Antecedents and consequences of market orientation : an examination in the joint ventures' relational context

Market oriented behaviours have been found to be important predictors of business success across a wide array of studies. Despite their potential importance, research into market oriented behaviours in the joint venture (JV) context is very scarce. This study represents a novel attempt to address this gap by examining a set of antecedent factors which arises from sources outside a traditional firm’s boundary. An extensive review and synthesis of the market orientation and JV literature yielded a set of context-specific antecedent factors relevant to the JV’s relational context. In accordance with the perspective offered by the transaction cost theory, a system of hypotheses about the effects of these antecedent factors on JV’s market oriented behaviours was developed. In order to test these hypotheses, empirical evidence was collected by means of a mail survey to international joint ventures operating in the coastal regions of mainland China. A sample of 191 JV firms was collected as a result. Following well established procedures for scale development and purification as recommended in the methodology literature, the scales were critically trimmed and reviewed for their psychometric properties. The conceptual model was tested with a structural equation model. Results suggested that a number of context-specific antecedents are in fact important determinants of JVs’ level of market oriented behaviours. In addition, the linkage between market oriented behaviours and market performance was also successfully established.

Designing a safety management support system using open architecture databases: the requirements of information representation in the support of managers' risk-related decision-making

This research was conducted at the Space Research and Technology Centre o the European Space Agency at Noordvijk in the Netherlands. ESA is an international organisation that brings together a range of scientists, engineers and managers from 14 European member states. The motivation for the work was to enable decision-makers, in a culturally and technologically diverse organisation, to share information for the purpose of making decisions that are well informed about the risk-related aspects of the situations they seek to address. The research examined the use of decision support system DSS) technology to facilitate decision-making of this type. This involved identifying the technology available and its application to risk management. Decision-making is a complex activity that does not lend itself to exact measurement or precise understanding at a detailed level. In view of this, a prototype DSS was developed through which to understand the practical issues to be accommodated and to evaluate alternative approaches to supporting decision-making of this type. The problem of measuring the effect upon the quality of decisions has been approached through expert evaluation of the software developed. The practical orientation of this work was informed by a review of the relevant literature in decision-making, risk management, decision support and information technology. Communication and information technology unite the major the,es of this work. This allows correlation of the interests of the research with European public policy. The principles of communication were also considered in the topic of information visualisation - this emerging technology exploits flexible modes of human computer interaction (HCI) to improve the cognition of complex data. Risk management is itself an area characterised by complexity and risk visualisation is advocated for application in this field of endeavour. The thesis provides recommendations for future work in the fields of decision=making, DSS technology and risk management.

A process framework for selecting supply system architecture in manufacturing supply chains and networks

The process framework comprises three phases, as follows: scope the supply chain/network; identify the options for supply system architecture and select supply system architecture. It facilitates a structured approach that analyses the supply chain/network contextual characteristics, in order to ensure alignment with the appropriate supply system architecture. The process framework was derived from comprehensive literature review and archival case study analysis. The review led to the classification of supply system architectures according to their orientation, whether integrated; partially integrated; co-ordinated or independent. The classification was combined with the characteristics that influence the selection of supply system architecture to encapsulate the conceptual framework. It builds upon existing frameworks and methodologies by focusing on structured procedure; supporting project management; facilitating participation and clarifying point of entry. The process framework was initially tested in three case study applications from the food, automobile and hand tool industries. A variety of industrial settings was chosen to illustrate transferability. The case study applications indicate that the process framework is a valid approach to the problem; however, further testing is required. In particular, the use of group support system technologies to support the process and the steps involving the participation of software vendors need further testing. However, the process framework can be followed due to the clarity of its presentation. It considers the issue of timing by including alternative decision-making techniques, dependent on the constraints. It is useful for ensuring a sound business case is developed, with supporting documentation and analysis that identifies the strategic and functional requirements of supply system architecture.

Pattern integration in the normal and abnormal human visual system

The processing conducted by the visual system requires the combination of signals that are detected at different locations in the visual field. The processes by which these signals are combined are explored here using psychophysical experiments and computer modelling. Most of the work presented in this thesis is concerned with the summation of contrast over space at detection threshold. Previous investigations of this sort have been confounded by the inhomogeneity in contrast sensitivity across the visual field. Experiments performed in this thesis find that the decline in log contrast sensitivity with eccentricity is bilinear, with an initial steep fall-off followed by a shallower decline. This decline is scale-invariant for spatial frequencies of 0.7 to 4 c/deg. A detailed map of the inhomogeneity is developed, and applied to area summation experiments both by incorporating it into models of the visual system and by using it to compensate stimuli in order to factor out the effects of the inhomogeneity. The results of these area summation experiments show that the summation of contrast over area is spatially extensive (occurring over 33 stimulus carrier cycles), and that summation behaviour is the same in the fovea, parafovea, and periphery. Summation occurs according to a fourth-root summation rule, consistent with a “noisy energy” model. This work is extended to investigate the visual deficit in amblyopia, finding that area summation is normal in amblyopic observers. Finally, the methods used to study the summation of threshold contrast over area are adapted to investigate the integration of coherent orientation signals in a texture. The results of this study are described by a two-stage model, with a mandatory local combination stage followed by flexible global pooling of these local outputs. In each study, the results suggest a more extensive combination of signals in vision than has been previously understood.

The social and entrepreneurial orientation of small businesses:mutually exclusive or reinforcing? (INTERACTIVE PAPER)

Principal Topic - As argued by Acs and Phillips (2002) it is not only “the creation of wealth (entrepreneurship)” but also “the reconstitution of wealth (philanthropy)”, which has been essential for the inherent dynamism of the market economy (Ibid., p.201). However, we understand little about the entrepreneurship – philanthropy link in institutional contexts that differ from that of leading developed market economies. Accordingly our research agenda is to investigate the entrepreneurship-philanthropy nexus in a very different context of Lithuania, a country which shed a command economy system twenty years ago. In particular, we are interested to see if the cluster of attitudes and strategies of firms conducive to entrepreneurship, i.e. their entrepreneurial orientation (Covin & Slevin, 1989), is consistent or contradictory with philanthropy? In other words, is philanthropy strongly associated with some core components of entrepreneurship, or is it an entrepreneurial anomaly, relying on a minority of economic actors that provide important links with wider, non-economic communities. Method - The study draws on 270 randomly sampled, phone interviews with owners and ownermanagers of small and medium-sized enterprises (SMEs), i.e. firms with less than 250 employees. Interviews were conducted in Lithuania during January- March, 2008. Our results are based on confirmatory factor analysis combined with regression analysis. Results and Implications - Despite the legacy of informal institutions that is conducive neither to entrepreneurship nor to civic society, we found that by now, (i) the companies that score highest on entrepreneurial orientation construct, (ii) that perform best and those (iii) that have foreign owners are also most likely to declare their commitment to philanthropy. Our findings that most entrepreneurial firms are also involved in philanthropy are consistent with the perspective on the pattern of development in an entrepreneurial economy as outlined by Acs and Phillips (2002).

Precipitation studies on alloys from the system copper chromium zirconium

The precipitation reactions occurring in a series of copper-based alloys selected from the system copper-chromium-zirconium have been studied by resistometric and metallographic techniques. A survey of the factors influencing the development of copper-based alloys for high strength, high conductivity applications is followed by a more general review of contemporary materials, and illustrates that the most promising alloys are those containing chromium and zirconium. The few systematic attempts to study alloys from this system have been collated, discussed, and used as a basis for the selection of four alloy compositions viz:- Cu - 0.4% Cr Cu - 0.24. Zr Cu - 0. 3% Cr - 0.1% Zr Cu - 0.2% Cr - 0.2% Zr A description of the experimental techniques used to study the precipitation behaviour of these materials is preceeded by a discussion of the currently accepted theories relating to precipitate nucleation and growth. The experimental results are presented and discussed for each of the alloys independently, and are then treated jointly to obtain an overall assessment of the way in which the precipitation kinetics, metallography and mechanical properties vary with alloy composition and heat treatment. The metastable solid solution of copper-chromium is found to decompose by the rejection of chromium particles which maintain a coherent interface and a Kurdjumov-Sachs type crystallographic orientation relationship with the copper matrix. The addition of 0.1% zirconium to the alloy retards the rate of transformation by a factor of ten and modifies the dispersion characteristics of the precipitate without markedly altering the morphology. Further additions of zirconium lead to the growth of stacking faults during ageing, which provide favourable nucleation sites for the chromium precipitate. The partial dislocations bounding such stacking faults are also found to provide mobile heterogeneous nucleation sources for the precipitation reactions occurring in copper-zirconium.

SHG in a low-loss orientation patterned GaAs waveguide

We demonstrate second harmonic generation at 1621 nm in a low-loss orientation-patterned GaAs waveguide pumped by an optical parametric oscillator system. The losses were estimated to be 2.12 dB/cm.

A two-stage model of orientation integration for Battenberg-modulated micropatterns

The visual system pools information from local samples to calculate textural properties. We used a novel stimulus to investigate how signals are combined to improve estimates of global orientation. Stimuli were 29 × 29 element arrays of 4 c/deg log Gabors, spaced 1° apart. A proportion of these elements had a coherent orientation (horizontal/vertical) with the remainder assigned random orientations. The observer's task was to identify the global orientation. The spatial configuration of the signal was modulated by a checkerboard pattern of square checks containing potential signal elements. The other locations contained either randomly oriented elements (''noise check'') or were blank (''blank check''). The distribution of signal elements was manipulated by varying the size and location of the checks within a fixed-diameter stimulus. An ideal detector would only pool responses from potential signal elements. Humans did this for medium check sizes and for large check sizes when a signal was presented in the fovea. For small check sizes, however, the pooling occurred indiscriminately over relevant and irrelevant locations. For these check sizes, thresholds for the noise check and blank check conditions were similar, suggesting that the limiting noise is not induced by the response to the noise elements. The results are described by a model that filters the stimulus at the potential target orientations and then combines the signals over space in two stages. The first is a mandatory integration of local signals over a fixed area, limited by internal noise at each location. The second is a taskdependent combination of the outputs from the first stage. © 2014 ARVO.

Cognitive dissonance and the effect of acceptance of methodology, beliefs about religion, religious orientation, and dogmatism on the success of university students in a religious studies course

The problem investigated was negative effects on the ability of a university student to successfully complete a course in religious studies resulting from conflict between the methodologies and objectives of religious studies and the student's system of beliefs. Using Festinger's theory of cognitive dissonance as a theoretical framework, it was hypothesized that completing a course with a high level of success would be negatively affected by (1) failure to accept the methodologies and objectives of religious studies (methodology), (2) holding beliefs about religion that had potential conflicts with the methodologies and objectives (beliefs), (3) extrinsic religiousness, and (4) dogmatism. The causal comparative method was used. The independent variables were measured with four scales employing Likert-type items. An 8-item scale to measure acceptance of the methodologies and objectives of religious studies and a 16-item scale to measure holding of beliefs about religion having potential conflict with the methodologies were developed for this study. These scales together with a 20-item form of Rokeach's Dogmatism Scale and Feagin's 12-item Religious Orientation Scale to measure extrinsic religiousness were administered to 144 undergraduate students enrolled in randomly selected religious studies courses at Florida International University. Level of success was determined by course grade with the 27% of students receiving the highest grades classified as highly successful and the 27% receiving the lowest grades classified as not highly successful. A stepwise discriminant analysis produced a single significant function with methodology and dogmatism as the discriminants. Methodology was the principal discriminating variable. Beliefs and extrinsic religiousness failed to discriminate significantly. It was concluded that failing to accept the methodologies and objectives of religious studies and being highly dogmatic have significant negative effects on a student's success in a religious studies course. Recommendations were made for teaching to diminish these negative effects.

Environmental context of all samples from the Tara Oceans Expedition (2009-2013), about water column features

The Tara Oceans Expedition (2009-2013) sampled the world oceans on board a 36 m long schooner, collecting environmental data and organisms from viruses to planktonic metazoans for later analyses using modern sequencing and state-of-the-art imaging technologies. Tara Oceans Data are particularly suited to study the genetic, morphological and functional diversity of plankton. The present data set provides environmental context to all samples from the Tara Oceans Expedition (2009-2013), about water column features at the sampling location. Based on in situ measurements of... at the...

Les coalitions politiques et l'orientation du changement économique et politique aux États-Unis : la Grande Dépression et la Grande Récession comparées

Ce mémoire s’intéresse au concept de crise, économique et politique, comme source de changement idéologique et politique. Au travers de l’étude de l’austérité économique, il sera possible d’identifier des différences majeures entre deux épisodes de troubles économiques importants, la Grande Dépression et la Grande Récession. Alors que la Grande Dépression est caractérisée par une double crise, économique et politique, la Grande Récession, elle, demeure un choc essentiellement économique. L’absence de contagion dans le système politique explique la ténacité d’une idée comme l’austérité, de retour depuis la révolution néolibérale des années 80. L’austérité économique s’est adaptée et s’aligne maintenant aux intérêts d’une frange importante de la coalition démocrate. La persistance de l’allure des coalitions politiques depuis le dernier grand réalignement témoigne de l’absence de transformation majeure du mode d’action étatique, ce qui constitue une différence importante entre les deux crises.

Artificial neural network application in short-term prediction in an oscillating water column

Oscillating Water Column (OWC) is one type of promising wave energy devices due to its obvious advantage over many other wave energy converters: no moving component in sea water. Two types of OWCs (bottom-fixed and floating) have been widely investigated, and the bottom-fixed OWCs have been very successful in several practical applications. Recently, the proposal of massive wave energy production and the availability of wave energy have pushed OWC applications from near-shore to deeper water regions where floating OWCs are a better choice. For an OWC under sea waves, the air flow driving air turbine to generate electricity is a random process. In such a working condition, single design/operation point is nonexistent. To improve energy extraction, and to optimise the performance of the device, a system capable of controlling the air turbine rotation speed is desirable. To achieve that, this paper presents a short-term prediction of the random, process by an artificial neural network (ANN), which can provide near-future information for the control system. In this research, ANN is explored and tuned for a better prediction of the airflow (as well as the device motions for a wide application). It is found that, by carefully constructing ANN platform and optimizing the relevant parameters, ANN is capable of predicting the random process a few steps ahead of the real, time with a good accuracy. More importantly, the tuned ANN works for a large range of different types of random, process.

Performance study of the Galway Bay wave energy test site floating power system

The Galway Bay wave energy test site promises to be a vital resource for wave energy researchers and developers. As part of the development of this site, a floating power system is being developed to provide power and data acquisition capabilities, including its function as a local grid connection, allowing for the connection of up to three wave energy converter devices. This work shows results from scaled physical model testing and numerical modelling of the floating power system and an oscillating water column connected with an umbilical. Results from this study will be used to influence further scaled testing as well as the full scale design and build of the floating power system in Galway Bay.

Hydrodynamics of oscillating water column wave energy converters

This work deals with the numerical studies on hydrodynamics of oscillating water column (OWC) wave energy converters and its damping optimization on maximizing wave energy conversion by the OWC device. As a fundamental step, the hydrodynamic problems have been systematically studied by considering the interactions of the wave-structure and of the wave-internal water surface. Our first attention is on how the hydrodynamic performance can be reliably assessed, especially when it comes to the time-domain analysis, and what the physics behind the considerations is. Further on, a damping optimization for the OWC wave energy converter is also present based on the dynamics of the linear system, and a study on how we can optimize the damping for the given sea states so that the power conversion from irregular waves from irregular waves can be maximized.

Performance of a single liquid column damper for the control of dynamic responses of a tension leg platform

Tuned liquid column dampers have been proved to be successful in mitigating the dynamic responses of civil infrastructure. There have been some recent applications of this concept on wind turbines and this passive control system can help to mitigate responses of offshore floating platforms and wave devices. The control of dynamic responses of these devices is important for reducing loads on structural elements and facilitating operations and maintenance (O&M) activities. This paper outlines the use of a tuned single liquid column damper for the control of a tension leg platform supported wind turbine. Theoretical studies were carried out and a scaled model was tested in a wave basin to assess the performance of the damper. The tests on the model presented in this paper correspond to a platform with a very low natural frequency for surge, sway and yaw motions. For practical purposes, it was not possible to tune the liquid damper exactly to this frequency. The consequent approach taken and the efficiency of such approach are presented in this paper. Responses to waves of a single frequency are investigated along with responses obtained from wave spectra characterising typical sea states. The extent of control is quantified using peak and root mean squared dynamic responses respectively. The tests present some guidelines and challenges for testing scaled devices in relation to including response control mechanisms. Additionally, the results provide a basis for dictating future research on tuned liquid column damper based control on floating platforms.