Managing Customer Issues through a Support Channel Network

The importance of after-sales service or service in general can be seen and experienced by customers every day with industrial as well as other non-industrial services or products. This dissertation, drawing on theory and experience, focuses on practical engineering implications, specifically the management of customer issues in the after-sales phase in the mobile phone arena. The main objective of this doctoral dissertation is to investigate customer after-sales issue management, specifically regarding mobile phones. The case studies focus on issue resolution time and the issue of corrective actions. This dissertation consists of a main body and four peer-reviewed journal articles and one manuscript currently under review by a peer-reviewed journal. The main body of this dissertation examines the elements of customer satisfaction, loyalty, and retention with respect to corrective actions to address customer issues and issue resolution time through literature and empirical studies. The five independent works are case studies supporting the thesis research questions. This study examines four questions: 1) What are the factors affecting corrective actions for customers? 2) How can customer issue resolution time be controlled? 3) What are the factors affecting processes in the service chain? and 4) How can communication be measured in a service chain? In this work, both quantitative and qualitative analysis methods are used. The main body of the thesis reviews the literature regarding the elements that bridge the five case studies. The case studies of the articles and surveys lean more toward the methodology of critical positivism and then apply the interpretive approach in interpreting the results. The case study articles employ various statistical methods to analyze and to interpret the empirical and survey data. The statistical methods were used to create a model that is useful for significantly optimizing issue resolution time. Moreover, it was found that samples for verifying issues provided by the customer neither improve the perceived quality of corrective actions nor the perceived quality of issue resolution time. The term “service” in this work is limited to the technical services that are provided by product manufacturers and after-sales authorized service vendors. On the basis of this research work, it has been observed that corrective actions and issue resolution time are associated with customer satisfaction and hence, according to induction theory, to customer loyalty and retention. This thesis utilizes knowledge of marketing and customer relationships to contribute to the existing body of knowledge concerning information and communication technology for after-sales service recovery of mobile terminals. The established models in the thesis contribute to the existing knowledge of the after-sales process of dealing with customer issues in the field of mobile phones. The findings suggest that process managers could focus more on communication and training provided to the staff as new technology evolves rapidly. The study also suggest the managers formulate strategies for how customers can be kept informed on a regular basis of the status of issues that have been escalated for corrective action. The findings also lay the foundation for the comprehensive objective to control the entire product development process, starting with conceptualization. This implies that robust design should be applied to the new products so that problems affecting customer service quality are not repeated. The objective will be achieved when the entire service chain from product development to the final user can be modeled and this model can be used to support the organization at all levels.

Strategic planning of major disturbance proof network

In the 2000’s Finland suffered from storms that caused long outages in electricity distribution, longest up to two weeks. These major disturbances increased the importance of supply security. In 2013 new Electricity Market Act was announced. It defined maximum duration for outages, 6 h for city plan areas and 36 h for other areas. The aim for this work is to determine required major disturbance proof level for a study area and find tools for prioritizing overhead lines for cabling renovation to improve supply security. Three prioritization methods were chosen to be studied: A: prioritization line sections by customer outage costs they cause, B: maximizing customers major disturbance proof network and C: minimizing excavation costs in medium voltage network. Profitability calculations showed that prioritization method A was the most profitable and C had the weakest profitability. The prioritization method C drove renovation into unreasonable locations in the study area in reliability point of view. Therefore universal rule prioritization methods couldn’t be made from the prioritization methods. This led to the conclusion that every renewing area need to be evaluated in a case by case basis.

Distribution network design and optimization

The objective of this thesis is to examine distribution network designs and modeling practices and create a framework to identify best possible distribution network structure for the case company. The main research question therefore is: How to optimize case company’s distribution network in terms of customer needs and costs? Theory chapters introduce the basic building blocks of the distribution network design and needed calculation methods and models. Framework for the distribution network projects was created based on the theory and the case study was carried out by following the defined framework. Distribution network calculations were based on the company’s sales plan for the years 2014 - 2020. Main conclusions and recommendations were that the new Asian business strategy requires high investments in logistics and the first step is to open new satellite DC in China as soon as possible to support sales and second possible step is to open regional DC in Asia within 2 - 4 years.

Value of Information Logistics Integration in Digital Business Ecosystem

Digital business ecosystems (DBE) are becoming an increasingly popular concept for modelling and building distributed systems in heterogeneous, decentralized and open environments. Information- and communication technology (ICT) enabled business solutions have created an opportunity for automated business relations and transactions. The deployment of ICT in business-to-business (B2B) integration seeks to improve competitiveness by establishing real-time information and offering better information visibility to business ecosystem actors. The products, components and raw material flows in supply chains are traditionally studied in logistics research. In this study, we expand the research to cover the processes parallel to the service and information flows as information logistics integration. In this thesis, we show how better integration and automation of information flows enhance the speed of processes and, thus, provide cost savings and other benefits for organizations. Investments in DBE are intended to add value through business automation and are key decisions in building up information logistics integration. Business solutions that build on automation are important sources of value in networks that promote and support business relations and transactions. Value is created through improved productivity and effectiveness when new, more efficient collaboration methods are discovered and integrated into DBE. Organizations, business networks and collaborations, even with competitors, form DBE in which information logistics integration has a significant role as a value driver. However, traditional economic and computing theories do not focus on digital business ecosystems as a separate form of organization, and they do not provide conceptual frameworks that can be used to explore digital business ecosystems as value drivers—combined internal management and external coordination mechanisms for information logistics integration are not the current practice of a company’s strategic process. In this thesis, we have developed and tested a framework to explore the digital business ecosystems developed and a coordination model for digital business ecosystem integration; moreover, we have analysed the value of information logistics integration. The research is based on a case study and on mixed methods, in which we use the Delphi method and Internetbased tools for idea generation and development. We conducted many interviews with key experts, which we recoded, transcribed and coded to find success factors. Qualitative analyses were based on a Monte Carlo simulation, which sought cost savings, and Real Option Valuation, which sought an optimal investment program for the ecosystem level. This study provides valuable knowledge regarding information logistics integration by utilizing a suitable business process information model for collaboration. An information model is based on the business process scenarios and on detailed transactions for the mapping and automation of product, service and information flows. The research results illustrate the current cap of understanding information logistics integration in a digital business ecosystem. Based on success factors, we were able to illustrate how specific coordination mechanisms related to network management and orchestration could be designed. We also pointed out the potential of information logistics integration in value creation. With the help of global standardization experts, we utilized the design of the core information model for B2B integration. We built this quantitative analysis by using the Monte Carlo-based simulation model and the Real Option Value model. This research covers relevant new research disciplines, such as information logistics integration and digital business ecosystems, in which the current literature needs to be improved. This research was executed by high-level experts and managers responsible for global business network B2B integration. However, the research was dominated by one industry domain, and therefore a more comprehensive exploration should be undertaken to cover a larger population of business sectors. Based on this research, the new quantitative survey could provide new possibilities to examine information logistics integration in digital business ecosystems. The value activities indicate that further studies should continue, especially with regard to the collaboration issues on integration, focusing on a user-centric approach. We should better understand how real-time information supports customer value creation by imbedding the information into the lifetime value of products and services. The aim of this research was to build competitive advantage through B2B integration to support a real-time economy. For practitioners, this research created several tools and concepts to improve value activities, information logistics integration design and management and orchestration models. Based on the results, the companies were able to better understand the formulation of the digital business ecosystem and the importance of joint efforts in collaboration. However, the challenge of incorporating this new knowledge into strategic processes in a multi-stakeholder environment remains. This challenge has been noted, and new projects have been established in pursuit of a real-time economy.

Converter-Fed Induction Motor Losses: Determination With IEC Methods

Energy efficiency is an important topic when considering electric motor drives market. Although more efficient electric motor types are available, the induction motor remains as the most common industrial motor type. IEC methods for determining losses and efficiency of converter-fed induction motors were introduced recently with the release of technical specification IEC/TS 60034-2-3. Determining the induction motor losses with IEC/TS 60034-2-3 method 2-3-A and assessing the practical applicability of the method are the main interests of this study. The method 2-3-A introduces a specific test converter waveform to be used in the measurements. Differences between the induction motor losses with a test converter supply, and with a DTC converter supply are investigated. In the IEC methods, the tests are run at motor rated fundamental voltage, which, in practice, requires the frequency converter to be fed with a risen input voltage. In this study, the tests are run on both frequency converters with artificially risen converter input voltage, resulting in rated motor fundamental input voltage as required by IEC. For comparison, the tests are run with both converters on normal grid input voltage supply, which results in lower motor fundamental voltage and reduced flux level, but should be more relevant from practical point of view. According to IEC method 2-3-A, tests are run at rated motor load, and to ensure comparability of the results, the rated load is used in the grid-fed converter measurements, although motor is overloaded while producing the rated torque at reduced flux level. The IEC 2-3-A method requires also sinusoidal supply test results with IEC method 2-1-1B. Therefore, the induction motor losses with the recently updated IEC 60034-2-1 method 2-1-1B are determined at the motor rated voltage, but also at two lower motor voltages, which are according to the output fundamental voltages of the two network-supplied converters. The method 2-3-A was found to be complex to apply but the results were stable. According to the results, the method 2-3-A and the test converter supply are usable for comparing losses and efficiency of different induction motors at the operating point of rated voltage, rated frequency and rated load, but the measurements do not give any prediction of the motor losses at final application. One might therefore strongly criticize the method’s main principles. It seems, that the release of IEC 60034-2-3 as a technical specification instead of a final standard for now was justified, since the practical relevance of the main method is questionable.

Electrical Safety of Island Operated Low Voltage DC Network

Today, renewable energy technologies and modern power electronics have made it feasible to implement low voltage direct current (LVDC) microgrids (MGs) ca-pable to island operation. Such LVDC networks are particularly useful in remote areas. However, there are still pending issues in island operated LVDC MGs like electrical safety and controlled operation, which should be addressed before wide-scale implementation. This thesis is focused on the overall protection of an island operated LVDC network concept, including protection against electrical shocks, mains equipment protection and protection of photovoltaic (PV) power sources and battery energy storage systems (BESSs). The topic is approached through ex-amination of the safety hazards and the appropriate methods to protect against them, comprising considerations for earthing system selection and realisation of the protection system.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

Network Similarity Measures and Automatic Construction of Graph Models using Genetic Programming

A complex network is an abstract representation of an intricate system of interrelated elements where the patterns of connection hold significant meaning. One particular complex network is a social network whereby the vertices represent people and edges denote their daily interactions. Understanding social network dynamics can be vital to the mitigation of disease spread as these networks model the interactions, and thus avenues of spread, between individuals. To better understand complex networks, algorithms which generate graphs exhibiting observed properties of real-world networks, known as graph models, are often constructed. While various efforts to aid with the construction of graph models have been proposed using statistical and probabilistic methods, genetic programming (GP) has only recently been considered. However, determining that a graph model of a complex network accurately describes the target network(s) is not a trivial task as the graph models are often stochastic in nature and the notion of similarity is dependent upon the expected behavior of the network. This thesis examines a number of well-known network properties to determine which measures best allowed networks generated by different graph models, and thus the models themselves, to be distinguished. A proposed meta-analysis procedure was used to demonstrate how these network measures interact when used together as classifiers to determine network, and thus model, (dis)similarity. The analytical results form the basis of the fitness evaluation for a GP system used to automatically construct graph models for complex networks. The GP-based automatic inference system was used to reproduce existing, well-known graph models as well as a real-world network. Results indicated that the automatically inferred models exemplified functional similarity when compared to their respective target networks. This approach also showed promise when used to infer a model for a mammalian brain network.

Analyse d’implantation d’un système de gestion intégrée en environnement et en santé et sécurité du travail

Les systèmes de gestion intégrée en environnement et en santé et sécurité du travail (SGI) sont un nouveau paradigme de gestion dans les organisations modernes. Ces systèmes sont construits à partir des normes ISO 14001 et d’OHSAS 18001, basées sur la prévention des risques et le principe de précaution. La littérature sur les SGI témoigne d’un marasme conceptuel prédominant depuis plus de 10 ans; elle insiste sur l’urgence d’un consensus taxinomique et conceptuel afin de définir les systèmes de gestion intégrée et de différencier le mécanisme d’intégration de celui de l’implantation. Cette lacune conceptuelle enlise les connaissances dans un fossé épistémologique, retardant ainsi le débat dans ce nouveau champ d’études. Les rares connaissances dont nous disposons dans ce domaine proviennent de quelques études théoriques et de six études empiriques, toutes préoccupées par la compatibilité des multiples systèmes et des avantages économiques de leur intégration. Les évidences engendrées par ces études sont insuffisantes pour appréhender la dynamique du nouveau paradigme dont les effets demeurent peu connus. Cette situation révèle l’urgence d’agir dans un contexte où l’utilisation des SGI se multiplie, et où leur tendance à minimiser l’importance des risques devient de plus en plus préoccupante. Aucune étude ne s’est encore penchée sur l’implantation d’un SGI en environnement et en santé et sécurité du travail construit uniquement à partir des normes ISO 14001 et d’OHSAS 18001. Cette connaissance est importante pour expliquer les effets de tels systèmes. C’est dans cette perspective que nous avons réalisé cette première étude empirique d’un SGI selon les normes ISO 14001 et d’OHSAS 18001. Nos questions de recherche portent sur le mode, le degré d’implantation, les effets du SGI, ainsi que sur les facteurs contextuels qui interviennent pour expliquer les variations dans le degré d’implantation et les effets du SGI. Il s’agit d’une recherche à prélèvement qualitatif qui repose sur un devis d’étude de cas, avec des niveaux d’analyse imbriqués, et comportant une double visée descriptive et explicative. Notre échantillon, de type raisonné, regroupait trente-cinq intervenants provenant de différentes instances hiérarchiques ; il incluait également des représentants syndicaux. Notre échantillon était composé de 7 usines, accréditées aux normes ISO 14001, OHSAS 18001, et dispersées dans différentes villes du Québec. Ces usines différaient tant par leur technologie, leur âge, leur taille, et leurs types de production. Nos données ont été recueillies en 2004; elles sont basées sur des entrevues semi dirigées, sur des observations directes lors de la visite des lieux; elles s’appuient aussi sur des consultations de documents internes et sur des outils électroniques implantés. La transcription des entrevues effectuée, le contenu des discours a été catégorisé selon les cinq dimensions du SGI: engagement, planification, mise en opération, contrôle et revue de la direction. Une condensation horizontale avait précédé l’analyse de chaque cas et l’analyse transversale des cas selon une approche à la fois inductive et déductive. Les résultats de notre recherche ont révélé deux modes d’implantation : le mode d’enrichissement et le mode de fusion. Ces modes dépendaient de la nature des structures fonctionnelles en place. La visée d’amélioration continue à la base du SGI n’avait pas réussi à concilier les approches traditionnelles bottom up et top down qui ont dominé cette implantation; son mécanisme était guidé par 4 types de stratégies : l’économie des ressources, le contrôle des forces d’influences, la stratégie des fruits faciles à cueillir et la stratégie à petits pas. Pour analyser le degré d’implantation, nous avons tenu compte de l’effort de structuration du SGI et de la force d’utilisation des processus implantés à chacune des cinq dimensions du SGI. Les résultats de notre recherche révèlent une variabilité certaine du degré d’implantation entre les usines d’une part, et entre les processus associés aux cinq dimensions du SGI d’autre part. L’analyse des discours a permis de produire cinq hypothèses qui soutiennent l’effort de structuration et la force d’utilisation du SGI: (i) l’hypothèse de la force de cohésion, (ii) l’hypothèse de la spécificité du processus, (iii) l’hypothèse de la portée du processus, (iv) l’hypothèse de la capacité organisationnelle, (v) l’hypothèse de l’acceptation du changement. L’implantation du SGI était soumise à l’influence de multiples facteurs; ils étaient de nature politique, structurelle et organisationnelle. Ces facteurs avaient agi sur le processus d’implantation en amorçant une cascade d’interactions au cours desquelles leurs forces d’influences se renforçaient, se neutralisaient ou s’additionnaient pour affecter le degré d’implantation. Les facteurs facilitant touchaient surtout l’effort de structuration ; ils incluaient : l’expérience des systèmes de gestion, l’implication de la direction, celle du syndicat ou du CSS, la structure organisationnelle, le niveau d’éducation, l’âge et la taille de l’usine. Quant aux facteurs contraignants, ils agissaient sur la force d’utilisation ; ils incluaient : la lourdeur procédurale, le manque de temps, le manque de formation, le manque de ressources, la culture organisationnelle, la structure organisationnelle, le fossé intergénérationnel, l’absence du syndicat et l’âge de l’usine. Trois effets proximaux escomptés par l’entreprise ont été observés. (i) La rigueur de la gestion était associée à l’application des exigences du SGI; elle touchait la gouvernance en environnement et en santé et sécurité du travail, les mécanismes de gestion et les procédés de production. (ii) La standardisation était reliée au mode d’implantation du SGI; elle concernait les pratiques, les outils, les méthodes de travail et l’organisation des ressources. (iii) La rupture des silos est un effet relié au mode d’implantation du SGI; elle touchait les structures départementales, les frontières professionnelles, les relations et climat de travail. Ces effets proximaux avaient provoqué plusieurs effets émergents, plus distaux: une augmentation du pouvoir de contrôle syndical, un renforcement de la légitimité des recommandations soumises par les spécialistes professionnels, la création de réseaux inter organisationnels et le transfert du savoir. L’implantation du SGI avait transformé la gouvernance et les pratiques en environnement et en santé et sécurité du travail dans les sept usines. Toutefois, elle ne semblait pas garantir l’immunité du processus de gestion des risques à l’environnement ni à la santé et sécurité du travail. Sa capacité à diluer les risques devait retenir l’attention des politiques de santé publiques et des programmes de prévention des risques à l’environnement et à la santé et sécurité du travail. L’amélioration de la gestion des risques demeurait un effet attendu non observé et soumis à des facteurs contextuels qui pourraient l’empêcher de se concrétiser. À cet égard, le transfert du savoir, renforcé par l’émergence des réseaux inter organisationnels, semblait offrir une avenue beaucoup plus prometteuse et accessible. C’est l’une des contributions de cette recherche. Elle a aussi (i) proposé une typologie des modes d’implantation et des effets du SGI (ii) préconisé une méthode détaillée d’une meilleure appréciation du degré d’implantation (iii) précisé le rôle des facteurs contextuels dans l’explication des variations du degré d’implantation et dans la production des effets, (iv) proposé des hypothèses sur la structuration et l’utilisation du SGI (v) offert une perspective plurielle et approfondie de la dynamique de l’implantation du SGI grâce à la variété de l’échantillon des répondants et des usines. Il s’agit de la première étude de terrain dans le domaine. À notre connaissance, aucune autre étude n’a eu de tels résultats. Mots Clés : ISO 14001, OHSAS 18001, gestion intégrée, environnement, santé et sécurité du travail, risques environnementaux, risques en santé et sécurité du travail, analyse d’implantation, degré d’implantation, SGI, transfert du savoir.

Potential of built environment interventions involving deployment of public bicycles to increase utilitarian cycling : the case of BIXI in Montreal, Quebec

Contexte : Les interventions sur l'environnement bâti reliées au transport peuvent contribuer à l'augmentation de la pratique de l'activité physique. En tant qu’intervention, les programmes de vélos en libre-service (PVLS) peuvent contribuer à l’utilisation du vélo. BIXI© (nom qui fusionne les mots BIcyclette et taXI) est un programme de vélos en libre-service implanté à Montréal, au Canada, en mai 2009. Le programme BIXI© met à la disposition des gens 5050 vélos à 405 bornes d’ancrage. Objectif : L'objectif général de cette thèse est d'étudier l'impact d'un programme de vélos en libre-service sur l’utilisation du vélo. Les objectifs spécifiques de la thèse sont de : 1) Estimer la prévalence populationnelle et identifier des variables environnementales, sociodémographiques et comportementales associées à l’utilisation des vélos en libre-service. 2) Estimer l’impact populationnel de l’implantation des vélos en libre-service sur l’utilisation du vélo et les contributions respectives de l’utilisation du vélo pour des fins utilitaires et récréatives à l’utilisation totale du vélo. 3) Estimer l’impact local de l’implantation des vélos en libre-service sur l’utilisation du vélo. Méthodes : Un devis populationnel transversal avec mesures répétées. Des enquêtes ont été réalisées au moment du lancement du programme de vélos en libre-service (4 mai au 10 juin, 2009), à la fin de la première année d’implantation (8 octobre au 12 décembre, 2009), et à la fin de la deuxième année d’implantation (8 novembre au 12 décembre, 2010). Les échantillons se composaient de 2001 (âge moyen = 49,4 années, 56,7 % de femmes), 2502 (âge moyen = 47,8 ans, 61,8 % de femmes) et 2509 (âge moyen = 48,9 années, 59,0 % de femmes) adultes à chaque période de mesure respectivement. Résultats : Globalement, les résultats démontrent le potentiel des PVLS pour augmenter l’utilisation du vélo. Les résultats suggèrent que près de 128 744 habitants ou 8,1 % de la population adulte ont utilisé les vélos BIXI© au moins une fois dans la première saison. Après deux ans d’implantation, ceux qui sont exposés à BIXI© dans leur milieu résidentiel avaient une probabilité significativement plus élevée d’utiliser le vélo par rapport à ceux non exposés. Par contre, il n'y avait aucun impact local de l’implantation du programme BIXI© sur l’utilisation du vélo. Conclusions : L’implantation d'un PVLS à Montréal a augmenté la probabilité d’utiliser le vélo chez les individus habitant près d'une borne d'ancrage. Mots clés : programme de vélos en libre-service, expérience naturelle, santé des populations.

Clustering algorithms and shape factor methods to discriminate among small GTPase phenotypes using DIC image analysis.

Naïvement perçu, le processus d’évolution est une succession d’événements de duplication et de mutations graduelles dans le génome qui mènent à des changements dans les fonctions et les interactions du protéome. La famille des hydrolases de guanosine triphosphate (GTPases) similaire à Ras constitue un bon modèle de travail afin de comprendre ce phénomène fondamental, car cette famille de protéines contient un nombre limité d’éléments qui diffèrent en fonctionnalité et en interactions. Globalement, nous désirons comprendre comment les mutations singulières au niveau des GTPases affectent la morphologie des cellules ainsi que leur degré d’impact sur les populations asynchrones. Mon travail de maîtrise vise à classifier de manière significative différents phénotypes de la levure Saccaromyces cerevisiae via l’analyse de plusieurs critères morphologiques de souches exprimant des GTPases mutées et natives. Notre approche à base de microscopie et d’analyses bioinformatique des images DIC (microscopie d’interférence différentielle de contraste) permet de distinguer les phénotypes propres aux cellules natives et aux mutants. L’emploi de cette méthode a permis une détection automatisée et une caractérisation des phénotypes mutants associés à la sur-expression de GTPases constitutivement actives. Les mutants de GTPases constitutivement actifs Cdc42 Q61L, Rho5 Q91H, Ras1 Q68L et Rsr1 G12V ont été analysés avec succès. En effet, l’implémentation de différents algorithmes de partitionnement, permet d’analyser des données qui combinent les mesures morphologiques de population native et mutantes. Nos résultats démontrent que l’algorithme Fuzzy C-Means performe un partitionnement efficace des cellules natives ou mutantes, où les différents types de cellules sont classifiés en fonction de plusieurs facteurs de formes cellulaires obtenus à partir des images DIC. Cette analyse démontre que les mutations Cdc42 Q61L, Rho5 Q91H, Ras1 Q68L et Rsr1 G12V induisent respectivement des phénotypes amorphe, allongé, rond et large qui sont représentés par des vecteurs de facteurs de forme distincts. Ces distinctions sont observées avec différentes proportions (morphologie mutante / morphologie native) dans les populations de mutants. Le développement de nouvelles méthodes automatisées d’analyse morphologique des cellules natives et mutantes s’avère extrêmement utile pour l’étude de la famille des GTPases ainsi que des résidus spécifiques qui dictent leurs fonctions et réseau d’interaction. Nous pouvons maintenant envisager de produire des mutants de GTPases qui inversent leur fonction en ciblant des résidus divergents. La substitution fonctionnelle est ensuite détectée au niveau morphologique grâce à notre nouvelle stratégie quantitative. Ce type d’analyse peut également être transposé à d’autres familles de protéines et contribuer de manière significative au domaine de la biologie évolutive.

Semi-algebraic methods for symbolic analysis of complex reaction networks

The identification of chemical mechanism that can exhibit oscillatory phenomena in reaction networks are currently of intense interest. In particular, the parametric question of the existence of Hopf bifurcations has gained increasing popularity due to its relation to the oscillatory behavior around the fixed points. However, the detection of oscillations in high-dimensional systems and systems with constraints by the available symbolic methods has proven to be difficult. The development of new efficient methods are therefore required to tackle the complexity caused by the high-dimensionality and non-linearity of these systems. In this thesis, we mainly present efficient algorithmic methods to detect Hopf bifurcation fixed points in (bio)-chemical reaction networks with symbolic rate constants, thereby yielding information about their oscillatory behavior of the networks. The methods use the representations of the systems on convex coordinates that arise from stoichiometric network analysis. One of the methods called HoCoQ reduces the problem of determining the existence of Hopf bifurcation fixed points to a first-order formula over the ordered field of the reals that can then be solved using computational-logic packages. The second method called HoCaT uses ideas from tropical geometry to formulate a more efficient method that is incomplete in theory but worked very well for the attempted high-dimensional models involving more than 20 chemical species. The instability of reaction networks may lead to the oscillatory behaviour. Therefore, we investigate some criterions for their stability using convex coordinates and quantifier elimination techniques. We also study Muldowney's extension of the classical Bendixson-Dulac criterion for excluding periodic orbits to higher dimensions for polynomial vector fields and we discuss the use of simple conservation constraints and the use of parametric constraints for describing simple convex polytopes on which periodic orbits can be excluded by Muldowney's criteria. All developed algorithms have been integrated into a common software framework called PoCaB (platform to explore bio- chemical reaction networks by algebraic methods) allowing for automated computation workflows from the problem descriptions. PoCaB also contains a database for the algebraic entities computed from the models of chemical reaction networks.

Methods of generating carrier-envelope-phase stabilized, intense, few-cycle laser pulses

Ultrafast laser pulses have become an integral part of the toolbox of countless laboratories doing physics, chemistry, and biological research. The work presented here is motivated by a section in the ever-growing, interdisciplinary research towards understanding the fundamental workings of light-matter interactions. Specifically, attosecond pulses can be useful tools to obtain the desired insight. However access to, and the utility of, such pulses is dependent on the generation of intense, few-cycle, carrier-envelope-phase stabilized laser pulses. The presented work can be thought of as a sort of roadmap towards the latter. From the oscillator which provides the broadband seed to amplification methods, the integral pieces necessary for the generation of attosecond pulses are discussed. A range of topics from the fundamentals to design challenges is presented, outfitting the way towards the practical implementation of an intense few-cycle carrier-envelope-phase stabilized laser source.

An ATM distributed simulator for network management research

Due to the high cost of a large ATM network working up to full strength to apply our ideas about network management, i.e., dynamic virtual path (VP) management and fault restoration, we developed a distributed simulation platform for performing our experiments. This platform also had to be capable of other sorts of tests, such as connection admission control (CAC) algorithms, routing algorithms, and accounting and charging methods. The platform was posed as a very simple, event-oriented and scalable simulation. The main goal was the simulation of a working ATM backbone network with a potentially large number of nodes (hundreds). As research into control algorithms and low-level, or rather cell-level methods, was beyond the scope of this study, the simulation took place at a connection level, i.e., there was no real traffic of cells. The simulated network behaved like a real network accepting and rejecting SNMP ones, or experimental tools using the API node

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification