Uma investigação sobre a forma de governo e o modo de governar da República

Esta dissertação procura, utilizando o pensamento de Maquiavel, Montesquieu e Madison, estudar o governo republicano a partir de dois paradigmas distintos, a saber, a forma de governo e o modo de governar. O primeiro diz respeito ao seu caráter institucional do Estado e da atividade política e se torna inteligível por uma compreensão teórica da política, ou seja, sobre o que lhe confere formato. O segundo se refere aos modos de ação do governo independentemente de seu formato institucional e pode ser compreendido por aspectos sociológicos, pois diz respeito mais à sociedade. Maquiavel e, de um ponto de vista, Montesquieu podem ser considerados os principais representantes da tradição que identifica na forma de governo a definição da república. Montesquieu, sob outra perspectiva, e Madison são os que mais se dedicaram ao modo de governar. Além disso, este estudo procura abordar a liberdade como categoria identitária da política e, assim, formando um todo coeso da tradição republicana.

Morar e trabalhar: a pesca artesanal e o seu elo com o lugar

Este trabalho busca realizar uma discussão de grande relevância para o entendimento do que é ser pescador artesanal em tempos em que a modernização do espaço se faz pujante e intende a subjugar suas formas de trabalho e de vida. Em decorrência disto, pretende-se aqui estimular reflexões em torno da relação existente entre trabalho e moradia para estes sujeitos, os quais vivem em pleno contexto metropolitano. Para tal tarefa, serão elucidadas questões centrais que abrangem o cotidiano dos pescadores artesanais que vivem no bairro de Pedra de Guaratiba, localizado na Zona Oeste do município do Rio de Janeiro (RJ), às margens da Baía de Sepetiba. Sendo assim, realizaremos uma tentativa de compreensão analítica dos agentes de base popular, suas experiências de vida e seus conflitos no que se refere à produção social da metrópole. Veremos que os pescadores artesanais representam uma categoria de extrema complexidade e que não é compreendida sequer parcialmente pelas instituições públicas que regem o seu ordenamento. Complexidade esta que se inscreve também na relação entre moradia e trabalho na vida desses sujeitos, se tornando assim, um dos pilares de sustentação de suas existências e, consequentemente, do seu próprio resistir. Para a percepção dessas relações e dos sentidos (valores) que animam a vida desses homens e mulheres, buscamos a realização de uma metodologia em que o pesquisador torna o seu olhar sensível ao reconhecimento dos elos que unem esses sujeitos aos seus lugares de trabalho e de vida, entendendo assim as dinâmicas responsáveis por construir as peculiaridades que os diferenciam (mas não os excluem) dos demais trabalhadores urbanos. Por fim, chegaremos ao entendimento de que morar e trabalhar para os pescadores artesanais são pares indissociáveis, os quais contribuem para a fortificação da categoria em tempos de grande adversidade

Three-dimensional ultrasound imaging.

This review is about the development of three-dimensional (3D) ultrasonic medical imaging, how it works, and where its future lies. It assumes knowledge of two-dimensional (2D) ultrasound, which is covered elsewhere in this issue. The three main ways in which 3D ultrasound may be acquired are described: the mechanically swept 3D probe, the 2D transducer array that can acquire intrinsically 3D data, and the freehand 3D ultrasound. This provides an appreciation of the constraints implicit in each of these approaches together with their strengths and weaknesses. Then some of the techniques that are used for processing the 3D data and the way this can lead to information of clinical value are discussed. A table is provided to show the range of clinical applications reported in the literature. Finally, the discussion relating to the technology and its clinical applications to explain why 3D ultrasound has been relatively slow to be adopted in routine clinics is drawn together and the issues that will govern its development in the future explored.

Distribution of persistent organic contaminants in canyons and on the continental shelf off central California

The National Status and Trends (NS&T) Program has conducted studies to determine the spatial extent and severity of chemical contamination and associated adverse biological effects in coastal bays and estuaries of the United States since 1991. Sediment contamination in U.S. coastal areas is a major environmental issue because of its potential toxic effects on biological resources and often, indirectly, on human health. Thus, characterizing and delineating areas of sediment contamination and toxicity and demonstrating their effect(s) on benthic living resources are therefore important goals of coastal resource management at NOAA. The National Centers for Coastal Ocean Science, and the Office of National Marine Sanctuaries, in cooperation with the U.S. Geological Survey (USGS), University of California Moss Landing Marine Lab (MLML), and the Monterey Bay Aquarium Research Institute (MBARI), conducted ecosystem monitoring and characterization studies within and between marine sanctuaries along the California coast in 2002 and 2004 on the NOAA RV McArthur. One of the objectives was to perform a systematic assessment of the chemical and physical habitats and associated biological communities in soft bottom habitats on the continental shelf and slope in the central California region. This report addresses the magnitude and extent of chemical contamination, and contaminant transport patterns in the region. Ongoing studies of the benthic community are in progress and will be reported in an integrated assessment of habitat quality and the parameters that govern natural resource distributions on the continental margin and in canyons in the region.

Strengthening collective action to address resource conflict in Lake Kariba, Zambia

Where natural resources are a key component of the rural economy, the ability of the poor to realize their visions for the future depends significantly on institutional structures that govern resource access and management. This case study reports on an initiative on the shores of Lake Kariba in Zambia, where lakeshore residents face competition over fishing, tourism, and commercial aquaculture. Multistakeholder dialogue produced agreements with investors and increased accountability of state agencies and traditional leaders, enabling communities to have greater influence over their futures through improvements in aquatic resource governance. The report documents the rationale for the approach followed and steps in the capacity-building process, discusses obstacles encountered, and identifies lessons for policymakers and practitioners seeking to implement a similar approach.

Reproductive engineering in crustacean aquaculture

Crustacean aquaculture industry in India suffers greatly from lack of technological developments. A major constraint in this enterprise is the limitation of seed stock availability. A critical appraisal is made of the techniques used in the manipulation of reproductive processes in order to augment year-round production of seeds. A new possibility of induced ovarian maturation in crustaceans is by administering steroid hormones of vertebrate source. Environmental factors are known to govern the gametogenic cycle of marine crustaceans. Cryopreservation of male gametes and artificial insemination by way of spermatophore transfer could solve some of the problems of mating under laboratory conditions.

Materials selection in mechanical design

A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a new way of displaying material property data; and performance indices: combinations of material properties which govern performance. Optimization methods are employed for simultaneous selection of both material and shape.

Towards identification of a general model of damping

Characterization of damping forces in a vibrating structure has long been an active area of research in structural dynamics. In spite of a large amount of research, understanding of damping mechanisms is not well developed. A major reason for this is that unlike inertia and stiffness forces it is not in general clear what are the state variables that govern the damping forces. The most common approach is to use `viscous damping' where the instantaneous generalized velocities are the only relevant state variables. However, viscous damping by no means the only damping model within the scope of linear analysis. Any model which makes the energy dissipation functional non-negative is a possible candidate for a valid damping model. This paper is devoted to develop methodologies for identification of such general damping models responsible for energy dissipation in a vibrating structure. The method uses experimentally identified complex modes and complex natural frequencies and does not a-priori assume any fixed damping model (eg., viscous damping) but seeks to determine parameters of a general damping model described by the so called `relaxation function'. The proposed method and several related issues are discussed by considering a numerical example of a linear array of damped spring-mass oscillators.

Salinity measurements and use of the Practical Salinity Scale (PSS)

Salinity, temperature and pressure are parameters which govern the oceanographic state of a marine water body and together they make up density of seawater. In this contribution we will focus our interest on one of these parameters, the salinity: accuracy in relation to different purposes as well as observation technique and instrumentation. We will also discuss the definition of salinity. For example most of the Indian Ocean waters are within the salinity range from 34.60-34.80, which emphasize the importance of careful observations and clear definitions of salinity, in such a way that it is possible to define water masses and predict their movements. In coastal waters the salinity usually features much larger variation in time and space and thus less accuracy is sometimes needed. Salinity has been measured and defined in several ways over the past century. While early measurements were based on the amount of salt in a sea water sample, today the salinity of seawater is most often determined from its conductivity. As conductivity is a function of salinity and temperature, determination involves also measurement of the density of seawater is now more precisely estimated and thus the temperature. As a result of this method the Practical Salinity Scale (PSS) was developed. The best determination of salinity from conductivity and the temperature measurements gives salinity with resolution of 0.001 psu, while the accuracy of titration method was about ± 0.02‰. Because of that, even calculation of movements in the ocean is also improved.

Occurrence of whale sharks in coastal waters in the Indian Ocean: an interesting coincidence

Salinity, temperature and pressure are parameters which govern the oceanographic state of a marine water body and together they make up density of seawater. In this contribution we will focus our interest on one of these parameters, the salinity: accuracy in relation to different purposes as well as observation technique and instrumentation. We will also discuss the definition of salinity. For example most of the Indian Ocean waters are within the salinity range from 34.60-34.80, which emphasize the importance of careful observations and clear definitions of salinity, in such a way that it is possible to define water masses and predict their movements. In coastal waters the salinity usually features much larger variation in time and space and thus less accuracy is sometimes needed. Salinity has been measured and defined in several ways over the past century. While early measurements were based on the amount of salt in a sea water sample, today the salinity of seawater is most often determined from its conductivity. As conductivity is a function of salinity and temperature, determination involves also measurement of the density of seawater is now more precisely estimated and thus the temperature. As a result of this method the Practical Salinity Scale (PSS) was developed. The best determination of salinity from conductivity and the temperature measurements gives salinity with resolution of 0.001 psu, while the accuracy of titration method was about ± 0.02‰. Because of that, even calculation of movements in the ocean is also improved.

Corner effect and asymmetry in transonic channel flows

An experimental and numerical investigation into transonic shock/boundary-layer interactions in rectangular ducts has been performed. Experiments have shown that flow development in the corners of transonic shock/boundary-layer interactions in confined channels can have a significant impact on the entire flowfield. As shock strength is increased from M∞ = 1:3 to 1.5, the flowfield becomes very slightly asymmetrical. The interaction of corner flows with one another is thought to be a potential cause of this asymmetry. Thus, factors that govern the size of corner interactions (such as interaction strength) and their proximity to one another (such as tunnel aspect ratio) can affect flow symmetry. The results of the computational study show reasonable agreement with experiments, although simulations with particular turbulence models predict highly asymmetrical solutions for flows that were predominantly symmetrical in experiments. These discrepancies are attributed to the tendency of numerical schemes to overprediction corner-interaction size, and this also accounts for why computational fluid dynamics predicts the onset of asymmetry at lower shock strengths than in experiments. The findings of this study highlight the importance of making informed decisions about imposing artificial constraints on symmetry and boundary conditions for internal transonic flows. Future effort into modeling corner flows accurately is required. Copyright © 2011 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Magnetically actuated artificial cilia: the effect of fluid inertia.

Natural cilia are hairlike microtubule-based structures that are able to move fluid on the micrometer scale using asymmetric motion. In this article, we follow a biomimetic approach to design artificial cilia lining the inner surfaces of microfluidic channels with the goal of propelling fluid. The artificial cilia consist of polymer films filled with superparamagnetic nanoparticles, which can mimic the motion of natural cilia when subjected to a rotating magnetic field. To obtain the magnetic field and associated magnetization local to the cilia, we solve the Maxwell equations, from which the magnetic body moments and forces can be deduced. To obtain the ciliary motion, we solve the dynamic equations of motion, which are then fully coupled to the Navier-Stokes equations that describe the fluid flow around the cilia, thus taking full account of fluid inertial forces. The dimensionless parameters that govern the deformation behavior of the cilia and the associated fluid flow are arrived at using the principle of virtual work. The physical response of the cilia and the fluid flow for different combinations of elastic, fluid viscous, and inertia forces are identified.

The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation.

The biomechanisms that govern the response of chondrocytes to mechanical stimuli are poorly understood. In this study, a series of in vitro tests are performed, in which single chondrocytes are subjected to shear deformation by a horizontally moving probe. Dramatically different probe force-indentation curves are obtained for untreated cells and for cells in which the actin cytoskeleton has been disrupted. Untreated cells exhibit a rapid increase in force upon probe contact followed by yielding behaviour. Cells in which the contractile actin cytoskeleton was removed exhibit a linear force-indentation response. In order to investigate the mechanisms underlying this behaviour, a three-dimensional active modelling framework incorporating stress fibre (SF) remodelling and contractility is used to simulate the in vitro tests. Simulations reveal that the characteristic force-indentation curve observed for untreated chondrocytes occurs as a result of two factors: (i) yielding of SFs due to stretching of the cytoplasm near the probe and (ii) dissociation of SFs due to reduced cytoplasm tension at the front of the cell. In contrast, a passive hyperelastic model predicts a linear force-indentation curve similar to that observed for cells in which the actin cytoskeleton has been disrupted. This combined modelling-experimental study offers a novel insight into the role of the active contractility and remodelling of the actin cytoskeleton in the response of chondrocytes to mechanical loading.

Syllable language models for Mandarin speech recognition: exploiting character language models.

Mandarin Chinese is based on characters which are syllabic in nature and morphological in meaning. All spoken languages have syllabiotactic rules which govern the construction of syllables and their allowed sequences. These constraints are not as restrictive as those learned from word sequences, but they can provide additional useful linguistic information. Hence, it is possible to improve speech recognition performance by appropriately combining these two types of constraints. For the Chinese language considered in this paper, character level language models (LMs) can be used as a first level approximation to allowed syllable sequences. To test this idea, word and character level n-gram LMs were trained on 2.8 billion words (equivalent to 4.3 billion characters) of texts from a wide collection of text sources. Both hypothesis and model based combination techniques were investigated to combine word and character level LMs. Significant character error rate reductions up to 7.3% relative were obtained on a state-of-the-art Mandarin Chinese broadcast audio recognition task using an adapted history dependent multi-level LM that performs a log-linearly combination of character and word level LMs. This supports the hypothesis that character or syllable sequence models are useful for improving Mandarin speech recognition performance.

Classical plume theory: 1937-2010 and beyond

Developing a theoretical description of turbulent plumes, the likes of which may be seen rising above industrial chimneys, is a daunting thought. Plumes are ubiquitous on a wide range of scales in both the natural and the man-made environments. Examples that immediately come to mind are the vapour plumes above industrial smoke stacks or the ash plumes forming particle-laden clouds above an erupting volcano. However, plumes also occur where they are less visually apparent, such as the rising stream of warmair above a domestic radiator, of oil from a subsea blowout or, at a larger scale, of air above the so-called urban heat island. In many instances, not only the plume itself is of interest but also its influence on the environment as a whole through the process of entrainment. Zeldovich (1937, The asymptotic laws of freely-ascending convective flows. Zh. Eksp. Teor. Fiz., 7, 1463-1465 (in Russian)), Batchelor (1954, Heat convection and buoyancy effects in fluids. Q. J. R. Meteor. Soc., 80, 339-358) and Morton et al. (1956, Turbulent gravitational convection from maintained and instantaneous sources. Proc. R. Soc. Lond. A, 234, 1-23) laid the foundations for classical plume theory, a theoretical description that is elegant in its simplicity and yet encapsulates the complex turbulent engulfment of ambient fluid into the plume. Testament to the insight and approach developed in these early models of plumes is that the essential theory remains unchanged and is widely applied today. We describe the foundations of plume theory and link the theoretical developments with the measurements made in experiments necessary to close these models before discussing some recent developments in plume theory, including an approach which generalizes results obtained separately for the Boussinesq and the non-Boussinesq plume cases. The theory presented - despite its simplicity - has been very successful at describing and explaining the behaviour of plumes across the wide range of scales they are observed. We present solutions to the coupled set of ordinary differential equations (the plume conservation equations) that Morton et al. (1956) derived from the Navier-Stokes equations which govern fluid motion. In order to describe and contrast the bulk behaviour of rising plumes from general area sources, we present closed-form solutions to the plume conservation equations that were achieved by solving for the variation with height of Morton's non-dimensional flux parameter Γ - this single flux parameter gives a unique representation of the behaviour of steady plumes and enables a characterization of the different types of plume. We discuss advantages of solutions in this form before describing extensions to plume theory and suggesting directions for new research. © 2010 The Author. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.