Sugarcane trash management assessed by the interaction of yield with soil properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribuição espacial de atributos químicos do solo em área de pastagem e floresta

The knowledge on spatial distribution of soil properties by means of geostatistics is important as an indicator for a better soil use and management. This study aimed at evaluating the spatial distribution of soil chemical properties, in a forest and pasture area in Manicoré, Amazonas State, Brazil. Grids with 70.00 m x 70.00 m, with regular spacing of 10.00 m x 10.00 m, totaling 64 points, were established, and then soil samples were collected at the depths of 0.0-0.20 m and 0.40-0.60 m and had their chemical properties determined. Data were analyzed by using descriptive statistics and geostatistics, and the sampling density analysis was based on the coefficient of variation and semivariograms range. The mean and median values were adjusted to the closest values, indicating normal distribution, while the spherical, exponential and gaussian models were adjusted to the soil chemical properties. It was concluded that the geostatistics provided adequate information for understanding the spatial distribution. The forest area showed a higher spatial continuity and the pasture area a lower sampling density. The chemical properties showed differences in the spatial variability, while the range represented better the estimates for sampling density and spacing, in the forest and pasture area.

Geoestatística na avaliação dos atributos físicos em latossolo sob floresta nativa e pastagem na Região de Manicoré, Amazonas

The use of geostatistical techniques allows detection of the existence of dependence and the spatial distribution of soil properties, thus constituting an important tool in the analysis and detailed description of the behavior of soil physical properties. The aim of the present study was to use geostatistics in assessment of physical properties in a Latossolo (Oxisol) dystrophic under native forest and pasture in the Amazon region of Manicore. Grids with of 70 x 70 m were established in native forest and pasture, and points were marked in these grids spaced at every 10 m, for a total of 64 points. These points were then georeferenced and in each one, soil samples (128) were collected at the depths of 0.00-0.20 and 0.40-0.60 m for a survey of their physical properties. These grids are parallel at a distance of 100 m from one another. The following determinations were made: texture, bulk density and particle density, macroporosity, microporosity, total porosity and aggregate stability in water. After tabulating the data, descriptive statistical analysis and geostatistical analysis were performed. The pasture had a slight variation in its physical properties in relation to native forest, with a high coefficient of variation and weak spatial dependence. The scaled semivariograms were able to satisfactorily reproduce the spatial behavior of the properties in the same pattern as the individual semivariograms, and the use of the parameter range of the semivariogram was efficient for determining the optimal sampling density for the environments under study. The geostatistical results indicate that the removal of native forest for establishing pasture altered the natural variability of the physical properties.

Desenvolvimento de uma plataforma de software para a modelagem digital de terrenos baseada em TIN

Topographical surfaces can be represented with a good degree of accuracy by means of maps. However these are not always the best tools for the understanding of more complex reliefs. In this sense, the greatest contribution of this work is to specify and to implement the architecture of an opensource software system capable of representing TIN (Triangular Irregular Network) based digital terrain models. The system implementation follows the object oriented programming and generic paradigms enabling the integration of various opensource tools such as GDAL, OGR, OpenGL, OpenSceneGraph and Qt. Furthermore, the representation core of the system has the ability to work with multiple topological data structures from which can be extracted, in constant time, all the connectivity relations between the entities vertices, edges and faces existing in a planar triangulation what helps enormously the implementation for real time applications. This is an important capability, for example, in the use of laser survey data (Lidar, ALS, TLS), allowing for the generation of triangular mesh models in the order of millions of points.

Simulação numérica do processo de secagem de madeiras

Pós-graduação em Engenharia Mecânica - FEG

A influência do controlador gupfc no sistema elétrico de potência visando a estabilidade a pequenas perturbações

Pós-graduação em Engenharia Elétrica - FEIS

Aplicação de água ozonizada como agente sanitizante durante o processamento de café arábica

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção e qualidade do biogás gerado com os dejetos de diferentes espécies animais

Pós-graduação em Zootecnia - FCAV

Variabilidade espacial de atributos de solos coesos do leste maranhense

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phosphorus reduction by sifting fish waste meal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Por trás dos muros: o impacto dos condomínios fechados no fragmento urbano

A pesquisa tem como objetivo analisar o impacto dos condomínios fechados no fragmento da malha urbana em que se inseri. Além disso, pretende-se avaliar a percepção ambiental que os condomínios fechados exercem sobre os cidadãos, sejam eles usuários dos condomínios ou do seu entorno. A metodologia fundamenta-se em pesquisa de campo, pois serão aplicados questionários junto aos moradores de condomínios fechados, as pessoas que moram ou trabalham em locais próximos desses empreendimentos, e a arquitetos, planejadores e urbanistas. Para tanto, adotou-se os métodos empregados em pesquisas de Avaliação Pós-Ocupação (APO). Através dos resultados obtidos pela APO, pretende-se diagnosticar e compreender os efeitos positivos e negativos desse tipo de empreendimento em malhas urbanas

Avaliação do método de classificação baseada no objeto em imagens de alta resolução espacial aplicado para o monitoramento de faixa de dutos: estudo de caso no entorno da refinaria de Capuava em Mauá - SP

The metropolitan region of São Paulo is the most populous of the country, this happens because of its great importance in the national economy and the job opportunities that are offered to the population. These factors result in intense population growth and urban expansion, reaching some non-habitable places of the metropolis, as areas of pipelines, which are very important for the transportation of natural gas, oil and its derivatives. Before the population growth of the region, these sites were unoccupied, do not presenting problems for the population. However, with the disorderly occupation is generated great anthropogenic pressure on the pipeline stitches, causing risks to people who are around them. Therefore it is extremely important to monitor the strip of pipelines through products and techniques of remote sensing and geoprocessing, enabling, through high spatial resolution images, identification of objects or phenomena that occur on Earth's surface that can alter the functioning and safety of pipelines. Therefore, this study aims to monitor a stretch of the area of the pipeline mesh GASPAL/OSVAT and Capuava Refinery (RECAP), located on the outskirts of the metropolitan area of São Paulo in the city of Mauá, who suffer great human pressure, proving thus the techniques of remote sensing and geographic information system (GIS) as effective tools for monitoring phenomena occurred in urban areas of great complexity. The monitoring was done by object-based classification applied in orbital images Ikonos II and RapidEye, of high spatial resolution and, image processing, detection of objects, segmentation, classification and editing were developed through the eCognition and ArcGis softwares. To determine the statistical accuracy of the mapping of the land cover of the stretch of pipeline in Maua, the results were analyzed by error matrix... (Complete abstract click electronic access below)

Um método para reconstrução de superfícies baseado em nuvem de pontos visando representações em multirresolução

The representation of real objects in virtual environments has applications in many areas, such as cartography, mixed reality and reverse engineering. The generation of these objects can be performed in two ways: manually, with CAD (Computer Aided Design) tools, or automatically, by means of surface reconstruction techniques. The simpler the 3D model, the easier it is to process and store it. Multiresolution reconstruction methods can generate polygonal meshes in different levels of detail and, to improve the response time of a computer program, distant objects can be represented with few details, while more detailed models are used in closer objects. This work presents a new approach to multiresolution surface reconstruction, particularly interesting to noisy and low definition data, for example, point clouds captured with Kinect sensor

Aspectos reprodutivos de três espécies de Curimatidae (Characiformes) em um reservatório do Rio Mogi Guaçu, bacia do Alto Rio Paraná, São Paulo, Brasil

Os curimatídeos são espécies comuns em ambientes lênticos represados, artificialmente construídos. Estudar o ciclo reprodutivo de uma espécie é fundamental para a compreensão da biologia reprodutiva da população em seu ambiente. Por isso, o presente estudo analisou os aspectos da biologia reprodutiva dos sagüirus Cyphocharax modestus, C. cf. nagelii e Steindachnerina insculpta (Curimatidae), no reservatório da pequena central hidrelétrica Mogi Guaçu, município de Mogi Guaçu, estado de São Paulo. Os exemplares foram coletados bimensalmente entre agosto de 2005 e julho de 2006 com o auxílio de redes de emalhar (malhas 1,0 a 5,0 cm entre nós adjacentes), totalizando seis amostras. No total, foram analisados 777 exemplares, sendo 525 de C. modestus, 82 de C.cf. nagelii e 170 de S. insculpta. A dinâmica reprodutiva foi analisada considerando-se os períodos seco e chuvoso. A fecundidade foi estimada de acordo com o método volumétrico a partir da análise de 168 pares de ovários maduros, sendo 121 de C. modestus, 18 de C. cf nagelii e 29 de S. insculpta. Também foram estimadas as relações gonadossomáticas médias e as correlações do número total de ovócitos em relação ao peso e ao comprimento para cada uma das três espécies. Os resultados encontrados apontaram para desova total (sincrônica em dois grupos) para as três espécies. O número médio de ovócitos foi de 15.309 a 28.825 para C. modestus, 29.031 para C. cf. nagelii e 27.206 para S. insculpta.

Melhoria do nível de serviço no atendimento ao cliente por meio da estrutura direta de distribuição Transit Point

Increasingly competitive markets have driven the search for companies in many different ways to win and keep customers. The service level is basically the performance of companies in fulfilling the orders made, or how companies demonstrate to their clients efforts in their behalf. This work aims to solve the difficulties faced by a multinational company present in Brazil, in the distribution of its products in the category Ice Cream in order to improve the service level of their customers. Review the logistics network and concepts related to the distribution system of products is one of several ways to achieve this goal, as well as the use of IT and tools to assist in planning and programming of the physical distribution of products. In this study we used the concept of direct distribution system called Transit Point (TP). The TP provides at the same time, a strategy of rapid response, flexibility, low transportation costs and no inventory. A router - software capable of simulating the actual conditions experienced in the daily distribution - was used to assist in calculations. Results showed reductions of up to 47.5% in transportation costs and better conditions were provided in the distribution of products, positively impacting on service levels and in the maintenance of products quality, with a reduction of 1.6% of the total costs involve