influence of temperature (25, 40 and 60 ºC) and initial pH value (from 4 to 6) was also evaluated. It was found that the adsorption increased substantially when the temperature was raised to 60 ºC and that maximum adsorption capacity was observed at pH 6. These results demonstrate that scolecite can be used for removal of heavy metals from aqueous effluents, under optimized conditions.

Nanocompósitos de matriz polimérica: estratégias de síntese de materiais híbridos

Associating the well known advantages of hybrid materials to the wide potential of nanomaterials, the new and featuring class of polymer nanocomposites turned into one of the most intensively researched areas. This review highlights recent developments in the field of the synthesis of polymer based nanocomposites. Important issues related to the surface modification of fillers, in order to promote the compatibility between the inorganic/organic components, are also reported. The enhancement of the physical properties and the potential applications of polymer nanocomposites are considered in typical examples, given for each synthetic method described.

Materiais híbridos orgânico-inorgânicos: preparação e algumas aplicações

The preparation and application of organic-inorganic hybrid materials are under fast development and constitute an interesting research topic on account of the versatility and wide range of applications offered by these materials. These properties can be achieved due to the mixture of the components at the molecular level. The present review covers the state of the art, the most useful preparation routes and the potential applications of these materials.

Estudo dos efeitos do silício e do fósforo na redução da disponibilidade de metais pesados em área de mineração

This study was developed with a soil contaminated by heavy metals, with the purpose of evaluating the action of silicon and phosphorus as protection agents through simple extractions by DTPA. The collected samples were prepared and incubated with five doses of silicon and five doses of phosphorus, with four replicates, amounting to 100 experimental units. After 30 and 60 days, samples of each treatment were collected, submitted to pH analyses and simple extraction by DTPA. The amounts of DTPA-extracted metals depended on the doses of silicon and phosphorus and on the pH. Treatments with silicon and phosphorus was efficient in decreasing the availability of heavy metals in soil.

Metales pesados y toxicidad de aguas del Río Aconcagua en Chile

The toxicity of surface waters in a zone with mining activity in the Aconcagua River was determined through growth inhibition bioassays of Pseudokirchneriella subcapitata, and correlated with heavy metal concentrations. Results show that the waters near the discharge of the mining effluent displayed toxicity during all periods of study; the molybdenum and copper concentration exceeded the norms of water quality. The correlations between the concentrations of metals and the growth rate of P. subcapitata varied in the different periods of the study; inverse and significant correlations with copper stand out in some periods.