405 resultados para IMS


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of the present study was to analyze the impact suffered by 40 people when discovering that one of their family members was diagnosed with cancer, to analyze their coping strategies and expectations towards the patient’s illness and future. The study made use of the Coping Strategies Inventory by Folkman and Lazarus. Results show that most of the patients’ caregivers are their married children, with an average age of 45.7 (dp=12.67), and gainfully employed. These family members reported the negative impact of the diagnosis, with the predominant feelings of sadness and fear of loss, even though they had a positive perspective about the future, expecting the patient’s recovery. As to the functional coping strategies, the most used were the resolution of problems, followed by social support; the least used was positive revaluation. As to the dysfunctional strategies, the most used ones were escape and avoidance and the least used was taking the responsibility for the illness. Conclusions are that despite suffering with the negative impact of the disease, the family members are optimistic about the patient’s future and seek to use strategies that solve the problem effectively, without blaming themselves for the patient’s illness.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work we study the behavior of the falling motion of neodymium magnets, inside conductive a metallic duct made of copper, aluminum, brass and bronze. We obtain, analyze and present results involving relationships between material and dynamical properties of falling neodymium magnets with the mechanical and electrical properties of conductive materials, such as mass, electrical resistivity, electrical conductivity, length and external diameter

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O presente trabalho faz uma análise de anúncios publicitários onde são utilizados elementos da folkcomunicação na construção da linguagem publicitária. Empregando a pesquisa bibliográfica e documental buscamos evidenciar quais são esses elementos e como eles são apropriados pela linguagem publicitária. Os conceitos da folkcomunicação, na área da publicidade, mostram que, na realidade, os “comunicadores folclóricos” traduzem os conteúdos complexos dos meios de comunicação de massa e os interpretam segundo valores tradicionais das camadas populares, conforme conceitos definidos por Luiz Beltrão. Essa tradução faz a aproximação com o público tão almejada pela publicidade, criando espaços de entendimento e de consumo dos bens ofertados. Nesta pesquisa, foi possível demonstrar como, em várias situações publicitárias, as apropriações dos conceitos folk são incorporados na e pela linguagem da publicidade.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Desde os anos 50, os fatores de risco para as doenças cardiovasculares passaram a ser valorizados. O gerenciamento de doenças cardiovasculares (PGC) busca a construção da autonomia e melhoria da qualidade de vida dos pacientes. Em alguns países, para alcançar esses objetivos, tem sido apontada a utilização de programas de pagamento por desempenho (PPP) aos médicos como um dos elementos de melhoria nos processos e nos resultados dos pacientes e na condição de remuneração. O objetivo deste estudo é analisar o ponto de vista dos médicos sobre a implantação dos pagamentos por desempenho vinculados ao PGC em uma operadora de plano de saúde. Trata-se de investigação de caráter qualitativo, do tipo estudo de caso, apresentando entrevistas semiestruturadas com médicos participantes ou não do PGC, em setembro de 2009, tendo como referência as ações implantadas em 2008. Foram entrevistados 23 médicos (14 homens e 09 mulheres). Como resultado foi observado que o incentivo financeiro é reconhecido pelos médicos como importante, mas não determinante da inclusão de pacientes no PGC. O principal motivo apresentado foi a organização do cuidado, no qual o paciente é mais bem acompanhado e controlado, e o trabalho médico, avaliado segundo parâmetros preestabelecidos. O PGC e o PPP têm potencial de transformação do cuidado em saúde. O trabalho multidisciplinar e a maior produtividade nos atendimentos no consultório foram os principais efeitos positivos identificados. Outros estudos são necessários para acompanhar a evolução e os efeitos do pagamento por desempenho no trabalho médico.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste artigo, situado no campo da comunicação em saúde, é analisar os sentidos atribuídos discursivamente à febre amarela silvestre durante a cobertura jornalística da epizootia da doença, ocorrida no Brasil no verão 2007-2008. Utilizando o referencial teórico das práticas discursivas e da produção de sentidos no cotidiano e as hipóteses de agendamento (agenda-setting) e enquadramento (framing) da notícia, foram analisadas todas as matérias sobre febre amarela veiculadas pelo jornal Folha de S. Paulo, no período de 21 de dezembro de 2007 a 29 de fevereiro de 2008, e todos os documentos oficiais sobre a epizootia emitidos pela autoridade brasileira de saúde pública entre 3 de janeiro e 28 de fevereiro de 2008. Os achados indicam que as estratégias discursivas da cobertura jornalística relativizaram o discurso da autoridade de saúde pública; priorizaram a divulgação do número de casos; enfatizaram a vacinação como o limite entre a vida e a morte, omitindo riscos do uso indiscriminado do imunobiológico; e propagaram a iminência de uma epidemia de febre amarela de grandes proporções. Essas estratégias deram novos sentidos à doença, deslocando o evento de sua forma silvestre, espacialmente restrita e de gravidade limitada, para a urbana, de caráter epidêmico e potencialmente mais grave. Secundariamente, o estudo permitiu identificar os impactos desse discurso midiático sobre o sistema nacional de imunização e os riscos a que a população foi exposta em função dos sentidos produzidos: em 2008, foram registrados 8 casos de reação grave à vacina, dos quais 6 foram a óbito.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

No Brasil, a saúde da família é uma estratégia de reorganização da atenção básica. Neste cenário, a coordenação da atenção, cuja essência é a disponibilidade de informações, apresenta-se como uma ferramenta para a qualificação das ações de saúde. Na Saúde da Família, o prontuário da família representa uma rica fonte de informações para a equipe de saúde desenvolver a coordenação da atenção. Os objetivos do estudo, descritivo com abordagem qualitativa, foram analisar o prontuário da família e seu conjunto informacional e identificar a "percepção" da equipe de saúde frente a sua sistematização, uso e importância para a coordenação e qualificação da atenção. Observou-se pequena padronização do registro da informação, da classificação e do arquivamento dos prontuários, além de pouco uso de seu conteúdo informacional. Notou-se que o emprego do prontuário da família para o exercício da coordenação não ocorreu a contento. Faz-se necessária uma melhor gestão deste documento, bem como sua efetiva utilização para favorecer a coordenação e a qualificação da atenção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este artículo reflexiona, desde una perspectiva interdisciplinar -sociología, antropología y psicoanálisis- sobre la práctica swinger en tanto estilo de vida en la ciudad de Cali, Colombia. Esta connotación de lo swinger, como una práctica que permite el establecimiento del lazo social con sentido, lleva a cuestionar una percepción moralizante y prejuiciosa de la misma, compartida no sólo por personas que la consideran como una transgresión del deber ser de la sexualidad, sino también por profesionales del campo "psi", que la califican como perversa. El texto discute ambas posturas, que parecen desconocer las inflexiones resultantes de las actuales transformaciones de la intimidad.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Since the first underground nuclear explosion, carried out in 1958, the analysis of seismic signals generated by these sources has allowed seismologists to refine the travel times of seismic waves through the Earth and to verify the accuracy of the location algorithms (the ground truth for these sources was often known). Long international negotiates have been devoted to limit the proliferation and testing of nuclear weapons. In particular the Treaty for the comprehensive nuclear test ban (CTBT), was opened to signatures in 1996, though, even if it has been signed by 178 States, has not yet entered into force, The Treaty underlines the fundamental role of the seismological observations to verify its compliance, by detecting and locating seismic events, and identifying the nature of their sources. A precise definition of the hypocentral parameters represents the first step to discriminate whether a given seismic event is natural or not. In case that a specific event is retained suspicious by the majority of the State Parties, the Treaty contains provisions for conducting an on-site inspection (OSI) in the area surrounding the epicenter of the event, located through the International Monitoring System (IMS) of the CTBT Organization. An OSI is supposed to include the use of passive seismic techniques in the area of the suspected clandestine underground nuclear test. In fact, high quality seismological systems are thought to be capable to detect and locate very weak aftershocks triggered by underground nuclear explosions in the first days or weeks following the test. This PhD thesis deals with the development of two different seismic location techniques: the first one, known as the double difference joint hypocenter determination (DDJHD) technique, is aimed at locating closely spaced events at a global scale. The locations obtained by this method are characterized by a high relative accuracy, although the absolute location of the whole cluster remains uncertain. We eliminate this problem introducing a priori information: the known location of a selected event. The second technique concerns the reliable estimates of back azimuth and apparent velocity of seismic waves from local events of very low magnitude recorded by a trypartite array at a very local scale. For the two above-mentioned techniques, we have used the crosscorrelation technique among digital waveforms in order to minimize the errors linked with incorrect phase picking. The cross-correlation method relies on the similarity between waveforms of a pair of events at the same station, at the global scale, and on the similarity between waveforms of the same event at two different sensors of the try-partite array, at the local scale. After preliminary tests on the reliability of our location techniques based on simulations, we have applied both methodologies to real seismic events. The DDJHD technique has been applied to a seismic sequence occurred in the Turkey-Iran border region, using the data recorded by the IMS. At the beginning, the algorithm was applied to the differences among the original arrival times of the P phases, so the cross-correlation was not used. We have obtained that the relevant geometrical spreading, noticeable in the standard locations (namely the locations produced by the analysts of the International Data Center (IDC) of the CTBT Organization, assumed as our reference), has been considerably reduced by the application of our technique. This is what we expected, since the methodology has been applied to a sequence of events for which we can suppose a real closeness among the hypocenters, belonging to the same seismic structure. Our results point out the main advantage of this methodology: the systematic errors affecting the arrival times have been removed or at least reduced. The introduction of the cross-correlation has not brought evident improvements to our results: the two sets of locations (without and with the application of the cross-correlation technique) are very similar to each other. This can be commented saying that the use of the crosscorrelation has not substantially improved the precision of the manual pickings. Probably the pickings reported by the IDC are good enough to make the random picking error less important than the systematic error on travel times. As a further justification for the scarce quality of the results given by the cross-correlation, it should be remarked that the events included in our data set don’t have generally a good signal to noise ratio (SNR): the selected sequence is composed of weak events ( magnitude 4 or smaller) and the signals are strongly attenuated because of the large distance between the stations and the hypocentral area. In the local scale, in addition to the cross-correlation, we have performed a signal interpolation in order to improve the time resolution. The algorithm so developed has been applied to the data collected during an experiment carried out in Israel between 1998 and 1999. The results pointed out the following relevant conclusions: a) it is necessary to correlate waveform segments corresponding to the same seismic phases; b) it is not essential to select the exact first arrivals; and c) relevant information can be also obtained from the maximum amplitude wavelet of the waveforms (particularly in bad SNR conditions). Another remarkable point of our procedure is that its application doesn’t demand a long time to process the data, and therefore the user can immediately check the results. During a field survey, such feature will make possible a quasi real-time check allowing the immediate optimization of the array geometry, if so suggested by the results at an early stage.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In Performance-Based Earthquake Engineering (PBEE), evaluating the seismic performance (or seismic risk) of a structure at a designed site has gained major attention, especially in the past decade. One of the objectives in PBEE is to quantify the seismic reliability of a structure (due to the future random earthquakes) at a site. For that purpose, Probabilistic Seismic Demand Analysis (PSDA) is utilized as a tool to estimate the Mean Annual Frequency (MAF) of exceeding a specified value of a structural Engineering Demand Parameter (EDP). This dissertation focuses mainly on applying an average of a certain number of spectral acceleration ordinates in a certain interval of periods, Sa,avg (T1,…,Tn), as scalar ground motion Intensity Measure (IM) when assessing the seismic performance of inelastic structures. Since the interval of periods where computing Sa,avg is related to the more or less influence of higher vibration modes on the inelastic response, it is appropriate to speak about improved IMs. The results using these improved IMs are compared with a conventional elastic-based scalar IMs (e.g., pseudo spectral acceleration, Sa ( T(¹)), or peak ground acceleration, PGA) and the advanced inelastic-based scalar IM (i.e., inelastic spectral displacement, Sdi). The advantages of applying improved IMs are: (i ) "computability" of the seismic hazard according to traditional Probabilistic Seismic Hazard Analysis (PSHA), because ground motion prediction models are already available for Sa (Ti), and hence it is possibile to employ existing models to assess hazard in terms of Sa,avg, and (ii ) "efficiency" or smaller variability of structural response, which was minimized to assess the optimal range to compute Sa,avg. More work is needed to assess also "sufficiency" and "scaling robustness" desirable properties, which are disregarded in this dissertation. However, for ordinary records (i.e., with no pulse like effects), using the improved IMs is found to be more accurate than using the elastic- and inelastic-based IMs. For structural demands that are dominated by the first mode of vibration, using Sa,avg can be negligible relative to the conventionally-used Sa (T(¹)) and the advanced Sdi. For structural demands with sign.cant higher-mode contribution, an improved scalar IM that incorporates higher modes needs to be utilized. In order to fully understand the influence of the IM on the seismis risk, a simplified closed-form expression for the probability of exceeding a limit state capacity was chosen as a reliability measure under seismic excitations and implemented for Reinforced Concrete (RC) frame structures. This closed-form expression is partuclarly useful for seismic assessment and design of structures, taking into account the uncertainty in the generic variables, structural "demand" and "capacity" as well as the uncertainty in seismic excitations. The assumed framework employs nonlinear Incremental Dynamic Analysis (IDA) procedures in order to estimate variability in the response of the structure (demand) to seismic excitations, conditioned to IM. The estimation of the seismic risk using the simplified closed-form expression is affected by IM, because the final seismic risk is not constant, but with the same order of magnitude. Possible reasons concern the non-linear model assumed, or the insufficiency of the selected IM. Since it is impossibile to state what is the "real" probability of exceeding a limit state looking the total risk, the only way is represented by the optimization of the desirable properties of an IM.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis presents a comparative developmental study of inflorescences and focuses on the production of the terminal flower (TF). Morphometric attributes of inflorescence meristems (IM) were obtained throughout the ontogeny of inflorescence buds with the aim of describing possible spatial constraints that could explain the failure in developing the TF. The study exposes the inflorescence ontogeny of 20 species from five families of the Eudicots (Berberidaceae, Papaveraceae-Fumarioideae, Rosaceae, Campanulaceae and Apiaceae) in which 745 buds of open (i.e. without TF) and closed (i.e. with TF) inflorescences were observed under the scanning electron microscope.rnThe study shows that TFs appear on IMs which are 2,75 (se = 0,38) times larger than the youngest lateral reproductive primordium. The shape of these IMs is characterized by a leaf arc (phyllotactic attribute) of 91,84° (se = 7,32) and a meristematic elevation of 27,93° (se = 5,42). IMs of open inflorescences show a significant lower relative surface, averaging 1,09 (se=0,26) times the youngest primordium size, which suggests their incapacity for producing TFs. The relative lower size of open IMs is either a condition throughout the complete ontogeny (‘open I’) or a result from the drastic reduction of the meristematic surface after flower segregation (‘open II’). rnIt is concluded that a suitable bulge configuration of the IM is a prerequisite for TF formation. Observations in the TF-facultative species Daucus carota support this view, as the absence of the TF in certain umbellets is correlated with a reduction of their IM dimensions. A review of literature regarding histological development of IMs and genetic regulation of inflorescences suggests that in ‘open I’ inflorescences, the histological composition and molecular activity at the tip of the IM could impede the TF differentiation. On the other side, in ‘open II’ inflorescences, the small final IM bulge could represent a spatial constraint that hinders the differentiation of the TF. The existence of two distinct kinds of ontogenies of open inflorescences suggests two ways in which the loss of the TF could have occurred in the course of evolution.rn

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Progetto SCATh allo ZHAW. Il dipartimento di meccatronica (IMS) dell'Università di scienze applicate di Winterthur (ZHAW), ha partecipato attivamente al progetto SCATh concentrandosi principalmente sullo sviluppo, il condizionamento, e la modellizzazione di un sensore di flusso che fosse facilmente applicabile e di piccole dimensioni in modo da poter essere applicato su catetere e permettere la misura diretta della grandezza fisica sopracitata. All'interno della struttura universitaria è stato possibile inizialmente analizzare il fenomeno che sta alla base del sensore, utilizzando conoscenze già presenti in dispositivi quali l'anemometria a filo caldo, che sfruttano lo scambio di calore tra sensore (riscaldato) e fluido sanguigno. La realizzazione del circuito di condizionamento è stato il passo successivo, necessario sia per mantenere il sensore ad una temperatura voluta e sia per leggere i dati di flusso mediante una tensione in uscita. Una volta effettuato ciò si è proceduto alla calibrazione del sensore (relazione tra flusso e tensione) ed infine alla trasposizione del circuito su LTspice. Nell' Introduzione (Capitolo 1) verranno presentati tutti i concetti preliminari, ossia i principi fisici, necessari a comprendere il funzionamento del sensore. Dunque dopo una breve definizione di flusso (riferito a liquidi) saranno presentati i principi di trasmissione del calore con particolare attenzione riservata alla convezione. Infine, parte dello stesso capitolo sarà dedicata ad una descrizione anatomica dell'aorta e dei rami collaterali. Successivamente nel secondo capitolo verrà analizzato, sia dal punto di vista statico che dal punto di vista dinamico, il circuito di condizionamento, ossia la circuiteria che sta a valle del sensore. Questo circuito permette al sensore di acquisire talune caratteristiche fondamentali per la misura di velocità ed inoltre consente la trasduzione da variabile fisica (velocità del flusso) a variabile elettrica (Tensione). In questo capitolo verrà inoltre fornita una descrizione delle relazioni matematiche fondamentali che legano la temperatura del sensore, la velocità del flusso e la tensione in uscita. Una descrizione del set sperimentale utilizzato per raccogliere dati sarà presente nel terzo capitolo. Qui si troverà una descrizione di tutte le attrezzature utilizzate al fine di poter testare il funzionamento del sensore. Nel quarto capitolo verranno visualizzati i risultati ottenuti facendo riferimento ai test effettuati prima su acqua e successivamente su sangue (suino). Verrà inoltre trovata la curva di calibrazione che permetterà di trovare una relazione biunivoca tra velocità del flusso e tensione in uscita. Infine, nel quinto capitolo verrà proposto un modello del circuito di condizionamento ottenuto mediante LTspice. Mediante il modello sarà possibile simulare un flusso di una velocità voluta e seguire l'andamento della tensione e della temperatura del sensore.