950 resultados para Irrigação localizada
Resumo:
The objective of this research was to study three methods of parameter determination for irrigation control under different tensions in common bean (Phaseolus vulgaris L.). The treatments were a combination of three methods of parameter determination for irrigation control (tensiometer, water retention curve, USWB Class A pan) with three soil water tensions (1:-30 kPa; 2:-60, kPa both for the whole plant cycle; 3:-60 kPa for the vegetative phase and -30 kPa for the reproductive phase). The experimental design was randomized blocks, factorial 32 with three replicates. Although no significant effect on water use efficiency was found, a tendency for increasing water use efficiency in treatments with tensions of -60 kPa at the vegetative phase and -30 kPa at the reproductive phase was observed in all methods of parameter determination for irrigation control. Water was saved as less irrigation was applied during the vegetative phase and more irrigation at the reproductive phase. No precipitation was observed from June to September 1995, leading to a high yield and therefore to a higher water use efficiency.
Resumo:
The ideal size precision of the foliar sample determines manual work optimization, and also diminishes inherent errors in diagnosis reports of nutritional state. This work aimed to determine the size of the foliar samples and the sample error variation in guava plantations submitted to two hydric cultivations for the nutritional state diagnosis of this fruit. The work included two studies, both under an entirely randomized experimental design. Study 1 was carried out in an orchard under unirrigated cultivation with four treatments and six repetitions that consisted of leaf collection in 5, 10, 20 and 40 plants. Study 2 was carried out in an orchard under irrigated cultivation with five treatments and 10 repetitions that consisted of leaf collection in 10, 20, 30, 40 and 50 guava plants. It was concluded that in unirrigated orchards it is necessary to sample leaves in 40 plants in order to keep the macronutrients sample error between 5 to 10%. For the micronutrients, on the other hand, at least 40 plants were necessary and, if Fe and Zn were considered, the sample must be even larger. In irrigated orchards, leaves deriving from 10 plants were enough to keep the sample error between 5 to 10%. However, considering the micronutrients, it was necessary to sample 20 guava plants.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The aims of this work were to show the pasture irrigation system by center pivot with Brazilian cattle and to discuss the economic feasibility of this technique in different regions of the country. Important parameters to dry matter production of tropical forage plants, as temperature, solar radiation, fertilization, and water requirement were shown Also, the system advantages and disadvantages and a discussion about economic feasibility of this technique were presented. It was concluded that pasture irrigation is a feasible and economical technique to some specific Brazilian regions, depending on appropriated parameters. This work also concludes that just water supply is not enough to assure forage production avoiding reduction in dry production in the winter.
Resumo:
The aim of this study was to evaluate the physico chemical characteristics of water quality for irrigation purposes in the micro basin of Coqueiro, a tributary on the right bank of the São José dos Dourados river, located between the municipalities of Jales, São Francisco, Palmeira d'Oeste and Dirce Reis, in the state of São Paulo, Brazil. Water samples were collected at five geo-referenced points along the stocam and analysed monthly for one year. The parameters analysed were: suspended and dissolved solids, turbidity, electrical conductivity, pH, calcium, magnesium, hardness and total iron. The result showed that the physico chemical parameters had the classification of medium potential for damage to the irrigation system, except total iron, which was classified as having medium to high potential for damage by clogging for localized irrigation systems.
Resumo:
The speed and magnitude of tropical pastures expansion in Brazil are related to the availability of quality seeds. This research aimed to evaluate the physiological quality of seeds of two Brachiaria species submitted to germination and viability tests and also estimate, for both species, the fresh and dry mass yield, under different irrigated crop-livestock integration systems. For field analysis, the experimental design was a randomized complete block, in subplots, with four intercrops in the plot (Brachiaria brizantha cv. Marandu and Brachiaria ruziziensis simultaneously established with corn and nitrogen fertilization coverage), and four forage cutting times, in the winter/spring season, in subplots, with four replications. In the laboratory, the experimental design was completely randomized, with four replications per treatment/test. The germination and viability tests indicated that B. brizantha seeds showed higher physiological quality, when compared with B. ruziziensis, while the tetrazolium test and germinated seedlings characteristics were similar. The B. ruziziensis, simultaneously intercropped with corn, was the less viable intercrop, due to the lower fresh and dry mass yield and litter deposition on the soil surface. In general, the pasture formation for the second season cultivation, intercropped with corn, was an excellent alternative for crop-livestock integration under a no-tillage system.
Resumo:
Knowledge about irrigated agricultural area and its geographical distribution are of great importance to water resources management. Evolution of irrigated area according to the irrigation method allows an identification of rational water technologies. The aim of this work was to analyze the information presented in the agricultural census of 1995/1996 and of 2006. Brazil has an area of 4.45 million cultivated hectares with irrigation. It is noticed that according to the 1995/1996 census, the irrigated area increased 1.3 million hectares, a growth of 42%. The Southeast region surpasses the South region which had, in 1995/96, the largest irrigated area. The Northeast region is the third irrigated agricultural area with 22.12 %, while the Central-west and the Northern region together sum 14.7%. According to the agricultural census 2006 classification, sprinkler irrigation (without center pivot) method is the most used,followed by flood, center pivot, other methods, drip and furrow, representing 35.3%, 24.4%, 18.9%, 8.3%, 7.4% and 5.8%, respectively.
Resumo:
This experiment was carried out to evaluate canopy height of guinea grass with 95% of photosynthetic active radiation interception and quantify the nitrogen fertilization influence and plants' density on the morphogenesis and structural characteristics of Tanzania grass. Four doses of N (0, 80, 160 e 320 kg.ha -1), were arranged with three plant densities (9, 25 and 49 plants.m -2), according to 4 × 3 completely randomized design, with three repetitions. Total dry matter (DM) accumulation throughout the experimental period was influenced by nitrogen fertilization and plants' density. In the rainy period, the higher nitrogen fertilization decreased the harvesting intervals, and consequently, increased the number of harvests. The rate of leaf appearance and the phyllochron were influenced only under nitrogen fertilization in the transition period of rainy and dry weather. Tanzania grass canopy height under 95% of light interception was positively influenced because of the plant densities in rainy period and transition period between rainy/drought and drought. Tanzania grass height under 95% of light interception presented variations along the evaluations and the values were higher (near 70 cm) in the rainy period, followed by transition period rain/drought and drought. © 2011 Sociedade Brasileira de Zootecnia.
Resumo:
O manejo de irrigação pode influenciar o comportamento ecofisiológico e a produção da videira. O objetivo desse trabalho, conduzido em 2010 em Petrolina – PE, no Submédio do Vale do São Francisco, foi avaliar a influência de diferentes estratégias de manejo de irrigação no potencial de água na folha e em aspectos qualitativos e quantitativos das uvas do primeiro ciclo de produção da videira cv. Syrah/Paulsen 1103. O sistema de irrigação utilizado foi gotejamento e a lâmina de água foi estimada com base na evapotranspiração da cultura. O delineamento experimental utilizado foi o de blocos casualizados, em 4 repetições e com 3 tratamentos: irrigação plena, realizada durante todo o ciclo de produção; a irrigação com déficit, onde a aplicação de água foi interrompida na fase fenológica de cacho fechado; e a irrigação com déficit controlado, onde a irrigação, também interrompida na fase de cacho fechado, foi eventualmente realizada após a interrupção, de acordo com o monitoramento da água no solo. A imposição de déficit hídrico às plantas favoreceu uma maior concentração de açúcares e a redução da acidez nos frutos, contribuindo para a melhoria da qualidade das uvas para vinificação.
Resumo:
The irrigation scheduling is basically the adoption of pre-established criteria to define the time and the amount of water to be applied through irrigation systems. Hence, the objective of this work was to develop and test a spreadsheet of easy comprehension, handling and interpretation by growers, which uses as inputs the physical-hydric soil attributes and tensiometer readings to the determination of irrigation depth and time. The spreadsheet enables the grower to make reading and to know in a fast way how much water to apply into the soil. The test of the spreadsheet was performed in an irrigated orchard of grapevines in Petrolina, State of Pernambuco, Brazil. Soil water retention curves and tensiometer readings from the effective rooting depth were used as a basis for obtaining the soil water matric potential, soil water content, water availability, soil water content to be replaced, net and gross irrigation depth and irrigation time. The analysis of the use of the irrigation scheduling spreadsheet resulted in a shorter time for irrigation in relation to the irrigation scheduling based only on the crop evapotranspiration. The spreadsheet can be helpful to growers adjust irrigation depth when irrigation scheduling is based only on crop evapotranspiration.
Resumo:
The use of irrigation systems that consume lower water and energy in agriculture is important to supply the growing global demand for food. In this way, it's important to develop techniques that will increase the uniformity of water application on drip irrigation systems. The aim of the work was to compare the provision of lateral lines in drip irrigation, through the formation of wet bulbs in soil and physical parameters of radish, composed of single spacing between drippers in relation to lateral lines composed of two segments, each one composed by different spacing between emitters. Two distributions of evaluation were carried out: 1) conventional drip lateral lines with 20 cm emitter spacing were compared to proposed drip lines, with 24 emitter spacing in the initial section and 20 cm emitter spacing in the final section; 2) conventional drip lateral lines with 30 cm emitter spacing were compared to proposed drip lines, with 36 emitter spacing in the initial section and 30 cm emitter spacing in the final section. The experiment was carried out in a greenhouse of the Sao Manuel Experimental Farm, located at Sao Manuel, SP. The experimental design was entirely randomized, with six treatments and four replications. Results showed no difference among treatments for the most of the evaluated variables. So it is possible to conclude that the use of different spacing between emitters in the same lateral line can be used to increase the line length.
Resumo:
The objective of this work was to analyze the most appropriate management to achieve higher productivity for carioca beans (phaseolus vulgaris) and pearll cultivar. The research was developed in the Demonstrative and Experimental Area of Irrigation (ADEI) of FCAV/UNESP, Campus of Jaboticabal, SP. Four treatments were used: T1- irrigation with base in ETo estimated by the method of Class A pan; T2- irrigations based on the readings of tensiometers installed at 0,20 m and 0,40 m of depth; T3- irrigations carried out with base in ETo estimated by the method of Penman-Monteith and T4- witness. The results were submitted to analysis of variance. To compare the averages the test Turkey was used at 5% of probability. The treatment T3 had smaller applied water depth than the treatments T1 and T2, and also smaller productivity. The conclusion is that the treatments irrigated with larger frequency showed higher production of grains.
Resumo:
The objective of this work was to evaluate the effect of different irrigation managements on flower induction and bloom of coffee trees. The study was carried out at the experimental area of the Engineering Department at Universidade Federal de Lavras, on Acaia Cerrado MG-1474 coffee cultivar, planted 3.0 meters between rows and 0.6 meters between plants and drip irrigated since planting in 1997. The experimental design was randomized blocks with 4 replicates and 5 irrigation treatment: A= non irrigated; B= irrigated throughout the whole year every time the water available was at most 25% of total available water (TAW); C= irrigated during the whole year every time the water available was at most 75% of TAW; D = treatment C during January, February, March, July, October, November and December and treatment B during April, May, June, August and September; E= treatment C during April, May, June, August and September. Each plot was composed of 10 plants and used 2 plants for the evaluation of secondary branches, number of flowers per flowering, number of fruit and fruit set between September and May during the growing seasons of 2006/2007 and 2007/2008. The different irrigation managements did not significantly influence the total number of flowers, number of branches and percentage of flowers that resulted in fruits. Comparing data from two harvests verified the biennial effect in the total number of flowers, percentage of fruit set and branch gain.
Resumo:
Mineral research works are fundamentals for recognition and incorporation of new reserves. This paper present an integrated analysis of geologic and metallogenetics data, with results gotten from the application of the Induced Polarization geophysical method, in an copper ore occurrence, inserted in Camaquã sedimentary basin, situated in northeast of Caçapava do Sul city (RS). In area ocurr arkosean arenites average coarse, the intensely silicified and recrystallized, pertaining to Passo da Promessa Formation. The presence of azurita and malachite in breakings and high porosity zones of the host rock characterizes the mineral occurrence in surface, located in the crossing two fault families. The inversion models indicate the predominance of high chargeability in vulcanics tuff, rock of high porosity in relation to the andesites and metaconglomerates gifts in the area. The strong structural control of the mineral occurrence associated the high chargeability in volcanic tuff is indications of the hydrothermal fluid access by means of faults, until rocks with great porosity, where it occurred disseminations of copper sulfides in depth and carbonates in surface.
Resumo:
There is much information on the adequate soil water matrix potential for returning irrigation in conventional soil tillage systems; however there is not enough information on the best soil water matrix potential for no-tillage production systems. This work aimed to study the effect of five irrigation levels on yield, soluble solids, and fruit acidity of the Hypeel tomato, cultivated for industrial processing and cropped on no-tillage system in Yellow Latosol. The experiment was carried out on a randomized block design with five treatments and four replications. The treatments consisted in different soil water matrix potentials for returning irrigation (m at 13cm of soil depth): -15, -30, -45, -60 and -75 kPa. The results obtained showed that the soil water matrix potential of -28.5 kPa resulted in maximum yields for tomato crop; whereas the value of -50.8 kPa resulted in the maximum fruit soluble solids concentration.