Sea-floor videos and photographs (benthos) along 6 shelf profiles from the eastern Weddell Sea, Antarctica taken with remote operated vehicel CHEROKEE during Polarstern cruise ANT-XXI/2

The ROV operations had three objectives: (1) to check, whether the "Cherokee" system is suited for advanced benthological work in the high latitude Antarctic shelf areas; (2) to support the disturbance experiment, providing immediate visual Information; (3) to continue ecological work that started in 1989 at the hilltop situated at the northern margin of the Norsel Bank off the 4-Seasons Inlet (Weddell Sea). The "Cherokee" is was equipped with 3 video cameras, 2 of which support the operation. A high resolution Tritech Typhoon camera is used for scientific observations to be recorded. In addition, the ROV has a manipulator, a still camera, lights and strobe, compass, 2 lasers, a Posidonia transponder and an obstacle avoidance Sonar. The size of the vehicle is 160 X 90 X 90cm. In the present configuration without TMS (tether management system) the deployment has to start with paying out the full cable length, lay it in loops on deck and connect the glass fibres at the tether's spool winch. After a final technical check the vehicle is deployed into the water, actively driven perpendicular to the ship's axis and floatings are fixed to the tether. At a cable length of approx. 50 m, the tether is tightened to the depressor by several cable ties and both components are lowered towards the sea floor, the vehicle by the thruster's propulsion and the depressor by the ship's winch. At 5 m intervals the tether has to be tied to the single conductor cable. In good weather conditions the instruments supporting the navigation of the ROV, especially the Posidonia system, allow an operation mode to follow the ship's course if the ship's speed is slow. Together with the lasers which act as a scale in the images they also allow a reproducible scientific analysis since the transect can be plotted in a GIS system. Consequently, the area observed can be easily calculated. An operation as a predominantly drifting system, especially in areas with bottom near currents, is also possible, however, the connection of the tether at the rear of the vehicle is unsuitable for such conditions. The recovery of the system corresponds to that of the deployment. Most important is to reach the surface of the sea at a safe distance perpendicular to the ship's axis in order not to interfere with the ship's propellers. During this phase the Posidonia transponder system is of high relevance although it has to be switched off at a water depth of approx. 40 m. The minimum personal needed is 4 persons to handle the tether on deck, one person to operate the ship's winch, one pilot and one additional technician for the ROV's operation itself, one scientist, and one person on the ship's bridge in addition to one on deck for whale watching when the Posidonia system is in use. The time for the deployment of the ROV until it reaches the sea floor depends on the water depth and consequently on the length of the cable to be paid out beforehand and to be tightened to the single conductor cable. Deployment and recovery at intermediate water depths can last up to 2 hours each. A reasonable time for benthological observations close to the sea floor is 1 to 3 hours but can be extended if scientifically justified. Preliminary results: after a first test station, the ROV was deployed 3 times for observations related to the disturbance experiment. A first attempt to Cross the hilltop at the northern margin of the Norsel Bank close to the 4- Seasons Inlet was successful only for the first hundreds of metres transect length. The benthic community was dominated in biomass by the demosponge Cinachyra barbata. Due to the strong current of approx. 1 nm/h, the design of the system, and an expected more difficult current regime between grounded icebergs and the top of the hilltop the operation was stopped before the hilltop was reached. In a second attempt the hilltop was successfully crossed because the current and wind situation was much more suitable. In contrast to earlier expeditions with the "sprint" ROV it was the first time that both slopes, the smoother in the northeast and the steeper in the southwest were continuously observed during one cast. A coarse classification of the hilltop fauna shows patches dominated by single taxa: cnidarians, hydrozoans, holothurians, sea urchins and stalked sponges. Approximately 20 % of the north-eastern slope was devastated by grounding icebergs. Here the sediments consisted of large boulders, gravel or blocks of finer sediment looking like an irregularly ploughed field. On the Norsel Bank the Cinachyra concentrations were locally associated with high abundances of sea anemones. Total observation time amounted to 11.5 hours corresponding to almost 6-9 km transect length.

Mineral composition of 356 sediment profiles from the Arctic seas

This data set contains the mineralogical analyses (binocular counting) of the 100-50 µm grain size fraction from bottom sediments collected by scientists of the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov between 1978 and 1990. The analyses have been carried out according to the methods published by Petelin V.P. (1961) in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Chemical composition of 169 sediment profiles from the Arctic seas

This data set contains chemical composition of bottom sediments collected by scientists from the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov between 1978 and 1990. The analyses have been carried out in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Paleomagnetic measurements of 10 sediment profiles from the Antarctic continental slope

Die im Rahmen des zweijährigen Forschungsprojekts über paläomagnetisch-sedimentologische Analysen sedimentärer Zyklen in der Weddell See und ihre stratigraphische Interpretation durchgeführten Arbeiten lieferten Ergebnisse zur Geschichte glaziomariner Sedimentationsprozesse am antarktischen Kontinentalrand. So konnte für ein Kernprofil mit einer außergewöhnlichen Terassenstruktur eine fazielle Gliederung und stratigraphische Einordnung erreicht werden, die auch auf größere Areale in der Weddell See anwendbar sind. Aufgrund der stratigraphischen Randbedingungen konnten die gewonnenen paläo- und gesteinsmagnetischen Messungen in eine Altersstruktur integriert und zusammen mit den sedimentologischen Parametern im Hinblick auf lokale und regionale Umweltveränderungen interpretiert werden. Insbesondere die gesteinsmagnetischen Analysen haben gezeigt, daß die magnetische Kornfraktion als accessorischer Bestandteil im Gesamtsediment dennoch an die Sortierungsprozesse des terrigenen Sedimenteintrags gekoppelt ist. Die ungewöhnlich deutlichen Variationen korngrößenabhängiger Parameter zeigten weiterhin, daß in Verbindung mit einer hochauflösenden Stratigraphie die magnetische Detailanalyse und ein besseres Verständnis der Sedimentationsprozesse in der Nähe der Schelfeiskante und speziell bei Meeresspiegeltiefständen die Möglichkeit eröffnen, unmittelbar Aussagen über die Bewegungen der Schelfeise und die Qualität der Meereisbedeckungen zu machen. Die gezielte Fortsetzung dieser Arbeiten in anderen Arealen am antarktischen Kontinentalrand ist daher wünschenswert. Die verwendeten Verfahren lassen sich mit den derzeit verfügbaren Instrumenten noch erweitern und versprechen durch die sehr sensitive Methodik detaillierte Aussagen zu glaziomarinen Sedimentationsprozessen.

Steel profiles for repairing deteriorated timber beam ends

Se describe un procedimiento para la consolidación de viguetas de forjado de madera con deterioro en las cabezas mediante perfiles de acero conectados a la madera desde la cara superior del forjado. La pieza de refuerzo es un perfil en U de acero S275 conformado en frío con pletinas soldadas insertadas en la madera y conectada mediante tirafondos. Se ensayaron 30 piezas a flexión obteniendo la rigidez y la capacidad de carga. Las probetas se dividieron en tres grupos. El primero compuesto por 10 piezas de madera laminada encolada de abeto con una sección de 180 x 200 mm y una longitud de 4.000 mm; el segundo consistía en 10 piezas de madera aserrada de pino silvestre con la misma sección y longitud y, el tercero, estaba formado por otras 10 piezas de madera del género Pinus con una sección de 130 x 150 mm y 3.000 mm de longitud, procedentes de un edificio de Madrid con 120 años de antigüedad. Cada grupo de 10 piezas se dividió a su vez en dos grupos de 5 piezas. El primer subgrupo estaba formado por las piezas completas de madera y constituía el grupo de referencia. Las piezas del segundo subgrupo tenían una longitud inferior que se salvaba con una extensión del refuerzo metálico. Los resultados indican que el sistema de refuerzo metálico permite resolver los problemas de falta de apoyo de la vigueta por deterioro de la madera que afecte en una longitud limitada (aproximadamente entre el 10 y el 20% de la longitud).

Metadata Visualization of Cultural Heritage Information within a Collaborative Environment

Cultural content on the Web is available in various domains (cultural objects, datasets, geospatial data, moving images, scholarly texts and visual resources), concerns various topics, is written in different languages, targeted to both laymen and experts, and provided by different communities (libraries, archives museums and information industry) and individuals (Figure 1). The integration of information technologies and cultural heritage content on the Web is expected to have an impact on everyday life from the point of view of institutions, communities and individuals. In particular, collaborative environment scan recreate 3D navigable worlds that can offer new insights into our cultural heritage (Chan 2007). However, the main barrier is to find and relate cultural heritage information by end-users of cultural contents, as well as by organisations and communities managing and producing them. In this paper, we explore several visualisation techniques for supporting cultural interfaces, where the role of metadata is essential for supporting the search and communication among end-users (Figure 2). A conceptual framework was developed to integrate the data, purpose, technology, impact, and form components of a collaborative environment, Our preliminary results show that collaborative environments can help with cultural heritage information sharing and communication tasks because of the way in which they provide a visual context to end-users. They can be regarded as distributed virtual reality systems that offer graphically realised, potentially infinite, digital information landscapes. Moreover, collaborative environments also provide a new way of interaction between an end-user and a cultural heritage data set. Finally, the visualisation of metadata of a dataset plays an important role in helping end-users in their search for heritage contents on the Web.

Extending DCAM for Metadata Provenance

The Metadata Provenance Task Group aims to define a data model that allows for making assertions about description sets. Creating a shared model of the data elements required to describe an aggregation of metadata statements allows to collectively import, access, use and publish facts about the quality, rights, timeliness, data source type, trust situation, etc. of the described statements. In this paper we outline the preliminary model created by the task group, together with first examples that demonstrate how the model is to be used.