Quantifying ice-shelf basal melt and ice-stream dynamics using high-resolution DEM and GPS time series

Thesis (Ph.D.)--University of Washington, 2016-06

Preliminary experience of allied health assessments delivered face to face and by videoconference to a residential facility for elderly people

We investigated whether allied health assessments carried out via videoconferencing were comparable to assessments carried out face to face. Five allied health therapists (in dietetics, occupational therapy, physiotherapy, podiatry and speech pathology) conducted an assessment of 12 high-dependency residents both face to face and by videoconferencing. On a five-point Likert scale, the therapists' mean ratings for the efficiency and suitability of videoconferencing for assessment were significantly lower than for face to face. Their mean rating for the adequacy of their care plans was also significantly lower for videoconferencing than for face to face. However, in each case the dietician's assessments did not differ significantly between the two modalities. In 35 cases out of 60, two independent raters agreed that the therapists' care plans after the videoconferencing and face-to-face assessments were the same. However, the level of agreement between raters was only moderate (kappa=0.31). Despite the therapists' (natural) preference for face-to-face working, care plans formulated via videoconferencing were reasonably similar to those formulated in face-to-face assessment. Allied health assessments carried out by videoconferencing would therefore seem to be feasible.

The cost of allied health assessments delivered by videoconference to a residential facility for elderly people

We calculated the cost of providing allied health assessments to high-dependency residents of a rural facility for elderly people. The costs of conducting assessments via videoconferencing were compared with the costs of conducting assessments face to face. The observed costs in a three-month pilot trial were used to estimate the annual costs. Given an annual workload of 1000 occasions of service, each videoconference assessment would cost $84.93, compared with $90.25 for face-to-face assessments. Allied health assessments delivered by videoconferencing became cheaper at workloads of approximately 850 occasions of service annually. Additional increases in the workload further improved the financial viability of this approach to service delivery.

Numerical modelling of thermal effects in rats due to high-field magnetic resonance imaging (0.5-1 GHz)

A finite-difference time-domain (FDTD) thermal model has been developed to compute the temperature elevation in the Sprague Dawley rat due to electromagnetic energy deposition in high-field magnetic resonance imaging (MRI). The field strengths examined ranged from 11.75-23.5 T (corresponding to H-1 resonances of 0.5-1 GHz) and an N-stub birdcage resonator was used to both transmit radio-frequency energy and receive the MRI signals. With an in-plane resolution of 1.95 mm, the inhomogeneous rat phantom forms a segmented model of 12 different tissue types, each having its electrical and thermal parameters assigned. The steady-state temperature distribution was calculated using a Pennes 'bioheat' approach. The numerical algorithm used to calculate the induced temperature distribution has been successfully validated against analytical solutions in the form of simplified spherical models with electrical and thermal properties of rat muscle. As well as assisting with the design of MRI experiments and apparatus, the numerical procedures developed in this study could help in future research and design of tumour-treating hyperthermia applicators to be used on rats in vivo.

Perceived environment attributes, residential location, and walking for particular purposes

Background: Identifying environmental factors that can influence physical activity is a public health priority. We examined associations of perceived environmental attributes with walking for four different purposes: general neighborhood walking, walking for exercise, walking for pleasure, and walking to get to and from places. Methods: Participants (n =399; 57% women) were surveyed by mail. They reported place of residence, walking behaviors, and perceptions of neighborhood environmental attributes. Results: Men with the most positive perceptions of neighborhood aesthetics were significantly more likely (odds ratio [OR] =7.4) to be in the highest category of neighborhood walking. Men who perceived the weather as not inhibiting their walking were much more likely (OR= 4.7) to be high exercise walkers. Women who perceived the weather as not inhibiting their walking were significantly more likely to be high neighborhood walkers (OR=3.8) and those with moderate perceptions of accessibility were much more likely to do more walking for pleasure (OR=3.5). Conclusions: Different environmental attributes were associated with different types of walking and these differed between men and women. Approaches to increasing physical activity might usefully focus on those attributes of the local environment that might influence particular subsets of walking behavior.

Improved physical performance in older adults undertaking a short-term programme of high-velocity resistance training

Background: The age-related loss of muscle power in older adults is greater than that of muscle strength and is associated with a decline in physical performance. Objective: To investigate the effects of a short-term high-velocity varied resistance training programme on physical performance in healthy community-dwelling adults aged 60-80 years. Methods: Subjects undertook exercise (EX; n = 15) or maintained customary activity (controls, CON; n = 10) for 8 weeks. The EX group trained 2 days/week using machine weights for three sets of eight repetitions at 35, 55, and 75% of their one-repetition maximum (the maximal weight that an individual can lift once with acceptable form) for seven upper- and lower-body exercises using explosive concentric movements. Results: Fourteen EX and 10 CON subjects completed the study. Dynamic muscle strength significantly increased (p = 0.001) in the EX group for all exercises (from 21.4 +/- 9.6 to 82.0 +/- 59.2%, mean +/- SD) following training, as did knee extension power (p < 0.01). Significant improvement occurred for the EX group in the floor rise to standing (10.4 &PLUSMN; 11.5%, p = 0.004), usual 6-metre walk (6.6 &PLUSMN; 8.2%, p = 0.010), repeated chair rise (10.4 &PLUSMN; 15.6%, p = 0.013), and lift and reach (25.6 &PLUSMN; 12.1%, p = 0.002) performance tasks but not in the CON group. Conclusions: Progressive resistance training that incorporates rapid rate-of-force development movements may be safely undertaken in healthy older adults and results in significant gains in muscle strength, muscle power, and physical performance. Such improvements could prolong functional independence and improve the quality of life. Copyright (C) 2005 S. Karger AG, Basel.

Knowledge and understanding of choice diversity of residential care staff working with individuals with intellectual disabilities

The present study aimed to trial the effectiveness of 10 newly developed brief vignettes portraying typical interactions between staff and people with intellectual disabilities in residential care settings to assess the knowledge and understanding of staff about choice diversity, pre- and post-attendance at a staff training workshop. A total of 29 residential staff completed the Vignette Rating Scale and a knowledge questionnaire pre- and post-training. A t- test conducted on the vignettes revealed that respondents identified fewer choices in the post-test vignettes compared to the pre-test vignettes. Results showed no significant difference between the pre- and post-test data on the knowledge questionnaire. The questionnaire revealed a high level of knowledge about choice prior to and following training. The vignettes, however, proved effective in measuring changes in awareness of choice diversity among residential staff following participation in a staff training workshop.

High- and low-volume resistance training similarly enhances functional performance in older adults

It is well known that resistance training improves muscle strength in older adults and may enhance or preserve functional performance. However, it is unclear if the volume of work undertaken in the elderly alters the response in functional performance. PURPOSE: To investigate the effect of a high- versus low-volume resistance training program on functional performance in older adults. METHODS: Thirty-two healthy men and women aged 65-78 years were randomly assigned to either a single-set (SS, n = 16) or 3-set (MS, n = 16) progressive resistance training program for 20 weeks. Groups trained 2 days per week using machine weights at 8 repetitions maximum (8-RM) for 7 upper and lower body exercises. Muscle strength was assessed by the 1-RM and functional performance by a battery of tests (repeated chair rise, usual and fast 6-m walk, 6-m backwards walk, floor rise to standing, stair climb, and 400-m walk time). RESULTS: Twenty-eight subjects completed the study. There was no difference between groups at baseline in muscle strength or functional performance. Whole body muscle strength significantly increased in both groups with greater gains in the 3-set group (MS 32.9 ± 3.1%; SS 18.6 ± 2.7%, mean ± SE; P < 0.01). Significant improvement (time effect, P < 0.01) occurred for both groups in the chair rise (MS 13.6 ± 3.2%; SS 10.2 ± 3.0%), 6-m backwards walk (MS 14.9 ± 3.3%; SS 14.3 ± 4.2%), stair climb (MS 6.4 ± 2.8%; SS 7.7 ± 3.1%) and 400-m walk (MS 7.4 ± 1.4%; SS 3.9 ± 1.2%). There were no interaction (group × time) effects for functional performance and no differences by sex. CONCLUSION: Resistance training that utilizes either a singleset or 3-set regimen may significantly and similarly improve functional performance in community-dwelling older adults. Enhancement of functional performance may prolong independence and improve quality of life. ©2004The American College of Sports Medicine

Future Engineers Australia Management Project: Turning high school students into engineering entrepreneurs

There has been a strong move towards entrepreneurial education in high schools and at universities over the past few years. This has been echoed by a call from state governments around Australia to promote enterprise thinking and education in high schools. It also parallels the push within engineering to learn across the traditional boundaries , particularly between engineering and business. To meet this call, The Engineering Link Group (TELG) developed the Future Engineers Australia Management Project (FEAMP) in 2003. The project is based around Enterprise Education, and was inspired by the Smallpeice Year 12 Engineering Management course in the UK. The idea was to take high school students in years 11 and 12 and turn them into ‘engineering entrepreneurs’. This paper presents the design, development and evaluation of FEAMP as a five day residential course for year 11 and 12 students who want to learn more about being entrepreneurs and managers. It is a hands-on activity where the students invent, develop and sell an engineering concept to venture capitalists and ultimately to customers at a trade fair. It has been run successfully for two years, going from strength to strength. © 2005, Australasian Association for Engineering Education

User satisfaction with allied health services delivered to residential facilities via videoconferencing

We have investigated the role of videoconferencing in allied health service provision to high-care clients in rural residential facilities. Videoconferencing equipment was set up at a rural aged-care facility and a metropolitan allied health centre; ISDN transmission at 384 kbit/s was used to link the equipment. Twelve residents were assessed by both videoconference and face to face across five allied health disciplines (a total of 120 assessments). User satisfaction was measured using questionnaires and focus groups. Face-to-face assessment took significantly longer than videoconferencing assessment. However, the mean satisfaction ratings for face-to-face assessments were higher than for videoconferencing and the majority of the staff preferred the face-to-face format. Videoconferencing was particularly useful for consultations and the initial stages of the assessment process. A number of issues relating to the videoconferencing equipment, to the environment in which assessments were performed and to the clients themselves need to be addressed in order for this form of service delivery to be effective.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.

The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends

The effect of organically modified clay on the morphology, rheology and mechanical properties of high-density polyethylene (HDPE) and polyamide 6 (PA6) blends (HDPE/PA6 = 75/25 parts) is studied. Virgin and filled blends were prepared by melt compounding the constituents using a twin-screw extruder. The influence of the organoclay on the morphology of the hybrid was deeply investigated by means of wide-angle X-ray diffractometry, transmission and scanning electron microscopies and quantitative extraction experiments. It has been found that the organoclay exclusively places inside the more hydrophilic polyamide phase during the melt compounding. The extrusion process promotes the formation of highly elongated and separated organoclay-rich PA6 domains. Despite its low volume fraction, the filled minor phase eventually merges once the extruded pellets are melted again, giving rise to a co-continuous microstructure. Remarkably, such a morphology persists for long time in the melt state. A possible compatibilizing action related to the organoclay has been investigated by comparing the morphology of the hybrid blend with that of a blend compatibilized using an ethylene–acrylic acid (EAA) copolymer as a compatibilizer precursor. The former remains phase separated, indicating that the filler does not promote the enhancement of the interfacial adhesion. The macroscopic properties of the hybrid blend were interpreted in the light of its morphology. The melt state dynamics of the materials were probed by means of linear viscoelastic measurements. Many peculiar rheological features of polymer-layered silicate nanocomposites based on single polymer matrix were detected for the hybrid blend. The results have been interpreted proposing the existence of two distinct populations of dynamical species: HDPE not interacting with the filler, and a slower species, constituted by the organoclay-rich polyamide phase, which slackened dynamics stabilize the morphology in the melt state. In the solid state, both the reinforcement effect of the filler and the co-continuous microstructure promote the enhancement of the tensile modulus. Our results demonstrate that adding nanoparticles to polymer blends allows tailoring the final properties of the hybrid, potentially leading to high-performance materials which combine the advantages of polymer blends and the merits of polymer nanocomposites.

Measuring business growth:high-growth firms and their contribution to employment in the UK

The Measuring Business Growth report is a comprehensive look at UK business growth over the past decade. It makes a powerful case that a small number of high-growth businesses are responsible for the lion's share of job creation and prosperity. It is the counterpart to Business Growth and Innovation, which considers the wider benefits of growth businesses, their socio-economic impact, and the relationship between growth and innovation. This has significant implications for the direction of economic policy. It suggests that focusing attention on growing businesses and promoting excellence, far from being an elitist policy, gives rise to widespread job creation and prosperity.

Implications of high power losses in IR femtosecond laser inscribed fibre Bragg gratings

We report on high power issues related to the reliability of fibre Bragg gratings inscribed with an infrared femtosecond laser using the point-by-point writing method. Conventionally, fibre Bragg gratings have usually been written in fibres using ultraviolet light, either holographically or using a phase mask. Since the coating is highly absorbing in the UV, this process normally requires that the protective polymer coating is stripped prior to inscription, with the fibre then being recoated. This results in a time consuming fabrication process that, unless great care is taken, can lead to fibre strength degradation, due to the presence of surface damage. The recent development of FBG inscription using NIR femtosecond lasers has eliminated the requirement for the stripping of the coating. At the same time the ability to write gratings point-by-point offers the potential for great flexibility in the grating design. There is, however, a requirement for reliability testing of these gratings, particularly for use in telecommunications systems where high powers are increasingly being used in long-haul transmission systems making use of Raman amplification. We report on a study of such gratings which has revealed the presence of broad spectrum power losses. When high powers are used, even at wavelengths far removed from the Bragg condition, these losses produce an increase in the fibre temperature due to absorption in the coating. We have monitored this temperature rise using the wavelength shift in the grating itself. At power levels of a few watts, various temperature increases were experienced ranging from a few degrees up to the point where the buffer completely melts off the fibre at the grating site. Further investigations are currently under way to study the optical loss mechanisms in order to optimise the inscription mechanism and minimise such losses.

Entrepreneurship in the neighborhood:shifting patterns of economic activities in residential neighborhoods in five dutch cities

Cities are oftentimes seen as undergoing a process of "emergence" in the "new economy." However, this process has largely remained empirically underdetermined. This article examines the intra-city geography of emerging businesses in newly dominant sectors of the urban economy. The change in dominant sectors coincides with a shift towards small- and medium-sized businesses, creating new economic opportunities for urban residential areas. The residential neighborhood is introduced as a place where supply and demand side drivers operate to attract or limit such new economic activity. Allen Scott's perspective of the cognitive-cultural economy is used to analyze which neighborhoods are flourishing sites of the cognitive-cultural sectors. His perspective on industries that are on the rise in urban environments and their growth potential proves very valuable. Social demographic characteristics on the level of the neighborhood are used as predictors of the composition of the local economy. The analyses show that in particular wealthy, gentrified neighborhoods are more prone than others to becoming "hubs" of the cognitive-cultural economy. However, disadvantaged neighborhoods may under certain conditions serve as incubators for business start-ups as they offer low-rent office spaces. This has important consequences for their future economic growth potential as well as the distribution of successful businesses in the city. © 2013 Urban Affairs Association.