Tiro de Artilharia vs. Tiro de Morteiro : Procedimentos

A presente investigação tem como objetivo identificar as diferenças existentes entre os procedimentos técnicos relativos ao tiro de Artilharia de Campanha e ao tiro de Morteiro. Tem por finalidade estudar a possibilidade de uniformização dos procedimentos, no que respeita aos procedimentos de Pontaria, cálculo dos Elementos de Tiro, Pedido e Regulação de Tiro e à Segurança, utilizados pelas unidades de tiro de Artilharia de Campanha e de Morteiro. O trabalho estuda cada tipo de procedimento, começando por enunciá-los e explicar os seus métodos, finalidade e determinação, tanto para o tiro de Artilharia de Campanha como para o tiro de Morteiro. Os procedimentos são comparados através de tabelas e sínteses, com o objetivo de analisar o porquê de serem executados da maneira prevista na doutrina, remetendo dessa forma para o estudo da sua possível padronização. Como método de recolha de dados foram submetidos inquéritos livres a oficiais subalternos de diversas unidades de formação e operacionais relacionadas com a instrução e execução do tiro de Artilharia de Campanha e de Morteiro, de forma a recolher a sua opinião sobre a viabilidade de adoção dos procedimentos e esclarecimento de dúvidas. Foram depois realizadas análises comparativas para verificar quais os procedimentos que apresentam possibilidade de uniformização. No final os procedimentos padronizáveis foram identificados e comparados com os procedimentos executados pelo Grupo de Artilharia de Campanha da Brigada de Reação Rápida, à qual pertence uma Bateria integrada na NATO Response Force 16. Sendo a única unidade orgânica a nível nacional que opera com meios de tiro de Artilharia de Campanha e de Morteiro, a sua análise foi crucial para a investigação. Dado que a finalidade do trabalho é estudar a possibilidade de adoção de procedimentos comuns, as conclusões tiveram a sua origem na análise comparativa com os procedimentos desta unidade. Verificou-se assim que os procedimentos são padronizáveis, mas que são necessárias algumas condições para que possam ser aplicados, devido às diferenças na orgânica e tática entre as unidades de tiro de Artilharia de Campanha e de Morteiro, à diferença técnica das armas e dos meios auxiliares de cálculo dos Elementos de Tiro e técnica dos dois tipos de tiro.

An Investigation of Waste Glass-Based Geopolymers Supplemented with Alumina

An increased consideration of sustainability throughout society has resulted in a surge of research investigating sustainable alternatives to existing construction materials. A new binder system, called a geopolymer, is being investigated to supplement ordinary portland cement (OPC) concrete, which has come under scrutiny because of the CO2 emissions inherent in its production. Geopolymers are produced from the alkali activation of a powdered aluminosilicate source by an alkaline solution, which results in a dense three-dimensional matrix of tetrahedrally linked aluminosilicates. Geopolymers have shown great potential as a building construction material, offering similar mechanical and durability properties to OPC. Additionally, geopolymers have the added value of a considerably smaller carbon footprint than OPC. This research considered the compressive strength, microstructure and composition of geopolymers made from two types of waste glass with varying aluminum contents. Waste glass shows great potential for mainstream use in geopolymers due to its chemical and physical homogeneity as well as its high content of amorphous silica, which could eliminate the need for sodium silicate. However, the lack of aluminum is thought to negatively affect the mechanical performance and alkali stability of the geopolymer system. Mortars were designed using various combinations of glass and metakaolin or fly ash to supplement the aluminum in the system. Mortar made from the high-Al glass (12% Al2O3) reached over 10,000 psi at six months. Mortar made from the low-Al glass (<1% Al2O3) did not perform as well and remained sticky even after several weeks of curing, most likely due to the lack of Al which is believed to cause hardening in geopolymers. A moderate metakaolin replacement (25-38% by mass) was found to positively affect the compressive strength of mortars made with either type of glass. Though the microstructure of the mortar was quite indicative of mechanical performance, composition was also found to be important. The initial stoichiometry of the bulk mixture was maintained fairly closely, especially in mixtures made with fine glass. This research has shown that glass has great potential for use in geopolymers, when care is given to consider the compositional and physical properties of the glass in mixture design.

Influência de polímeros superabsorventes na retracção de argamassas

Hoje em dia, o desenvolvimento dos superplastificantes permite a produção de betões com menor razão água/cimento. Ao usar razões água/cimento mais baixas, os materiais científicos apresentam maior tendência para fissurar devido à retracção autogénea. Este trabalho apresenta um estudo sobre a utilização de polímeros superabsorventes (SAP) no controlo da retracção. O uso de SAPs em materiais comentícios atenua a retracção autogénea pois estes produtos permitem o fornecimento interno de água. Estes produtos podem também afectar outras propriedades, afectando as características mecânicas e a trabalhabilidade. Para análise do efeito dos SAP foram estudadas argamassas com várias concentrações deste produto, tendo como referência argamassas semelhantes sem SAP, determinando-se as retracções autogénea e total, a resistência à compressão e o módulo de elasticidade. Além de SAP, foi também utilizado um agregado leve, um outro tipo de introdutor de água, para comparação com os polímeros em estudo. /ABSTRACT: This work presents a study on the use of superabsorbent polymers (SAP) in the control of shrinkage. The use of SAPs in cementitious materials reduces the autogenous shrinkage because these products enable the internal supply of water. These materials can also affect other properties such as mechanical properties and workability. To analyze the effect of SAP, mortars containing various concentrations of this product were studied, in comparison with reference mortars without SAP. The tests performed were autogenous and total shrinkage, compressive strength and modulus of elasticity. Besides SAP, it was also used a lightweight aggregate, another type of internal supply of water, for comparison with the polymers under study.

Novos desenvolvimentos para a deteção de leveduras e bactérias presentes em argamassas

The development of simple and rapid new approaches for analysing microbial communities colonising Cultural Heritage materials is pivotal for its safeguard. Fluorescence in situ hybridisation technique using ribosomal RNA directed probes (RNA-FISH) has demonstrated a great potential for this purpose. A protocol for analysing filamentous fungi in mortars has been already developed in previous studies. In this work this protocol has been adapted for detecting bacteria and yeasts. Good results have been obtained for the analysis of suspensions of isolates. In this way, the optimized protocol was applied in microsamples from synthetic mortar artificially inoculated with yeast and bacterial isolates. Promising results have been obtained for the ex situ analysis of yeast and bacteria thriving in mortar microsamples.

19th c. Coloured stuccos and plasters from Grilos' Church (Oporto, Portugal): Materials and techniques employed

The Oporto's St. Lourenço Church of the Jesuit College is locally known, since the St. Augustin Barefooted Eremites occupation (1779/80), as Grilos' Church. The Oporto's siege laid by D. Pedro and D. Miguel (1832/33) succeed in the college abandonment by Grilo's Friars. Throughout Augustin Friars presence period, the white plasters of the nave (end of 18th c.) were executed and it was constructed the Holly Sacrament Chapel (early 19th c.) with neoclassic coloured stuccos and plasters, influenced by Robert Adam, Luigi Chiari and Teixeira Barreto ornamental motifs. Pigments were added to the external layer to imitate the marble and to achieve the “base” colour of the panels. This study of the blue, rose and white stuccos and plasters of H.S. Chapel of Grilo's Church allows carrying out useful database on the original mortars composition by the use of different analytical techniques, important to select the most adequate solutions for restoration interventions. Optical microscopy, XRD, TG-DTA, SEM-EDS, XRF analysis results were considered to identify the composition of different layers and to provide mineralogical, microstructure and chemical characterization of the mortars components and to quantify the binder content in those mortars. These results were compared with collected information on compositions from other sources. This study allowed the identification of the decay causes of decorative stuccos and plaster, suggesting that water retention in the masonries and wooden laths structure of the dome of the chapel is the main factor.