Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Determination of patulin in apple juice by HPLC using a simple and fast sample preparation method

The goal of this work was to develop a simple and rapid preparation method for patulin analysis in apple juice without previous clean-up. This method combined sonication and liquid extraction techniques and was used for determination of patulin in 37 commercial apple juices available on the market in the South of Brazil. The method performance characteristics were determined using a sample obtained in a local market fortified at five concentration levels of patulin and done in triplicates. The coefficient of variation for repeatability at the fortification level of 20.70µg.L-1 was 3.53 % and the recovery 94.63 %, respectively. The correlation coefficient was 0.9996 and agrees with the requirements for a linear analytical method value. The detection limit was 0.21µg.L-1 and the quantification limit 0.70 µg.L-1. Only three of the analyzed samples were upper the allowed level of 50.00 µg.L-1 recommended for the World Health Organization.

Estimation of the potential evapotranspiration by a simplified penman method

The numerous methods for calculating the potential or reference evapotranspiration (ETo or ETP) almost always do for a 24-hour period, including values of climatic parameters throughout the nocturnal period (daily averages). These results have a nil effect on transpiration, constituting the main evaporative demand process in cases of localized irrigation. The aim of the current manuscript was to come up with a model rather simplified for the calculation of diurnal daily ETo. It deals with an alternative approach based on the theoretical background of the Penman method without having to consider values of aerodynamic conductance of latent and sensible heat fluxes, as well as data of wind speed and relative humidity of the air. The comparison between the diurnal values of ETo measured in weighing lysimeters with elevated precision and estimated by either the Penman-Monteith method or the Simplified-Penman approach in study also points out a fairly consistent agreement among the potential demand calculation criteria. The Simplified-Penman approach was a feasible alternative to estimate ETo under the local meteorological conditions of two field trials. With the availability of the input data required, such a method could be employed in other climatic regions for scheduling irrigation.

Covalidation of Integral Transforms and Method of Lines in Nonlinear Convection-Diffusion with Mathematica

The Mathematica system (version 4.0) is employed in the solution of nonlinear difusion and convection-difusion problems, formulated as transient one-dimensional partial diferential equations with potential dependent equation coefficients. The Generalized Integral Transform Technique (GITT) is first implemented for the hybrid numerical-analytical solution of such classes of problems, through the symbolic integral transformation and elimination of the space variable, followed by the utilization of the built-in Mathematica function NDSolve for handling the resulting transformed ODE system. This approach ofers an error-controlled final numerical solution, through the simultaneous control of local errors in this reliable ODE's solver and of the proposed eigenfunction expansion truncation order. For covalidation purposes, the same built-in function NDSolve is employed in the direct solution of these partial diferential equations, as made possible by the algorithms implemented in Mathematica (versions 3.0 and up), based on application of the method of lines. Various numerical experiments are performed and relative merits of each approach are critically pointed out.

Local Features in Image and Video Processing - Object Class Matching and Video Shot Detection

The usage of digital content, such as video clips and images, has increased dramatically during the last decade. Local image features have been applied increasingly in various image and video retrieval applications. This thesis evaluates local features and applies them to image and video processing tasks. The results of the study show that 1) the performance of different local feature detector and descriptor methods vary significantly in object class matching, 2) local features can be applied in image alignment with superior results against the state-of-the-art, 3) the local feature based shot boundary detection method produces promising results, and 4) the local feature based hierarchical video summarization method shows promising new new research direction. In conclusion, this thesis presents the local features as a powerful tool in many applications and the imminent future work should concentrate on improving the quality of the local features.

Local Binary Patterns in Focal-Plane Processing. Analysis and Applications

Feature extraction is the part of pattern recognition, where the sensor data is transformed into a more suitable form for the machine to interpret. The purpose of this step is also to reduce the amount of information passed to the next stages of the system, and to preserve the essential information in the view of discriminating the data into different classes. For instance, in the case of image analysis the actual image intensities are vulnerable to various environmental effects, such as lighting changes and the feature extraction can be used as means for detecting features, which are invariant to certain types of illumination changes. Finally, classification tries to make decisions based on the previously transformed data. The main focus of this thesis is on developing new methods for the embedded feature extraction based on local non-parametric image descriptors. Also, feature analysis is carried out for the selected image features. Low-level Local Binary Pattern (LBP) based features are in a main role in the analysis. In the embedded domain, the pattern recognition system must usually meet strict performance constraints, such as high speed, compact size and low power consumption. The characteristics of the final system can be seen as a trade-off between these metrics, which is largely affected by the decisions made during the implementation phase. The implementation alternatives of the LBP based feature extraction are explored in the embedded domain in the context of focal-plane vision processors. In particular, the thesis demonstrates the LBP extraction with MIPA4k massively parallel focal-plane processor IC. Also higher level processing is incorporated to this framework, by means of a framework for implementing a single chip face recognition system. Furthermore, a new method for determining optical flow based on LBPs, designed in particular to the embedded domain is presented. Inspired by some of the principles observed through the feature analysis of the Local Binary Patterns, an extension to the well known non-parametric rank transform is proposed, and its performance is evaluated in face recognition experiments with a standard dataset. Finally, an a priori model where the LBPs are seen as combinations of n-tuples is also presented

Novel retrograde puncture method to establish preperitoneal space for laparoscopic direct inguinal hernia repair with internal ring suturing

The aim of this study was to explore the clinical efficacy of a novel retrograde puncture approach to establish a preperitoneal space for laparoscopic direct inguinal hernia repair with inguinal ring suturing. Forty-two patients who underwent laparoscopic inguinal hernia repair with retrograde puncture for preperitoneal space establishment as well as inguinal ring suturing between August 2013 and March 2014 at our hospital were enrolled. Preperitoneal space was successfully established in all patients, with a mean establishment time of 6 min. Laparoscopic repairs were successful in all patients, with a mean surgical time of 26±15.1 min. Mean postoperative hospitalization duration was 3.0±0.7 days. Two patients suffered from postoperative local hematomas, which were relieved after puncturing and drainage. Four patients had short-term local pain. There were no cases of chronic pain. Patients were followed up for 6 months to 1 year, and no recurrence was observed. Our results demonstrate that preperitoneal space established by the retrograde puncture technique can be successfully used in adult laparoscopic hernioplasty to avoid intraoperative mesh fixation, and thus reduce medical costs.

TAKING ADVANTAGE OF THE LOCAL ADVANTAGE? - Investment value of the analyst local advantage in the Finnish stock market in 2006–2014

An investor can either conduct independent analysis or rely on the analyses of others. Stock analysts provide markets with expectations regarding particular securities. However, analysts have different capabilities and resources, of which investors are seldom cognizant. The local advantage refers to the advantage stemming from cultural or geographical proximity to securities analyzed. The research has confirmed that local agents are generally more accurate or produce excess returns. This thesis tests the investment value of the local advantage regarding Finnish stocks via target price data. The empirical section investigates the local advantage from several aspects. It is discovered that local analysts were more focused on certain sectors generally located close to consumer markets. Market reactions to target price revisions were generally insignificant with the exception to local positive target prices. Both local and foreign target prices were overly optimistic and exhibited signs of herding. Neither group could be identified as a leader or follower of new information. Additionally, foreign price change expectations were more in line with the quantitative models and ideas such as beta or return mean reversion. The locals were more accurate than foreign analysts in 5 out of 9 sectors and vice versa in one. These sectors were somewhat in line with coverage decisions and buttressed the idea of local advantage stemming from proximity to markets, not to headquarters. The accuracy advantage was dependent on sample years and on the measure used. Local analysts ranked magnitudes of price changes more accurately in optimistic and foreign analysts in pessimistic target prices. Directional accuracy of both groups was under 50% and target prices held no linear predictive power. Investment value of target prices were tested by forming mean-variance efficient portfolios. Parallel to differing accuracies in the levels of expectations foreign portfolio performed better when short sales were allowed and local better when disallowed. Both local and non-local portfolios performed worse than a passive index fund, albeit not statistically significantly. This was in line with previously reported low overall accuracy and different accuracy profiles. Refraining from estimating individual stock returns altogether produced statistically significantly higher Sharpe ratios compared to local or foreign portfolios. The proposed method of testing the investment value of target prices of different groups suffered from some inconsistencies. Nevertheless, these results are of interest to investors seeking the advice of security analysts.

Development of a rapid method for the determination of antibiotic residues in honey using UPLC-ESI-MS/MS

Abstract An accurate, reliable and fast multianalyte/multiclass ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method was developed and validated for the simultaneous analysis of 23 pharmaceuticals, belonging to different classes amphenicols, sulfonamides, tetracyclines, in honey samples. The method developed consists of ultrasonic extraction followed by UPLC–ESI–MS/MS with electrospray ionization in both positive mode and negative mode. The influence of the extraction solvents and mobile phase composition on the sensitivity of the method, and the optimum conditions for sample weight and extraction temperature in terms of analyte recovery were extensively studied. The identification of antibiotics is fulfilled by simultaneous use of chromatographic separation using an Acquity BEH C18 (100 mm x 2.1 mm, 1.7 µm) analytical column with a gradient elution of mobile phases and tandem mass spectrometry with an electrospray ionization. Finally, the method developed was applied to the determination of target analytes in honey samples obtained from the local markets and several beekeepers in Muğla, Turkey. Ultrasonic-extraction of pharmaceuticals from honey samples is a well-established technique by UPLC–ESI–MS/MS, the uniqueness of this study lies in the simultaneous determination of a remarkable number of compounds belonging to 23 drug at the sub-nanogram per kilogram level.

Comparing the alternative utilization method for coconut in Nzema, Ghana

There are many opportunities to utilise coconut in Nzema to support farmers. Coconut oil that is mainly used for food preparation in Nzema can be utilized as fuel to support overcoming of the energy crisis in the Ghana. Coconut oil in Nzema is not used in both transportation and electricity generation. A few of the waste husk and shell are mainly used as fuel in homes for heating but greater amount is left to rot or burn the coconut plantation. In addition, some portion of the granulated coconut kernel is sometime used as feed for piggery feed and the rest of the granulated kernel are left as waste on the oil processing site. In this thesis, the author identified alternative utilization of cocoanut, for instance the use of coconut husk and shell for charcoal production, and the use of coconut trunks as construction materials. It is envisaged that exploring these alternatives will not only reduce carbon emission in the country but will also contribute significantly to the sustainability of the local agro-industry.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

TAKING ADVANTAGE OF THE LOCAL ADVANTAGE? - Investment value of the analyst local advantage in the Finnish stock market in 2006–2014

An investor can either conduct independent analysis or rely on the analyses of others. Stock analysts provide markets with expectations regarding particular securities. However, analysts have different capabilities and resources, of which investors are seldom cognizant. The local advantage refers to the advantage stemming from cultural or geographical proximity to securities analyzed. The research has confirmed that local agents are generally more accurate or produce excess returns. This thesis tests the investment value of the local advantage regarding Finnish stocks via target price data. The empirical section investigates the local advantage from several aspects. It is discovered that local analysts were more focused on certain sectors generally located close to consumer markets. Market reactions to target price revisions were generally insignificant with the exception to local positive target prices. Both local and foreign target prices were overly optimistic and exhibited signs of herding. Neither group could be identified as a leader or follower of new information. Additionally, foreign price change expectations were more in line with the quantitative models and ideas such as beta or return mean reversion. The locals were more accurate than foreign analysts in 5 out of 9 sectors and vice versa in one. These sectors were somewhat in line with coverage decisions and buttressed the idea of local advantage stemming from proximity to markets, not to headquarters. The accuracy advantage was dependent on sample years and on the measure used. Local analysts ranked magnitudes of price changes more accurately in optimistic and foreign analysts in pessimistic target prices. Directional accuracy of both groups was under 50% and target prices held no linear predictive power. Investment value of target prices were tested by forming mean-variance efficient portfolios. Parallel to differing accuracies in the levels of expectations foreign portfolio performed better when short sales were allowed and local better when disallowed. Both local and non-local portfolios performed worse than a passive index fund, albeit not statistically significantly. This was in line with previously reported low overall accuracy and different accuracy profiles. Refraining from estimating individual stock returns altogether produced statistically significantly higher Sharpe ratios compared to local or foreign portfolios. The proposed method of testing the investment value of target prices of different groups suffered from some inconsistencies. Nevertheless, these results are of interest to investors seeking the advice of security analysts.

Effects of intracerebroventricular bombesin administration on local cerebral glucose utilization in the restrained and unrestrained rat

Intracerebroventricular (ICV) administration of bombesin (BN) induces a syndrome characterized by stereotypic locomotion and grooming, hyperactivity and sleep elimination, hyperglycemia and hypothermia, hyperhemodynamics, feeding inhibition, and gastrointestinal function changes. Mammalian BN-like peptides (MBNs), e.g. gastrin-releasing peptide (GRP), Neuromedin C (NMC), and Neuromedin B (NMB), have been detected in the central nervous system. Radio-labeled BN binds to specific sites in discrete cerebral regions. Two specific BN receptor subtypes (GRP receptor and NMB receptor) have been identified in numerous brain regions. The quantitative 2-[14C]deoxyglucose ([14C]20G) autoradiographic method was used to map local cerebral glucose utilization (LCGU) in the rat brain following ICV injection of BN (vehicle, BN O.1Jlg, O.5Jlg). At each dose, experiments were conducted in freely moving or restrained conditions to determine whether alterations in cerebral function were the result of BN central administration, or were the result of BN-induced motor stereotypy. The anteroventral thalamic nucleus (AV) (p=O.029), especially its ventrolateral portion (AVVL) (plocalized alteration in cerebral metabolism within parts of the anterior thalamus, which is the principle relay in the limbic circuitry. BN effects were also observed in IGr, Mi, SCh, and ME. Effects of restraint were found in LOVL, LOOM, and LG. It is suggested that increased LCGU in AV and AVVL may be the result of functional change in the limbic circuitry and the hypothalamus caused by BN receptor functional modification. In IGr, increased LCGU following BN administration is considered to be mainly the result the activation of NMB receptor, a subtype of BN receptors. In SCh, increased LCGU is believed to be caused both by BN effects on the thalamic, the hypothalamic, and the limbic functions and by activation of GRP receptor, another BN receptors subtype found in SCh. In ME, increased LCGU is suggested to be caused by BN effects on the hypothalamic functions, especially those related to the neuroendocrine functions. None of the alterations seen in these regions reflects the emission of stereotyped motor behaviors. Rather, they reflect a direct influence of BN central administration upon functioning of the cerebral regions influenced by BN administration. The restraint effects seen in LO, including LOOM and LOVL, are suggested to be the result of altered behavioral expression. The restraint effects seen in LG is suggested to be the result of reduced locomotion.

Action collective patronale : les mécanismes de diffusion entre les niveaux sectoriel et local

Cette recherche s'intéresse à l'acteur patronal organisé, encore peu étudié en Amérique du Nord. Pourtant, cet acteur est fortement organisé au Québec et il exerce une influence reconnue sur les politiques publiques et les relations industrielles. Cette recherche vise à mieux comprendre la logique d’action des employeurs et les lieux où ils exercent leur influence. Plus important encore, la recherche s’interroge sur les mécanismes de diffusion utilisés par les associations patronales pour transmettre à leurs membres des orientations et des lignes directrices à adopter. Tout comme pour l’acteur syndical qui doit développer sa capacité représentative (Dufour, Hege, Levesque et Murray, 2009), nous croyons qu’il en est de même pour l’acteur patronal. Bref, cette étude cherche à comprendre comment les associations patronales vont s'assurer que leurs membres adoptent des pratiques en lien avec les positions défendues dans les institutions du marché du travail et dans la sphère des politiques publiques. Notre question de recherche est la suivante : Quels sont les mécanismes développés par les associations patronales pour diffuser leurs orientations en matière de politiques publiques et de relations du travail en vue d’influencer les pratiques locales de gestion de leurs membres? Au plan théorique, cette étude mobilise les idées développées par les approches néo-institutionnalistes pour mieux expliquer comment les acteurs vont utiliser les institutions en place pour façonner les règles dans leurs intérêts, ce qui suppose d’abord une capacité de représentation et une cohérence dans les actions entre les niveaux où se situent l’acteur. On cherche à comprendre comment les associations peuvent coordonner les actions patronales en réaction aux changements qui s’opèrent dans l’environnement institutionnel. Les associations patronales sont des entrepreneurs institutionnels (Crouch, 2005) qui sont à la recherche active d’opportunités et de leviers de pouvoir à utiliser pour maximiser leurs intérêts de leurs membres et par la même occasion, réduire les incertitudes en provenance de l’environnement (Campbell, 2004; Streeck et Thelen, 2005; Crouch, 2005). Toujours au niveau théorique, cette étude se base sur les idées avancées par la sociologie des logiques d’action. Cette approche théorique nous permet de rendre compte des niveaux sectoriel et local où s’enracinent les comportements des employeurs. Au niveau sectoriel, il existe une pluralité d’instances qui contribuent à façonner les logiques d’actions des associations patronales. La sociologie des logiques d’actions nous permet d’envisager l’association patronale comme un groupe qui dispose d’une vie qui lui est propre avec une relative autonomie de fonctionnement. La capacité d’influence de l’association serait tributaire des mécanismes de coordination de l’action utilisés pour susciter l’accord au sein du groupe. Les mécanismes de coordination de l’action devraient permettre une connexion régulière et stable entre l’association et ses membres. Cette recherche s’intéresse aux associations patronales qui ont recours à un ensemble de moyens pour diffuser les orientations privilégiées aux entreprises membres. Au plan empirique, cette recherche propose de répondre aux trois objectifs suivants : (1) mieux comprendre les formes d’organisation patronales dans les mines au Québec; (2) mieux saisir la structure et la logique d’action des associations patronales sur les politiques publiques, les relations de travail et le marché du travail et finalement (3) mieux comprendre les mécanismes développés par les associations patronales pour diffuser leurs orientations en vue d’influencer les pratiques locales de gestion de leurs membres. Pour atteindre nos objectifs de recherche, nous avons utilisé une méthodologie qualitative de recherche soit une étude de cas du secteur des mines au Québec. Cette dernière a été conduite en trois étapes : la préparation, la collecte des données et l’interprétation (Merriam, 1998). Les données de cette étude ont été recueillies à l’hiver 2012, par le biais d’entretiens semi-directifs auprès de gestionnaires d’entreprises minières et de dirigeants d’associations minières. Une analyse qualitative du contenu de ces entrevues a été effectuée en lien avec la revue de littérature et nos propositions de recherche. À cette fin, nous avons utilisé la technique de l’appariement logique de Yin (1994), ce qui nous a permis de comparer nos observations à nos propositions de recherche. Au niveau des résultats, nous avons pu constater que les associations patronales du secteur des mines au Québec, endossent davantage le rôle de porte-parole de l’industrie auprès du gouvernement que celui de développeur de services aux membres. Les actions des associations patronales s’exercent à tous les niveaux décisionnels afin d’assurer la meilleure promotion possible des intérêts des employeurs. La représentation politique représente le champ d’activité le plus important qui compose la logique d’action des associations patronales de la filière minérale québécoise. Mentionnons également que la représentation des intérêts des entreprises auprès du public et des médias est également vitale à l’action collective patronale dans un souci d’acceptabilité sociale. Les associations d’employeurs vont tenter principalement d’influencer les pratiques en relations industrielles qui permettent d’assurer une meilleure image de l’industrie et qui sont jugées prioritaires en fonction du contexte institutionnel en place. La recherche nous a permis d’observer un impact favorable et significatif à la capacité de diffusion pour cinq des sept mécanismes de diffusion faisant partie de notre modèle d’analyse. Trois de ces cinq mécanismes favorisent la capacité de diffusion descendante (transposition de la logique d’action sectorielle sur les pratiques locales des membres) et les deux autres favorisent plutôt la capacité de diffusion ascendante (transposition des enjeux locaux jugés prioritaires sur la logique d’action sectorielle). Les mécanismes qui supportent au mieux la cohésion au sein de l’association sont ceux qui impliquent une relation dynamique entre les représentants et les membres et entre les membres eux-mêmes d’où la pertinence d’une diffusion descendante et ascendante des orientations. Il est à noter qu’étant donné que cette recherche consiste en une étude de cas, des limites méthodologiques liées à la généralisation des résultats sont présentes. Il n’est pas aisé d’affirmer que les résultats de cette microanalyse soient généralisables en raison des spécificités du secteur à l’étude. En contrepartie, les analyses ont servi à l’élaboration d’un modèle qui pourra être utilisé dans des études futures.

Detection of microcalcifications in mammograms using local maxima andadaptive wavelet transform analysis

A method for computer- aided diagnosis of micro calcification clusters in mammograms images presented . Micro calcification clus.eni which are an early sign of bread cancer appear as isolated bright spots in mammograms. Therefore they correspond to local maxima of the image. The local maxima of the image is lint detected and they are ranked according to it higher-order statistical test performed over the sub band domain data