982 resultados para HTLV 1 associated myelopathy


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: This study confirmed the absence of natural infection with Xenotropic murine leukemia virus-related virus (XMRV) or XMRV-related disease in human populations of the Brazilian Amazon basin. We demonstrated that 803 individuals of both sexes, who were residents of Belem in the Brazilian State of Pará, were not infected with XMRV. Methods: Individuals were divided into 4 subgroups: healthy individuals, individuals infected with human immunodeficiency virus, type 1 (HIV-1), individuals infected with human T-lymphotrophic virus, types 1 or 2 (HTLV-1/2), and individuals with prostate cancer. XMRV infection was investigated by nested PCR to detect the viral gag gene and by quantitative PCR to detect pol. Results: There was no amplification of either gag or pol segments from XRMV in any of the samples examined. Conclusions: This study supports the conclusions of the studies that eventually led to the retraction of the original study reporting the association between XMRV and human diseases.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O depósito mineral de Sapucaia, situado no município de Bonito, região nordeste do Estado do Pará, é parte de um conjunto de ocorrências de fosfatos de alumínio lateríticos localizados predominantemente ao longo da zona costeira dos estados do Pará e Maranhão. Estes depósitos foram alvos de estudo desde o início do século passado, quando as primeiras descrições de “bauxitas fosforosas” foram mencionadas na região NW do Maranhão. Nas últimas décadas, com o crescimento acentuado da demanda por produtos fertilizantes pelo mercado agrícola mundial, diversos projetos de exploração mineral foram iniciados ou tiveram seus recursos ampliados no território brasileiro, dentre estes destaca-se a viabilização econômica de depósitos de fosfatos aluminosos, como o de Sapucaia, que vem a ser o primeiro projeto econômico mineral de produção e comercialização de termofosfatos do Brasil. Este trabalho teve como principal objetivo caracterizar a geologia, a constituição mineralógica e a geoquímica do perfil laterítico alumino-fosfático do morro Sapucaia. A macrorregião abrange terrenos dominados em sua maioria por rochas pré-cambrianas a paleozóicas, localmente definidas pela Formação Pirabas, Formação Barreiras, Latossolos e sedimentos recentes. A morfologia do depósito é caracterizada por um discreto morrote alongado que apresenta suaves e contínuos declives em suas bordas, e que tornam raras as exposições naturais dos horizontes do perfil laterítico. Desta forma, a metodologia aplicada para a caracterização do depósito tomou como base o programa de pesquisa geológica executada pela Fosfatar Mineração, até então detentora dos respectivos direitos minerais, onde foram disponibilizadas duas trincheiras e amostras de 8 testemunhos de sondagem. A amostragem limitou-se à extensão litológica do perfil laterítico, com a seleção de 44 amostras em intervalos médios de 1m, e que foram submetidas a uma rota de preparação e análise em laboratório. Em consonância com as demais ocorrências da região do Gurupi, os fosfatos de Sapucaia constituem um horizonte individualizado, de geometria predominantemente tabular, denominado simplesmente de horizonte de fosfatos de alumínio ou crosta aluminofosfática, que varia texturalmente de maciça a cavernosa, porosa a microporosa, que para o topo grada para uma crosta ferroalumino fosfática, tipo pele-de-onça, compacta a cavernosa, composta por nódulos de hematita e/ou goethita cimentados por fosfatos de alumínio, com características similares aos do horizonte de fosfatos subjacente. A crosta aluminofosfática, para a base do perfil, grada para um espesso horizonte argiloso caulinítico com níveis arenosos, que repousa sobre sedimentos heterolíticos intemperizados de granulação fina, aspecto argiloso, por vezes sericítico, intercalados por horizontes arenosos, e que não possuem correlação aparente com as demais rochas aflorantes da geologia na região. Aproximadamente 40% da superfície do morro é encoberta por colúvio composto por fragmentos mineralizados da crosta e por sedimentos arenosos da Formação Barreiras. Na crosta, os fosfatos de alumínio estão representados predominantemente pelo subgrupo da crandallita: i) série crandallita-goyazita (média de 57,3%); ii) woodhouseíta-svanbergita (média de 15,8%); e pela iii) wardita-millisita (média de 5,1%). Associados aos fosfatos encontram-se hematita, goethita, quartzo, caulinita, muscovita e anatásio, com volumes que variam segundo o horizonte laterítico correspondente. Como os minerais pesados em nível acessório a raro estão zircão, estaurolita, turmalina, anatásio, andalusita e silimanita. O horizonte de fosfatos, bem como a crosta ferroalumínio-fosfática, mostra-se claramente rica em P2O5, além de Fe2O3, CaO, Na2O, SrO, SO3, Th, Ta e em terras-raras leves como La e Ce em relação ao horizonte saprolítico. Os teores de SiO2 são consideravelmente elevados, porém muito inferiores aqueles identificados no horizonte argiloso sotoposto. No perfil como um todo, observa-se uma correlação inversa entre SiO2 e Al2O3; entre Al2O3 e Fe2O3, e positiva entre SiO2 e Fe2O3, que ratificam a natureza laterítica do perfil. Diferente do que é esperado para lateritos bauxíticos, os teores de P2O5, CaO, Na2O, SrO e SO3 são fortemente elevados, concentrações consideradas típicas de depósitos de fosfatos de alumínio ricos em crandallita-goyazita e woodhouseítasvanbergita. A sucessão dos horizontes, sua composição mineralógica, e os padrões geoquímicos permitem correlacionar o presente depósito com os demais fosfatos de alumínio da região, mais especificamente Jandiá (Pará) e Trauíra (Maranhão), bem como outros situados além do território brasileiro, indicando portanto, que os fosfatos de alumínio de Sapucaia são produtos da gênese de um perfil laterítico maturo e completo, cuja rocha fonte pode estar relacionada a rochas mineralizadas em fósforo, tais como as observadas na Formação Pimenteiras, parcialmente aflorante na borda da Bacia do Parnaíba. Possivelmente, o atual corpo de minério integrou a paleocosta do mar de Pirabas, uma vez que furos de sondagem às proximidades do corpo deixaram claro a relação de contato lateral entre estas unidades.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study was to evaluate citric acid application with or without chitosan on the maintenance of the quality of litchi 'Bengal'. It was used litchi on mature maturation stage. After selection, fruits were immersed for one minute on the solution of citric acid and chitosan: [1]Control - without immersion; [2] citric acid 300g L-1, [3] citric acid 300 g L-1 + chitosan 0,3%, [4]citric acid 300 g L-1 + chitosan 0,6%, [5] citric acid 600 g L-1, [6] citric acid 600 g L-1 + chitosan 0,3%, [7] citric acid 600 g L-1 + chitosan 0,6%. Chitosan of low molecular weight and deacetylation degree of 75,58% (Sigma - Aldrich®) were used. After immersion, fruits were put to drain the excess of solution. Then, they were stored in cool chamber at 5ºC, previously sanitized, for 20 days. The experiment was conducted following a completely randomized design, with a factorial scheme composed by seven coating solutions and five sampling dates. Every five days were evaluated: loss of fresh mass of fruits; color; content of anthocyanins and the activity of peel enzymes polyphenoloxidase and peroxidase. It was verified that the solution of citric acid 600 g L-1, associated or not to chitosan, and the combination of chitosan 0,3% to 300 g L-1 of citric acid were the most efficient to maintain the quality of litchi 'Bengal' for 20 days at 5ºC.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Agricultura) - FCA

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study aimed to control different populations of Digitaria insularis by glyphosate herbicide, isolated and mixed, besides the combination of methods (chemical and mechanical) to manage resistant adult plants. Three experiments were conducted, one in pots which were maintained under non-controlled conditions and two under field conditions. In the experiment in pots, twelve populations of D. insularis were sprayed with isolated glyphosate (1.44 and 2.16 kg a.e. ha(-1)) and mixed (1.44 and 2.16 kg a.e. ha(-1)) with quizalofop-p tefuryl (0.12 kg i.a. ha(-1)). The treatment of 1.44 kg a.e. ha(-1) of glyphosate plus 0.12 kg a.i. ha(-1) of quizalofop was sufficient for adequate control (>95%) of all populations. Population 11 (area of grain production in Itumbiara, GO) was considered sensitive to glyphosate. Others populations were moderately sensitive or tolerant to the herbicide. In the field, the plants of D. insularis of one of the experiments were mowed and, in the other, there were not. Eight treatments with herbicides [isolated glyphosate (1.44 and 2.16 kg a.e. ha(-1)) and mixed (1.44 and 2.16 kg a.e. ha(-1)) with quizalofop-p-tefuryl at 0.12 kg a.i. ha(-1)), clethodim at 0.108 kg a.i. ha(-1)) or nicosulfuron at 0.06 kg a.i. ha(-1))] were assessed, in combination with or without sequential application of the standard treatment, sprayed 15 days after the first application. The combination of the mechanic control with the application of glyphosate (2.16 and 1.44 kg a.e. ha(-1)) plus quizalofop-p-tefuryl (0.12 kg a.i. ha(-1)) or clethodim (0.108 kg a.i. ha(-1)), associated to the sequential application, was the most effective strategy for the management of adult plants of resistant D. insularis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Modeling is a step to perform a finite element analysis. Different methods of model construction are reported in literature, as the Bio-CAD modeling. The purpose of this study was to perform a model evaluation and application using two methods of Bio-CAD modeling from human edentulous hemi-mandible on the finite element analysis. From CT scans of dried human skull was reconstructed a stereolithographic model. Two methods of modeling were performed: STL conversion approach (Model 1) associated to STL simplification and reverse engineering approach (Model 2). For finite element analysis was used the action of lateral pterygoid muscle as loading condition to assess total displacement (D), equivalent von-Mises stress (VM) and maximum principal stress (MP). Two models presented differences on the geometry regarding surface number (1834 (model 1); 282 (model 2)). Were observed differences in finite element mesh regarding element number (30428 nodes/16683 elements (model 1); 15801 nodes/8410 elements (model 2). D, VM and MP stress areas presented similar distribution in two models. The values were different regarding maximum and minimum values of D (ranging 0-0.511 mm (model 1) and 0-0.544 mm (model 2), VM stress (6.36E-04-11.4 MPa (model 1) and 2.15E-04-14.7 MPa (model 2) and MP stress (-1.43-9.14 MPa (model 1) and -1.2-11.6 MPa (model 2). From two methods of Bio-CAD modeling, the reverse engineering presented better anatomical representation compared to the STL conversion approach. The models presented differences in the finite element mesh, total displacement and stress distribution.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Precursor glass and glass-ceramics with molar composition 2Na2O·1CaO·3SiO2 are studied by infrared, conventional, and microprobe Raman techniques. The Gaussian deconvoluted Raman spectrum of the glass presents bands at 625 and 660 cm-1, attributed to bending vibrations of Si-O-Si bonds, and at 860, 920, 975, and 1030 cm-1, attributed to symmetric stretching vibrations of SiO4 tetrahedra with 4, 3, 2, and 1 nonbridging oxygens, respectively. The Raman microprobe spectrum of a highly crystallized sample presents two narrow and intense bands at about 590 and 980 cm-1, associated with vibrations of SiO4 tetrahedra with two nonbridging oxygens, in agreement with the predicted chain-like structure of crystalline metasilicates. Scanning electron microscopy shows that the crystals distributed in partially crystallized samples have a spherical shape, built up by radially oriented needle-like single crystals. The Raman microprobe spectra of these spherulites show that they still contain residual amorphous material. A comparison of Raman and infrared spectra of amorphous and highly crystallized samples is presented.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

doi: 10.1111/j.1741-2358.2011.00526.x Biological evaluation of the bone healing process after application of two potentially osteogenic proteins: an animal experimental model Objective: The aim of this work was to analyse qualitatively and quantitatively the newly formed bone after insertion of rhBMP-2 and protein extracted from Hevea brasiliensis (P-1), associated or not with a carrier in critical bone defects created in Wistar rat calvarial bone, using histological and histomorphometrical analyses. Materials and methods: Eighty-four male Wistar rats were used, divided into two groups, according to the period of time until the sacrifice (2 and 6 weeks). Each one of these groups was subdivided into six groups with seven animals each, according to the treatments: (1) 5 mu g of pure rhBMP-2, (2) 5 mu g of rhBMP-2/monoolein gel, (3) pure monoolein gel, (4) 5 mu g of pure P-1, (5) 5 mu g of P-1/monoolein gel and (6) critical bone defect controls. The animals were euthanised and the calvarial bone tissue removed for histological and histomorphometrical analyses. Result and conclusion: The results showed an improvement in the bone healing process using the rhBMP-2 protein, associated or not with a material carrier in relation to the other groups, and this process demonstrated to be time dependent.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study was to perform an in vitro evaluation of the auxin: cytokinine ratio in different segments of the epicotyl and hypocotyl of Sacha inchi (Plukenetia Volubilis Linneo) seeds germinated in vitro. The segments apical (A), median (B) and basal (C) were introduced into semi-solid MS culture medium (2.0g L-1 Phytagel), supplemented with MS vitamins, sucrose (30.0g L-1) and submitted to three doses of auxin indolebutyric acid - IBA (0; 0.1; 0.5mg L-1), associated with four doses of the cytokinine benzylaminopurine - BAP (0; 0.1; 0.5; 1.0mg L-1), totaling 36 treatments. After nine weeks of in vitro cultivation, the apical segment ( A) presented shoot formation by direct organogenesis at the concentrations of 0.5 and 1.0 of BAP associated with 0.0 and 0.1 of IBA. It is feasible to use in vitro cultivation with the apical region of seeds germinated in vitro used as explants.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of these studies was to investigate whether insulin resistance is primary to skeletal muscle. Myoblasts were isolated from muscle biopsies of 8 lean insulin-resistant and 8 carefully matched insulin-sensitive subjects (metabolic clearance rates as determined by euglycemic-hyperinsulinemic clamp: 5.8 +/- 0.5 vs. 12.3 +/- 1.7 ml x kg(-1) x min(-1), respectively; P < or = 0.05) and differentiated to myotubes. In these cells, insulin stimulation of glucose uptake, glycogen synthesis, insulin receptor (IR) kinase activity, and insulin receptor substrate 1-associated phosphatidylinositol 3-kinase (PI 3-kinase) activity were measured. Furthermore, insulin activation of protein kinase B (PKB) was compared with immunoblotting of serine residues at position 473. Basal glucose uptake (1.05 +/- 0.07 vs. 0.95 +/- 0.07 relative units, respectively; P = 0.49) and basal glycogen synthesis (1.02 +/- 0.11 vs. 0.98 +/- 0.11 relative units, respectively; P = 0.89) were not different in myotubes from insulin-resistant and insulin-sensitive subjects. Maximal insulin responsiveness of glucose uptake (1.35 +/- 0.03-fold vs. 1.41 +/- 0.05-fold over basal for insulin-resistant and insulin-sensitive subjects, respectively; P = 0.43) and glycogen synthesis (2.00 +/- 0.13-fold vs. 2.10 +/- 0.16-fold over basal for insulin-resistant and insulin-sensitive subjects, respectively; P = 0.66) were also not different. Insulin stimulation (1 nmol/l) of IR kinase and PI 3-kinase were maximal within 5 min (approximately 8- and 5-fold over basal, respectively), and insulin activation of PKB was maximal within 15 min (approximately 3.5-fold over basal). These time kinetics were not significantly different between groups. In summary, our data show that insulin action and signaling in cultured skeletal muscle cells from normoglycemic lean insulin-resistant subjects is not different from that in cells from insulin-sensitive subjects. This suggests an important role of environmental factors in the development of insulin resistance in skeletal muscle.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJECTIVE To perform long QT syndrome and catecholaminergic polymorphic ventricular tachycardia cardiac channel postmortem genetic testing (molecular autopsy) for a large cohort of cases of autopsy-negative sudden unexplained death (SUD). METHODS From September 1, 1998, through October 31, 2010, 173 cases of SUD (106 males; mean ± SD age, 18.4 ± 12.9 years; age range, 1-69 years; 89% white) were referred by medical examiners or coroners for a cardiac channel molecular autopsy. Using polymerase chain reaction, denaturing high-performance liquid chromatography, and DNA sequencing, a comprehensive mutational analysis of the long QT syndrome susceptibility genes (KCNQ1, KCNH2, SCN5A, KCNE1, and KCNE2) and a targeted analysis of the catecholaminergic polymorphic ventricular tachycardia type 1-associated gene (RYR2) were conducted. RESULTS Overall, 45 putative pathogenic mutations absent in 400 to 700 controls were identified in 45 autopsy-negative SUD cases (26.0%). Females had a higher yield (26/67 [38.8%]) than males (19/106 [17.9%]; P<.005). Among SUD cases with exercise-induced death, the yield trended higher among the 1- to 10-year-olds (8/12 [66.7%]) compared with the 11- to 20-year-olds (4/27 [14.8%]; P=.002). In contrast, for those who died during a period of sleep, the 11- to 20-year-olds had a higher yield (9/25 [36.0%]) than the 1- to 10-year-olds (1/24 [4.2%]; P=.01). CONCLUSION Cardiac channel molecular autopsy should be considered in the evaluation of autopsy-negative SUD. Several interesting genotype-phenotype observations may provide insight into the expected yields of postmortem genetic testing for SUD and assist in selecting cases with the greatest potential for mutation discovery and directing genetic testing efforts.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Idiopathic pulmonary fibrosis (IPF) and bleomycin-induced pulmonary fibrosis are associated with surfactant system dysfunction, alveolar collapse (derecruitment), and collapse induration (irreversible collapse). These events play undefined roles in the loss of lung function. The purpose of this study was to quantify how surfactant inactivation, alveolar collapse, and collapse induration lead to degradation of lung function. Design-based stereology and invasive pulmonary function tests were performed 1, 3, 7, and 14 days after intratracheal bleomycin-instillation in rats. The number and size of open alveoli was correlated to mechanical properties. Active surfactant subtypes declined by Day 1, associated with a progressive alveolar derecruitment and a decrease in compliance. Alveolar epithelial damage was more pronounced in closed alveoli compared with ventilated alveoli. Collapse induration occurred on Day 7 and Day 14 as indicated by collapsed alveoli overgrown by a hyperplastic alveolar epithelium. This pathophysiology was also observed for the first time in human IPF lung explants. Before the onset of collapse induration, distal airspaces were easily recruited, and lung elastance could be kept low after recruitment by positive end-expiratory pressure (PEEP). At later time points, the recruitable fraction of the lung was reduced by collapse induration, causing elastance to be elevated at high levels of PEEP. Surfactant inactivation leading to alveolar collapse and subsequent collapse induration might be the primary pathway for the loss of alveoli in this animal model. Loss of alveoli is highly correlated with the degradation of lung function. Our ultrastructural observations suggest that collapse induration is important in human IPF.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

It is widely accepted that equine sarcoid disease, the most common skin associated neoplasm in equids, is induced by bovine papillomavirus (BPV-1). Although BPV-1 DNA has been found in almost all examined sarcoids so far, its detailed impact on the horse's host cell metabolism is largely unknown. We used equine fibroblast cell lines originating from sarcoid biopsies to study BPV-1-associated changes on DNA methylation status and oxidative stress parameters. Sarcoid-derived fibroblasts manifested increased proliferation in vitro, transcriptional rDNA activity (NORs expression) and DNA hypomethylation compared to control cells. Cells isolated from equine sarcoids suffered from oxidative stress: the expression of antioxidant enzymes was decreased and the superoxide production was increased. Moreover, increased ploidy, oxidative DNA damage and micronuclei formation was monitored in sarcoid cells. We postulate that both altered DNA methylation status and redox milieu may affect genomic stability in BPV-1-infected cells and in turn contribute to sarcoid pathology.