32 Gb/s multilevel modulation of an 850 nm VCSEL for next-generation datacommunication standards

An 850 nm vertical-cavity surface-emitting laser is modulated at 32 Gb/s using pulse-amplitude modulation with four levels. Transmitter predistortion generates an optimized modulation waveform, which requires a receiver bandwidth of only 15 GHz. © 2011 OSA.

Assessment of some physico-chemical parameters of River Ogun (Abeokuta, Ogun State, southwestern Nigeria) in comparison with national and international standards

This study assessed the physico-chemical quality of River Ogun, Abeokuta, Ogun state, Southwestern Nigeria. Four locations were chosen spatially along the water course to reflect a consideration of all possible human activities that are capable of changing the quality of river water. The water samples were collected monthly for seven consecutive months (December 2011 – June 2012) at the four sampling stations. pH, air temperature (℃), water temperature (℃), conductivity (µs/cm) and total dissolved solids (mg/L) were conducted in-situ with the use of HANNA Combo pH and EC multi meter Hi 98129 and Mercury-in-glass thermometer while dissolved oxygen (mg/L), nitrate (mg/L), phosphate (mg/L), alkalinity (mg/L) and hardness (mg/L) were determined ex-situ using standard methods. Results showed that dissolved oxygen, hydrogen ion concentration, total hardness and nitrate were above the maximum permissible limit of National Administration for Food, Drugs and Control (NAFDAC), Standard Organization of Nigeria (SON), Federal Environmental Protection Agency (FEPA), United States Environmental Protection Agency (USEPA), European Union (EU) and World Health Organization (WHO) for drinking water during certain months of the study period. Results also showed that water temperature and conductivity were within the permissible limits of all the standards excluding FEPA. However, total dissolved solids and alkalinity were within the permissible limits of all the standards. Adejuwon and Adelakun, (2012) also reported similar findings on Rivers Lala, Yobo and Agodo in Ewekoro local government area of Ogun state, Nigeria. Since most of the parameters measured were above the maximum permissible limits of the national and international standards, it can be concluded that the water is unfit for domestic uses, drinking and aquacultural purposes and therefore needs to be treated if it is to be used at all. The low dissolved oxygen values for the first four months was too low i.e. < 5 mg/L. This is most likely as a result of the amount of effluents discharged into the river. To prevent mass extinction of aquatic organisms due to anoxic conditions, proper regulations should be implemented to reduce the organic load the river receives.

Report on the 1993 IFAC World Congress standards and guidelines session

This brief note reviews five papers which were presented at the 1993 IFAC World Congress, on the theme 'standards and guidelines for computer-aided control engineering (CACE)'. This session was organized as part of the CACE Software Standardization Initiative, a combined effort of the IFAC and IEEE Control System Society committees on standards. The motivation of this report is to note the substantial progress that was made in this initiative, and to provide the basis for further discussion and work. The papers under review were concerned with integrated design environments, the use of the EXPRESS language for defining standard data structures, database management, user interfaces, and the modeling and simulation of hybrid systems.

Effects of iso-nitrogenous fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120-day long experiment was conducted to find out the effects of urea plus triple super phosphate (UT), cow manure (CM) and poultry manure (PM) having iso-nil:rogen content on pond productivity and fish yield. Three fertilizer treatments, with three replicates each, were randomly assigned into nine earthen ponds of 100 m2 each. The stocking fish were rohu (Labeo ruhita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha with the ratio of 1:1:1. All ponds were fertilized fortnightly at the rate of 125 kg/ha urea plus 100 kg TSP/ha, 7000 kg/ha cow manure and 3500 kg/ha poultry manure for the treatment of UT, CM and PM, respectively, having an iso-nitrogen content of 56 kg in each. Though the physicochemical water quality parameters were more or less similar in all treatment ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P < 0.05) in the ponds receiving the treatment PM. Final growth as well as per unit production of fish was significantly higher (p

Effects of iso-nitrogenous and iso-phosphorus fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120 day long experiment was conducted to find out the effects of cow manure with urea and triple super phosphate (CUT), poultry manure with urea and triple super phosphate (PUT) and cow manure with poultry manure (CP) having similar quantities of nitrogen and phosphorus on pond productivity and fish yield. The stocking fish were rohu (Labeo rohita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha. All ponds were fertilized fortnightly at the rate of 4000 kg/ha cow manure with 62 kg/ha urea and 65 kg/ha TSP, 2700 kg/ha poultry manure with 62 kg/ha urea and 16 kg/ha TSP, and 4000kg/ha cow manure with 2700 kg/ha poultry manure for the treatment CUT, PUT and CP respectively. Each treatment contained an iso-nitrogen and iso-phosphorus of 56 kg and 46 kg respectively. Though the physico-chemical parameters were more or less similar in all ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P< 0.05) in the ponds receiving the fertilizer treatment of PUT than those of other treatments. Final growth as well as per unit production of fish of treatment PUT (1773 kg/ha) was significantly higher (P< 0.05) than that of treatment CP (1528 kg/ha) followed by that of treatment CUT (1336 kg/ha). The over all results showed that poultry manure with urea and triple super phosphate proved to be superior to cow manure with urea and triple super phosphate, and poultry manure with cow manure, even when nitrogen and phosphorus content was similar, in carp polyculture system under prevailing conditions.

A method and tool for 'cradle to grave' embodied carbon and energy impacts of UK buildings in compliance with the new TC350 standards

As operational impacts from buildings are reduced, embodied impacts are increasing. However, the latter are seldom calculated in the UK; when they are, they tend to be calculated after the building has been constructed, or are underestimated by considering only the initial materials stage. In 2010, the UK Government recommended that a standard methodology for calculating embodied impacts of buildings be developed for early stage design decisions. This was followed in 2011-12 by the publication of the European TC350 standards defining the 'cradle to grave' impact of buildings and products through a process Life Cycle Analysis. This paper describes a new whole life embodied carbon and energy of buildings (ECEB) tool, designed as a usable empirical-based approach for early stage design decisions for UK buildings. The tool complies where possible with the TC350 standards. Initial results for a simple masonry construction dwelling are given in terms of the percentage contribution of each life cycle stage. The main difficulty in obtaining these results is found to be the lack of data, and the paper suggests that the construction and manufacturing industries now have a responsibility to develop new data in order to support this task. © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

32 Gb/s multilevel modulation of an 850 nm VCSEL for next-generation datacommunication standards

An 850 nm vertical-cavity surface-emitting laser is modulated at 32 Gb/s using pulseamplitude modulation with four levels. Transmitter predistortion generates an optimized modulation waveform, which requires a receiver bandwidth of only 15 GHz. © OSA/ CLEO 2011.

Developing ISO 14649-based conversational programming system for multi-channel complex machine tools

A multi-channel complex machine tool (MCCM) is a versatile machining system equipped with more than two spindles and turrets for both turning and milling operations. Despite the potential of such a tool, the value of the hardware is largely dependent on how the machine tools are effectively programmed for machining. In this paper we consider a shop-floor programming system based on ISO 14649 (called e-CAM), the international standard for the interface between computer-aided manufacture (CAM) and computer numerical control (CNC). To be deployed in practical industrial usage a great deal of research has to be carried out. In this paper we present: 1) Design consideration for an e-CAM system, 2) The architecture design of e-CAM, 3) Major algorithms to fulfill the modules defined in the architecture, and 4) Implementation details.

基于ISO/IEC 9126标准的软件质量评价系统

中国计算机学会

编码字符集标准及分类研究

编码字符集标准是计算机处理文字信息的基础,本文提出了编码字符集三元组抽象,对现有编码字符集标准进行了简单回顾和总结,深入剖析了影响巨大的ISO 2022标准及其派生标准,对ISO 2022编码机制应用于多语言环境的局限性进行了探讨,阐明了使用通用编码字符集UCS的必要性,并对其进行了分析.探讨了现有编码分类方法存在的问题,引入了一种对编码字符集以及实现方法进行分类的新方法,使用该方法对现有标准进行了归类;最后对汉字字符集相关的国家标准进行了分析评介.