Regulating supply-chains to address the occupational health and safety problems associated with precarious employment: The case of home-based clothing workers in Australia

Over the past 20 years the labour market, workforce and work organisation of most if not all industrialised countries have been significantly refashioned by the increased use of more flexible work arrangements, variously labelled as precarious employment or contingent work. There is now a substantial and growing body of international evidence that many of these arrangements are associated with a significant deterioration in occupational health and safety (OHS), using a range of measures such as injury rates, disease, hazard exposures and work-related stress. Moreover, there is an emerging body of evidence that these arrangements pose particular problems for conventional regulatory regimes. Recognition of these problems has aroused the concern of policy makers - especially in Europe, North America and Australia - and a number of responses have been adopted in terms of modifying legislation, producing new guidance material and codes of practice and revised enforcement practices. This article describes one such in itiative in Australia with regard to home-based clothing workers. The regulatory strategy developed in one Australian jurisdiction (and now being ‘exported’ into others) seeks to counter this process via contractual tracking mechanisms to follow the work, tie in liability and shift overarching legal responsibility to the top of the supply chain. The process also entails the integration of minimum standards relating to wages, hours and working conditions; OHS and access to workers’ compensation. While home-based clothing manufacture represents a very old type of ‘flexible’ work arrangement, it is one that regulators have found especially difficult to address. Further, the elaborate multi-tiered subcont racting and diffuse work locations found in this industry are also characteristic of newer forms of contingent work in other industries (such as some telework) and the regulatory challenges they pose (such as the tendency of elaborate supply chains to attenuate and fracture statutory responsibilities, at least in terms of the attitudes and behaviour of those involved).

The implications of de‐collectivist industrial relations laws and associated developments for worker health and safety in Australia, 1996–2007

The institutional and regulatory interlinkages between industrial relations (IR) and occupational health and safety (OHS) are seldom explored in the IR literature. This article begins to address this gap by examining regulatory initiatives in Australia during a period of neoliberal government. It examines the laws enacted by the federal government during this period and events and cases arising from these laws that go some way to illustrating their effects. Evidence is also drawn from detailed research on a number of state OHS inspectorates between 2004 and 2006. It is argued that de-collectivist changes to IR laws exacerbated problems posed by the growth of flexible work arrangements and a drop in union density, weakening participatory provisions in OHS laws and promoting work arrangements that undermined OHS standards. The study provides evidence of the implications of a divergence in the trajectory of IR and OHS laws and the importance of better integrating worker protection laws.

Supply chain regulation to protect the occupational health and safety of vulnerable workers

The last two decades have witnessed a fragmentation of previously integrated systems of production and service delivery with the advent of boundary-less, networked and porous organisational forms. This trend has been associated with the growth of outsourcing and increased use of contingent workers. One consequence of these changes is the development of production/service delivery systems based on complex national and international networks of multi-tiered subcontracting increasingly labelled as supply chains. A growing body of research indicates that subcontracting and contingent work arrangements affect design and decision-making processes in ways that can seriously undermine occupational health and safety (OHS). Elaborate supply chains also present a regulatory challenge because legal responsibility for OHS is diffused amongst a wider array of parties, targeting key decision-makers is more difficult, and government agencies encounter greater logistical difficulties trying to safeguard contingent workers. In a number of industries these problems have prompted new forms of regulatory intervention, including mechanisms for sheeting legal responsibility to the top of supply chains, contractual tracking devices and increasing industry, union and community involvement in enforcement. After describing the problems just alluded to this paper examines recent efforts to regulate supply chains to safeguard OHS in the United Kingdom and Australia.

Australian health and safety inspectors’ perceptions and actions in relation to changed work arrangements

Extensive international research points to an association between changed work arrangements, especially those commonly labelled as contingent work, with adverse occupational health and safety (OHS) outcomes. Research also indicates these work arrangements have weakened or bypassed existing OHS and workers’ compensation regulatory regimes. However, there has been little if any research into how OHS inspectors perceive these issues and how they address them during workplace visits or investigations. Between 2003 and 2007 research was undertaken that entailed detailed documentary and statistical analysis, extended interviews with 170 regulatory managers and inspectors, and observational data collected while accompanying inspectors on 118 ‘typical’ workplace visits. Key findings are that inspectors responsible for a range of industries see altered work arrangements as a serious challenge, especially labour hire (agency work) and subcontracting. Though the law imposes clear obligations, inspectors identified misunderstanding/blameshifting and poor compliance amongst parties to these arrangements. The complexity of these work arrangements also posed logistical challenges to inspectorates.

Development of a new regulatory model for occupational health and safety in the New South Wales coal industry: an issues paper for the New South Wales Department of Mineral Resources

This paper addresses the regulatory issues arising in developing a new regulatory model for the New South Wales Coal Industry. As such, it identifies the relevant literature on this subject, the options available for reform, and the experience of Australian and key international bodies responsible for the development of regulatory standards in this area. In particular it: Identifies the main shortcomings in the existing regulatory approach; Identifies the potential roles/main strengths and weaknesses of different types of standards (eg specification, performance, process and systems-based rules) and potential “best practice’ combinations of standards; Examines the appropriateness of the current regulatory regime whereby the general OHS legislation (including the general duty provisions) applies to mining in addition to the large body of regulation which is specific to mining; Identifies the importance of, and possible means of addressing, issues of worker participation within the coal mining industry; Draws on the literature on what motivates companies and individuals for the purpose of recommending key provisions for inclusion in new legislation to provide appropriate personal and organisational incentives; Draws on the literature on major hazards facilities to suggest the appropriate roles for OHS management systems and safety reports or comparable approaches (eg mine safety management plans); Draws on the United Kingdom (UK) and United States of America (USA) experience of coal mine safety and its regulation for comparative purposes, and for insights as to what sort of regulation most effectively reduces work related injury and disease in coal mining; Examines the relevant roles of International Labour Organisation (ILO) Conventions; Examines the extent to which different regulatory regimes would be appropriate to open cut and underground coal mining; and Examines options for reform. This paper is focussed specifically on the issues identified above.

The court and the factory the legal construction of occupational health and safety offences in Victoria

This thesis reports on an empirically based study of the manner in which Victorian Magistrates Courts constructed occupational health and safety (OHS) issues when hearing prosecutions for offences under the Industrial Safety, Health and Welfare Act 1981 (the ISHWA) and the Occupational Health and Safety Act 1985 (OHSA) from 1983 to 1991. These statutes established OHS standards for employers and other relevant parties. The State government enforced these standards through an OHS inspectorate which had a range of enforcement powers, including prosecution. After outlining the historical development of Victoria’s OHS legislation, the magistracy’s historical role in its enforcement, and the development of an enforcement culture in which inspectors viewed prosecution as a last resort, the study shows how the key provisions of the ISHWA and OHSA required occupiers of workplaces and employers to provide and maintain safe systems of work, including the guarding of dangerous machinery. Using a wide range of empirical research methods and legal materials, it shows how the enforcement policies, procedures and practices of the inspectorate heavily slanted inspectors workplace investigations and hence prosecutions towards a restricted and often superficial, analysis of incidents (or “events”) most of which involved injuries on machinery. There was evidence, however, that after the establishment of the Central Investigation Unit in 1989 cases were more thoroughly investigated and prosecuted. From 1990 the majority of prosecutions were taken under the employer’s general duty provisions, and by 1991 there was evidence that prosecutions were focusing on matters other than machinery guarding.

Engaging expert contractors: The work health and safety obligations of the business or undertaking

This article examines the legal principles governing the statutory work health and safety general duties of principals who engage expert contractors to carry out work beyond the expertise of the principal. The article examines recent case law in which superior courts accepted the principal’s argument that the engagement of the expert contractor was sufficient to discharge the principal’s statutory work health and safety general duty. It then reframes the debate within the principles of systematic work health and safety management, and key provisions in the harmonised Work Health and Safety Acts—the primary duty of care; the key underpinning principles; the positive and proactive officer’s duty; and the horizontal duty of consultation, cooperation and coordination. It argues that it is likely that courts examining the issue of the principal’s work health and safety obligations under the harmonised Work Health and Safety Acts will require principals to do more to actively manage the work of expert contractors to ensure the health and safety of all workers and others potentially affected by the work.

Health and guardianship law : guardianship and administration application in the matter of MDC [2014] QCAT 338

The recent decision of the Queensland Civil and Administrative Tribunal (QCAT) in Guardianship and administration application in the matter of MDC [2014] QCAT 338, provides an important ruling on the limits of who can be appointed as an enduring power of attorney under the Powers of Attorney Act 1998 (Qld). In particular, the tribunal adopted a broad interpretation of the term "health provider" when considering the limits on who can be appointed as an enduring power of attorney under the legislation...

Competitive advantage through safety compliance : smaller firm responses to changes in the Australian occupational health and safety regulatory context

Smaller firms are often viewed as resistant to regulation due to cost burdens. However, evidence indicates that for some compliance is beneficial under certain conditions. Drawing on data on attitudes and responses of smaller firm owner-managers to changes in Australia’s harmonising work health and safety context we report on smaller firms’ responses to these changes. Despite uncertainty due to incomplete harmonisation, many owner-managers viewed safety compliance as important and necessary to do business. Those with negative views still linked positive safety performance to business outcomes. We categorise smaller firms’ responses and in this sample most are Positive Responders. We suggest ways forward for policy-makers to support smaller firms in complying with occupational health and safety regulation.

Adolescent peer aggression and its association with mental health and substance use in an Australian cohort

Prospective longitudinal birth cohort data was used to examine the association between peer aggression at 14 years and mental health and substance use at 17 years. A sample of 1590 participants from the Western Australian Pregnancy Cohort (Raine) study were divided into mutually exclusive categories (victims, perpetrators, victim-perpetrators and uninvolved). Involvement in any type of peer aggression as a victim (10.1%), perpetrator (21.4%), or a victim-perpetrator (8.7%) was reported by 40.2% of participants. After adjusting for confounding factors, those who were a victim of peer aggression had increased odds of later depression and internalising symptoms whilst perpetrators of peer aggression were found to be at increased risk of depression and harmful alcohol use. Victim-perpetrators of peer aggression were more likely to have externalising behaviours at 17 years. These results show an independent temporal relationship between peer aggression and later mental health and substance use problems in adolescence.

‘Ngulluck Katitj Wah Koorl Koorliny/ Us mob going along learning to research together’ : drawing on action research to develop a literature review on Indigenous gendered health and wellbeing

This paper describes the collaborative work practices of the Health and Wellbeing Node within the National Indigenous Research and Knowledges Network (NIRAKN). The authors reflect on the processes they used to research and develop a literature review. As a newly established research team, the Health and Wellbeing Node members developed a collaborative approach that was informed by Action Research practices and underpinned by Indigenous ways of working. The authors identify strong links between Action Research and Indigenous processes. They suggest that, through ongoing cycles of research and review, the NIRAKN Health and Wellbeing Node developed a culturally safe, respectful and trulycollaborative way of working together and forming the identity of their work group. In this paper, they describe their developing work processes and explain the way that pictorial conceptual models contributed to their emerging ideas.

Children’s physical activity, health and physical education in isolated rural contexts : the views of parent educators in Queensland

This paper describes the views of parent educators of their children’s levels and types of physical activity. The study was conducted at two mini-schools in western Queensland. These are occasion where students who undertake formal education through various Schools Distance Education, come together for a week of educational activity. Parents (mostly mothers) were interviewed using a semi-structured approach. The interview data were then analysed for dominant themes using a constant comparison method. The emergent themes related to nutrition and physical activity. Within the physical activity theme, notions of the great outdoors, work and organised sport skill development also emerged.

Porosity: Establishing the relationship between drying parameters and dried food quality [SpringerBriefs in Food, Health, and Nutrition]

The preservation technique of drying offers a significant increase in the shelf life of food materials, along with the modification of quality attributes due to simultaneous heat and mass transfer. Variations in porosity are just one of the microstructural changes that take place during the drying of most food materials. Some studies found that there may be a relationship between porosity and the properties of dried foods. However, no conclusive relationship has yet been established in the literature. This paper presents an overview of the factors that influence porosity, as well as the effects of porosity on dried food quality attributes. The effect of heat and mass transfer on porosity is also discussed along with porosity development in various drying methods. After an extensive review of the literature concerning the study of porosity, it emerges that a relationship between process parameters, food qualities, and sample properties can be established. Therefore, we propose a hypothesis of relationships between process parameters, product quality attributes, and porosity.