Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia

Research on alternative fuel for the vehemently growing number of automotivesis intensified due to environmental reasons rather than turmoil in energy price and supply. From the policy and steps to emphasis the use of biofuel by governments all around the world, this can be comprehended that biofuel have placed itself as a number one substitute for fossil fuels. These phenomena made Southeast Asia a prominent exporter of biodiesel. But thrust in biodiesel production from oilseeds of palm and Jatropha curcas in Malaysia, Indonesia and Thailand is seriously threatening environmental harmony. This paper focuses on this critical issue of biodiesels environmental impacts, policy, standardization of this region as well as on the emission of biodiesel in automotive uses. To draw a bottom line on feasibilities of different feedstock of biodiesel, a critical analysis on oilseed yield rate, land use, engine emissions and oxidation stability is reviewed. Palm oil based biodiesel is clearly ahead in all these aspects of feasibility, except in the case of NOx where it lags from conventional petro diesel.

Sustainable fashion textiles design : value adding through technological enhancement

A key concern in the field of contemporary fashion/textiles design is the emergence of ‘fast fashion’: best explained as "buy it Friday, wear it Saturday and throw it away on Sunday" (O'Loughlin, 2007). In this contemporary retail atmosphere of “pile it high: sell it cheap” and “quick to market”, even designer goods have achieved a throwaway status. This modern culture of consumerism is the antithesis of sustainability and is proving a dilemma surrounding sustainable practice for designers and producers in the disciplines (de Blas, 2010). Design researchers including those in textiles/fashion have begun to explore what is a key question in the 21st century in order to create a vision and reason for their disciplines: Can products be designed to have added value to the consumer and hence contribute to a more sustainable industry? Fashion Textiles Design has much to answer for in contributing to the problems of unsustainable practices on a global scale in design, production and waste. However, designers within this field also have great potential to contribute to practical ‘real world’ solutions. ----- ----- This paper provides an overview of some of the design and technological developments from the fashion/textiles industry, endorsing a model where designers and technicians use their transferrable skills for wellbeing rather than desire. Smart materials in the form of responsive and adaptive fibres and fabrics combined with electro active devices, and ICT are increasingly shaping many aspects of society particularly in the leisure industry and interactive consumer products are ever more visible in healthcare. Combinations of biocompatible delivery devices with bio sensing elements can create analyse, sense and actuate early warning and monitoring systems which can be linked to data logging and patient records via intelligent networks. Patient sympathetic, ‘smart’ fashion/textiles applications based on interdisciplinary expertise utilising textiles design and technology is emerging. An analysis of a series of case studies demonstrates the potential of fashion textiles design practitioners to exploit the concept of value adding through technological garment and textiles applications and enhancement for health and wellbeing and in doing so contribute to a more sustainable future fashion/textiles design industry.

New media pathways : navigating the links between home, school and the workplace

The terms ‘literacy’ and ‘technology’ remain highly contentious within the field of education. What is meant by ‘literacy’ and the methods used to measure it vary quite markedly in educational and historical contexts across the world. Similarly, while there is a shared concern to research the potential impact of new information and communication technologies (ICTs) on patterns of teaching and learning, there are major discrepancies about which aspects and uses of these technologies should be incorporated into formal learning environments and how this can be accomplished. While government policy makers tend to regard ICTs in relation to ideas of ‘smartness’, efficiency, and the ‘knowledge’ (or ‘new’) economy, educators and educational researchers promote them as offering new tools for learning and critical thinking and the development of new literacies and socio-cultural identities. This clearly has ramifications for the ways literacy is taught and conceptualised throughout the years of schooling, K-12. Outside school, meanwhile, students engage with ICTs on another level entirely, as tools for the maintenance of social networks, for leisure, and for learning and participating in the cultures of their peers. Whatever the differences in perspective, it remains the case that a society’s dominant understandings about literacy and technology will have significant implications for the development of school curriculum.

Ecological aspects of biosecurity surveillance design for the detection of multiple invasive animal species

Complex surveillance problems are common in biosecurity, such as prioritizing detection among multiple invasive species, specifying risk over a heterogeneous landscape, combining multiple sources of surveillance data, designing for specified power to detect, resource management, and collateral effects on the environment. Moreover, when designing for multiple target species, inherent biological differences among species result in different ecological models underpinning the individual surveillance systems for each. Species are likely to have different habitat requirements, different introduction mechanisms and locations, require different methods of detection, have different levels of detectability, and vary in rates of movement and spread. Often there is a further challenge of a lack of knowledge, literature, or data, for any number of the above problems. Even so, governments and industry need to proceed with surveillance programs which aim to detect incursions in order to meet environmental, social and political requirements. We present an approach taken to meet these challenges in one comprehensive and statistically powerful surveillance design for non-indigenous terrestrial vertebrates on Barrow Island, a high conservation nature reserve off the Western Australian coast. Here, the possibility of incursions is increased due to construction and expanding industry on the island. The design, which includes mammals, amphibians and reptiles, provides a complete surveillance program for most potential terrestrial vertebrate invaders. Individual surveillance systems were developed for various potential invaders, and then integrated into an overall surveillance system which meets the above challenges using a statistical model and expert elicitation. We discuss the ecological basis for the design, the flexibility of the surveillance scheme, how it meets the above challenges, design limitations, and how it can be updated as data are collected as a basis for adaptive management.

Machine prognostics based on health state probability estimation

The ability to accurately predict the remaining useful life of machine components is critical for machine continuous operation and can also improve productivity and enhance system’s safety. In condition-based maintenance (CBM), maintenance is performed based on information collected through condition monitoring and assessment of the machine health. Effective diagnostics and prognostics are important aspects of CBM for maintenance engineers to schedule a repair and to acquire replacement components before the components actually fail. Although a variety of prognostic methodologies have been reported recently, their application in industry is still relatively new and mostly focused on the prediction of specific component degradations. Furthermore, they required significant and sufficient number of fault indicators to accurately prognose the component faults. Hence, sufficient usage of health indicators in prognostics for the effective interpretation of machine degradation process is still required. Major challenges for accurate longterm prediction of remaining useful life (RUL) still remain to be addressed. Therefore, continuous development and improvement of a machine health management system and accurate long-term prediction of machine remnant life is required in real industry application. This thesis presents an integrated diagnostics and prognostics framework based on health state probability estimation for accurate and long-term prediction of machine remnant life. In the proposed model, prior empirical (historical) knowledge is embedded in the integrated diagnostics and prognostics system for classification of impending faults in machine system and accurate probability estimation of discrete degradation stages (health states). The methodology assumes that machine degradation consists of a series of degraded states (health states) which effectively represent the dynamic and stochastic process of machine failure. The estimation of discrete health state probability for the prediction of machine remnant life is performed using the ability of classification algorithms. To employ the appropriate classifier for health state probability estimation in the proposed model, comparative intelligent diagnostic tests were conducted using five different classifiers applied to the progressive fault data of three different faults in a high pressure liquefied natural gas (HP-LNG) pump. As a result of this comparison study, SVMs were employed in heath state probability estimation for the prediction of machine failure in this research. The proposed prognostic methodology has been successfully tested and validated using a number of case studies from simulation tests to real industry applications. The results from two actual failure case studies using simulations and experiments indicate that accurate estimation of health states is achievable and the proposed method provides accurate long-term prediction of machine remnant life. In addition, the results of experimental tests show that the proposed model has the capability of providing early warning of abnormal machine operating conditions by identifying the transitional states of machine fault conditions. Finally, the proposed prognostic model is validated through two industrial case studies. The optimal number of health states which can minimise the model training error without significant decrease of prediction accuracy was also examined through several health states of bearing failure. The results were very encouraging and show that the proposed prognostic model based on health state probability estimation has the potential to be used as a generic and scalable asset health estimation tool in industrial machinery.

What aspects of the scoliosis correction are most important to the teenager who has keyhole scoliosis correction surgery? A prospective series of 100 patients

Introduction. Surgical treatment of scoliosis is assessed in the spine clinic by the surgeon making numerous measurements on X-Rays as well as the rib hump. But it is important to understand which of these measures correlate with self-reported improvements in patients’ quality of life following surgery. The objective of this study was to examine the relationship between patient satisfaction after thoracoscopic (keyhole) anterior scoliosis surgery and standard deformity correction measures using the Scoliosis Research Society (SRS) adolescent questionnaire. Methods. A series of 100 consecutive adolescent idiopathic scoliosis patients received a single anterior rod via a keyhole approach at the Mater Children’s Hospital, Brisbane. Patients completed SRS outcomes questionnaires before surgery and again at 24 months after surgery. Multiple regression and t-tests were used to investigate the relationship between SRS scores and deformity correction achieved after surgery. Results. There were 94 females and 6 males with a mean age of 16.1 years. The mean Cobb angle improved from 52º pre-operatively to 21º for the instrumented levels post-operatively (59% correction) and the mean rib hump improved from 16º to 8º (51% correction). The mean total SRS score for the cohort was 99.4/120 which indicated a high level of satisfaction with the results of their scoliosis surgery. None of the deformity related parameters in the multiple regressions were significant. However, the twenty patients with the smallest Cobb angles after surgery reported significantly higher SRS scores than the twenty patients with the largest Cobb angles after surgery, but there was no difference on the basis of rib hump correction. Discussion. Patients undergoing thoracoscopic (keyhole) anterior scoliosis correction report good SRS scores which are comparable to those in previous studies. We suggest that the absence of any statistically significant difference in SRS scores between patients with and without rod or screw complications is because these complications are not associated with any clinically significant loss of correction in our patient group. The Cobb angle after surgery was the only significant predictor of patient satisfaction when comparing subgroups of patients with the largest and smallest Cobb angles after surgery.

Hypercapitalism : a political economy of informational idealism

In this this paper I identify specific historical trajectories that are directly contingent upon the deployment and use of new media, but which are actually hidden by a focus on the purely technological. They are: the increasingly abstract and alienated nature of economic value; the subsumption of all labour - material and intellectual - under systemic capital; and the convergence of formerly distinct spheres of analysis –the spheres of production, circulation, and consumption. This paper examines the implications of the knowledge economy from an historical materialist perspective. I synthesise the systemic views of Marx (1846/1972, 1875/1972 1970 1973 1976 1978 1981), Adorno (1951/1974 1964/1973 1991; Horkheimer and Adorno 1944/1998; Jarvis 1998), and Bourdieu (1991 1998) to argue for a language-focused approach to new media research and suggest aspects of Marxist thought which might be useful in researching emergent socio-technical domains. I also identify specific categories in the Marxist tradition which may no longer be analytically useful for researching the effects of new media.

The probability archive : essence, uncertainty, and the ‘Olduvai imperative.’

Starting from a local problem with finding an archival clip on YouTube, this paper expands to consider the nature of archives in general. It considers the technological, communicative and philosophical characteristics of archives over three historical periods: 1) Modern ‘essence archives’ – museums and galleries organised around the concept of objectivity and realism; 2) Postmodern mediation archives – broadcast TV systems, which I argue were also ‘essence archives,’ albeit a transitional form; and 3) Network or ‘probability archives’ – YouTube and the internet, which are organised around the concept of probability. The paper goes on to argue the case for introducing quantum uncertainty and other aspects of probability theory into the humanities, in order to understand the way knowledge is collected, conserved, curated and communicated in the era of the internet. It is illustrated throughout by reference to the original technological 'affordance' – the Olduvai stone chopping tool.

Three Interventions on culture-led regeneration in Gwanju, Korea

These three interventions, given over a three day period in 2010, concern the proposed multifunctional exhibition hall in Gwanju, Korea. The three interventions cover some theoretical and historical issues, but also consider the practical aspects of such a project.

Designing and using historical vignettes in science teaching : a personal account

Historical vignettes are interesting short stories which encapsulate a brief period of scientific history. They can be useful tools for teaching the nature of science, demonstrating the practices of science and making science fun. Historical vignettes illustrate the role of people and social processes in science. In this paper I describe my experience with writing and presenting an historical vignette during a Biology unit. Included is a copy of the vignette and I have identified some possible improvements that might lead to better outcomes. This may be helpful for other teachers who wish to try this strategy for themselves.

History in the Australian Curriculum F-10 : providing answers without asking questions

This paper examines the most recent version of the Australian Curriculum: History F-10. It does so in two ways. First, it explores some of the strengths and weaknesses of this curriculum with reference to the decision to frame aspects of Australian history within the context of a world history approach. Whilst the positioning of Indigenous Histories is applauded, the curriculum’s lack of attention to the significance of the recent history of Australia’s Asian neighbours, and Australia’s relationship with them, is critiqued. This part of the paper also emphasises the need for comparative approaches and calls for greater emphasis on providing students with opportunities to critique and contest the construction of narratives about the past. Second, the paper introduces four invited articles that examine different aspects of the Australian Curriculum: History. Collectively these papers reiterate the significance of the richness of integrated and child-centred approaches and the importance of developing historical thinking, empathy and the historical imagination in the classroom.

Evaluating educational software : a historical overview and the challenges ahead

Teachers are under increasing pressure from government and school management to incorporate technology into lessons. They need to consider which technologies can most effectively enhance subject learning, encourage higher order thinking skills and support the performance of authentic tasks. This chapter reviews the practical and theoretical tools that have been developed to aid teachers in selecting software and reviews the software assessment methodologies from the 1980s to the present day. It concludes that teachers need guidance to structure the evaluation of technology, to consider its educational affordances, its usability, its suitability for the students and the classroom environment and its fit to the teachers’ preferred pedagogies.