A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel

The ability of large-grain (RE)Ba2Cu3O7-δ ((RE)BCO; RE = rare earth) bulk superconductors to trap magnetic fields is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two silver-doped GdBCO superconducting bulk samples, each 25 mm in diameter, fabricated by top-seeded melt growth and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement, and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source. © 2014 IOP Publishing Ltd.

Cancer subtypes recognition and its gene expression profiles analysis based on geometrical learning

The accurate recognition of cancer subtypes is very significant in clinic. Especially, the DNA microarray gene expression technology is applied to diagnosing and recognizing cancer types. This paper proposed a method of that recognized cancer subtypes based on geometrical learning. Firstly, the cancer genes expression profiles data was pretreated and selected feature genes by conventional method; then the expression data of feature genes in the training samples was construed each convex hull in the high-dimensional space using training algorithm of geometrical learning, while the independent test set was tested by the recognition algorithm of geometrical learning. The method was applied to the human acute leukemia gene expression data. The accuracy rate reached to 100%. The experiments have proved its efficiency and feasibility.

Design Study of a Heavily Loaded Ice Class Propeller Using an Advance Panel Method

A design and optimization procedure developed and used for a propeller installed on a twin-semitunnel-hull ship navigating in very shallow and icy water under heavy load conditions is presented. The base propeller for this vessel was first determined using classic design routines under open-water condition with existing model test data. In the optimization process, a panel method code (PROPELLA) was used to vary the pitch values and distributions and take into account the inflow wake distribution, tunnel gap, and cavitation effects. The optimized propeller was able to improve a ship speed of 0.02 knots higher than the desired speed and 0.06 knots higher than the classic B-series propeller. The analysis of the effect of inflow wake, hull tunnel, cavitation, and blade rake angle on propulsive performance is the focus of this paper.

青稞B组醇溶蛋白基因与上游调控区的克隆及基因表达

高等植物种子胚乳贮藏蛋白是种子发芽时的主要氮源，也是人类和动物食用植物蛋白的主要来源。大麦种子胚乳贮藏蛋白主要是醇溶蛋白（hordeins），占大麦胚乳总蛋白的50–60%。根据大麦醇溶蛋白的大小和组成特点，大麦醇溶蛋白被划分为三种类型：富硫蛋白亚类(B，γ-hordeins)、贫硫蛋白亚类（C-hordeins)以及高分子量蛋白亚类(D-hordeins)。B组和C组醇溶蛋白是大麦胚乳的两类主要贮藏蛋白，它们分别占大麦总醇溶蛋白成分的70–80%和10–12%。遗传分析表明，大麦B、C、D和γ-组醇溶蛋白分别是由位于大麦第五染色体1H（5）上的Hor2、Hor1、Hor3和Hor5位点编码。Hor2位点编码大量分子量相同但组成不同的B组醇溶蛋白（B-hordein）。B-hordein的种类、数量和分布是影响大麦酿造、食用及饲养品质的重要因素之一。为深入了解B-hordein基因家族的结构和染色体组织，探明Hor2位点基因表达的发育调控机制，最终达到改良禾谷类作物籽粒品质的目的，本研究以青藏高原青稞为材料，采用同源克隆法，分别克隆B-hordein基因和启动子，通过原核生物表达验证B-hordein基因功能，并利用实时定量PCR探索B-hordein基因表达时空关系，取得如下研究结果： 1. 以具有特殊B组醇溶蛋白亚基组成的9份青藏高原青稞为材料，根据GenBank中三个B-hordein基因序列（GenBank No. X03103, X53690和X53691）设计一对引物，通过PCR扩增，获得23个B-hordein基因克隆并对其进行了序列分析。核苷酸序列分析表明，所有克隆均包含完整的开放阅读框。有11个克隆都存在一个框内终止密码子，推测这11个克隆可能是假基因。推测的氨基酸序列分析表明，所有大麦B-hordein具有相似的蛋白质基本结构，均包括一个高度保守的信号肽、中间重复区以及C-端结构域。不同大麦种重复区内重复基元的数目有较大差异。青稞材料Z07–2和Z26的B-hordeins仅具有12个重复基元结构，更接近于野生大麦。这些重复基元数目的差异导致了重复区序列长度和结构的变异。这种现象极可能是由于醇溶谷蛋白基因在进化过程中染色体的不平衡交换或复制滑动所造成的。对所克隆基因和禾本科代表性醇溶谷蛋白基因进行聚类分析，结果表明所有来自栽培大麦的B-hordeins聚类成一个亚家族，来自野生大麦的B-hordeins以及普通小麦的LMW-GS聚类成另外一个亚家族，表明这两个亚家族的成员存在显著差异。此外，我们发现B-hordein基因推测的C-末端序列具有一些有规律的特征：即具有相同C-末端序列的B-hordein基因在系统发生树中聚类为同一个亚组（除BXQ053，BZ09-1，BZ26-5分别单独聚为一类外）。这个特征将有助于我们对所有B组醇溶蛋白基因家族成员进行分类，避免了在SDS-PAGE电泳图谱上仅依靠大小分类的局限性。 2. 根据上述克隆的青稞B-hordein基因的5’端序列设计三条基因特异的反向引物，以青稞Z09和Z26的基因组DNA为模板，采用SON-PCR和TAIL-PCR技术分离克隆出8个B-hordein基因的上游调控序列（命名为Z09P和Z26P）。序列分析表明，推测的TATA box位于–80 bp，CAAT–like box位于–140 bp处。此外，Z09P和Z26P中有六个序列在–300 bp处均存在一个由高度保守的EM基序和类GCN4基序构成的胚乳盒(Endosperm Box，EB)，在约–560 bp处存在一个胚乳盒类似结构。而Z09P-2和Z26P-3不存在保守的胚乳盒或其类似结构，预示着这两个启动子所调控的基因表达可能受不同类型反式作用因子的调节，推测该启动子对基因的表达调控具有多样性。 3. 将B-hordein基因的开放阅读框定向克隆到表达载体pET-30a中，将其导入大肠杆菌表达菌株BL21中进行外源基因的诱导表达以验证所克隆基因的功能。结果表明仅含重组子pET-BZ07-2和pET-BZ26-5的BL21细菌有目的表达蛋白产生。在诱导3 h时的蛋白表达量最高；3 mM IPTG诱导的蛋白表达量要高于1 mM IPTG诱导的表达量。这为分离纯化B-hordein蛋白以及进一步研究其对大麦籽粒品质的影响奠定基础。 4. 根据从青稞Z09和Z26中分离克隆的B-hordein基因序列设计一对基因特异的引物，同时，选择大麦α-微管蛋白基因（GenBank no. U40042）为看家基因并设计特异引物，利用实时荧光定量PCR检测了青稞籽粒4个胚乳发育时间段的B-hordein基因表达，荧光定量结果显示：两份材料中B-hordein基因的表达量均随发育过程的进行而逐渐升高。Z09中B-hordein基因在开花后7天开始转录，而Z26开花4天后就有低水平B-hordein的表达，这表明Z26中B-hordein基因可能比Z09表达的较早或者Z09中B-hordein基因表达水平较低以致于不能被检测到。此外，在4个不同的胚乳发育时期中，Z26中B-hordein基因的表达量均高于Z09材料。在开花12天到18天的过程中，Z09和Z26中B-hordein基因的表达水平有一个急剧性的升高。这说明在不同胚乳发育时期，Hor2位点的B-hordein等位基因变异体存在mRNA的差异表达。 Seed endosperm storage proteins in higher plants are the main resources of nitrogen for germinating and plant proteins for human and animals. Barley prolamins (also called hordeins) are the major storage proteins in the endosperm and account for 50–60% of total proteins. Hordeins are classically divided into three groups: sulphur-rich (B, γ-hordeins), sulphur-poor (C-hordeins) and high molecular weight (HMW, D-hordeins) hordeins based on the size and composition. B-hordeins and C-hordeins are two major groups and each respectively account for about 70-80% and 10-12% of the total hordein fraction in barley endosperm. Genetic analysis showed that B-, C-, C-, γ-hordeins are encoded by Hor2, Hor1, Hor3 and Hor5 locus on the chromosome 1H (5). Hor2 locus is rich in alleles that encode numerous heterogeneous B-hordein polypeptides. It is reported that B-hordein species, quantity and distribution are significant factors affecting malting, food and feed quality of barley. To understand comprehensively the structure and organization of B-hordein gene family in hull-less barley and explore the developmental control mechanisms of Hor2 locus gene expression and eventually to better exploitation in crop grain quality improvement, we isolated and cloned B-hordein genes and promotors of hull-less barley from Qinghai-Tibet Plateau by PCR, and testified their expression founction in bacteria expression system and explore their spatial and temporal expression pattern by quantitative real time PCR. Our results are as followed, 1. Twenty-three copies of B-hordein gene were cloned from nine hull-less barley cultivars of Qinghai-Tibet Plateau with special B-hordein subunits and molecularly characterized by PCR, based on three B-hordein genes published previously (GenBank No. X03103, X53690 and X53691). DNA sequences analyses confirmed that the six clones all contained a full-length coding region of the barley B-hordein genes. Eleven clones all contain an in-frame stop codon and they are probably pseudogenes. The analysis of deduced amino acid sequences of the genes shows that they have similar structures including signal peptide domain, central repetitive domain, and C-terminal domain. The number of the repeats was largerly variable and resulted in polypeptides in different sizes or structures among the genes. Twelve such repeated motifs were found in Z07–2 and Z26, and they are close to those of the wild barleys, and it is most probably caused by unequal crossing-over and/or slippage during replication as suggested for the evolution of other prolamins. The relatedness of prolamin genes of barley and wheat was assessed in the phylogenetic tree based on their polypeptides comparison. Our phylogenetic analysis suggested that the predicted B-hordeins of cultivated barley formed a subfamily, while the B-hordeins of wild barleys and the two most similar sequences of LMW-GS of T. aestivum formed another subfamily. This result indicated that the members of the two subfamilys have a distinctive difference. In addition, we found the B-hordeins with identical C-terminal end sequences were clustered into a same subgroup (except BXQ053，BZ09-1 and BZ26-5 as a sole group, respectively), so we believe that B-hordein gene subfamilies possibly can be classified on the basis of the conserved C-terminal end sequences of predicted polypeptide and without the limit of SDS-PAGE protein banding patterns. 2. The specific primers were designed according to the published sequences of barley B-hordein genes from Z09 and Z26. Using total DNA isolated from them as the templates, eight clones (designated Z09Pand Z26P) of upstream sequences of the known B-hordein genes was obtained by TAIL-PCR and SON-PCR. Sequences analysis shows that the putative TATA box was present at position –80 bp and CAAT-like box at position –140 bp. Besides, a putative Endosperm Box including an Endosperm Motif (EM) and a GCN4-Like Motif was found at position –300 bp in six clones, and another Endosperm-like box was found at positon –560 bp. While the Endosperm Box or Endosperm-like box was not found in Z09P-2 and Z26P-3. This may indicate that gene expression drived by the two promtors was probably controlled by different trans-acting factors and the genetic control mechanism of corresponding gene expression may be diverse. 3. The B-hordein genic region coding for the mature peptide was cloned into expression vector pET-30a and transformed into bacterial strain BL21 for identifying gene expression fountion. Protein SDS–PAGE analysis showed that only the transformed lysate with the pET-BZ07-2 and pET-BZ26-5 constructs produced proteins related to B-group hordeins of barley, and the mounts of proteins induced by 3 mM IPTG and 3 h were higher than other conditions. This established a base for isolating and putifying B-hordein and further exploring their effects on barley grain quality. 4. The gene-specific primers of B-hordein genes from Z09 and Z26 were used for the quantification of B-hordein gene expression. The α-tubulin gene from Hordeum vulgare subsp. vulgare (GenBank accession number U40042) was used as a control gene. The result shows the transcription of the B-hordein genes in Z09 was found 7 days after flowering, while the transcription of the B-hordein genes in Z26 was found 4 days after flowering, but at a very low level, and it suggested that the B-hordein genes in Z26 probably expressed earlier than those in Z09, or the B-hordein genes in Z09 expressed at so a lower level than Z26 that it can not detected. In addition, B-hordein genes in Z26 accession showed higher expression levels than those in Z09 in four developing stages. Furthermore, a progressive increase in the expression levels of the B-hordein genes between 12 and 18 days after anthesis was observed in both Z09 and Z26. It implies that the B-hordein allelic variants encoded by Hor2 locus exist the differential expression in mRNA levels of during barley endosperm development.

中国青藏高原青稞抗穗发芽资源评价与α-淀粉酶基因的克隆及表达

穗发芽（PHS，preharvest sprouting）是影响禾本科作物生产的重要的灾害之一。收获时期如遇潮湿天气容易导致穗发芽发生。发生穗发芽的种子内部水解酶（主要是α-淀粉酶）活性急剧升高，胚乳贮藏物质开始降解，造成作物产量和品质严重降低。因此，选育低穗发芽风险的品种是当前作物育种工作中面临的重要任务。 青稞(Hordeum vulgare ssp. vulgare)主要分布于青藏高原，自古以来就是青藏高原人民的主要粮食。近年来，由于青稞丰富的营养成分和特有的保健品质、在燃料工业中的潜力以及在啤酒酿造工业中的利用前景，在发达国家日趋受到重视，掀起综合研究利用的热潮。我国拥有占全世界2/3 以上的青稞资源，具有发展青稞产业的得天独厚的条件。然而，由于青稞收获期间恰逢青藏高原雨季来临，常有穗发芽灾害发生，使青稞生产损失巨大。目前对青稞穗发芽研究很少，适用于育种的穗发芽抗性材料相对缺乏，不能很好的满足青稞穗发芽抗性育种的需要。本研究以青藏高原青稞为材料，对其穗发芽抗性的评价指标和体系进行构建，同时筛选青稞抗穗发芽品种并对其抗性进行评价，还利用分子生物学手段对青稞穗发芽抗性的分子机理进行了初步探讨。主要研究结果如下： 1. 本试验以来自于我国青藏高原地区的青稞为材料，对休眠性测定的温度范围进行探讨，并对各种穗发芽抗性测定方法的对青稞的适用性进行评测。通过探讨温度对13 个不同基因型的青稞籽粒发芽和休眠性表达的影响，对筛选青稞抗穗发芽资源的温度条件进行探索，并初步分析了其休眠性表达的机理。在10，15，20，25，30℃的黑暗条件下，选用新收获的13 个青稞品种为材料进行籽粒发芽实验，以发芽指数（GI）评价其休眠性。结果发现，不同品种对温度敏感性不同，其中温度不敏感品种，在各温度条件下均表现很低的休眠性；而温度敏感品种，其休眠性表达受低温抑制，受高温诱导。15℃至25℃是进行青稞休眠性鉴定的较适宜的温度范围。通过对供试材料发芽后的α-淀粉酶活性，发现温度对青稞种子的休眠性表达的影响至少在一定程度上表现在对α-淀粉酶活性的调控上。随后，对分别在马尔康和成都进行种植的34 份青稞穗发芽指数（SI），穗发芽率（SR），籽粒发芽指数（GI）和α-淀粉酶活性（AA）进行了测定和分析，发现它们均受基因型×栽培地点的极显著影响，且四个参数之间具有一定相关性。GI 参数由于其变异系数较低，在不同栽培地点稳定性好，且操作简便，是较可靠和理想的穗发芽评价参数。SI 参数可作为辅助，区别籽粒休眠性相似的材料（基因型）或全面评价材料（基因型）的穗发芽抗性特征。AA 参数稳定性较差，并且检测方法复杂，因此不建议在育种及大量材料筛选和评价时使用。此外，青稞穗发芽抗性受环境影响较大，评价时应考虑到尽可能多的抗性影响因素及其在不同栽培条件下的变异。 2. 对来自青藏高原的青稞穗发芽抗性特征及其与其它农艺性状间的关系进行研究。通过测定穗发芽指数（SI）、籽粒发芽指数（GI）和α-淀粉酶活性（AA），表明113 份青稞材料的穗发芽抗性具有显著差异。SI、GI 和AA 参数的变幅分别为1.00~8.86、0.01~0.97 和0.00~2.76，其均值分别为4.72、0.63 和1.22。根据SI 参数，六个基因型，包括‘XQ9-5’，‘XQ33-9’，‘XQ37-5’，‘XQ42-9’，‘XQ45-7’和‘JCL’被鉴定为抗性品种。综合SI、GI 和AA 参数，可以发现青稞的穗发芽抗性机制包含颖壳等穗部结构的抗性和种子自身的抗性（即种子休眠性），且供试材料中未发现较强的胚休眠品种，除‘XQ45-7’外，所有品种在发芽第四天均能检测出α-淀粉酶活性。穗部结构和种子休眠的抗性机制因基因型不同而不同，在穗发芽抗性中可单独作用或共同作用。农家品种和西藏群体分别比栽培品种和四川群体的穗发芽抗性强，而在不同籽粒颜色的青稞中未发现明显差异。相关性检验发现，青稞的穗发芽抗性，主要是种子休眠性，与百粒重、开花期、成熟期、穗长、芒长和剑叶长呈显著负相关关系，与株高相关性不显著。农艺性状可以作为穗发芽抗性材料选育中的辅助指标。本试验为青稞穗发芽抗性育种研究提供了必要的理论基础和可供使用的亲本材料。 3. α-淀粉酶是由多基因家族编码的蛋白质，在植物种子萌发时高度表达，与植物种子的萌发能力密切相关。在大麦种子发芽时，高等电点α-淀粉酶的活性远大于低等电点的α-淀粉酶。为了研究不同穗发芽抗性青稞品种中编码高等电点α-淀粉酶Amy1 基因结构与抗性间的关系，我们以筛选得到的抗性品种‘XQ32-5’（TR1）、‘XQ37-5’（TR2）、‘XQ45-7’（TR3），易感品种‘97-15’（TS1）、‘9657’（TS2）以及强休眠大麦品种‘SAMSON’（SAM）为材料，对其Amy1 基因的编码区序列进行克隆和结构分析，并对它们推导的氨基酸序列进行比较。结果显示，青稞Amy1 基因具有三个外显子、两个内含子，编码区中有13 个核苷酸变异位点，均位于2、3 号外显子，2 个变异位点位于2 号外显子。SAM 和TS1 分别在2 号外显子相应位置有5 个相同的碱基(GAACT)的插入片段。相应α-淀粉酶氨基酸序列推导发现，所有核苷酸变异中有8 个导致相应氨基酸残基的改变，其余位点为同义突变。青稞Amy1 基因编码区序列品种间相似度高达99%以上，部分序列变异可能与其穗发芽抗性有关。随后，我们又通过SYBR Green 荧光定量技术对该基因在不同发芽时间（1d~7d）的相对表达水平进行了差异性检测。结果发现，7 天内不能检测到SAM 的Amy1 基因表达，5 个青稞品种间的Amy1 基因的相对表达量均随着发芽时间延长而上升，但上升方式有所不同。弱抗品种该基因表达更早，转录本增加速率更大，且在4~5 天可达到平台期。发芽7 天中，抗性品种总转录水平明显低于易感品种。本研究结果表明，青稞Amy1 基因的转录水平是与其穗发芽抗性高度相关。 我国青藏高原青稞，尤其是农家品种的穗发芽抗性具有丰富的变异，蕴藏着穗发芽抗性育种的宝贵资源。本研究为青稞穗发芽抗性育种建立了合理抗性评价体系，筛选出可供育种使用的特殊材料，阐明了农艺性状可辅助穗发芽抗性育种，同时还对穗发芽抗性与α-淀粉酶基因的结构和表达关系进行分析，为青稞穗发芽抗性资源筛选奠定了基础。 Preharvest sprouting (PHS) is a serious problem in crop production. It often takes place when encountering damp, cold conditions at harvest time and results in the decrease of grain quality and great loss of yield by triggering the synthesis of endosperm degrading enzymes (mostly the α-amylase). Therefore, PHS is regarded as an important criterion for crop breeding. In order to minimize the risk of PHS, resistant genotypes are highly required. Hulless barley (Hordeum vulgare ssp. vulgare) is the staple food crop in Qinghai-Tibetan Plateau from of old, where is one of the origin and genetic diversity centers of hulless barley. Recently, interest in hulless barley has been sparked throughout the world due to the demonstrations of its great potential in health food industry and fuel alcohol production. Indeed, hulless barley can also be utilized to produce good quality malt if the appropriate malting conditions are used. In China, overcast and rainy conditions often occur at maturity of hulless barley and cause an adverse on its production and application. PHS resistant genotypes, therefore, are highly required for the hulless barley breeding programs. However, few investigations have been made so far on this issue. The objectives of this study were: 1) to assessment of methods used in testing preharvest sprouting resistance in hulless barley; 2) to evaluate the variability and characteristics of PHS resistance of hulless barley from Qinghai-Tibet Plateau in China; 3) to select potential parents for PHS resistance breeding; 4) to primarily study on the molecular mechanism of PHS resistance of hulless barley. Our results are as followed: 1. We investigated the temperature effects on seed germination and seed dormancy expression of hulless barley, discussed appropriate temperature range for screening of PHS resistant varieties, and analyzed the mechanism of seed dormancy expression of hulless barley. The dormancy level of 13 hulless barley were evaluated by GI (germination index) values calculating by seed germination tests at temperature of 10，15，20，25，30℃ in darkness. There were great differences in temperature sensitivity among these accessions. The insensitive accessions showed low dormancy at any temperature while the dormancy expression of sensitive accessions could be restrained by low temperature and induced by high temperature. The temperature range of 15℃ to 25℃ was workable for estimating of dormancy level of hulless barley according to our data. Analysis of α-amylase activity showed that the temperature effects on seed germination and the expression of seed dormancy be achieved probable via regulating of α-amylase activity. Furthermore, we evaluated the differences in sprouting index (SI), sprouting rate (SR), germination index (GI) and α-amylase activity (AA) between Maerkang and Chengdu among 34 accessions of hulless barley from Qinghai-Tibetan Plateau in China. These PHS sprouting parameters were significantly affected by accession×location, and they had correlation between each other. GI was the most reliable parameter because of its low CV value, good repeatability and simple operation. SI could assist in differentiating between accessions of similar dormancy or overall evaluation of the resistance. AA was bad in repeatability and had relatively complex testing method, therefore, not appropriate for breeding and evaluation and screening of PHS resistant materials. Besides, since PHS resistance of hulless barley was greatly influenced by its growth environment, possibly much influencing factors and variations between cultivated conditions should be considered. 2. In this study, large variation was found among 113 genotypes of hulless barley (Hordeum vulgare ssp.vulgare) from Qinghai-Tibetan Plateau in China, based on the sprouting index (SI), germination index (GI) and α-amylase activity (AA) which derived from sprouting test of intact spikes, germination test of threshed seeds and determination of α-amylase activity, respectively. The range of SI, GI and AA was 1.00~8.86, 0.01~0.97 and 0.00~2.76，the mean was 4.72, 0.63 and 1.22 espectively. Six resistant genotypes, including ‘XQ9-5’, ‘XQ33-9’, ‘XQ37-5’, ‘XQ42-9’, ‘XQ45-7’ and ‘JCL’, were identified based on SI. Integrating the three parameters, it was clear that both hulls and seeds involved in PHS resistance in intact spikes of hulless barley and there was no long-existent embryo dormancy found among the test genotypes. All the genotypes, except ‘XQ45-7’, had detectable α-amylase activity on the 4th day after germination. There was PHS resistance imposed by the hull and seed per se and the two factors can act together or independent of each other. Besides, landraces or Tibet hulless barley had a wider variation and relatively more PHS resistance when compared with cultivars or Sichuan hulless barley. No significant difference was found among hulless barley of different seed colors. The correlation analysis showed PHS resistance was negatively related to hundred grain weight, days to flowering, days to maturity, spike length, awn length and flag length but not related to plant height. This study provides essential information and several donor parents for breeding of resistance to PHS. 3. Alpha-amylase isozymes are encoded by a family of multigenes. They highly express in germinating seeds and is closely related to seed germination ability. In barley germinating seeds, the activity of high pI α-amylase is much higher than low pI α-amylase. The aim of this study was to determine the relationship between preharvest sprouting resistance of hulless barley and the gene structure of Amy1 gene which encodes high pI α-amylase. The coding region and cDNA of Amy1 gene of three resistant accessions, including ‘XQ32-5’ (TR1), ‘XQ37-5’ (TR2), ‘XQ45-7’ (TR3), two susceptible accessions ‘97-15’ (TS1), ‘9657’ (TS2) and one highly dormant barley accession ‘SAMSON’ (SAM) was cloned. Analysis of their DNA sequences revealed there were three exons and two introns in Amy1 gene. Thirteen variable sites were in exon2 and exon3, 2 variable sites were in intron2. SAM and TS1 had a GAACT insert segment in the same site in intron2. Only 8 variable sites caused the change of amino acid residues. There were 99% of similarity between the tested hulless barley and some of the variable sites might be related with preharvest sprouting resistance. Then, we investigated the expression level of Amy1 gene in the 7-day germination test. Results of quantitative real-time PCR indicated that the relative expression trends of Amy1 gene were the same but had significant differences in the increase fashion between hulless barleys and no detectable expression was found in SAM. Susceptible accessions had earlier expression and faster increase and reached the maximum on day 4 ~ day 5. Besides, total transcripts level was found lower in resistant accessions than susceptible accessions. This study indicated that α-amylase activity was highly related to the transcription level of Amy1 gene which not correlated to missense mutation sites. In conclusion, hulless barley, especially the landraces from Qinghai-Tibetan Plateau in China possesses high degree of variation in PHS performance, which indicates the potential of Tibetan hulless barley as a good source for breeding of resistance to PHS. This study provides several donor parents for breeding of resistance to PHS. Our results also demonstrate that agronomic traits may be used as assistants for PHS resistance selection in hulless barley. Besides, analysis of high pI α-amylase coding gene Amy1 revealed the relative high expression of was Amy1 one of the mainly reason of different PHS resistance level in hulless barley.

三柔索吊床机构设计与运动学分析

研制了一种有重力约束的三索控制的柔索吊床机构来模拟船体海面上的运动。为了解三柔索吊床机构的运动特性 ,对其进行了运动学建模与仿真。仿真结果表明 ,台面倾角在 0°～ 30 0°变化时 ,台面不碰撞立柱 ,且柔索伸缩长度与台面倾斜角度接近于线性变化。本文所做的工作对吊床平台避免撞击立柱、缩小吊床立柱布置空间、提高空间利用率 ,以及为吊床的运动控制提供了理论依据

深水滑翔机器人耐压壳体结构优化设计

针对深水滑翔机器人耐压壳体在深水中压缩变形和海水密度随水深增大而变化等因素造成驱动浮力变化问题,利用压缩变形和密度变化对驱动浮力影响的互补特性,归纳了载体耐压壳体结构优化设计方法。保证耐压壳体抗压条件和质量最小前提下采用结构优化设计方法,降低耐压壳体压缩变形和海水密度变化对驱动浮力的影响,提高系统能源的利用率。

一个CIMS环境下的基于范例的船体装配CAPP系统

本文介绍了一个 CIMS环境下的基于范例的船体装配 CAPP系统 .包括 :CAPP系统在渤海造船厂 CIMS工程中的地位 ,基于范例的工艺规划 (范例的表达 ,范例的索引、存储、检索和适应 ) ,工艺定额和材料定额制定 ,分系统之间的信息集成 .系统采用 Power Builder和 SQL Server数据库中的 SQL语言编写 .目前 ,船体装配 CAPP系统已经在渤海造船厂的微机上连网运行

Bézier曲线间最近距离的计算方法

针对Bzier曲线间最近距离计算问题,提出一种简捷、可靠的计算方法.该方法以Bernstein多项式算术运算为工具,建立Bzier曲线间最近距离的计算模型;然后充分利用Bzier曲面的凸包性质和de Casteljau分割算法进行求解.该方法几何意义明确,能有效地避免迭代初始值的选择和非线性方程组的求解,并可进一步推广应用于计算Bzier曲线/曲面间的最近距离.实验结果表明,该方法简捷、可靠且容易实现,与Newton-Raphson方法的融合可进一步提高该方法的运行速度.

Virtual Visual Hulls: Example-Based 3D Shape Estimation from a Single Silhouette

Recovering a volumetric model of a person, car, or other object of interest from a single snapshot would be useful for many computer graphics applications. 3D model estimation in general is hard, and currently requires active sensors, multiple views, or integration over time. For a known object class, however, 3D shape can be successfully inferred from a single snapshot. We present a method for generating a ``virtual visual hull''-- an estimate of the 3D shape of an object from a known class, given a single silhouette observed from an unknown viewpoint. For a given class, a large database of multi-view silhouette examples from calibrated, though possibly varied, camera rigs are collected. To infer a novel single view input silhouette's virtual visual hull, we search for 3D shapes in the database which are most consistent with the observed contour. The input is matched to component single views of the multi-view training examples. A set of viewpoint-aligned virtual views are generated from the visual hulls corresponding to these examples. The 3D shape estimate for the input is then found by interpolating between the contours of these aligned views. When the underlying shape is ambiguous given a single view silhouette, we produce multiple visual hull hypotheses; if a sequence of input images is available, a dynamic programming approach is applied to find the maximum likelihood path through the feasible hypotheses over time. We show results of our algorithm on real and synthetic images of people.

Stochastic Mesh-Based Multiview Reconstruction

A method for reconstruction of 3D polygonal models from multiple views is presented. The method uses sampling techniques to construct a texture-mapped semi-regular polygonal mesh of the object in question. Given a set of views and segmentation of the object in each view, constructive solid geometry is used to build a visual hull from silhouette prisms. The resulting polygonal mesh is simplified and subdivided to produce a semi-regular mesh. Regions of model fit inaccuracy are found by projecting the reference images onto the mesh from different views. The resulting error images for each view are used to compute a probability density function, and several points are sampled from it. Along the epipolar lines corresponding to these sampled points, photometric consistency is evaluated. The mesh surface is then pulled towards the regions of higher photometric consistency using free-form deformations. This sampling-based approach produces a photometrically consistent solution in much less time than possible with previous multi-view algorithms given arbitrary camera placement.

Contour Generator Points for Threshold Selection and a Novel Photo-Consistency Measure for Space Carving

Space carving has emerged as a powerful method for multiview scene reconstruction. Although a wide variety of methods have been proposed, the quality of the reconstruction remains highly-dependent on the photometric consistency measure, and the threshold used to carve away voxels. In this paper, we present a novel photo-consistency measure that is motivated by a multiset variant of the chamfer distance. The new measure is robust to high amounts of within-view color variance and also takes into account the projection angles of back-projected pixels. Another critical issue in space carving is the selection of the photo-consistency threshold used to determine what surface voxels are kept or carved away. In this paper, a reliable threshold selection technique is proposed that examines the photo-consistency values at contour generator points. Contour generators are points that lie on both the surface of the object and the visual hull. To determine the threshold, a percentile ranking of the photo-consistency values of these generator points is used. This improved technique is applicable to a wide variety of photo-consistency measures, including the new measure presented in this paper. Also presented in this paper is a method to choose between photo-consistency measures, and voxel array resolutions prior to carving using receiver operating characteristic (ROC) curves.

Assessment of the impact of computed and measured fire environments on building evacuation using bench and real scale test data

This study investigates the use of computer modelled versus directly experimentally determined fire hazard data for assessing survivability within buildings using evacuation models incorporating Fractionally Effective Dose (FED) models. The objective is to establish a link between effluent toxicity, measured using a variety of small and large scale tests, and building evacuation. For the scenarios under consideration, fire simulation is typically used to determine the time non-survivable conditions develop within the enclosure, for example, when smoke or toxic effluent falls below a critical height which is deemed detrimental to evacuation or when the radiative fluxes reach a critical value leading to the onset of flashover. The evacuation calculation would the be used to determine whether people within the structure could evacuate before these critical conditions develop.

Ecological Investigations with the Continuous Plankton Recorder: The Phytoplankton in the Southern North Sea. 1932-37.

1. The changes in the composition and distribution of the plankton of the southern North Sea have been investigated month by month, from June 1932 to December 1937; the present report deals with the phytoplankton. The survey was carried out by the Continuous Plankton Recorder, towed at a standard depth of 10 metres, by ships on regular steamship lines across the North Sea from Hull towards the Skagerrak, to Bremen and to Rotterdam, and later between London and Esbjerg. 2. The material and methods are described, together with a discussion on the validity of this type of survey and some comparison of its results with those obtained by other methods (pp. 76-86). 3. Particular attention has been paid to Rhizosolenia styliformis (pp. 92- 107), Biddulphia sinensis (pp. 108-115), Phaeocystis (pp. 149-153), and the Dinoflagellates (pp. 134-149); of these the first three are known to be of particular importance in relation to the herring fisheries. More generalised data are available for the principal diatoms other than R. styliformis and B. sinensis (pp. 116-134). 4. The main part of the work is an ecological study of the phytoplankton changes in time and space over the 5½ years. Each year is marked by some distinct variations in the abundance and the times of increase, maximum numbers and decline as recorded in the different forms. These variations in the annual cycles are compared on the different lines by a series of graphs arranged against a time scale of months, a set for each year being placed side by side (Plates I-XXI). More detailed studies by more frequent records were made in the autumns of 1934, 1935, 1936 and 1937 (cf. Figs. 3 and 4). The changes in spatial distribution are shown by a series of monthly maps arranged in a similar manner for each year (Plates XXII-LXIV). These intensive studies of the changes in time and space are also intended to form the basis for correlations with other features in the general ecology of the area (e. g. the zooplankton, hydrology, meteorology and fisheries) to be made in later publications. 5. Whilst each form has shown its own peculiar features, a trend towards a general increase in the phytoplankton as a whole has been observed during the period, although the years 1934 and 1936 have in some respects shown deviations and regressive features, and not all organisms have revealed the same trend. The possible relation of this gradual trend to other events observed in recent years in these and neighbouring waters is discussed (pp. 162-167). 6. The application of these results to the study of patchiness (pp. 154-158), inter-relationships in the plankton (pp. 159-160) and to water movements (pp. 160-162) is briefly discussed.

Ecological Investigations with the Continuous Plankton Recorder: The Copepoda of the Southern North Sea. 1932-37.

I. The monthly changes in the distribution and abundance of the Copepoda in the southern North Sea have been investigated from June 1932 to December 1937 by using the Continuous Plankton Recorder. This was towed at a standard depth of 10 metres by ships sailing on regular lines from Hull to Rotterdam, to Bremen and towards the Skagerrak, and later from London to Esbjerg. 2. The methods are described and those limitations which apply more particularly to the Copepoda are discussed (pp. 175 to 186 and 198 to 203). 3. The first part of the report deals with the Copepoda as a whole, i.e. the total population. The difference between the summer and winter distributions is stressed. The variations in numbers from year to year are found to be considerable and it is suggested that they are sufficiently large to be reflected in the success or failure of the broods of those fish which are at some period of their development dependent upon the Copepoda for food. 4. The second part deals with the data concerning the constituent species or groups of allied species ; a list of these is given on p. 197. 5. The group Paracalanus + Pseudocalanus was by far the most abundant and together with the genera Temora and Acartia was found to be responsible for most of the fluctuations in the population (pp. 205 to 208). 6. The distributions, seasonal and spatial, of the other common forms are described, with the exception of that of Oalantts finmarchicus which is to be the subject of a later report. 7. The recorder results are compared with the findings of the International Council survey from 1902 to 1908; some marked disagreements are discussed (pp. 227 to 232). 8. The appearance of the northern forms Oandacia armata and Metridia lucens during the winters of 1932-33, 1933-34 and 1937 are recorded (pp. 222 to 223) 9. A summarised account of the main seasonal changes in the area is given (pp. 232 to 234) and followed by a brief comparison of the 5½ years investigated.