The ABCs of teaching alphabet knowledge : affordances and challenges of ‘weaving’ visible and invisible pedagogies

As researchers interested in the pursuit of high quality/high equity literacy learning outcomes, we focus on the learning experiences of five early years French students, with a special regard for those who are already considered as being at-risk of educational failure. We narrow the empirical focus to a single lesson on a mechanical concept of print, that is matching lower and upper case alphabet letters. In doing so, we examine a deeply philosophical question: Which pedagogical practices dis/enable what sorts of early years students as literacy learners? We extend Cazden’s (2006) notion of ‘weaving’ knowledge across dimensions of knowing to describe how the case study teacher ‘weaves’ visible and invisible pedagogies over the four movements of a lesson. The findings reveal different pedagogical framings (Bernstein, 1996) have potentially different cognitive and social effects that constitute different kinds of literacy knowledge and oppressive subject positions for at-risk students (Young, 1990).

Creating efficiencies in teaching : where are the right resources when you need them?

Early career engineering academics are encouraged to join and contribute to established research groups at the leading edge of their discipline. This is often facilitated by various staff development and support programs. Given that academics are often appointed primarily on the basis of their research skills and outputs, such an approach is justified and is likely to result in advancing the individual academic’s career. It also enhances their capacity to attract competitive research funding, while contributing to the overall research performance of their institution, with further potential for an increased share of government funding. In contrast, there is much less clarity of direction or availability of support mechanisms for those academics in their role as teachers. Following a general induction to teaching and learning at their institution, they would commonly think about preparing some lecture materials, whether for delivery in a face-to-face or on-line modality. Typically they would look for new references and textbooks to act as a guide for preparing the content. They would probably find out how the course has been taught before, and what laboratory facilities and experiments have been used. In all of these and other related tasks, the majority of newly appointed academics are guided strongly by their own experiences as students, rather than any firm knowledge of pedagogical principles. At a time of increased demands on academics’ time, and high expectations of performance and productivity in both research and teaching, it is essential to examine possible actions to support academics in enhancing their teaching performance in effective and efficient ways. Many resources have been produced over the years in engineering schools around the world, with very high intellectual and monetary costs. In Australia, the last few years have seen a surge in the number of ALTC/OLT projects and fellowships addressing a range of engineering education issues and providing many resources. There are concerns however regarding the extent to which these resources are being effectively utilised. Why are academics still re-inventing the wheel and creating their own version of teaching resources and pedagogical practice? Why do they spend so much of their precious time in such an inefficient way? A symposium examining the above issues was conducted at the AAEE2012 conference, and some pointers to possible responses to the above questions were obtained. These are explored in this paper and supplemented by the responses to a survey of a group of engineering education leaders on some of the aspects of these research questions. The outcomes of the workshop and survey results have been analysed in view of the literature and the ALTC/OLT sponsored learning and teaching projects and resources. Other factors are discussed, including how such resources can be found, how their quality might be evaluated, and how assessment may be appropriately incorporated, again using readily available resources. This study found a strong resonance between resources reuse with work on technology acceptance (Davis, 1989), suggesting that technology adoption models could be used to encourage resource sharing. Efficient use of outstanding learning materials is an enabling approach. The paper provides some insights on the factors affecting the re-use of available resources, and makes some recommendations and suggestions on how the issue of resources re-use might be incorporated in the process of applying and completing engineering education projects.

Delirium knowledge and recognition : a randomized controlled trial of a web-based educational intervention for acute care nurses

Delirium is a significant problem for older hospitalized people and is associated with poor outcomes. It is poorly recognized and evidence suggests that a major reason is lack of education. Nurses, who are educated about delirium, can play a significant role in improving delirium recognition. This study evaluated the impact of a delirium specific educational website. A cluster randomized controlled trial, with a pretest/post-test time series design, was conducted to measure delirium knowledge (DK) and delirium recognition (DR) over three time-points. Statistically significant differences were found between the intervention and non-intervention group. The intervention groups' DK scores were higher and the change over time results were statistically significant [T3 and T1 (t=3.78 p=<0.001) and T2 and T1 baseline (t=5.83 p=<0.001)]. Statistically significant improvements were also seen for DR when comparing T2 and T1 results (t=2.56 p=0.011) between both groups but not for changes in DR scores between T3 and T1 (t=1.80 p=0.074). Participants rated the website highly on the visual, functional and content elements. This study supports the concept that web-based delirium learning is an effective and satisfying method of information delivery for registered nurses. Future research is required to investigate clinical outcomes as a result of this web-based education.

Knowledge unlatched : enabling open access for scholarly books

Although digital technology has made it possible for many more people to access content at no extra cost, fewer people than ever before are able to read the books written by university-based researchers. This workshop explores the role that open access licenses and collective action might play in reviving the scholarly monograph: a specialised area of academic publishing that has seen sales decline by more than 90 per cent over the past three decades. It also introduces Knowledge Unlatched an ambitious attempt to create an internationally coordinated, sustainable route to open access for scholarly books. Knowledge Unlatched is now in its pilot phase.

Knowledge unlatched : open access and scholarly books - workshop report

On 19 June 2013 Knowledge Unlatched and the Berkman Center for Internet and Society at Harvard Law School jointly convened a one-day workshop titled Open Access and Scholarly Books in Cambridge, MA. The workshop brought together a group of 21 invited publishers, librarians, academics and Open Access innovators to discuss the challenge of making scholarly books Open Access. This report captures discussions that took place on the day.

Knowledge unlatched announces the launch of its pilot collection [Blog]

Frances Pinter and I have been visiting fellows at the Big Innovation Centre for more than a year now. Tucked away in a corner, inspired by BIC’s open innovation vision, we have been attempting to solve a problem that continues to perplex many in the era of digital affordance: creating sustainable markets for high quality new content that include free access for end users.

What knowledge do ICU nurses have with regard to the effects of noise exposure in the Intensive Care Unit?

This small-scale study was undertaken to assess what knowledge nursing staff from a General Intensive Care Unit held with regard to noise exposure. To assess knowledge a self-administered multiple-choice questionnaire was used. Rigorous peer-review insured content validity. This study produced poor results in terms of the knowledge nurses held with regard to noise related issues in particular the psychophysiological effects and current legislation concerning its safe exposure. Non-parametric testing, using Kruskal–Wallis found no significant difference between nursing grades, however, descriptive analysis demonstrated that the staff nurse grade (D and E) performed better overall. Whilst the results of this study may seem self-evident in some respects, it is the problems of exposure to excessive noise levels for both patients and hospital personnel, which are clearly not understood. The effects noise exposure has on individuals for example decreased wound healing; sleep deprivation and cardiovascular stimulation must be of concern especially in terms of patient care but more so for nursing staff especially the effects noise levels can have on cognitive task performance.

Learning and teaching epidemiology with audience response technology

Background The learning and teaching of epidemiology is core to many public health programs. Many students find the content of epidemiology, and specifically risk of bias assessment, challenging to learn. Howbeit, learning is enhanced when knowledge is able to be acquired from an active-learning, hands-on experience. Methods The innovative use of wireless audience response technology “clickers” was incorporated into the lectures of the university’s post-graduate epidemiology units and the tailored epidemiological modules delivered for professional disciplines (e.g. optometry). Clickers were used to apply several pedagogical approaches of active learning including peer-instruction and real-world simulation. Students were also assessed for their gain in knowledge within the lecture (pre-post) and their perceptions of how the use of clickers helped them learn. The routine university-wide end of semester Insight Survey provided further information of the student’s satisfaction with the approach. Results The technology was useful in identifying deficits of knowledge of key concepts either before or after instruction. Where key concepts were re-tested post-lecture, as expected, knowledge increased significantly and provided immediate feed-back to students. Across the lecture series, typically 85% of students identified the technology helped them learn, increased their opportunity to interact with the lecturer, and recommend their use for future classes. The Insight Survey report identified 93% of respondents identified the unit in which clickers were consistently used provided good learning opportunities. Numerous student comments supported the teaching method. Conclusions Epidemiological subject matter lends itself to incorporation of audience response technology. The use of the technology to facilitate interactive voting provides an instant response and participation of everyone to enhance the classroom experience. The pedagogical approach increases students’ knowledge and increases their satisfaction with the unit.

An investigation into increasing the extent of energy efficiency knowledge and skills in engineering education

Today, many sectors across society are recognising the need to swiftly reduce their growing energy demand, as well as meeting remaining demand with low emissions options. A key ingredient to addressing such issues is equipping professionals – in particular engineers – with emerging energy efficiency knowledge and skills. This paper responds to an identified engineering education gap in Australia, by investigating options to increase energy efficiency content for both undergraduate and postgraduate engineers. The authors summarise the findings of the multi-stage methodology funded by the National Framework for Energy Efficiency (2008-2009), highlighting identified key barriers and benefits to such curriculum renewal. The findings are intended for use by engineering departments, accreditation agencies, professional bodies and government, to identify opportunities for moving forward based on rigorous research, and then to strategically plan the transition. This process, focused on energy efficiency, may also provide valuable parallels for a range of sustainable engineering related topics.

Supporting future curriculum leaders in embedding Indigenous knowledge on teaching practicum

This report documents the outcomes of the OLT funded project on Supporting Future Curriculum Leaders in Embedding Indigenous Knowledges on Teaching Practicum. This project investigated the learning and teaching relationships between pre-service teachers and their supervisors on practicum, with pre-service teachers who were specifically engaged (Aboriginal and Torres Strait Islander and non-Indigenous pre-service teachers studying the Indigenous Studies minor) with embedding Indigenous knowledge and perspectives in their teaching practice. It explored the negotiations of expectations, role modelling and the interactions that occur between pre-service teachers, their supervising teachers and QUT staff involved in supporting teaching practicum. The intent was to design a model to develop long term, future-oriented opportunities for teachers to develop expertise in embedding Indigenous knowledge and perspectives in curriculum, pedagogy and assessment.

Using a visually-based assignment to reinforce and assess design history knowledge and understanding

This paper presents a visual timeline-based assignment used in an undergraduate Industrial Design History, Theory and Critcism unit. The assignment was developed in order to find a better way of supporting design history learning than an exam or essay assessment. It was developed using constructive alignment and it allows design students to use their strong visual thinking skills to understand unfamiliar content, develop their visual literacy of design history, and think deeply about the links between the designs, styles, movements, events and people in their timeline. The task produced a variety of responses, from websites and electronic presentations to large paper timelines, scrolls and 3D models. These have been admired by peers and used for end of year shows and permanent displays. Questionnaires were issued to students to gain feedback about the assessment. Students stated that the visual nature of the assignment helped them to understand how different aspects of design history related to each other, assisted with retaining the information, and that it was more interesting and fun than a report or an exam. This paper explores the theories behind and the benefits of using such methods of assessment for design history courses.

On the operationalisation of conceptions of learning in higher education and their association with students’ knowledge and experiences of their learning

Conceptions of learning, as well as other associated aspects of prior knowledge, are theoretically important factors in influencing the manner in which the content and context of learning are engaged. The present study reports on: (a) the operationalisation of some of these factors aimed at isolating sources of explanatory variation that can be used for modelling purposes; and (b) a conservative exploration of the discriminatory power of, and exhibited patterns of association between, such sources of variation as have been isolated. Based on a conservative analytical approach, the results of the present study do not support a single clearly defined empirical model of conceptions of learning and associated constructs. Instead, there is consistent evidence that underlying empirical structures appear to be sensitive to the response context and other factors.

Branding and planning urban knowledge precincts : insights from Brisbane, Australia

Purpose: The paper aims to investigate urban knowledge precincts from the angle of urban planning and place branding. Scope: The paper focuses on urban knowledge precinct development experiences of Brisbane, Australia. Method: The paper uses literature review, policy and content analyses and field observation methods to explore Brisbane’s urban knowledge precincts. Results: The paper reveals insights from Brisbane’s urban knowledge precincts development journey. Recommendations: The paper suggests further research on the topic of branding and planning urban knowledge precincts. Conclusions: The paper reveals that urban knowledge precincts are the nexus of knowledge-based urban development and Brisbane’s precincts potentially provide a competitive edge to the city in the global knowledge economy era.

Interactive content analysis : evaluating interactive variants of non-negative Matrix Factorisation and Latent Dirichlet Allocation as qualitative content analysis aids

This thesis addressed issues that have prevented qualitative researchers from using thematic discovery algorithms. The central hypothesis evaluated whether allowing qualitative researchers to interact with thematic discovery algorithms and incorporate domain knowledge improved their ability to address research questions and trust the derived themes. Non-negative Matrix Factorisation and Latent Dirichlet Allocation find latent themes within document collections but these algorithms are rarely used, because qualitative researchers do not trust and cannot interact with the themes that are automatically generated. The research determined the types of interactivity that qualitative researchers require and then evaluated interactive algorithms that matched these requirements. Theoretical contributions included the articulation of design guidelines for interactive thematic discovery algorithms, the development of an Evaluation Model and a Conceptual Framework for Interactive Content Analysis.

Creative occupations as knowledge practices : innovation and precarity in the creative economy

The ARC Centre of Excellence in Creative Industries and Innovation (herewith CCI) was established with two simple policy objectives. One was to assess anecdotal and boosterish claims about the growth rates of the creative industries, and hence, to measure the size of the creative industries contribution to gross domestic product (GDP). The other was to ascertain the contribution of the creative industries to employment. Preliminary research detailed in Cunningham and Higgs (2009) showed that the existing industrial classifications did not incorporate the terminology of the creative industries, nor did they disaggregate new categories of digital work such as video games. However, we discovered that occupational codes provide a much more fine-grained account of work that would enable us to disaggregate and track economic activity that corresponded to creative industries terminology. Thus was born one major centrepiece of CCI research – the tracking of national occupational codes in pursuit of measuring creative industries policy outcomes. This paper commences with some description of empirical work that investigates creative occupations; however, the real point is to suggest that this type of detailed, occupation-based empirical work has important theoretical potential that has not yet been fully expended (though see Cunningham 2013; Hearn and Bridgstock 2014; Bakhshi, Freeman and Higgs 2013; Hartley and Potts 2014).