Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs

The objective of this paper was to show the potential additional insight that result from adding greenhouse gas (GHG) emissions to plant performance evaluation criteria, such as effluent quality (EQI) and operational cost (OCI) indices, when evaluating (plant-wide) control/operational strategies in wastewater treatment plants (WWTPs). The proposed GHG evaluation is based on a set of comprehensive dynamic models that estimate the most significant potential on-site and off-site sources of CO2, CH4 and N2O. The study calculates and discusses the changes in EQI, OCI and the emission of GHGs as a consequence of varying the following four process variables: (i) the set point of aeration control in the activated sludge section; (ii) the removal efficiency of total suspended solids (TSS) in the primary clarifier; (iii) the temperature in the anaerobic digester; and (iv) the control of the flow of anaerobic digester supernatants coming from sludge treatment. Based upon the assumptions built into the model structures, simulation results highlight the potential undesirable effects of increased GHG production when carrying out local energy optimization of the aeration system in the activated sludge section and energy recovery from the AD. Although off-site CO2 emissions may decrease, the effect is counterbalanced by increased N2O emissions, especially since N2O has a 300-fold stronger greenhouse effect than CO2. The reported results emphasize the importance and usefulness of using multiple evaluation criteria to compare and evaluate (plant-wide) control strategies in a WWTP for more informed operational decision making

Economical and operational analysis of outsourced warehouse function

The target of the thesis was to find out has the decision to outsource part of Filtronic LK warehouse function been profitable. Furthermore, another thesis target was to demonstrate current logistics processes between TPLP and company and find out the targets for developing these processes. The decision to outsource part of logistical funtions have been profitable during the first business year. Partnership includes always business risks. Risk increases high asset specific investments. In the other hand investment to partnership increases mutual trust and commitment between parties. By developing partnership risks and opportunitic behaviour can be decreased. The potential of managing material and data flows between logistic service provider and company observed. By analyzing inventory effiency were highlighted the need for decreasing the capital invested to inventories. The recommendations for managing outsourced logistical funtions were established such as improving partnership, process development, performance measurement and invoice checking.

Feasibility study for acidic biorefinery concept

The integration a recovery process for spent sulfite liquor from a sulfite cooking process with a kraft pulp mill was studied in this thesis work. The process includes a fermentation process for the production of biofuel. The calculation for three cases was done. The three cases considered were with a spruce sulfite pulp production of 100, 250 and 1000 Adt/day corresponding to 10, 25 and 100% of the total pulp production. A kraft cooking process with prehydrolysis was taken in consideration as reference. Compared to kraft cooking with prehydrolysis a bigger amount of ethanol can be produced by sulfite cooking. In the kraft prehydrolysis case 40 t/day of ethanol and 1000 Adt/day pine pulp is produced and in the sulfite case the production is 113 t/day of ethanol and 1000 Adt/day of spruce pulp. The energy consumption in the sulfite process is assumed to be slightly higher than in the kraft prehydrolysis process. The recovery system for spent liquor mix was studied. The evaporation of the spent cooking liquors should be done separately. The approximately composition of melt was calculated. A comparison of all four cases was done and profitability was estimated.

Porvoon jalostamon haihtuvien orgaanisten yhdisteiden päästömääritysmenetelmät

Työssä käytiin läpi Porvoon jalostamon haihtuvien orgaanisten yhdisteiden päästömääritysmenetelmiä ja arvioitiin nykyisin käytössä olevien sekä uusien menetelmien soveltuvuutta Porvoon jalostamon päästömääritykseen. Nykyisten menetelmien arviointia tehtiin käymällä läpi eri alueiden 2000-luvun päästömäärät sekä vertaamalla päästömääriä muiden jalostamojen vastaaviin päästömääriin. Haihtuvista orgaanisista yhdisteistä puhuttaessa jätetään yleisesti metaani määritelmän ulkopuolelle ja käytetään termiä NMVOC-yhdisteet. Työssä laskettiin arvio Porvoon jalostamon metaanin päästömäärälle ja arvioitiin sen vaikutusta NMVOC-kokonaispäästömäärään. Metaanin kokonaispäästömäärien havaittiin olevan noin kymmenen kertaa haihtuvien orgaanisten yhdisteiden päästömääriä pienempiä, ja näin ollen niiden lisäämisellä NMVOC-päästöihin ei ole juuri vaikutusta. Myös menetelmien investointi- ja käyttökustannuksia, sekä pidemmän aikavälin kustannuksia arvioitiin. Kustannuksiltaan tällä hetkellä Porvoon jalostamolla käytössä olevat menetelmät ovat kustannustehokkaita. Uusista menetelmistä DIAL, SOF ja OGI ovat kustannuksiltaan huomattavasti kalliimpia, myös pitkän aikavälin vertailulla. Nykyisten menetelmien vuosittaiset kustannukset aiheutuvat mittausten vaatimista henkilötyötunneista. Uusista menetelmistä SOF ja DIAL vaativat ulkopuolisten mittaajien käyttämistä. Massavirran määrityksen suhteen vielä kehitysvaiheessa olevalla OGI-kameralla mitatessa voidaan käyttää mittaajina omaa henkilökuntaa. Toisin kuin DIAL- ja SOF-menetelmien laitteistot, OGI-kamera ostetaan omaksi ja näin ollen sitä voidaan käyttää tarpeen vaatiessa vuoden ympäri esimerkiksi suurien vuotajien paikallistamiseen ja LDAR-kiristysohjelman tukena. Tarkastelun perusteella olisi suositeltavaa tarkastaa nykyisin käytettävistä laskentamenetelmistä erityisesti prosessi- ja säiliöalueen sekä jätevesijärjestelmä päästömäärät käyttäen tarkempia DIAL-, SOF- tai myöhemmin OGI-menetelmiä ja muokata laskentamenetelmiä vastamaan näillä määritettyjä päästömääriä.

Nanosuodatuksen käyttö voimalaitoksen lisäveden valmistuksessa

Työssä selvitettiin nanosuodatuksen soveltuvuutta ja kannattavuutta voimalaitoksen lisäveden valmistuksessa. Kirjallisuusselvityksen ja nanosuodatuskokeiden tavoitteena oli arvioida nanosuodatukseen perustuvien lisäveden valmistusprosessien toiminnallista ja taloudellista kilpailukykyä perinteisiin prosesseihin verrattuna. Voimalaitoksen lisävedellä tarkoitetaan vesi-höyrykiertoon syötettävää vettä, joka korvaa kierrossa menetetyn veden. Nykyisin se valmistetaan vesijohto- tai pintavedestä käänteisosmoosiin ja ioninvaihtoon perustuvilla menetelmillä. Nanosuodatus on käänteisosmoosin tapaan kalvotekniikkaan perustuva erotusprosessi. Kaikki kalvot poistivat orgaanisen aineksen tehokkaasti (>90 %). Suolaretentioissa oli suuria eroja kalvojen välillä, vaikka kalvotoimittajien ilmoittamat retentiot olivat samaa tasoa. NF90-kalvo tuotti puhtainta permeaattia. Kahden kalvon (NF90 ja ESNA1-LF2) kohdalla havaittiin vuon alenemista, kun vuo oli kokeiden alussa noin 30 ja 40 L/m2/h. Likaantumisen merkkejä ei havaittu minkään kalvon kohdalla, kun vuoarvo oli maltillinen (n. 20 L/m2/h). Raakaveden vaikutus NF90-permeaatin laatuun oli vähäinen. Muilla kalvoilla raakaveden vaikutus permeaatin laatuun oli merkittävä. Investointi- ja käyttökustannusten perusteella nanosuodatukseen perustuvat lisäveden valmistusprosessit ovat kilpailukykyisiä nykyisiin lisäveden valmistusprosesseihin verrattuna. Pintavettä raakavetenä käyttävät nanosuodatusprosessit maksavat itsensä takaisin 3–5 vuodessa vesijohtovettä raakavetenä käyttävään käänteisosmoosiprosessiin verrattuna.

Feasibility study of the available relay protection solutions for microgrids

Thesis talks about relay protection for microgrids. Microgrid operation sets more challenges than traditional utility grid protection because of lower fault current levels. Solutions for these challenges are discussed in this paper. Thesis also studies available relay protection solutions and figures out how they would fit for microgrid protection.

Reforestation feasibility in area formerly used for cattle rasing in the state of Rondônia, Northwest Brazilian Amazon

Little knowledge on initial behavior of native tree species in recovering landscapes in the Amazon is a current concern for expanding reforestation in the region. Thus, the aim of this study was to evaluate the establishment of native tree species that could be used for reforestation in area previously covered by a pasture of brachiaria grass (Brachiaria brizantha) destined for intensive cattle rasing in the State of Rondônia. For this, there were performed previous diagnostic of landscape changes and the election of tree species based on the ecological group information. Some of the critical macronutrients for plant growth were supplied in the holes to alleviate nutrient deficiencies. In addition, growth and survival parameters were taken to evaluate the initial behavior of species. Six native tree species planted with different combinations (10mx10m, 5mx5m and 3mx3m) had survival rate and growth (total height, girth stem and crown projection area) measured in different intervals: 6-month, 12-month and 24-month after planting. All the species presented survival rate over 90% at 24 months and comparable growth indices to other native species under similar situation and in the region. Overall, Schizolobium amazonicum (bandarra), the non-identified legume tree 1 (acácia grande) and Colubrina glandulosa (sóbrasil) averaged over 90% the highest girth stem growth all over the area. S. amazonicum and the non-identified legume tree 1 (acácia grande) presented the best results for height and canopy area growth parameters, respectively. The combination among native tree species from initial successional ecological groups and fertilizer was favorable to promote reforestation in the conditions of the study area in Rondônia.

Military crisis management in the next decade (2020-2030) : inducing consent or relying on compliance?

The most outstanding conceptual challenge of modern crisis management is the principle of consent. It is not a problem only at the operational level - it challenges the entire decision-making structures of crisis management operations. In post-cold war times and especially in the 21st century, there has been a transition from peacekeeping with limited size and scope towards large and complex peace operations. This shift has presented peace operations with a dilemma. How to balance between maintaining consent for peace operations, whilst being able to use military force to coerce those attempting to wreck peace processes? To address such a dilemma, this research aims to promote understanding, on what can be achieved by military crisis management operations (peace support operations) in the next decade. The research concentrates on the focal research question: Should military components induce consent or rely on the compliance of conflicting parties in crisis management operations of the next decade (2020 – 2030)? The focus is on military – political strategic level considerations, and especially on the time before political decisions to commit to a crisis management operation. This study does not focus on which actor or organisation should intervene. The framework of this thesis derives from the so called ‘peacebuilding space’, the scope of peace operations and spoiler theory. Feasibility of both peace enforcement and peacekeeping in countering future risk conditions are analysed in this framework. This future-orientated qualitative research uses the Delphi-method with a panel of national and international experts. Citation analysis supports identification of relevant reference material, which consists of contemporary literature, the Delphi-questionnaires and interviews. The research process followed three main stages. In the first stage, plausible future scenarios and risk conditions were identified with the Delphi-panel. In the second stage, operating environments for peace support operations were described and consequent hypotheses formulated. In the third stage, these hypotheses were tested on the Delphi-panel. The Delphi-panel is sufficiently wide and diverse to produce plausible yet different insights. The research design utilised specifically military crisis management and peace operations theories. This produced various and relevant normative considerations. Therefore, one may argue that this research; which is based on accepted contemporary theory, hypotheses derived thereof and utilising an expert panel, contributes to the realm of peace support operations. This research finds that some degree of peace enforcement will be feasible and necessary in at least the following risk conditions: failed governance; potential spillover of ethnic, religious, ideological conflict; vulnerability of strategic chokepoints and infrastructures in ungoverned spaces; as well as in territorial and extra-territorial border disputes. In addition, some form of peace enforcement is probably necessary in risk conditions pertaining to: extremism of marginalised groups; potential disputes over previously uninhabited and resource-rich territories; and interstate rivalry. Furthermore, this research finds that peacekeeping measures will be feasible and necessary in at least risk conditions pertaining to: potential spillover of ethnic, religious, ideological conflict; uncontrolled migration; consequences from environmental catastrophes or changes; territorial and extra-territorial border disputes; and potential disputes over previously uninhabited and resource-rich territories. These findings are all subject to both generic and case specific preconditions that must exist for a peace support operation. Some deductions could be derived from the research findings. Although some risk conditions may appear illogical, understanding the underlying logic of a conflict is fundamental to understanding transition in crisis management. Practitioners of crisis management should possess cognizance of such transition. They must understand how transition should occur from threat to safety, from conflict to stability – and so forth. Understanding transition is imperative for managing the dynamic evolution of preconditions, which begins at the outset of a peace support operation. Furthermore, it is pertinent that spoilers are defined from a peace process point of view. If spoilers are defined otherwise, it changes the nature of an operation towards war, where the logic is breaking the will of an enemy - and surrender. In peace support operations, the logic is different: actions towards spoilers are intended to cause transition towards consent - not defeat. Notwithstanding future developments, history continues to provide strategic education. However, the distinction is that the risk conditions occur in novel futures. Hence, lessons learned from the past should be fitted to the case at hand. This research shows compelling evidence that swaying between intervention optimism and pessimism is not substantiated. Both peace enforcement and peacekeeping are sine qua non for successful military crisis management in the next decade.

Operational characteristics of four metering systems for agricultural fertilizers and amendments

The use of fertilizers and solid amendments in agriculture generates special interest for their effect on crop productivity, as well as for their environmental impact. The efficient use of these products demands knowing their physical and mechanical properties, the storing conditions effect and the operational characteristics of the metering systems used in the fertilizing equipment. In this context, the present study was developed with the purpose of evaluating the operational characteristics of different fertilizing metering systems and to determine the adequate metering system-product operational parameters, using powder lime, powder gypsum, granular 10-30-10 (N-P-K), and granular urea. Operational differences were established among four types of commercial fertilizer metering systems, including wire auger, star-shaped feed wheel, feed screw and ridged traction wheel. The study found that the unloading rate depends directly on the fertilizer metering system's rotating speed and is affected by particle size, repose angle, bulk density and moisture content of the applied product. The wire auger and star-shaped feed wheel metering systems were adequate for the distribution of powder products and the feed screw for granulated fertilizers. Furthermore, theoretical and experimental characteristic equations were established, defining curves for calibration and handling of the products plus the rotating speed range in which a better distributing behavior was achieved.

Operational performance of the mechanized and semi-mechanized potato harvest

Potato is an important crop plant throughout the world. Harvesting is a fundamental step in its production system. Maybe, it is the most complex and expensive operation. Thus, the objective of this work was to compare the cost of the mechanized and semi-mechanized harvest, the operational capacity and the production losses during the potato harvest process. The work was accomplished in a commercial farming, cultivated under pivot system, in the municipal district of Perdizes - MG, Brazil. A completely randomized design with two treatments was used: mechanized and semi-mechanized harvest. The mechanized harvest used a self-propelled harvester. In the semi-automated harvest, a digger mounted on tractor was used and the potato was manually harvested. It was concluded that the cost of mechanized harvest was 49.03% lower than the cost of semi-mechanized harvest. On average, the harvester had a work for 23 workers in manual harvest. Mechanized harvest showed losses of 2.35% of potato yield, while the semi-mechanized harvest showed losses of 6.32%.

Operational parameters of soybean seeding in santa fe system

The use of no tillage system associated with the crop-livestock integration is an alternate managing that promotes the accumulation of dry matter in the soil, an essential fact to make the system sustainable and profitable. The aim of this study was to evaluate the operational performance of a planter-tractor set on maize straws intercropped with Urochloa, in different seeding modes. The soybean crop was seed on the intercropping of two forage species (Urochloa brizantha and Urochloa ruziziensis) in five cropping systems: MBL (Maize with Urochloa in the maize seeding row, mixed with base fertilizer and deposited at 0.10 m), MBE (Maize with Urochloa seeded between rows at the same day of seeding maize), MBC (Urochloa between rows of maize seeded with the covering fertilizer at the V4 stage), MBLA (Maize with Urochloa by broadcast seeding at the V4 stage ) and MS (Single Maize: control). The following variables were evaluated: dry mass of maize straw, dry mass of forages and total dry mass of straw; and for the operational parameters the speed of seeding, wheel slippage, traction force and average power at the drawbar. The results showed that the amount of straw produced by maize intercropping with Urochloa, interferes in the operational performance of the tractor-planter at the operation of soybean seeding, i.e., areas with higher amount of straw promote greater energy demand, as well as higher wheel slippage.

Energy demand in citrus production under varied operational efficiency values

Citrus orchards are very important in Brazil, especially in São Paulo State, where occupy an area of 600,000 ha approximately. To identify sustainability degree of citrus production system, an energy analysis allows evaluating efficiency of direct and indirect applied inputs. Thus, this study aimed to evaluate citrus production system under energetic point of view, in which invested energy is paid back with citrus production; being compared within three scenarios for operational field efficiency. As result, by sensitivity analysis was determined that fuel was the main energy demander, followed by pesticides and fertilizers. In operational work capacity analysis, all combinations between efficiency (minimum, typical and maximum) and yield levels became positive in the seventh year, except for the combination minimum efficiency and 10 % less yield, positive in the eighth year. The best combination (maximum efficiency and 10 % more yield) has promoted investment payoff around the sixth and seventh year. By this study, it is possible to determine the total energy demand to produce citrus and indentify the applied inputs that need more attention by the decision-makers. Labor and seedlings can be ommited for further studies with citrus, since they were irrelevant. Management of agricultural machinery may pose an important role on decreasing environmental impact of citrus production.

Feasibility study of metal to polymer hybrid joining

The increasing demand for lightweight components has led to a huge exploitation of non-metallic materials such as polymers, fibers and elastomers in industrial and manufacturing processes. Recent trends towards cost effectiveness, weight reduction and production flexibility in industrial production and manufacturing processes has led to a growing interest in hybrid components where two or more dissimilar materials coexist to achieving specifically optimized characteristics. The importance of this research is to serve as a bridge to understanding the theories behind various joining techniques and the adaptation of the process for metal to polymer hybrid joints. Moreso, it helps companies to select the most productive and yet economical joining process for realization of lightweight metal to polymer hybrid components. This thesis is a literature review analyzing various materials that has been published on various joining methods for metal to polymer hybrid joints on the feasibility and eventual realization of the joint between these dissimilar materials. This study is aimed at theoretically evaluating the feasibility of joining processes between metal and plastic components by exploiting exhaustively joining and welding sources.

Techno-Economic Feasibility of Novel On-Line Condition Monitoring Methods in Low Voltage Distribution Networks

The focus in this thesis is to study both technical and economical possibilities of novel on-line condition monitoring techniques in underground low voltage distribution cable networks. This thesis consists of literature study about fault progression mechanisms in modern low voltage cables, laboratory measurements to determine the base and restrictions of novel on-line condition monitoring methods, and economic evaluation, based on fault statistics and information gathered from Finnish distribution system operators. This thesis is closely related to master’s thesis “Channel Estimation and On-line Diagnosis of LV Distribution Cabling”, which focuses more on the actual condition monitoring methods and signal theory behind them.

The effect of dynamic capabilities on operational-level innovation – Empirical study in magazine publishing industry

This master’s thesis aims to examine the relationship between dynamic capabilities and operational-level innovations. In addition, measures for the concept of dynamic capabilities are developed. The study was executed in the magazine publishing industry which is considered favourable for examining dynamic capabilities, since the sector is characterized by rapid change. As a basis for the study and the measure development, a literary review was conducted. Data for the empirical section was gathered by a survey targeted to chief-editors of Finnish consumer magazines. The relationship between dynamic capabilities and innovation was examined by multiple linear regression. The results indicate that dynamic capabilities have effect on the emergence of radical innovations. Environmental dynamism’s effect on radical innovations was not detected. Also, dynamic capabilities’ effect on innovation was not greater in turbulent operating environment.