Report of Investigation on the Physical Characteristics of the Oil Sands from the Cut Bank Field, Montana

The purpose of this research was to study the physical characteristics, mainly, porosity and permeability of the oil sands from the Cut Bank field, Glacier County, Montana. In so doing, a better understanding of the relation­ship of these physical characteristics to one another and to the pool itself could be obtained.

A Surface Displacement Analysis for Volcan Pacaya from October 2001 through March 2013 by Means of 3-D Modeling of Precise Position GPS Data

Volcán Pacaya is one of three currently active volcanoes in Guatemala. Volcanic activity originates from the local tectonic subduction of the Cocos plate beneath the Caribbean plate along the Pacific Guatemalan coast. Pacaya is characterized by generally strombolian type activity with occasional larger vulcanian type eruptions approximately every ten years. One particularly large eruption occurred on May 27, 2010. Using GPS data collected for approximately 8 years before this eruption and data from an additional three years of collection afterwards, surface movement covering the period of the eruption can be measured and used as a tool to help understand activity at the volcano. Initial positions were obtained from raw data using the Automatic Precise Positioning Service provided by the NASA Jet Propulsion Laboratory. Forward modeling of observed 3-D displacements for three time periods (before, covering and after the May 2010 eruption) revealed that a plausible source for deformation is related to a vertical dike or planar surface trending NNW-SSE through the cone. For three distinct time periods the best fitting models describe deformation of the volcano: 0.45 right lateral movement and 0.55 m tensile opening along the dike mentioned above from October 2001 through January 2009 (pre-eruption); 0.55 m left lateral slip along the dike mentioned above for the period from January 2009 and January 2011 (covering the eruption); -0.025 m dip slip along the dike for the period from January 2011 through March 2013 (post-eruption). In all bestfit models the dike is oriented with a 75° westward dip. These data have respective RMS misfit values of 5.49 cm, 12.38 cm and 6.90 cm for each modeled period. During the time period that includes the eruption the volcano most likely experienced a combination of slip and inflation below the edifice which created a large scar at the surface down the northern flank of the volcano. All models that a dipping dike may be experiencing a combination of inflation and oblique slip below the edifice which augments the possibility of a westward collapse in the future.

Mineral Occurences in Certain Pegmatite Dikes in Southwestern Montana

Pegmatite dikes are rather common in occurrence in parts of southwestern Montana, particularly in a region to the east of the Tobacco Root range 50 to 75 miles southeast of Butte.

An Experimental Investigation of the Age Hardening of Nickel with Boron

Since 1911, at which time, the age hardening phenomenon of duralumin was discovered by Film, much re­search has been carried on investigating the various alloy systems. The successful application of age hardening to the copper aluminum system (duralumin) has indicated the possibility of hardening practically all the metals in the same way.

The Velocity of Falling Particles in a Liquid Medium

The investigation was prompted by the fact that there seemed to be some discrepancy between the results published by Richards,and the empirical figures used in classification and in gravity concentration. Further, the work of Richards was restricted to quartz and galena whereas this study also includes pyrite and calcite.

The Recovery of Zinc from Butte Mine Waters

Very little work has been done towards the recovery of zinc from mine water because the zinc content of the water is generally low. As different from copper, which can very easily be replaced by iron in any of its solutions, zinc is very high up in the electro-chemical series and so the few metals above zinc, most of which are rare and hence expensive, cannot be used to replace zinc from its solution.

Polishing Mineral Specimens by the Use of an Optical Polishing Machine

The problem in this investigation was to determine if mineral specimens mounted in bakelite, or lucite, could be polished for microscopic examination by the use of an optical polishing machine, and if this method would cut down the length of time required to polish specimens by the methods now in use.

Electrical Resistivity Measurements of Powder Metal Compacts

This work, as it was originally planned, was the arranging of an apparatus whereby electrical resistivity measurements could be made on powder compacts. It was also to include measurements on a series of copper-nickel compacts both before and after sintering.

Upper Mississippian Faunas of Western Montana

The author has made a study of an assemblage of fossils from the Blacktail Range near Dillon Montana with the purpose in view of attempting a correlation of that group with the fauna of the Big Snowy Group. Fossils have also been obtained from a limestone formation in northwestern Montana and from four different areas in the Amsden formation in central and western Mont­ana.

Geologic Field Mapping in an Area Eight Miles North of Three Forks, Montana

The Three Forks are includes parts of Jefferson, Madison, Broadwater Pond Gallatin counties, Montana. Sedimentary formations lie at the surface nearly everywhere in the area, and the rugged surface topography has been developed through the folding and tilting of these formations and their dif­ferential erosion.

Insoluble Residues of the Lower Mississippian Limestones of the Madison Group

The correlation of non-fossiliferous drill samples is one of the difficult problems that is en­countered in sub-surface stratigraphy. In order to truly correlate a formation, it must have some dis tinctive features and have an areal persistence of these features. These requirements are probably met best by limestone.

The Application of a Laboratory Induction Furnace to the Selective Smelting of a Montana Chromite Concentrate

The purpose of this experimental work was to determine with the utilization of a laboratory sized induction furnace a method whereby a high-iron Montana chromite concentrate could be successfully smelted to yield a product suitable for the subsequent production of standard ferrochrome.

An Investigation of the Age-Hardening of Copper with Nickel-Boron Compounds

Boron is an element whose metallurgical possibil­ities have never been fully investigated. The principal reason for this fact seems to lie in the difficulties encountered in preparing elemental boron and its various intermetallic compounds.

Induction Furnace Smelting of Montana Chromite

In 1939 the total world production of crude chromite was approximately 1,167,000 metric tons; of which the United States produced only 3,672 metric tons and imported over 317,500 metric tons. Imports came mostly from the Philippine Islands, Cuba, South Africa, and Rhodesia.

An Investigation of the Ores of the Big Seven Mine, Neihart, Montana

During the course of this investigation of the ores of the Big Seven mine, Neihart, Montana, the writer has attempted, through a mi­croscopic study of polished sections, to ascertain the hypogene or supergene character of the ore minerals present in the ore suite.