Demonstrating the effects of multi-path propagation and advantages of diversity antenna techniques

In this paper, experimental investigations are performed into assessing the quality of communication link between Bluetooth devices in an indoor environment, as an initial step of demonstrating benefits of diversity and smart antenna techniques in mobile computing.

Gain switched multi-carrier transmitter and pilot tone based receiver for long reach access networks

A novel and cost effective long reach PON downlink scenario is proposed employing a multi-carrier transmitter and pilot tone aided direct detection at the receiver. Error free performance with QPSK and 50km transmission is presented. © 2012 OSA.

Evaluation of wind-induced internal pressure in low-rise buildings: A multi scale experimental and numerical approach

Hurricane is one of the most destructive and costly natural hazard to the built environment and its impact on low-rise buildings, particularity, is beyond acceptable. The major objective of this research was to perform a parametric evaluation of internal pressure (IP) for wind-resistant design of low-rise buildings and wind-driven natural ventilation applications. For this purpose, a multi-scale experimental, i.e. full-scale at Wall of Wind (WoW) and small-scale at Boundary Layer Wind Tunnel (BLWT), and a Computational Fluid Dynamics (CFD) approach was adopted. This provided new capability to assess wind pressures realistically on internal volumes ranging from small spaces formed between roof tiles and its deck to attic to room partitions. Effects of sudden breaching, existing dominant openings on building envelopes as well as compartmentalization of building interior on the IP were systematically investigated. Results of this research indicated: (i) for sudden breaching of dominant openings, the transient overshooting response was lower than the subsequent steady state peak IP and internal volume correction for low-wind-speed testing facilities was necessary. For example a building without volume correction experienced a response four times faster and exhibited 30–40% lower mean and peak IP; (ii) for existing openings, vent openings uniformly distributed along the roof alleviated, whereas one sided openings aggravated the IP; (iii) larger dominant openings exhibited a higher IP on the building envelope, and an off-center opening on the wall exhibited (30–40%) higher IP than center located openings; (iv) compartmentalization amplified the intensity of IP and; (v) significant underneath pressure was measured for field tiles, warranting its consideration during net pressure evaluations. The study aimed at wind driven natural ventilation indicated: (i) the IP due to cross ventilation was 1.5 to 2.5 times higher for Ainlet/Aoutlet>1 compared to cases where Ainlet/Aoutlet<1, this in effect reduced the mixing of air inside the building and hence the ventilation effectiveness; (ii) the presence of multi-room partitioning increased the pressure differential and consequently the air exchange rate. Overall good agreement was found between the observed large-scale, small-scale and CFD based IP responses. Comparisons with ASCE 7-10 consistently demonstrated that the code underestimated peak positive and suction IP.

A Customer's Expectation and Perception of Hotel Service Quality in Cyprus

In recent years, hotels in Cyprus have encountered difficult economic times due to increasing customer demands and strong internal industry development competition. The hospitality industry’s main concern globally is to serve its customer S needs and desires, most of which are addressed through personal services. Hence, the hotel businesses that are able to provide quality services to its ever-demanding customers in a warm and efficient manner are those businesses which will be more likely to obtain a long term competitive advantage over their rivals. Ironically, the quality of services frequently cannot fully appreciated until something goes wrong, and then, the poor quality of services can have long lasting lingering effects on the customer base and, hence, often is translated into a loss of business. Nevertheless, since the issue of delivery of hospitality services always involves people, this issue must center around the management of the human resource factor, and in particular, on the way which interacts with itself and with guests, as service encounters. In the eyes of guests, hospitality businesses will be viewed successful or failure, depending on [he cumulative impact of the service encounters they have experienced on a personal level. Finally, since hotels are offering intangible and perishable personal service encounters, managing these services must be a paramount concern of any hotel business. As a preliminary exercise, visualize when you have last visited a hotel, or a restaurant, and then, ask yourself these questions: What did you feel about the quality of the experience? Was it a memorable one, which you would recommend it to others, or there were certain things, which could have made the difference? Thus, the way personalized services are provided can make the deference in attracting arid retaining long-term customers

Tool cutting force modeling and wear estimation of micro -end-milling operations

The applications of micro-end-milling operations have increased recently. A Micro-End-Milling Operation Guide and Research Tool (MOGART) package has been developed for the study and monitoring of micro-end-milling operations. It includes an analytical cutting force model, neural network based data mapping and forecasting processes, and genetic algorithms based optimization routines. MOGART uses neural networks to estimate tool machinability and forecast tool wear from the experimental cutting force data, and genetic algorithms with the analytical model to monitor tool wear, breakage, run-out, cutting conditions from the cutting force profiles. ^ The performance of MOGART has been tested on the experimental data of over 800 experimental cases and very good agreement has been observed between the theoretical and experimental results. The MOGART package has been applied to the micro-end-milling operation study of Engineering Prototype Center of Radio Technology Division of Motorola Inc. ^

A comparison of the Kodaly method and the traditional method to determine pitch accuracy in grade 6 choral sight-singing

The purpose of this study was to determine which of the two methods is more appropriate to teach pitch discrimination to Grade 6 choral students to improve sight-singing note accuracy. This study consisted of three phases: pre-testing, instruction and post-testing. During the four week study, the experimental group received training using the Kodaly method while the control group received training using the traditional method. The pre and post tests were evaluated by three trained musicians. The analysis of the data utilized an independent t-test and a paired t-test with the methods of teaching (experimental and control) as a factor. Quantitative results suggest that the experimental subjects, those receiving Kodaly instruction at post-treatment showed a significant improvement in the pitch accuracy than the control group. The specific change resulted in the Kodaly method to be more effective in producing accurate pitch in sight-singing.

Tool cutting force modeling and wear estimation of micro-end-milling operations

The applications of micro-end-milling operations have increased recently. A Micro-End-Milling Operation Guide and Research Tool (MOGART) package has been developed for the study and monitoring of micro-end-milling operations. It includes an analytical cutting force model, neural network based data mapping and forecasting processes, and genetic algorithms based optimization routines. MOGART uses neural networks to estimate tool machinability and forecast tool wear from the experimental cutting force data, and genetic algorithms with the analytical model to monitor tool wear, breakage, run-out, cutting conditions from the cutting force profiles. The performance of MOGART has been tested on the experimental data of over 800 experimental cases and very good agreement has been observed between the theoretical and experimental results. The MOGART package has been applied to the micro-end-milling operation study of Engineering Prototype Center of Radio Technology Division of Motorola Inc.