Perceptions of Technology and Manifestations of Language Learner Autonomy

a grounded theory study investigating perceptions of technology by learners of English as a second language

A Theory of Quantitative Inference Applied to a Mechanical Design Compiler

This thesis presents the ideas underlying a computer program that takes as input a schematic of a mechanical or hydraulic power transmission system, plus specifications and a utility function, and returns catalog numbers from predefined catalogs for the optimal selection of components implementing the design. Unlike programs for designing single components or systems, the program provides the designer with a high level "language" in which to compose new designs. It then performs some of the detailed design process. The process of "compilation" is based on a formalization of quantitative inferences about hierarchically organized sets of artifacts and operating conditions. This allows the design compilation without the exhaustive enumeration of alternatives.

Computer assisted instruction for developing speech perception skills in profoundly deaf children

This paper evaluates the usefulness of the "Foundations in Speech Perception" computer program developed by Breakthrough, Inc. in conjunction with Central Institute for the Deaf.

ExtSym: a program to aid space-group determination from powder diffraction data

Once unit-cell dimensions have been determined from a powder diffraction data set and therefore the crystal system is known (e.g. orthorhombic), the method presented by Markvardsen, David, Johnson & Shankland [Acta Cryst. (2001), A57, 47-54] can be used to generate a table ranking the extinction symbols of the given crystal system according to probability. Markvardsen et al. tested a computer program (ExtSym) implementing the method against Pawley refinement outputs generated using the TF12LS program [David, Ibberson & Matthewman (1992). Report RAL-92-032. Rutherford Appleton Laboratory, Chilton, Didcot, Oxon, UK]. Here, it is shown that ExtSym can be used successfully with many well known powder diffraction analysis packages, namely DASH [David, Shankland, van de Streek, Pidcock, Motherwell & Cole (2006). J. Appl. Cryst. 39, 910-915], FullProf [Rodriguez-Carvajal (1993). Physica B, 192, 55-69], GSAS [Larson & Von Dreele (1994). Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA], PRODD [Wright (2004). Z. Kristallogr. 219, 1-11] and TOPAS [Coelho (2003). Bruker AXS GmbH, Karlsruhe, Germany]. In addition, a precise description of the optimal input for ExtSym is given to enable other software packages to interface with ExtSym and to allow the improvement/modification of existing interfacing scripts. ExtSym takes as input the powder data in the form of integrated intensities and error estimates for these intensities. The output returned by ExtSym is demonstrated to be strongly dependent on the accuracy of these error estimates and the reason for this is explained. ExtSym is tested against a wide range of data sets, confirming the algorithm to be very successful at ranking the published extinction symbol as the most likely. (C) 2008 International Union of Crystallography Printed in Singapore - all rights reserved.

POP-11 comes of age: the advancement of an AI programming language

In 1989, the computer programming language POP-11 is 21 years old. This book looks at the reasons behind its invention, and traces its rise from an experimental language to a major AI language, playing a major part in many innovating projects. There is a chapter on the inventor of the language, Robin Popplestone, and a discussion of the applications of POP-11 in a variety of areas. The efficiency of AI programming is covered, along with a comparison between POP-11 and other programming languages. The book concludes by reviewing the standardization of POP-11 into POP91.

A computer study of the improvement of PV panel monthly outputs when the panel azimuth is changed thrice daily

The purpose of the calculations was to estimate the most suitable slopes and azimuths for three different positions per day of a solar panel in order to obtain the most possible energy from the PV panel compared with a stationary PV panel. The calculations were made in the computer program PV F-CHART.

A systematic grounded approach to the development of complex interventions : The Australian WorkHealth Program – Arthritis as a case study

Despite demands for evidence-based research and practice, little attention has been given to systematic approaches to the development of complex interventions to tackle workplace health problems. This paper outlines an approach to the initial stages of a workplace program development which integrates health promotion and disease management. The approach commences with systematic and genuine processes of obtaining information from key stakeholders with broad experience of these interventions. This information is constructed into a program framework in which practice-based and research-informed elements are both valued. We used this approach to develop a workplace education program to reduce the onset and impact of a common chronic disease – osteoarthritis.

To gain information systematically at a national level, a structured concept mapping workshop with 47 participants from across Australia was undertaken. Participants were selected to maximise the whole-of-workplace perspective and included health education providers, academics, clinicians and policymakers. Participants generated statements in response to a seeding statement: Thinking as broadly as possible, what changes in education and support should occur in the workplace to help in the prevention and management of arthritis? Participants grouped the resulting statements into conceptually coherent groups and a computer program was used to generate a ‘cluster map’ along with a list of statements sorted according to cluster membership.

In combination with research-based evidence, the concept map informed the development of a program logic model incorporating the program's guiding principles, possible service providers, services, training modes, program elements and the causal processes by which participants might benefit. The program logic model components were further validated through research findings from diverse fields, including health education, coaching, organisational learning, workplace interventions, workforce development and osteoarthritis disability prevention.

In summary, wide and genuine consultation, concept mapping, and evidence-based program logic development were integrated to develop a whole-of-system complex intervention in which potential effectiveness and assimilation into the workplace for which optimised.

The "strugglers" in selected computer based mathematics classrooms

In this paper, the experiences of lower achieving mathematics students in two secondary mathematics classrooms in which computers were regularly used are described. A year 8 and a year 9 mathematics class from one secondary school participated in the ethnographic study. The results show that in these two classrooms the learning relationships and power relationships did not, in general, support the learning and engagement of lower achievers in mathematics. Research into computer based teaching methods that engage low achieving students in computer based mathematics is needed.

SAS macros for point and interval estimation of area under the receiver operating characteristic curve for non-proportional and proportional hazards Weibull models

Aims and objectives  For prediction of risk of cardiovascular end points using survival models the proportional hazards assumption is often not met. Thus, non-proportional hazards models are more appropriate for developing risk prediction equations in such situations. However, computer program for evaluating the prediction performance of such models has been rarely addressed. We therefore developed SAS macro programs for evaluating the discriminative ability of a non-proportional hazards Weibull model developed by Anderson (1991) and that of a proportional hazards Weibull model using the area under receiver operating characteristic (ROC) curve.

Method  Two SAS macro programs for non-proportional hazards Weibull model using Proc NLIN and Proc NLP respectively and model validation using area under ROC curve (with its confidence limits) were written with SAS IML language. A similar SAS macro for proportional hazards Weibull model was also written.

Results  The computer program was applied to data on coronary heart disease incidence for a Framingham population cohort. The five risk factors considered were current smoking, age, blood pressure, cholesterol and obesity. The predictive ability of the non-proportional hazard Weibull model was slightly higher than that of its proportional hazard counterpart. An advantage of SAS Proc NLP in terms of the example provided here is that it provides significance level for the parameter estimates whereas Proc NLIN does not.

Conclusion  The program is very useful for evaluating the predictive performance of non-proportional and proportional hazards Weibull models.

The role of the computer in learning ndjébbana

While Computer Assisted Language Learning (CALL) is being superseded by an integrated approach to language learning and technology, it still has great potential to assist indigenous peoples in becoming print-literate in their own languages. This can also help to combat the disempowerment experienced by indigenous people as their world is penetrated by others with radically different backgrounds. This paper reports on research on an application of CALL implemented among the Kunibídji, a remote, indigenous Australian community. It focuses on the use of talking books in Ndjébbana, a language with only 200 speakers; the books were displayed on touch-screens at various locations in the community. Investigations into the roles of the computer to support language learning and cultural understanding are also reported. The computer was found to be a useful tool in promoting Kunibídji collaboration and cultural transformation.

PhotoLin: a program to identify and analyze linear structures in aerial photographs, satellite images and maps

A computer program, PhotoLin, written for an IBM-PC-compatible microcomputer is described which detects linear features in aerial photographs, satellite images and topographic maps. The program accepts images saved to PCX files as input and applies noise correction and smoothing filters and thinning routines. The output consists of a skeleton containing the median lines of linear features which can be represented on a map. The branches of the skeleton can be broken into sections of constant length for which the mean orientations are obtained for the preparation of rose diagrams. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Representacao grafica de dados multidimensionais com o auxilio de microcomputador

Software in BASIC (GWBASIC, version 2.0) and TURBO PASCAL (version 3.0) is presented for PC type microcomputers with the purpose of calculating the graphical method for multivariate data according to Andrews. Applying both softwares to data from the Irati Formation mesossaurides skull measures, in velocity and graphical quality, the TURBO PASCAL language performed better. -after English summary

Aplicacao de metodo computacional para representacao de relevo pelo metodo de Wentworth

This piece of work focuses the application of a computational method to obtain clinographic maps, by using C.K. Wentworth's method. The developed program to construct the clinographic maps is completely structured in Basic Language and it uses Line PC Micro-Computers. As an exercise for practical application, in this study we defined a certain region, where the topographic base map is that of Brazil, 1:250 000 scale, Marilia contour map, having as the study area the region near the city of Assis (SP). -English summary

As criações neológicas apresentadas por José Simão no jornal Folha de São Paulo

Pós-graduação em Estudos Linguísticos - IBILCE

Desenvolvimento e teste de um programa computacional para simulação de plantas térmicas e de potência

Pós-graduação em Engenharia Mecânica - FEIS