Municipal sludge management : planning and policy options /

"Printed: November 1987."

Planning guidance: guidance for municipal ESDA's.

"May 1995."

Independence Avenue, Constitution Avenue : special street plans, phase 1 study : National Capital Planning Commission urban design study, December 1980 /

Item 831-A.

Education and Development : A spatial-econometric approach on spatial change and permanence in southern Brazil

The Brazilian state of Paraná exhibits a violent geography of inequality and duality, hosting both the most developed city in the country, internationally recognized by its urban and environmental innovations, and southern Brazil’s most concentrated cluster of poverty and underdevelopment. Over the course of the past decades, the state underwent a major economic transformation, modernizing and increasing its industrial structure and shifting to the service sector with a larger participation of the knowledge economy. This study is concerned on the interplay between formal education and socioeconomic development during this process, and above all its spatial character. It attempts make sense of the rich literature on education and growth and/or development, discussing it through the lenses of human geography and planning. In order for the analysis to be possible, this study created a consistent database of municipal scores of education over the course of 40 years, dealing with changing census methodologies and municipal boundaries. Making use of modern exploratory spatial data analysis combined with spatial regressions, the study identifies a clustered, time-persistent interplay between education and development that is stronger for low and basic levels of education. Moreover, it provides evidence that not only education is a predictor of future development, but also that analyses of this kind must take into consideration spatial autocorrelation in order to be accurate.

A way forward for land-use planning to achieve policy goals by using spatial modelling scenarios

This paper investigates how demographic (socioeconomic) and land-use (physical and environmental) data can be integrated within a decision support framework to formulate and evaluate land-use planning scenarios. A case-study approach is undertaken with land-use planning scenarios for a rapidly growing coastal area in Australia, the Shire of Hervey Bay. The town and surrounding area require careful planning of the future urban growth between competing land uses. Three potential urban growth scenarios are put forth to address this issue. Scenario A ('continued growth') is based on existing socioeconomic trends. Scenario B ('maximising rates base') is derived using optimisation modelling of land-valuation data. Scenario C ('sustainable development') is derived using a number of social, economic, and environmental factors and assigning weightings of importance to each factor using a multiple criteria analysis approach. The land-use planning scenarios are presented through the use of maps and tables within a geographical information system, which delineate future possible land-use allocations up until 2021. The planning scenarios are evaluated by using a goal-achievement matrix approach. The matrix is constructed with a number of criteria derived from key policy objectives outlined in the regional growth management framework and town planning schemes. The authors of this paper examine the final efficiency scores calculated for each of the three planning scenarios and discuss the advantages and disadvantages of the three land-use modelling approaches used to formulate the final scenarios.

Tradeoffs of different types of species occurrence data for use in systematic conservation planning

Data on the occurrence of species are widely used to inform the design of reserve networks. These data contain commission errors (when a species is mistakenly thought to be present) and omission errors (when a species is mistakenly thought to be absent), and the rates of the two types of error are inversely related. Point locality data can minimize commission errors, but those obtained from museum collections are generally sparse, suffer from substantial spatial bias and contain large omission errors. Geographic ranges generate large commission errors because they assume homogenous species distributions. Predicted distribution data make explicit inferences on species occurrence and their commission and omission errors depend on model structure, on the omission of variables that determine species distribution and on data resolution. Omission errors lead to identifying networks of areas for conservation action that are smaller than required and centred on known species occurrences, thus affecting the comprehensiveness, representativeness and efficiency of selected areas. Commission errors lead to selecting areas not relevant to conservation, thus affecting the representativeness and adequacy of reserve networks. Conservation plans should include an estimation of commission and omission errors in underlying species data and explicitly use this information to influence conservation planning outcomes.

Sustainable tourism planning: A content analysis of local tourism plans

Tourism planning has been advocated by many as a possible means of alleviating some of the negative impacts of tourism. While a number of approaches have evolved, tourism planning based on the philosophies of sustainability has emerged as the most comprehensive approaches. To investigate the tourism planning approaches of local tourism destinations in Queensland, particularly the extent to which tourism plans exhibit the sustainable approach to tourism planning, 30 local tourism planning documents have been reviewed. Despite claims that sustainable tourism planning is one of the most accepted approaches the study has shown that this is not necessarily the case in practice. It was found that although a number of plans addressed the issue of sustainability, the subsequent strategies and actions suggest that the sustainable approach is not the dominant planning approach, but in fact the economic and infrastructure approaches are the primary planning methods.

Spatial-temporal mining of archived automatic vehicle location (AVL) data for transit service planning applications

An Automatic Vehicle Location (AVL) system is a computer-based vehicle tracking system that is capable of determining a vehicle's location in real time. As a major technology of the Advanced Public Transportation System (APTS), AVL systems have been widely deployed by transit agencies for purposes such as real-time operation monitoring, computer-aided dispatching, and arrival time prediction. AVL systems make a large amount of transit performance data available that are valuable for transit performance management and planning purposes. However, the difficulties of extracting useful information from the huge spatial-temporal database have hindered off-line applications of the AVL data. ^ In this study, a data mining process, including data integration, cluster analysis, and multiple regression, is proposed. The AVL-generated data are first integrated into a Geographic Information System (GIS) platform. The model-based cluster method is employed to investigate the spatial and temporal patterns of transit travel speeds, which may be easily translated into travel time. The transit speed variations along the route segments are identified. Transit service periods such as morning peak, mid-day, afternoon peak, and evening periods are determined based on analyses of transit travel speed variations for different times of day. The seasonal patterns of transit performance are investigated by using the analysis of variance (ANOVA). Travel speed models based on the clustered time-of-day intervals are developed using important factors identified as having significant effects on speed for different time-of-day periods. ^ It has been found that transit performance varied from different seasons and different time-of-day periods. The geographic location of a transit route segment also plays a role in the variation of the transit performance. The results of this research indicate that advanced data mining techniques have good potential in providing automated techniques of assisting transit agencies in service planning, scheduling, and operations control. ^

Improving Analytical Travel Time Estimation for Transportation Planning Models

This dissertation aimed to improve travel time estimation for the purpose of transportation planning by developing a travel time estimation method that incorporates the effects of signal timing plans, which were difficult to consider in planning models. For this purpose, an analytical model has been developed. The model parameters were calibrated based on data from CORSIM microscopic simulation, with signal timing plans optimized using the TRANSYT-7F software. Independent variables in the model are link length, free-flow speed, and traffic volumes from the competing turning movements. The developed model has three advantages compared to traditional link-based or node-based models. First, the model considers the influence of signal timing plans for a variety of traffic volume combinations without requiring signal timing information as input. Second, the model describes the non-uniform spatial distribution of delay along a link, this being able to estimate the impacts of queues at different upstream locations of an intersection and attribute delays to a subject link and upstream link. Third, the model shows promise of improving the accuracy of travel time prediction. The mean absolute percentage error (MAPE) of the model is 13% for a set of field data from Minnesota Department of Transportation (MDOT); this is close to the MAPE of uniform delay in the HCM 2000 method (11%). The HCM is the industrial accepted analytical model in the existing literature, but it requires signal timing information as input for calculating delays. The developed model also outperforms the HCM 2000 method for a set of Miami-Dade County data that represent congested traffic conditions, with a MAPE of 29%, compared to 31% of the HCM 2000 method. The advantages of the proposed model make it feasible for application to a large network without the burden of signal timing input, while improving the accuracy of travel time estimation. An assignment model with the developed travel time estimation method has been implemented in a South Florida planning model, which improved assignment results.

Housing and Planning in London under the Conservative Government: Spatial impacts, social polarisation, sustainable development and social justice

This paper will be based on my continuing research on planning and housing development in London. It will focus on the proposals in the Government’s Housing and Planning Bill, which are likely to be enacted in Spring 2016. It will review the evidence of potential spatial impacts in terms of the supply of existing affordable homes and the location and affordability of new supply. This will be related to a review of the alternative development options for London’s growth in the context of the Mayor of London’s draft 2050 Infrastructure Plan. The paper will analyse the potential impact of new Government policy and legislation on whether London’s housing requirements can be delivered in accordance with the objectives of sustainable planning and social justice, and will also consider the constraints on the ability of the new Mayor of London, to be elected in May 2016 to achieve manifesto commitments.

How coastal strategic planning reflects interrelationships between ecosystem services: a four-step method

Explicit and integrated inclusion of ecosystem services (ESs) and their interrelationships can improve the quality of strategic plans and decision-making processes. However, there is little systematic analysis of how ES interrelationships are framed in policy language, particularly in coastal planning discourse. The objective of this paper is therefore to present a four-step method, based on content analysis, to assess ES interrelationships in coastal strategic planning documents. The method consists of: 1) selecting strategic plans; 2) identifying ESs; 3) identifying drivers, ESs and their effects; and 4) constructing relational diagrams. The four-step method is applied to a case of Jiaozhou Bay in China, demonstrating its capacity of identifying which drivers and ES trade-offs and synergies are formulated in coastal strategic plans. The method is helpful to identify overlooked ES interrelationships, inform temporal and spatial issues, and assess the continuity of plans' attention to interrelationships. The main methodological contributions are discussed by emphasizing its broad scope of drivers and ESs and an explicit distinction among the cause of relationships. The developed method also has the potential of cross-fertilizing other kinds of approaches and facilitating practical planning processes.

Propuesta sostenible para mitigar los efectos climáticos adversos en una ciudad costera de Argentina

Los indicadores de sostenibilidad climática constituyen herramientas fundamentales para complementar las políticas de ordenamiento del territorio urbano y pueden beneficiar la calidad de vida sus habitantes. En el presente trabajo se diseñó un indicador climático urbano para la ciudad de Bahía Blanca considerando variables meteorológicas y análisis de la percepción social. El mismo permitió delimitar la ciudad en cuatro regiones bien diferenciadas entre sí. A partir de entonces, se realizó una propuesta sostenible para mitigar los efectos adversos del clima a partir de la aplicación del método DPSIR. Las mismas estuvieron destinadas a mejorar las condiciones de vida de la población. Los resultados permitieron considerar que una pronta implementación de la misma junto con una activa participación de los actores sociales y los tomadores de decisiones es necesaria para mejorar las condiciones actuales en la que se encuentra la ciudad. Con las medidas propuestas, la población local sabrá cómo actuar ante la ocurrencia de distintos eventos extremos, eventos de desconfort climático, etc. Al ser un método sencillo, la metodología aplicada en este estudio puede replicarse en otras ciudades del mundo con el objetivo de mejorar la calidad de vida de los habitantes.

Spatial Data Systems for Transportation Planning, 1997

The objective of this research was to develop a methodology for transforming and dynamically segmenting data. Dynamic segmentation enables transportation system attributes and associated data to be stored in separate tables and merged when a specific query requires a particular set of data to be considered. A major benefit of dynamic segmentation is that individual tables can be more easily updated when attributes, performance characteristics, or usage patterns change over time. Applications of a progressive geographic database referencing system in transportation planning are vast. Summaries of system condition and performance can be made, and analyses of specific portions of a road system are facilitated.

Residential planning, driver mobility and CO2 emission

The literature on residences and citizens’ transports has focused on either reforming traffic managing in response to residential relocation or post-evaluation of urban planning policies or the evolution of the urban spatial form. In a city there are hotspots that attract the citizens and most of the transportation in the city arises as the citizens’ movement between their residence and the hotspots. Little scholarly attention has been devoted to the possibility to minimize citizens’ transportation in the city by the urban planning of residential areas. In this paper we propose a method to evaluate the environmental impact (in terms of CO2-emissions) of urban plans of residential areas. The method is illustrated in a Swedish case of a midsize city which is presently preoccupied with urban planning of new residential areas in response to substantial population growth due to immigration. The residential plans aims to increase the compactness and residential density in the current center and sub centers leads to less CO2 emissions compare to urban expansion to the edge of the city. The plans of concentrated apartment buildings are more effective in meeting residential needs and mitigating CO2 emissions than dispersed single-family houses.