Impact of induction therapy on airway complications after sleeve lobectomy for lung cancer.

BACKGROUND: Sleeve lobectomy is a valid alternative to pneumonectomy for the treatment of centrally located operable non-small cell lung cancer (NSCLC), but concern has been evoked regarding a potentially increased risk of bronchial anastomosis complications after induction therapy. This study examined the impact of induction therapy on airway healing after sleeve lobectomy for NSCLC. METHODS: Bronchial anastomosis complications were recorded with respect to the induction regimen applied (neoadjuvant chemotherapy vs chemoradiotherapy) in a consecutive series of patients with sleeve lobectomy for NSCLC. RESULTS: Ninety-nine patients underwent sleeve resection, 28 of them after induction therapy. Twelve patients received chemotherapy alone, and 16 patients had radiochemotherapy. There were no significant differences in postoperative 90-day mortality (3.6% vs 2.8%) and morbidity (54% vs 49%) for patients with and without induction therapy. Bronchial anastomosis complications occurred in 3 patients (10.8%) with neoadjuvant therapy and in 2 (2.8%) without (p = 0.3). In the induction therapy group, two bronchial stenoses occurred after radiochemotherapy and one bronchopleural fistula after chemotherapy alone. In patients without induction therapy, one bronchial stenosis and one bronchopleural fistula were observed. All bronchial stenoses were successfully treated by dilatation, and both bronchopleural fistulas occurring after right lower lobectomy were successfully treated by reoperation and completion sleeve bilobectomy with preservation of the upper lobe. CONCLUSIONS: Sleeve lobectomy for NSCLC can be safely performed after induction chemotherapy and radiochemotherapy with mortality and incidence of airway complications similar to that observed in nonpretreated patients. The treatment of airway complications does not differ for patients with and without induction therapy.

Induction of p38, tumour necrosis factor-α and RANTES by mechanical stretching of keratinocytes expressing mutant keratin 10R156H.

Background : Epidermolytic hyperkeratosis (bullous congenital ichthyosiform erythroderma), characterized by ichthyotic, rippled hyperkeratosis, erythroderma and skin blistering, is a rare autosomal dominant disease caused by mutations in keratin 1 or keratin 10 (K10) genes. A severe phenotype is caused by a missense mutation in a highly conserved arginine residue at position 156 (R156) in K10. Objectives: To analyse molecular pathomechanisms of hyperproliferation and hyperkeratosis, we investigated the defects in mechanosensation and mechanotransduction in keratinocytes carrying the K10R156H mutation. Methods: Differentiated primary human keratinocytes infected with lentiviral vectors carrying wild-type K10 (K10wt) or mutated K10R156H were subjected to 20% isoaxial stretch. Cellular fragility and mechanosensation were studied by analysis of mitogen-activated protein kinase activation and cytokine release. Results: Cultured keratinocytes expressing K10R156H showed keratin aggregate formation at the cell periphery, whereas the filament network in K10wt cells was normal. Under stretching conditions K10R156H keratinocytes exhibited about a twofold higher level of filament collapse compared with steady state. In stretched K10R156H cells, higher p38 activation, higher release of tumour necrosis factor-alpha and RANTES but reduced interleukin-1 beta secretion compared with K10wt cells was observed. Conclusions: These results demonstrate that the R156H mutation in K10 destabilizes the keratin intermediate filament network and affects stress signalling and inflammatory responses to mechanical stretch in differentiated cultured keratinocytes.

The effect of positive airway pressure during pre-oxygenation and induction of anaesthesia upon duration of non-hypoxic apnoea

Résumé de l'étude. L'application d'une pression positive (PEEP) pendant la phase d'induction d'une anesthésie générale peut prévenir la formation d'atélectasies pulmonaires. Ceci pourrait permettre d'accroître la durée d'apnée non hypoxique par l'augmentation de la capacité pulmonaire résiduelle fonctionnelle (CRF). Nous avons étudié le bénéfice de l'application d'une PEEP durant la phase d'induction d'une anesthésie générale sur la durée d'apnée avant que la saturation périphérique en oxygène atteigne 90%. Quarante patients ASA I-II ont été randomisés en deux groupes distincts. - Dans le groupe PEEP (n=20), les patients ont été pré-oxygénés durant 5 minutes avec une Fi02 à l00% par l'intermédiaire d'un appareil de CPAP (6cmH2O). Après induction de l'anesthésie, les patients furent ventilés mécaniquement (PEEP 6cmH2O) durant 5 minutes supplémentaires. - Dans le groupe ZEEP (n=20), aucune pression positive (ni CPAP, ni PEEP) ne fut utilisée. La durée d'apnée pour atteindre une saturation périphérique de 90% fut mesurée. La durée d'apnée non hypoxique était plus longue dans le groupe PEEP par rapport au groupe ZEEP (599 +/- 135 s vs 470 +/- 150 s, p= 0,007). Nous concluons que l'application d'une pression positive durant la phase d'induction d'une anesthésie générale chez l'adulte prolonge la durée d'apnée non hypoxique de plus de 2 minutes.

Induction of transgenic hairy roots in soybean genotypes by Agrobacterium rhizogenes‑mediated transformation

The objective of this work was to perform the screening of soybean genotypes as to their ability to respond to the induction of hairy roots by Agrobacterium rhizogenes‑mediated transformation. Four Brazilian soybean cultivars (BRSMG 68 Vencedora, BRS 137, Embrapa 48, and MG/BR 46 Conquista) and two North American ones adapted to Brazilian cropping conditions (Bragg and IAS‑5) were screened for their capacity to respond to A. rhizogenes in protocols for in vitro hairy root culture and ex vitro composite plant production. Four‑day‑old seedlings with uniform size were injected with A. rhizogenes harboring the plasmid p35S‑GFP. Seedlings expressing green fluorescent protein (GFP) in at least one hairy root were used to determine the transformation frequency. Using an axenic in vitro protocol, excised cotyledons from four‑day‑old seedlings were infected with A. rhizogenes harboring the pCAMBIA1301 plasmid, containing the gusA reporter gene. The transformation frequency and the number of days for hairy root emergence after bacterial infection (DAI) were evaluated. The transformation frequency and DAI varied according to the genotype. Cultivars MG/BR 46 Conquista and BRSMG 68 Vencedora are more susceptible to A. rhizogenes and can be recommended for transformation experiments.

CD4+CD25+ T cell depletion impairs tolerance induction in a murine model of asthma.

BACKGROUND: Regulatory T cells (Tregs) are key players in controlling the development of airway inflammation. However, their role in the mechanisms leading to tolerance in established allergic asthma is unclear. OBJECTIVE: To examine the role of Tregs in tolerance induction in a murine model of asthma. METHODS: Ovalbumin (OVA) sensitized asthmatic mice were depleted or not of CD25(+) T cells by anti-CD25 PC61 monoclonal antibody (mAb) before intranasal treatment (INT) with OVA, then challenged with OVA aerosol. To further evaluate the respective regulatory activity of CD4(+)CD25(+) and CD4(+)CD25(-) T cells, both T cell subsets were transferred from tolerized or non-tolerized animals to asthmatic recipients. Bronchoalveolar lavage fluid (BALF), T cell proliferation and cytokine secretion were examined. RESULTS: Intranasal treatment with OVA led to increased levels of IL-10, TGF-beta and IL-17 in lung homogenates, inhibition of eosinophil recruitment into the BALF and antigen specific T cell hyporesponsiveness. CD4(+)CD25(+)Foxp3(+) T cells were markedly upregulated in lungs and suppressed in vitro and in vivo OVA-specific T cell responses. Depletion of CD25(+) cells before OVA INT severely hampered tolerance induction as indicated by a strong recruitment of eosinophils into BALF and a vigorous T cell response to OVA upon challenge. However, the transfer of CD4(+)CD25(-) T cells not only suppressed antigen specific T cell responsiveness but also significantly reduced eosinophil recruitment as opposed to CD4(+)CD25(+) T cells. As compared with control mice, a significantly higher proportion of CD4(+)CD25(-) T cells from OVA treated mice expressed mTGF-beta. CONCLUSION: Both CD4(+)CD25(+) and CD4(+)CD25(-) T cells appear to be essential to tolerance induction. The relationship between both subsets and the mechanisms of their regulatory activity will have to be further analyzed.

Prospective monitoring of a CD4(+) CD25(high) CD45RO(+) CD127(high) T cell population after first kidney transplantation following thymoglobulin or basiliximab induction

Introduction: Recent data have suggested that a population of CD4+ CD25high T cells, phenotypically characterized by the expression of CD45RO and CD127, is significantly expanded in stable liver and kidney transplant recipients and represents alloreactive T cells. Induction therapies may have an impact on this alloreactive T cell population. In this study, we prospectively analyzed CD4+ CD25high CD45RO+ CD127high T cells after induction with either thymoglobulin or basiliximab. Patients & methods: A total of twenty-seven kidney transplant recipients were prospectively enrolled; 14 received thymoglobulin induction followed by a 4-day course of steroids with tacrolimus and mycophenolate mofetil ("thymo group"), and 13 received basiliximab induction followed by standard triple immunosuppression (tacrolimus, mycophenolate mofetil and prednisone) ("BSX group"). Phenotypical analysis by flow cytometry of the expression of CD25, CD45RO and CD127 on peripheral CD4+ T cells was performed at 0, 3 and 6 months after transplantation. Twenty-four healthy subjects (HS) were studied as controls. Results: There were no differences in baseline characteristics between the groups; at 6 months, patient survival (100%), graft survival (100%), serum creatinine (thymo versus BSX group: 129 versus 125 μmol/l) and acute rejection (2/14 versus 2/13) were not significantly different. Thymo induction produced a strong CD4 T cell depletion. As compared to pre-transplantation values, an expansion of the alloreactive T cell population was observed at 3 months in both thymo (mean: from 6.38% to 14.72%) and BSX (from 8.01% to 18.42%) groups. At 6 months, the alloreactive T cell population remained significantly expanded in the thymo group (16.92 ± 2.87%) whereas it tended to decrease in the BSX group (10.22 ± 1.38%). Conclusion: Overall, our results indicate that the expansion of alloreactive T cells occurs rapidly after transplantation in patients receiving either thymo or BSX induction. Whether differences at later timepoints or whether different IS regimens may modify this alloreactive population remains to be studied.

Incidence of Infectious Complications in Kidney Transplant Recipients Receiving Induction with Basiliximab, Thymoglobulin or Both

Background: The possible additional risk of infection in patients receiving induction with both basiliximab (Ba) and thymoglobulin (Th) is unclear. We assessed the 1-year incidence of infectious complications in 3 groups of kidney transplant recipients according to the type of induction therapy received.Methods: We compared the incidence of infection at 1 year in 3 groups of patients at our institution: fi rst transplant recipients received Ba 20mg at days 0 and 4 (Group Ba); in case of retransplantation or if PRA was >20% patients received Th 1 mg/kg for 3-5 days (Group Th); in case of delayed graft function (DGF), Ba was discontinued and Th was initiated (Group Ba+Th) or prolonged in Group Th. Kaplan-Meier curves were used to calculate the incidence of infection. A Cox analysis was used to identify risk factors for the development of infection.Results: Over 5 years, 170 consecutive kidney transplant recipients were performed:n=113 in Group Ba, n=39 in Group Th and n=18 in Group Ba+Th. As expected, more patients in Group Th received a second transplant (p<0.001). No differences in CMV serostatus were observed between groups (p=0.9). Incidences of CMV infection, CMV disease, BK viremia, BK nephropathy and urinary tract infection (UTI) is shown in Table 1. Table 1 Group Ba (n=113) Group Th (n=38) Group Ba+Th (n=18) CMV infection 31 (27%) 20 (51%) 8 (44%) CMV disease 7 (6%) 4 (10%) 0 BK viremia 11 (8%) 5 (13%) 4 (22%) BK nephropathy 5 (4%) 1 (2%) 2 (11%) UTI 43 (38%) 23 (59%) 6 (33%) Incidences of infection according to type of induction In a multivariate model taking into account CMV serostatus, age, pretransplant dialysis, type of organ transplanted, number of transplants and type of induction, Group Ba carried a lower risk of CMV infection (OR 0.45, p=0.006), and UTI (OR=0.6, p=0.05), but there were no differences in CMV disease (p=0.38). There was a trend towards higher incidence of BK viremia, but not nephropathy in Group Ba+Th (OR 2.2, p=0.23). There were no signifi cant differences in kidney function or graft loss at 1 year between groups.Conclusion: By multivariate analysis, we observed a lower risk of CMV infection andUTI in patients receiving Ba. The group Ba+Th had a similar risk for infection than the group receiving Th alone. Larger studies are needed to clarify whether combining Ba+Th in the setting of DGF may increase the risk of infectious complications, in particular BK infection.

Influence of misoprostol or prostaglandin E(2) for induction of labor on the incidence of pathological CTG tracing: a randomized trial.

OBJECTIVE: To compare the efficacy and safety of misoprostol (prostaglandin E(1) (PGE(1))) with dinoprostone (prostaglandin E(2) (PGE(2))) for third trimester cervical ripening and labor induction. STUDY DESIGN: Patients requiring induction of labor were randomly assigned to receive either 50 microg of intravaginal misoprostol every 4 h or 0.5 mg of intracervical dinoprostone gel every 6 h. Eligibility criteria included gestation = 36 weeks. Primary outcome was the time interval from induction to delivery; secondary outcomes were mode of delivery, perinatal outcome, and interpretation of cardiotocogram (CTG) records. RESULTS: Two hundred women were randomly enrolled to receive either misoprostol (n = 100) or dinoprostone (n = 100). Time induction-to-delivery at 12, 24 and 48 h and the need for oxytocin were reduced with misoprostol (P < 0.05). Pathological CTG tracing according to FIGO and Melchior scores were more frequent in the misoprostol-treated group (P < 0.001). CONCLUSION: Misoprostol shortened the induction-to-delivery interval, but is associated with a higher incidence of abnormal CTG than prostaglandin E(2).

Role of CD4+CD25+ regulatory T cells in the antigen specific induction of tolerance "via" the nasal route

ABSTRACT Asthma is a complex inflammatory syndrome caused by environmental factors in predisposed individuals (atopics). Its severity correlates with the presence of activated T lymphocytes and eosinophils in the bronchoalveolar lavage fluid (BALF). Induction of tolerance via the nasal route results in reduced recruitment of eosinophils into BALF upon challenge, inhibition of TH2 pro-inflammatory cytokine secretion and T cell hyporesponsiveness. Recently, CD4+CD25+ natural regulatory T cells (Treg) were proposed as key players in controlling the development of asthma and allergic disease. The objective of the present study is to investigate the role of CD4+CD25+ regulatory T cells in the mechanisms leading to tolerance in an established model of asthma. In this goal we depleted CD4+CD25+ T cells at different times during asthma and tolerance induction protocol in mice and looked at efficiency of tolerization (intranasal application of high dose of allergen) in the absence of natural Tregs. First, ovalbumin-sensitized mice were depleted of CD25+ T cells by intraperitoneal injection of anti-CD25 mAb (PC61) either for along-term (repeated injections of anti-CD25 from day 31 until the end of the protocol) or a short-term period (single injection of anti-CD25 before or after tolerance induction). We demonstrated that the long-term depletion of CD4+CD25+ T cells severely hampered tolerance induction (marked enhancement in eosinophil recruitment into BALF and a vigorous antigen specific T cell response to OVA upon allergen challenge) whereas transient depletions were not sufficient to do so. We then characterized T cell subsets by flow cytometry and observed that a large part of CD4+CD25+ T cells express Foxp3, an established marker of regulatory T cells. We also tested in-vitro suppressor activity of CD4+CD25+ T cells from tolerized mice by cell proliferation assay in coculture and observed a strong suppressive activity. Our data suggest that CD4+CD25+ T cells with regulatory properties play a crucial role in the induction of tolerance via the nasal route. The relationship between CD25+ natural Treg and inducible IL-10+ TRl-type Treg will have to be defined. RESUME L'asthme est un syndrome inflammatoire complexe provoqué par des facteurs environnementaux chez des individus génétiquement prédisposés (atopiques). Sa sévérité corrèle avec la présence des lymphocytes T activés et d'éosinophiles dans le lavage bronchoalvéolaire (BAL). L'induction de la tolérance par la voie nasale résulte en une diminution du recrutement des eosinophils dans le BAL, une inhibition de la sécrétion de cytokines pro-inflammatoires de type TH2 et de l'hypo-réponse des cellules T à l'allergène. Récemment, les cellules régulatrices «naturelles » de type CD4+CD25+ T (Tregs) ont été proposées comme acteurs essentiels dans le développement de l'asthme et de l'allergie. L'objectif de cette étude est d'étudier le rôle des cellules régulatrices CD4+CD25+ T dans les mécanismes menant à la tolérance dans un modèle établi d'asthme. Dans ce but nous avons déplété les cellules de CD4+CD25+ T à différents temps au cours du protocole d'induction d'asthme et de tolérance et nous avons regardé l'efficacité de l'induction de tolérance (application intranasale d'une dose importante d'allergène) en l'absence de Tregs. Dans un premier temps des souris sensibilisées à l'ovalbumine (OVA) ont été déplétées en cellules CD25+ T par l'injection intrapéritonéale d'anti-CD25 mAb (PC61) pour une longue période (injections répétées d'anti-CD25 du jour 31 jusqu'à la fin du protocole) ou pour une courte période (injection unique d'anti-CD25 avant ou après l'induction de tolérance). Nous avons démontré que la déplétion à long t erme des cellules de CD4+CD25+ T a empêché l'induction de tolérance (recrutement accru d'éosinophiles dans le BAL et une réponse vigoureuse des cellules T spécifiques de l'antigène après exposition à l'allergène) tandis des déplétions à court-terme n'ont pas cet effet. Nous avons ensuite caractérisé des sous-populations de cellules T par cytométrie de flux. Nous avons observé que la majorité des cellules CD4+CD25+ T expriment Foxp3, un marqueur établi des cellules régulatrices. Nous avons également examiné in vitro l'activité régulatrice des cellules T CD4+CD25+ issues de souris tolérisées. La prolifération de cellules T en coculture a démontré une forte activité suppressive des cellules CD4+CD25+. Nos données suggèrent que des cellules T CD4+CD25+ ayant des propriétés régulatrices jouent un rôle crucial dans l'induction de la tolérance par la voie nasale. Le rapport entre les cellules régulatrices naturelles CD4+CD25+ et les cellules régulatrices inductible de type TR1 I1-10+ devra être défini. RESUME DESTINE A UN LARGE PUBLIC L'asthme est une maladie inflammatoire des bronches, caractérisée par des crises de dyspnée (gêne respiratoire) témoignant d'une activation brutale des muscles bronchoconstricteurs, auxquelles s'associent un oedème et une hypersécrétion des muqueuses des voies aériennes ainsi qu'une importante production d'anticorps de l'allergie (IgE). Chez la plupart des enfants atteints et chez près de la moitié des adultes concernés par l'asthme, c'est une allergie à des substances présentes dans l'air environnant (acariens, pollens ou poils d'animaux) qui est à l'origine de la maladie. . Le traitement actuel de l'asthme repose d'une part sur le soulagement des symptômes grâce à des produits à base de stéroïdes ou des bronchodilatateurs. D'autre part, l'immunothérapie spécifique (aussi appelée désensibilisation) permet d'améliorer l'asthme et de «reprogrammer» le système immunitaire. C'est à ce jour, le seul moyen connu de faire régresser une allergie. Cependant l'immunothérapie prend beaucoup de temps (3 à 5 ans) et ne marche pas à tous les coups ni pour tous les antigènes. Il est donc important de mieux comprendre les mécanismes impliqués lors d'un tel traitement afin d'en améliorer l'efficacité. Af n de pouvoir investiguer en détail ces mécanismes des modèles d'immunothérapie ont été mis au point chez la souris. Notre étude se base sur un modèle d'asthme allergique chez la souris. Des souris sont rendues allergiques à l'ovalbumine (OVA) et présentent alors les caractéristiques majeures de l'asthme humain (recrutement de cellules inflammatoires dans les poumons, augmentation de la production d'IgE et de la résistance des bronches aux flux respiratoires). Ces souris asthmatiques une fois traitées par l'application nasale d'OVA (forme d'immunothérapie muqueuse) ne développent plus de réaction allergique lors d'une ré-exposition à l'allergène. Notre hypothèse est que cette «guérison» (tolérance) est liée à l'action de cellules (lymphocytes T CD4) dites «régulatrices» et caractérisées par le marqueur CD25. Pour le démontrer, nous avons éliminé ces cellules «régulatrices» CD25 de nos souris asthmatiques grâce à un anticorps monoclonal spécifique. Nous n'avons dès lors plus été en mesure d'induire une tolérance à l'allergène. Ceci suggère donc un rôle clé des cellules «régulatrices» T CD4+CD25+ dans la réussite de l'immunothérapie nasale dans notre modèle. Nos résultats n'excluent pas la participation d'autres cellules telles que les lymphocytes producteurs d'IL-10 (lymphocytes régulateurs induits). Le rôle respectif de ces sous-populations régulatrices devra être examiné dans les études à venir. Une meilleure maîtrise des mécanismes de régulation pourrait s'avérer cruciale pour améliorer les thérapies de l'asthme.

Induction of cardiac Angptl4 by dietary fatty acids is mediated by peroxisome proliferator-activated receptor beta/delta and protects against fatty acid-induced oxidative stress.

RATIONALE: Although dietary fatty acids are a major fuel for the heart, little is known about the direct effects of dietary fatty acids on gene regulation in the intact heart. OBJECTIVE: To study the effect of dietary fatty acids on cardiac gene expression and explore the functional consequences. METHODS AND RESULTS: Oral administration of synthetic triglycerides composed of one single fatty acid altered cardiac expression of numerous genes, many of which are involved in the oxidative stress response. The gene most significantly and consistently upregulated by dietary fatty acids encoded Angiopoietin-like protein (Angptl)4, a circulating inhibitor of lipoprotein lipase expressed by cardiomyocytes. Induction of Angptl4 by the fatty acid linolenic acid was specifically abolished in peroxisome proliferator-activated receptor (PPAR)beta/delta(-/-) and not PPARalpha(-/-) mice and was blunted on siRNA-mediated PPARbeta/delta knockdown in cultured cardiomyocytes. Consistent with these data, linolenic acid stimulated binding of PPARbeta/delta but not PPARalpha to the Angptl4 gene. Upregulation of Angptl4 resulted in decreased cardiac uptake of plasma triglyceride-derived fatty acids and decreased fatty acid-induced oxidative stress and lipid peroxidation. In contrast, Angptl4 deletion led to enhanced oxidative stress in the heart, both after an acute oral fat load and after prolonged high fat feeding. CONCLUSIONS: Stimulation of cardiac Angptl4 gene expression by dietary fatty acids and via PPARbeta/delta is part of a feedback mechanism aimed at protecting the heart against lipid overload and consequently fatty acid-induced oxidative stress.

Hybrid model of a double-fed induction machine and back-to-back converter

This report details the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/AC converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM), coupled mechanically to a flywheel and electrically to the power grid and to a local varying load). Both subsystems have been essentially described in previous reports (deliverables D 0.5 and D 4.3.1), although some previously unpublished details are presented here. The B2B is a variable structure system (VSS), due to the presence of control-actuated switches: however from a modelling and simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond-graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presents and coupled through a power-preserving interconnection, and the Hamiltonian description of the whole system is obtained; detailed bond-graphs of all the subsystems and the complete system are provided.

Energy-based modelling and simulation of the interconnection of a back-to-back converter and a doubly-fed induction machine

This paper describes the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/CA converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM). The B2B is a variable structure system (VSS), due to presence of control-actuated switches: however, from a modelling simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presented and, using a power-preserving interconnection, the Hamiltonian description of the whole system is obtained; detailed bond graphs of all subsystems and the complete system are also provided. Using passivity-based controllers computed in the Hamiltonian formalism for both subsystems, the whole model is simulated; simulations are run to rest the correctness and efficiency of the Hamiltonian network modelling approach used in this work.

Performance Characteristics of an Axial-Flux Solid-Rotor-Core Induction Motor

The integration of electric motors and industrial appliances such as pumps, fans, and compressors is rapidly increasing. For instance, the integration of an electric motor and a centrifugal pump provides cost savings and improved performance characteristics. Material cost savings are achieved when an electric motor is integrated into the shaft of a centrifugal pump, and the motor utilizes the bearings of the pump. This arrangement leads to a smaller configuration that occupies less floor space. The performance characteristics of a pump drive can be improved by using the variable-speed technology. This enables the full speed control of the drive and the absence of a mechanical gearbox and couplers. When using rotational speeds higher than those that can be directly achieved by the network frequency the structure of the rotor has to be mechanically durable. In this thesis the performance characteristics of an axial-flux solid-rotor-core induction motor are determined. The motor studied is a one-rotor-one-stator axial-flux induction motor, and thus, there is only one air-gap between the rotor and the stator. The motor was designed for higher rotational speeds, and therefore a good mechanical strength of the solid-rotor-core rotor is required to withstand the mechanical stresses. The construction of the rotor and the high rotational speeds together produce a feature, which is not typical of traditional induction motors: the dominating loss component of the motor is the rotor eddy current loss. In the case of a typical industrial induction motor instead the dominating loss component is the stator copper loss. In this thesis, several methods to decrease the rotor eddy current losses in the case of axial-flux induction motors are presented. A prototype motor with 45 kW output power at 6000 min-1 was designed and constructed for ascertaining the results obtained from the numerical FEM calculations. In general, this thesis concentrates on the methods for improving the electromagnetic properties of an axial-flux solid-rotor-core induction motor and examines the methods for decreasing the harmonic eddy currents of the rotor. The target is to improve the efficiency of the motor and to reach the efficiency standard of the present-day industrial induction motors equipped with laminated rotors.

On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.