Location management and routing in urban vehicular ad hoc networks

In recent years, urban vehicular ad hoc networks (VANETs) are gaining importance for inter-vehicle communication, because they allow for the local communication between vehicles without any infrastructure, configuration effort, and without expensive cellular networks. But such architecture may increase the complexity of routing since there is no central control system in urban VANETs. Therefore, a challenging research task is to improve urban VANETs' routing efficiency. ^ Hence, in this dissertation we propose two location-based routing protocols and a location management protocol to facilitate location-based routing in urban VANETs. The Multi-hop Routing Protocol (MURU) is proposed to make use of predicted mobility and geometry map in urban VANETs to estimate a path's life time and set up robust end-to-end routing paths. The Light-weight Routing Protocol (LIRU) is proposed to take advantage of the node diversity under dynamic channel condition to exploit opportunistic forwarding to achieve efficient data delivery. A scalable location management protocol (MALM) is also proposed to support location-based routing protocols in urban VANETs. MALM uses high mobility in VANETs to help disseminate vehicles' historical location information, and a vehicle is able to implement Kalman-filter based predicted to predict another vehicle's current location based on its historical location information. ^

Orthogonal frequency division multiplexing based air interfaces and multiple input multiple output techniques in cooperative satellite communications for 4th generation mobile systems

Recently, wireless network technology has grown at such a pace that scientific research has become a practical reality in a very short time span. Mobile wireless communications have witnessed the adoption of several generations, each of them complementing and improving the former. One mobile system that features high data rates and open network architecture is 4G. Currently, the research community and industry, in the field of wireless networks, are working on possible choices for solutions in the 4G system. 4G is a collection of technologies and standards that will allow a range of ubiquitous computing and wireless communication architectures. The researcher considers one of the most important characteristics of future 4G mobile systems the ability to guarantee reliable communications from 100 Mbps, in high mobility links, to as high as 1 Gbps for low mobility users, in addition to high efficiency in the spectrum usage. On mobile wireless communications networks, one important factor is the coverage of large geographical areas. In 4G systems, a hybrid satellite/terrestrial network is crucial to providing users with coverage wherever needed. Subscribers thus require a reliable satellite link to access their services when they are in remote locations, where a terrestrial infrastructure is unavailable. Thus, they must rely upon satellite coverage. Good modulation and access technique are also required in order to transmit high data rates over satellite links to mobile users. This technique must adapt to the characteristics of the satellite channel and also be efficient in the use of allocated bandwidth. Satellite links are fading channels, when used by mobile users. Some measures designed to approach these fading environments make use of: (1) spatial diversity (two receive antenna configuration); (2) time diversity (channel interleaver/spreading techniques); and (3) upper layer FEC. The author proposes the use of OFDM (Orthogonal Frequency Multiple Access) for the satellite link by increasing the time diversity. This technique will allow for an increase of the data rate, as primarily required by multimedia applications, and will also optimally use the available bandwidth. In addition, this dissertation approaches the use of Cooperative Satellite Communications for hybrid satellite/terrestrial networks. By using this technique, the satellite coverage can be extended to areas where there is no direct link to the satellite. For this purpose, a good channel model is necessary.

Interações magnéticas e elétricas em GaMnAs

In this paper, we will address together the magnetic and electrical properties of a particular semiconductor, the GaMnAs. The treatment will be done analytically in the first part of the work, according to the computational method for simulation of physical systems through the implementation of the expressions obtained in the first part. All study of magnetic contribution will be made using an interaction Kondo type, using an approach by Green functions. The electrical part, which consists of the Coulomb interactions between carriers and Mn ions, will be treated within the approach of multiple scattering. The implementation of the proposed method will calculate the Green functions converged as multiple scattering solution and use them as a starting point for the calculation of the effective magnetic interactions between Mn ions mediated charge carriers. The concentration parameters were varied for Mn ions and carriers as well. The combination of these two parameters can lead to insulating, metal samples with carriers in Fermi level to low or high mobility. As a result a correlation between the obtained carrier mobility and the strength of magnetic interaction. The greater mobility, the greater the intensity of the interaction.

Solid-state synthesis of embedded single-crystal metal oxide and phosphate nanoparticles and in situ crystallization

A new solid state organometallic route to embedded nanoparticle-containing inorganic materials is shown, through pyrolysis of metal-containing derivatives of cyclotriphosphazenes. Pyrolysis in air and at 800 °C of new molecular precursors gives individual single-crystal nanoparticles of SiP2O7, TiO2, P4O7, WP2O7 and SiO2, depending on the precursor used. High resolution transmission electron microscopy investigations reveal, in most cases, perfect single crystals of metal oxides and the first nanostructures of negative thermal expansion metal phosphates with diameters in the range 2–6 nm for all products. While all nanoparticles are new by this method, WP2O7 and SiP2O7 nanoparticles are reported for the first time. In situ recrystallization formation of nanocrystals of SiP2O7 was also observed due to electron beam induced reactions during measurements of the nanoparticulate pyrolytic products SiO2 and P4O7. The possible mechanism for the formation of the nanoparticles at much lower temperatures than their bulk counterparts in both cases is discussed. Degrees of stabilization from the formation of P4O7 affects the nanocrystalline products: nanoparticles are observed for WP2O7, with coalescing crystallization occurring for the amorphous host in which SiP2O7 crystals form as a solid within a solid. The approach allows the simple formation of multimetallic, monometallic, metal-oxide and metal phosphate nanocrystals embedded in an amorphous dielectric. The method and can be extended to nearly any metal capable of successful coordination as an organometallic to allow embedded nanoparticle layers and features to be deposited or written on surfaces for application as high mobility pyrophosphate lithium–ion cathode materials, catalysis and nanocrystal embedded dielectric layers.

Fabrication of sub-10 nm lamellar structures by solvent vapour annealing of block copolymers

Fabrication of nanoscale patterns through the bottom-up approach of self-assembly of phase-separated block copolymers (BCP) holds promise for nanoelectronics applications. For lithographic applications, it is useful to vary the morphology of BCPs by monitoring various parameters to make “from lab to fab” a reality. Here I report on the solvent annealing studies of lamellae forming polystyrene-blockpoly( 4-vinylpyridine) (PS-b-P4VP). The high Flory-Huggins parameter (χ = 0.34) of PS-b-P4VP makes it an ideal BCP system for self-assembly and template fabrication in comparison to other BCPs. Different molecular weights of symmetric PS-b-P4VP BCPs forming lamellae patterns were used to produce nanostructured thin films by spin-coating from mixture of toluene and tetrahydrofuran(THF). In particular, the morphology change from micellar structures to well-defined microphase separated arrangements is observed. Solvent annealing provides a better alternative to thermal treatment which often requires long annealing periods. The choice of solvent (single and dual solvent exposure) and the solvent annealing conditions have significant effects on the morphology of films and it was found that a block neutral solvent was required to realize vertically aligned PS and P4VP lamellae. Here, we have followed the formation of microdomain structures with time development at different temperatures by atomic force microscopy (AFM). The highly mobilized chains phase separate quickly due to high Flory-Huggins (χ) parameter. Ultra-small feature size (~10 nm pitch size) nanopatterns were fabricated by using low molecular weight PSb- P4VP (PS and P4VP blocks of 3.3 and 3.1 kg mol-1 respectively). However, due to the low etch contrast between the blocks, pattern transfer of the BCP mask is very challenging. To overcome the etch contrast problem, a novel and simple in-situ hard mask technology is used to fabricate the high aspect ratio silicon nanowires. The lamellar structures formed after self-assembly of phase separated PS-b-P4VP BCPs were used to fabricate iron oxide nanowires which acted as hard mask material to facilitate the pattern transfer into silicon and forming silicon nanostructures. The semiconductor and optical industries have shown significant interest in two dimensional (2D) molybdenum disulphide (MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not ‘fab’ friendly and require harsh environments and processes. Here, I also report a novel method to prepare MoS2 layered structures via self-assembly of a PS-b-P4VP block copolymer system. The formation of the layered MoS2 was confirmed by XPS, Raman spectroscopy and high resolution transmission electron microscopy.

Growth and application of planar III-V semiconductor nanowires grown with MOCVD

The semiconductor nanowire has been widely studied over the past decade and identified as a promising nanotechnology building block with application in photonics and electronics. The flexible bottom-up approach to nanowire growth allows for straightforward fabrication of complex 1D nanostructures with interesting optical, electrical, and mechanical properties. III-V nanowires in particular are useful because of their direct bandgap, high carrier mobility, and ability to form heterojunctions and have been used to make devices such as light-emitting diodes, lasers, and field-effect transistors. However, crystal defects are widely reported for III-V nanowires when grown in the common out-of-plane <111>B direction. Furthermore, commercialization of nanowires has been limited by the difficulty of assembling nanowires with predetermined position and alignment on a wafer-scale. In this thesis, planar III-V nanowires are introduced as a low-defect and integratable nanotechnology building block grown with metalorganic chemical vapor deposition. Planar GaAs nanowires grown with gold seed particles self-align along the <110> direction on the (001) GaAs substrate. Transmission electron microscopy reveals that planar GaAs nanowires are nearly free of crystal defects and grow laterally and epitaxially on the substrate surface. The nanowire morphology is shown to be primarily controlled through growth temperature and an ideal growth window of 470 +\- 10 °C is identified for planar GaAs nanowires. Extension of the planar growth mode to other materials is demonstrated through growth of planar InAs nanowires. Using a sacrificial layer, the transfer of planar GaAs nanowires onto silicon substrates with control over the alignment and position is presented. A metal-semiconductor field-effect transistor fabricated with a planar GaAs nanowire shows bulk-like low-field electron transport characteristics with high mobility. The aligned planar geometry and excellent material quality of planar III-V nanowires may lead to highly integrated III-V nanophotonics and nanoelectronics.

Caractérisation des maladies respiratoires en lien avec les problématiques d’humidité excessive ou de moisissures dans les logements des étudiants universitaires

Résumé : PROBLÉMATIQUE: L’exposition résidentielle à l’humidité excessive ou aux moisissures est maintenant reconnue comme un facteur important influençant la santé respiratoire. Cette problématique a été peu étudiée chez les étudiants universitaires, bien que vulnérables par leur faible revenu et leur statut de locataire. OBJECTIFS: Cette maîtrise vise à décrire la prévalence (a) de l’exposition résidentielle à l’humidité excessive ou aux moisissures et (b) des maladies respiratoires chez les étudiants universitaires, ainsi qu’à (c) examiner l’association entre l’exposition résidentielle à l’humidité excessive ou aux moisissures et ces maladies. MÉTHODES: En 2014, une enquête électronique a été réalisée auprès de 2097 étudiants enregistrés à l’Université de Sherbrooke (Québec, Canada). Lorsque possible, des questions et des scores validés ont été utilisés pour estimer les prévalences des maladies respiratoires (rhinite allergique, asthme et infections respiratoires), de l’exposition résidentielle à l’humidité excessive ou aux moisissures et des covariables (ex. : revenu annuel familial, statut tabagique, atopie familiale, caractéristiques de l’étudiant). Les associations entre cette exposition et ces maladies ont d’abord été examinées par des tests de chi-carré en utilisant un seuil alpha de 0,05. Des régressions logistiques multivariées ont ensuite été utilisées pour déterminer les associations brutes et ajustée entre cette exposition et les maladies respiratoires. Les analyses descriptives ont été pondérées pour le sexe, l’âge et le campus d’étude. RÉSULTATS: L’exposition à l’humidité excessive ou aux moisissures était fréquente parmi les participants (36,0%; Intervalle de confiance (IC)95% : 33,9-38,1). Ceux-ci ont également été nombreux à rapporter une rhinite allergique (23,9%; IC95% :22,0-25,8), de l’asthme (32,6%; IC95% : 30,5-34,7) et des infections respiratoires (19,4%; IC95% :17,7-21,2) au cours de la dernière année. Après ajustement, les associations demeuraient significatives entre l’exposition à l’humidité excessive ou aux moisissures et la rhinite allergique (Rapport de cote (RC) : 1,30; IC95% : 1.05-1.60), l’asthme RC : 1,75; IC95% : 1,42-2,16), mais pas les infections respiratoires (RC : 1,07; IC95% : 0,85-1.35). CONCLUSIONS: La prévalence élevée de l’exposition résidentielle des étudiants universitaires à l’humidité excessive ou aux moisissures, de même que son association avec l’asthme et la rhinite allergique, mettent en lumière sa contribution potentielle à la forte prévalence des maladies respiratoires ayant une composante allergique dans cette population. Cette étude fournit un nouveau levier pour les organisations de santé publique et leurs partenaires afin d’adapter les stratégies préventives ciblant les logements insalubres, particulièrement chez les populations vulnérables.

Nonlinear Optics and Carrier Dynamics in Nanostructured and Two-Dimensional Materials

Understanding and measuring the interaction of light with sub-wavelength structures and atomically thin materials is of critical importance for the development of next generation photonic devices.  One approach to achieve the desired optical properties in a material is to manipulate its mesoscopic structure or its composition in order to affect the properties of the light-matter interaction.  There has been tremendous recent interest in so called two-dimensional materials, consisting of only a single to a few layers of atoms arranged in a planar sheet.  These materials have demonstrated great promise as a platform for studying unique phenomena arising from the low-dimensionality of the material and for developing new types of devices based on these effects.  A thorough investigation of the optical and electronic properties of these new materials is essential to realizing their potential.  In this work we present studies that explore the nonlinear optical properties and carrier dynamics in nanoporous silicon waveguides, two-dimensional graphite (graphene), and atomically thin black phosphorus. We first present an investigation of the nonlinear response of nanoporous silicon optical waveguides using a novel pump-probe method. A two-frequency heterodyne technique is developed in order to measure the pump-induced transient change in phase and intensity in a single measurement. The experimental data reveal a characteristic material response time and temporally resolved intensity and phase behavior matching a physical model dominated by free-carrier effects that are significantly stronger and faster than those observed in traditional silicon-based waveguides.  These results shed light on the large optical nonlinearity observed in nanoporous silicon and demonstrate a new measurement technique for heterodyne pump-probe spectroscopy. Next we explore the optical properties of low-doped graphene in the terahertz spectral regime, where both intraband and interband effects play a significant role. Probing the graphene at intermediate photon energies enables the investigation of the nonlinear optical properties in the graphene as its electron system is heated by the intense pump pulse. By simultaneously measuring the reflected and transmitted terahertz light, a precise determination of the pump-induced change in absorption can be made. We observe that as the intensity of the terahertz radiation is increased, the optical properties of the graphene change from interband, semiconductor-like absorption, to a more metallic behavior with increased intraband processes. This transition reveals itself in our measurements as an increase in the terahertz transmission through the graphene at low fluence, followed by a decrease in transmission and the onset of a large, photo-induced reflection as fluence is increased.  A hybrid optical-thermodynamic model successfully describes our observations and predicts this transition will persist across mid- and far-infrared frequencies.  This study further demonstrates the important role that reflection plays since the absorption saturation intensity (an important figure of merit for graphene-based saturable absorbers) can be underestimated if only the transmitted light is considered. These findings are expected to contribute to the development of new optoelectronic devices designed to operate in the mid- and far-infrared frequency range.  Lastly we discuss recent work with black phosphorus, a two-dimensional material that has recently attracted interest due to its high mobility and direct, configurable band gap (300 meV to 2eV), depending on the number of atomic layers comprising the sample. In this work we examine the pump-induced change in optical transmission of mechanically exfoliated black phosphorus flakes using a two-color optical pump-probe measurement. The time-resolved data reveal a fast pump-induced transparency accompanied by a slower absorption that we attribute to Pauli blocking and free-carrier absorption, respectively. Polarization studies show that these effects are also highly anisotropic - underscoring the importance of crystal orientation in the design of optical devices based on this material. We conclude our discussion of black phosphorus with a study that employs this material as the active element in a photoconductive detector capable of gigahertz class detection at room temperature for mid-infrared frequencies.

Role of climate on barn owls road-kill likelihood and the effect on population viability in future climate change

Roads represent a new source of mortality due to animal-vehicle risk of collision threatening log-term populations’ viability. Risk of road-kill depends on species sensitivity to roads and their specific life-history traits. The risk of road mortality for each species depends on the characteristics of roads and bioecological characteristics of the species. In this study we intend to know the importance of climatic parameters (temperature and precipitation) together with traffic and life history traits and understand the role of drought in barn owl population viability, also affected by road mortality in three scenarios: high mobility, high population density and the combination of previous scenarios (mixed) (Manuscript). For the first objective we correlated the several parameters (climate, traffic and life history traits). We used the most correlated variables to build a predictive mixed model (GLMM) the influence of the same. Using a population model we evaluated barn owl population viability in all three scenarios. Model revealed precipitation, traffic and dispersal have negative relationship with road-kills, although the relationship was not significant. Scenarios showed different results, high mobility scenario showed greater population depletion, more fluctuations over time and greater risk of extinction. High population density scenario showed a more stable population with lower risk of extinction and mixed scenario showed similar results as first scenario. Climate seems to play an indirect role on barn owl road-kills, it may influence prey availability which influences barn owl reproductive success and activity. Also, high mobility scenario showed a greater negative impact on viability of populations which may affect their ability and resilience to other stochastic events. Future research should take in account climate and how it may influence species life cycles and activity periods for a more complete approach of road-kills. Also it is important to make the best mitigation decisions which might include improving prey quality habitat.

Novel strategies for targeting innate immune responses to influenza.

NlmCategory="UNASSIGNED">We previously reported that TLR4(-/-) mice are refractory to mouse-adapted A/PR/8/34 (PR8) influenza-induced lethality and that therapeutic administration of the TLR4 antagonist Eritoran blocked PR8-induced lethality and acute lung injury (ALI) when given starting 2 days post infection. Herein we extend these findings: anti-TLR4- or -TLR2-specific IgG therapy also conferred significant protection of wild-type (WT) mice from lethal PR8 infection. If treatment is initiated 3 h before PR8 infection and continued daily for 4 days, Eritoran failed to protect WT and TLR4(-/-) mice, implying that Eritoran must block a virus-induced, non-TLR4 signal that is required for protection. Mechanistically, we determined that (i) Eritoran blocks high-mobility group B1 (HMGB1)-mediated, TLR4-dependent signaling in vitro and circulating HMGB1 in vivo, and an HMGB1 inhibitor protects against PR8; (ii) Eritoran inhibits pulmonary lung edema associated with ALI; (iii) interleukin (IL)-1β contributes significantly to PR8-induced lethality, as evidenced by partial protection by IL-1 receptor antagonist (IL-1Ra) therapy. Synergistic protection against PR8-induced lethality was achieved when Eritoran and the antiviral drug oseltamivir were administered starting 4 days post infection. Eritoran treatment does not prevent development of an adaptive immune response to subsequent PR8 challenge. Overall, our data support the potential of a host-targeted therapeutic approach to influenza infection.Mucosal Immunology advance online publication 27 January 2016; doi:10.1038/mi.2015.141.

A formação das Forças e Serviços de Segurança na União Europeia rumo a uma política europeia de segurança comum

A criminalidade organizada opera cada vez mais em colaboração alargada, elevada mobilidade e grande diversificação nas suas formas de atuar. Após os recentes atentados terroristas em Paris e em Bruxelas as preocupações relacionadas com as ameaças à segurança da União Europeia (UE) estão cada vez mais na agenda política. O objetivo geral desta investigação foi analisar a importância que a formação comum das polícias da UE e o seu papel na Academia Europeia de Polícia (CEPOL) têm para a Guarda Nacional Republicada (GNR), compreendendo a importância desta formação na implementação da Política Comum de Segurança e Defesa (PCSD). Esta investigação procurou uma recolha de informação adequada, possibilitando a compreensão do fenómeno em estudo, adotando uma estratégia de investigação qualitativa, concretizada a partir de uma pesquisa documental e um inquérito por entrevista semiestruturada, cujos dados foram objeto de análise de conteúdo. Como resultado principal destacou-se o diagnóstico que fundamenta eventuais mudanças ou orientações que a GNR possa vir a prosseguir no âmbito da sua posição na CEPOL. Concluiu-se que a prossecução da segurança na UE exige uma adequada articulação entre a segurança interna e a segurança externa, bem como da importância das agências da UE em geral, e em particular, da CEPOL cuja missão de formação comum é essencial. Abstract: Organised crime is increasingly operating in extended collaboration, high mobility and great diversity in their ways of acting. After the recent terrorist attacks in Paris and Brussels the concerns about threats to security of the European Union (EU) are increasingly on the political agenda. The general objective of this research was to analyse the importance of common training in the context of the EU's police forces and its role in the European Police College (CEPOL) have in the Portuguese Guarda Nacional Republicana (GNR), understanding the importance of this training in the implementation of the Common Security and Defence Policy (CSDP). This research looked for a collection of adequate information, adopting a qualitative research strategy, enabled the understanding of the phenomenon under study, adopting a qualitative research strategy, implemented from desk research and a survey by semistructured interviews, whose data were subject to content analysis. The main result highlighted the diagnosis set that underlies any changes or guidelines that GNR is likely to continue in its position on CEPOL. It was concluded that further security in the EU requires proper coordination between internal security and external security, and the importance of EU agencies in general, and in particular CEPOL whose common training mission is essential.

Estudo sobre as principais características das viaturas táticas ligeiras blindadas para o Exército português.

O presente Trabalho de Investigação Aplicada tem como estudo identificar as principais características das viaturas táticas ligeiras blindadas, que irão equipar o Exército Português, por forma a garantir a mobilidade tática terrestre. Com esta investigação pretende-se identificar a configuração do ambiente operacional, onde as viaturas das Forças Nacionais Destacadas tem sido empregues. De igual modo identificar as caraterísticas das viaturas táticas ligeiras blindadas disponíveis no mercado da indústria de defesa passíveis de serem adquiridas, descrevendo ainda o tipo de operações em que as forças do Exército Português tem participado, utilizando viaturas táticas ligeiras. Esta investigação tem como principal objetivo identificar as principais caraterísticas das viaturas táticas ligeiras blindadas a adquirir pelo Exército Português, para se adaptarem à realidade atual do ambiente operacional onde Portugal participa com forças, e fazer uma caracterização da mais recente viatura, a Pandur II 8x8, e a viatura com mais presenças em teatros de operações, o High Mobility Multipurpose Wheeled Vehicle. Para alcançar este objetivo principal, foi utilizado o método dedutivo partindo do ambiente operacional dos diversos Teatros de Operações em que Portugal tem empregue forças, para as principais caraterísticas das viaturas. O ambiente operacional que reside hoje em dia, nos teatros de operações, é caraterizado por assimetrias, resultantes de novas ameaças. Estas necessitam de esforços, por parte das forças militares para se adaptarem. As caraterísticas das viaturas táticas ligeiras blindadas têm vindo a sofrer algumas alterações na sua proteção e mobilidade, onde apresentam melhorias técnicas, face às inovações tecnológicas, mas há outras, como o poder de fogo que podem vir a ser colmatadas no futuro.

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment.

Young adults in rural tourism areas

This thesis examines how tourism affects conditions for young adults in rural areas. Such a study lies at the intersection of research about tourism impacts, adult transition, and rural areas. The aim is to examine how largescale tourism affects the opportunities for young adults living in rural areas; their perception of place and the perceived opportunities and obstacles that tourism provides. The thesis utilizes a mixed method approach. A quantitative study based on micro-data on individuals identifies the patterns and magnitudes of the mechanisms by which tourism affects population change among young adults. Interview methods are used in the case study area, Sälen, to investigate these mechanisms in depth. Finally, the rural–urban dichotomy is explored in a conceptual study that asks how tourism affects the perception of a local village as either rural or urban. Young inhabitants in rural areas are rarely considered in tourism research; therefore, the main contribution of this thesis is that it illuminates how tourism affects conditions for young adults in rural areas. The thesis reveals a substantial impact on the adult transition, mainly due to easier access to the labor market and a good supply of jobs during the high season. Further, the large number of people passing through creates flows of opportunities to make friends, get a job, or just meet people. All of these factors contribute to high mobility in these places, and to the perception of them as places where things happen. The high mobility in Sälen implies that fixed migrant categories (such as stayers and leavers) are largely insufficient. The tourism environment creates a space that is always under construction and continually producing new social relations mainly perceived as opportunities. Conceptualizing this as a modern rurality is a way to move beyond the often implicit notions of urban as modern and rural as traditional.

Nitrate in groundwater in a recharge area of Guarany aquifer in Brazil.

The region of Ribeirão Preto City located in São Paulo State, southeastern Brazil, is an important sugarcane, soybean and corn producing area. This region is also an important recharge area (Espraiado) for groundwater of the Guarany aquifer, a water supply source for the city and region. It has an intercontinental extension that comprises areas of eight Brazilian states, as well as significant portions of other South American countries like Argentina, Uruguay, and Paraguay, with a total area of approximately 1,200,000 Km2. Due to the high permeability of some soils present in this region, the high mobility of the herbicides and fertilizers applied, and being a recharge area, it is important to investigate the potential transport of applied fertilizers to underlying aquifer. The cultivation sugar cane in this area demands the frequent use of nitrogen as fertilizer. This research was conducted to characterize the potential contamination of groundwater with nitrogen in the recharge area of groundwater. Seven groundwater sample points were selected in the Espraiado stream watershed, during the years of 2005 and 2006. Samples were collected during the months of March, July, and December of each year. Three replications were collected at each site. Groundwater was also collected during the same months from county groundwater wells located throughout the city. The following six wells were studied: Central, Palmares, Portinari, Recreio Internacional, São Sebastião, and São José. Nitrate water samples were analyzed by Cadmium Reduction Method. No significant amount of nitrate was found in the recharge, agricultural, area. However, nitrate levels were detected at concentrations higher than the Maximum Concentration Level (MCL) of 10mg/L in downtown, urban, well located away from agricultural sites with no history of fertilizer or nitrogen application.