Constraints on Miocene oceanography and climate in the Western and Central Paratethys: O-, Sr-, and Nd-isotope compositions of marine fish and mammal remains

The Paratethys evolved as a marginal sea during the Alpine-Himalayan orogeny in the Oligo-Miocene. Sediments from the northern Alpine Molasse Basin, the Vienna, and the Pannonian Basins located in the western and central part of the Paratethys thus provide unique information on regional changes in climate and oceanography during a period of active Alpine uplift Oxygen isotope compositions of well-preserved phosphatic fossils recovered from the sediments support deposition under sub-tropical to warm-temperate climate with water temperatures of 14 to 28 degrees C for the Miocene. delta(18)O values of fossil shark teeth are similar to those reported for other Miocene marine sections and, using the best available estimates of their biostratigraphic age, show a variation until the end of the Badenian similar to that reported for composite global record. The (87)Sr/(86)Sr isotope ratios of the fossils follow the global Miocene seawater trend, albeit with a much larger scatter. The deviations of (87)Sr/(86)Sr in the samples from the well-constrained seawater curve are interpreted as due to local input of terrestrially-derived Sr. Contribution of local sources is also reflected in the epsilon(Nd) values, consistent with input from ancient crystalline rocks (e.g., Bohemian Massif and/or Mesozoic sediments with epsilon(Nd) < -9. On the other hand, there is evidence for input from areas with Neogene volcanism as suggested by samples with elevated epsilon(Nd) values >-7. Excluding samples showing local influence on the water column, an average epsilon(Nd) value of -7.9 +/- 0.5 may be inferred for the Miocene Paratethys. This value is indistinguishable from the epsilon(Nd) value of the contemporaneous Indian Ocean, supporting a dominant role of this ocean in the Western and Central Paratethys. (C) 2008 Elsevier B.V. All rights reserved.

Tectonomagmatic evolution of Western Amazonia: Geochemical characterization and zircon U-Pb geochronologic constraints from the Peruvian Eastern Cordilleran granitoids

The results of a coupled, in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb study on zircon and geochemical characterization of the Eastern Cordilleran intrusives of Peru reveal 1.15 Ga of intermittent magmatism along central Western Amazonia, the Earth's oldest active open continental margin. The eastern Peruvian batholiths are volumetrically dominated by plutonism related to the assembly and breakup of Pangea during the Paleozoic-Mesozoic transition. A Carboniferous-Permian (340-285 Ma) continental arc is identified along the regional orogenic strike from the Ecuadorian border (6 degrees S) to the inferred inboard extension of the Arequipa-Antofalla terrane in southern Peru (14 degrees S). Widespread crustal extension and thinning, which affected western Gondwana throughout the Permian and Triassic resulted in the intrusion of the late- to post-tectonic La Merced-San Ramon-type anatectites dated between 275 and 220 Ma, while the emplacement of the southern Cordillera de Carabaya peraluminous granitoids in the Late Triassic to Early Jurassic (220-190 Ma) represents, temporally and regionally, a separate tectonomagmatic event likely related to resuturing of the Arequipa-Antofalla block. Volcano-plutonic complexes and stocks associated with the onset of the present Andean cycle define a compositionally bimodal alkaline suite and cluster between 180 and 170 Ma. A volumetrically minor intrusive pulse of Oligocene age (ca. 30 Ma) is detected near the southwestern Cordilleran border with the Altiplano. Both post-Gondwanide (30-170 Ma), and Precambrian plutonism (691-1123 Ma) are restricted to isolated occurrences spatially comprising less than 15% of the Eastern Cordillera intrusives. Only one remnant of a Late Ordovician intrusive belt is recognized in the Cuzco batholith (446.5 +/- 9.7 Ma) indicating that the Famatinian arc system previously identified in Peru along the north-central Eastern Cordillera and the coastal Arequipa-Antofalla terrane also existed inboard of this parautochthonous crustal fragment. Hitherto unknown occurrences of late Mesoproterozoic and middle Neoproterozoic granitoids from the south-central cordilleran segment define magmatic events at 691 +/- 13 Ma, 751 +/- 8 Ma, 985 +/- 14 Ma, and 1071-1123 +/- 23 Ma that are broadly coeval with the Braziliano and Grenville-Sunsas orogenies, respectively. Our data suggest the existence of a continuous orogenic belt in excess of 3500 km along Western Amazonia during the formation of Rodinia, its ``early'' fragmentation prior to 690 Ma, and support a model of reaccretion of the Paracas-Arequipa-Antofalla terrane to western Gondwana in the Early Ordovician with subsequent detachment of the Paracas segment in form of the Mexican Oaxaquia microcontinent in Middle Ordovician. A tectonomagmatic model involving slab detachment, followed by underplating of cratonic margin by asthenospheric mantle is proposed for the genesis of the volumetrically dominant Late Paleozoic to early Mesozoic Peruvian Cordilleran batholiths.

Stable isotope (C, O, S) systematics of the mercury mineralization at Idrija, Slovenia: constraints on fluid source and alteration processes

The world-class Idrija mercury deposit (western Slovenia) is hosted by highly deformed Permocarboniferous to Middle Triassic sedimentary rocks within a complex tectonic structure at the transition between the External Dinarides and the Southern Alps. Concordant and discordant mineralization formed concomitant with Middle Triassic bimodal volcanism in an aborted rift. A multiple isotopic (C, O, S) investigation of host rocks and ore minerals was performed to put constraints on the source and composition of the fluid, and the hydrothermal alteration. The distributions of the delta(13)C and delta(18)O values of host and gangue carbonates are indicative of a fracture-controlled hydrothermal system, with locally high fluid-rock ratios. Quantitative modeling of the delta(13)C and delta(18)O covariation for host carbonates during temperature dependent fluid-rock interaction, and concomitant precipitation of void-filling dolomites points to a slightly acidic hydrothermal fluid (delta(13)Capproximate to-4parts per thousand and delta(18)Oapproximate to+10parts per thousand), which most likely evolved during isotopic exchange with carbonates under low fluid/rock ratios. The delta(34)S values of hydrothermal and sedimentary sulfur minerals were used to re-evaluate the previously proposed magmatic and evaporitic sulfur sources for the mineralization, and to assess the importance of other possible sulfur sources such as the contemporaneous seawater sulfate, sedimentary pyrite, and organic sulfur compounds. The delta(34)S values of the sulfides show a large variation at deposit down to hand-specimen scale. They range for cinnabar and pyrite from -19.1 to +22.8parts per thousand, and from -22.4 to +59.6parts per thousand, respectively, suggesting mixing of sulfur from different sources. The peak of delta(34)S values of cinnabar and pyrite close to 0parts per thousand is compatible with ore sulfur derived dominantly from a magmatic fluid and/or from hydrothermal leaching of basement rocks. The similar stratigraphic trends of the delta(34)S values of both cinnabar and pyrite suggest a minor contribution of sedimentary sulfur (pyrite and organic sulfur) to the ore formation. Some of the positive delta(34)S values are probably derived from thermochemical reduction of evaporitic and contemporaneous seawater sulfates.

Developmental constraints on vertebrate genome evolution.

Constraints in embryonic development are thought to bias the direction of evolution by making some changes less likely, and others more likely, depending on their consequences on ontogeny. Here, we characterize the constraints acting on genome evolution in vertebrates. We used gene expression data from two vertebrates: zebrafish, using a microarray experiment spanning 14 stages of development, and mouse, using EST counts for 26 stages of development. We show that, in both species, genes expressed early in development (1) have a more dramatic effect of knock-out or mutation and (2) are more likely to revert to single copy after whole genome duplication, relative to genes expressed late. This supports high constraints on early stages of vertebrate development, making them less open to innovations (gene gain or gene loss). Results are robust to different sources of data -- gene expression from microarrays, ESTs, or in situ hybridizations; and mutants from directed KO, transgenic insertions, point mutations, or morpholinos. We determine the pattern of these constraints, which differs from the model used to describe vertebrate morphological conservation ("hourglass" model). While morphological constraints reach a maximum at mid-development (the "phylotypic" stage), genomic constraints appear to decrease in a monotonous manner over developmental time.

Prepupal Building Behavior in Drosophila melanogaster and Its Evolution under Resource and Time Constraints.

Structures built by animals are a widespread and ecologically important 'extended phenotype'. While its taxonomic diversity has been well described, factors affecting short-term evolution of building behavior within a species have received little experimental attention. Here we describe how, given the opportunity, wandering Drosophila melanogaster larvae often build long tunnels in agar substrates and embed their pupae within them. These embedded larvae are characterized by a longer egg-to-pupariation developmental time than larvae that pupate on the surface. Assuming that such building behaviors are likely to be energetically costly and/or time consuming, we hypothesized that they should evolve to be less pronounced under resource or time limitation. In accord with this prediction, larvae from populations evolved for 160 generations under a regime that combines larval malnutrition with limited developmental time dug shorter tunnels than larvae from control unselected populations. However, the proportion of larvae that embedded before pupation did not differ between the malnutrition-adapted and control populations, suggesting that tunnel length and likelihood of embedding before pupation are controlled by different genetic loci. The behaviors exhibited by wandering larvae of Drosophila melanogaster prior to pupation offer a model system to study evolution of animal building behaviors because the tunneling and embedding phenotypes are simple, facultative and highly variable.

Positive time-frequency distributions based on joint marginal constraints

This correspondence studies the formulation of members ofthe Cohen-Posch class of positive time-frequency energy distributions.Minimization of cross-entropy measures with respect to different priorsand the case of no prior or maximum entropy were considered. It isconcluded that, in general, the information provided by the classicalmarginal constraints is very limited, and thus, the final distributionheavily depends on the prior distribution. To overcome this limitation,joint time and frequency marginals are derived based on a "directioninvariance" criterion on the time-frequency plane that are directly relatedto the fractional Fourier transform.

The Besançon Galaxy Model renewed. I. Constraints on the Galactic thin disc evolution from Tycho data

Context. The understanding of Galaxy evolution can be facilitated by the use of population synthesis models, which allow to test hypotheses on the star formation history, star evolution, as well as chemical and dynamical evolution of the Galaxy. Aims. The new version of the Besanc¸on Galaxy Model (hereafter BGM) aims to provide a more flexible and powerful tool to investigate the Initial Mass Function (IMF) and Star Formation Rate (SFR) of the Galactic disc. Methods. We present a new strategy for the generation of thin disc stars which assumes the IMF, SFR and evolutionary tracks as free parameters. We have updated most of the ingredients for the star count production and, for the first time, binary stars are generated in a consistent way. We keep in this new scheme the local dynamical self-consistency as in Bienayme et al (1987). We then compare simulations from the new model with Tycho-2 data and the local luminosity function, as a first test to verify and constrain the new ingredients. The effects of changing thirteen different ingredients of the model are systematically studied. Results. For the first time, a full sky comparison is performed between BGM and data. This strategy allows to constrain the IMF slope at high masses which is found to be close to 3.0, excluding a shallower slope such as Salpeter"s one. The SFR is found decreasing whatever IMF is assumed. The model is compatible with a local dark matter density of 0.011 M pc−3 implying that there is no compelling evidence for significant amount of dark matter in the disc. While the model is fitted to Tycho2 data, a magnitude limited sample with V<11, we check that it is still consistent with fainter stars. Conclusions. The new model constitutes a new basis for further comparisons with large scale surveys and is being prepared to become a powerful tool for the analysis of the Gaia mission data.

Ore genesis of Pb-Zn deposits in the Nappe zone of Northern Tunisia: Constraints from Pb-S-C-O isotopic systems

The Jalta and Jebel Ghozlane ore deposits are located in the extreme North of Tunisia, within the Nappe zone. The mineralization of Jalta, hosted in Triassic dolostones and the overlying Mio-Pliocene conglomerates, consists of abundant galena, barite, and cerussite with accessory sphalerite, pyrite, and jordanite. At Jebel Ghozlane, large Pb-Zn concentrations occur in the Triassic dolostones and Eocene limestones. The mineral association consists of galena, sphalerite, barite, and celestite and their oxidation products (cerussite, smithsonite, and anglesite). Lead isotope ratios in galena from both districts are relatively homogeneous ((206)Pb/(204)Pb = 18.702-18.823, (207)Pb/(204)Pb = 15.665-15.677, (208)Pb/(204)Pb = 38.725-38.875). The delta(34)S values for sulfates from both areas (+12.2 to +16.2 parts per thousand at Jalta and + 14.3 to + 19.4 parts per thousand at Jebel Ghozlane) are compatible with a derivation of sulfur from marine sulfates, possibly sourced from the Triassic evaporites. The delta(34)S values of the sulfides have a range between -10 and +12.5 parts per thousand at Jalta, and between -9.1 and +22.1 parts per thousand at Jebel Ghozlane. The large range of values suggests reduction of the sulfate by bacterial and/or thermochemical reduction of sulfate to sulfur. The high delta(34)S values of sulfides require closed-system reduction processes. The isotopically light carbon in late calcites (-6.3 to -2.5 parts per thousand) and authigenic dolomite (-17.6 parts per thousand) suggests an organic source of at least some of the carbon in these samples, whereas the similarity of the delta(18)O values between calcite (+24.8 parts per thousand) and the authigenic dolomite (+24.7 parts per thousand) of Jalta and their respective host rocks reflects oxygen isotope buffering of the mineralizing fluids by the host rock carbonates. The secondary calcite isotope compositions of Jalta are compatible with a hydrothermal fluid circulation at approximately 100 to 200 degrees C, but temperatures as low as 50 degrees C may be indicated by the late calcite of Jebel Ghozlane (delta(18)O of +35.9 parts per thousand). Given the geological events related to the Alpine orogeny in the Nappe zone (nappe emplacement, bimodal volcanism, and reactivation of major faults, such as Ghardimaou-Cap Serrat) and the Neogene age of the host rocks in several localities, a Late-Miocene age is proposed for the Pb-Zn ore deposits considered in this study. Remobilization of deep-seated primary deposits in the Paleozoic sequence is the most probable source for metals in both localities considered in this study and probably in the Nappe zone as a whole. (C) 2011 Elsevier B.V. All rights reserved.

Geology, correlations, and geodynamic evolution of the Biga Peninsula (NW Turkey)

L?objectif de ce travail de recherche était de décrypter l?évolution géodynamique de la Péninsule de Biga (Turquie du N-O), à travers l?analyse de deux régions géologiques peu connues, le mélange de Çetmi et la zone d?Ezine (i.e. le Groupe d?Ezine et l?ophiolite de Denizgören). Une étude complète et détaillée de terrain (cartographie et échantillonnage) ainsi qu?une approche multidisciplinaire (sédimentologie de faciès, pétrographie sédimentaire et magmatique, micropaléontologie, datations absolues, géochimie sur roche totale, cristallinité de l?illite) ont permis d?obtenir de nouveaux éléments d?information sur la région considérée. ? Le mélange de Çetmi, de type mélange d?accrétion, affleure au nord et au sud de la Péninsule de Biga ; les principaux résultats de son étude peuvent se résumer comme suit: - Son aspect structural actuel (nature des contacts, organisation tectonique) est principalement dû au régime extensif Tertiaire présent dans la région. - Il est constitué de blocs de différentes natures : rares calcaires Scythien-Ladinien dans le faciès Han Bulog, blocs hectométriques de calcaires d?âge Norien-Rhaetien de rampe carbonatée, nombreux blocs décamétriques de radiolarites rouges d?âge Bajocien- Aptien, blocs/écailles de roches magmatiques de type spilites (basaltes à andésite), ayant des signatures géochimiques d?arcs ou intra-plaques. - La matrice du mélange est constituée d?une association greywacke-argilites dont l?âge Albien inférieur à moyen a été déterminé par palynologie. - L?activité du mélange s?est terminée avant le Cénomanien (discordance Cénomanienne au sommet du mélange, pas de bloc plus jeune que la matrice). - Du point de vue de ses corrélations latérales, le mélange de Çetmi partage plus de traits communs avec les mélanges se trouvant dans les nappes allochtones du Rhodope (nord de la Grèce et sud-ouest de la Bulgarie) qu?avec ceux de la suture Izmir-Ankara (Turquie); il apparaît finalement que sa mise en place s?est faite dans une logique balkanique (chevauchements vers le nord d?âge anté-Cénomanien). ? Le Groupe d?Ezine et l?ophiolite sus-jacente de Denizgören affleurent dans la partie ouest de la Péninsule de Biga. Le Groupe d?Ezine est une épaisse séquence sédimentaire continue (3000 m), subdivisée en trois formations, caractérisée chacune par un type de sédimentation spécifique, relatif à un environnement de dépôt particulier. De par ses caractéristiques (grande épaisseur, variations latérales de faciès et d?épaisseur dans les formations, érosion de matériel provenant de l?amont du bassin), le groupe d?Ezine est interprétée comme un dépôt syn-rift d?âge Permien moyen-Trias inférieur. Il pourrait représenter une partie de la future marge passive sud Rhodopienne à la suite de l?ouverture de l?océan Maliac/Méliata. L?ophiolite de Denizgören sus-jacente repose sur le Groupe d?Ezine par l?intermédiaire d?une semelle métamorphique à gradient inverse, du faciès amphibolite à schiste vert. L?âge du faciès amphibolite suggère une initiation de l?obduction au Barrémien (125 Ma, âge Ar/Ar); cet âge est unique dans le domaine égéen, mais il peut là aussi être relié à une logique balkanique, sur la base de comparaison avec le domaine Rhodopien. ? Toutes les unités précédentes (mélange de Çetmi, Groupe d?Ezine et ophiolite de Denizgören) ont passivement subi trois phases extensives pendant le Tertiaire. Dans la région d?Ezine et du mélange nord, les micaschistes HP sous-jacents ont été exhumés avant l?Eocène moyen. Dans le cas du mélange sud, cette exhumation Eocene est en partie enregistrée dans les mylonites séparant le mélange du dôme métamorphique sous-jacent du Kazda?. Le mélange sud est dans tous les cas fortement érodé à la suite de la double surrection du dôme du Kazda?, près de la lim ite Oligocène/Miocene et pendant le Plio- Quaternaire. Dans le premier cas, ce soulèvement est caractérisé par le développement d?une faille de détachement à faible pendage, qui contrôle à la fois l?exhumation du massif, et la formation d?un bassin sédimentaire syntectonique, de type bassin supradétachement; quant à la phase extensive la plus récente, elle est contrôlée par le jeu de failles normales à forts pendages qui remanient l?ensemble des structures héritées, et dictent la géomorphologie actuelle de la région. ? Il est possible de proposer un scénario pour l?évolution géodynamique de la Péninsule de Biga, basé sur l?ensemble des résultats précédents et sur les données de la géologie régionale ; ses points principaux sont: - La Péninsule de Biga fait partie de la marge Rhodopienne. - Le Groupe d?Ezine est un témoin de la marge passive nord Maliac/Méliata. - L?ophiolite de Denizgören et le mélange de Çetmi ont été mis en place tous deux vers le nord sur la marge précédente, respectivement au Barrémien et à l?Albien terminal- Cénomanien inférieur. - Une forte composante décrochante durant l?emplacement est suggérée par la préservation de fragments de la marge passive et l?absence de métamorphisme dans la plaque inférieure. - Tous les évènements précédents ont été largement affectés par le régime d?extension Tertiaire.<br/><br/>The purpose of this study is to unravel the geodynamic evolution of the Biga Peninsula (NW Turkey) through the detailed study of two poorly known areas, the Çetmi mélange and the Ezine zone (i.e. the Ezine Group and the Denizgören ophiolite). The methodology was based on a detailed field work and a multidisciplinary approach. ? The accretion-related Çetmi mélange is mainly cropping out north and south of the Biga Peninsula; the main results of its study can be summarized as follows: -Its present-day structural aspect (type of contacts, tectonic organisation) is largely inherited from the Tertiary extensional regime in the region. -It is made of blocks of various natures: Han Bulog limestones with a Scythian to Ladinian age, common carbonate ramp Norian-Rhaetian limestones (biggest blocks of the mélange), red radolarite with a Bajocian to Aptian age; the most common lithology of the mélange is made by block/slices of spilitic magmatic rocks (basalt to andesite); they have volcanic arc or within plate basalt geochemical signatures. -The matrix of the mélange is made of a greywacke-shale association of Early-Middle Albian age. - The mélange stopped its activity before the Cenomanian (no younger blocks than the matrix, and Cenomanian unconformity). - If compared to the regional geology, the Çetmi mélange shares some characteristics with the Izmir-Ankara mélanges (less), and with the mélanges from allochthonous nappes found in eastern Rhodope (more); it appears finally that its emplacement is related to a Balkanic logic (ante-Cenomanian northward thrusting). ? The Ezine Group and the overlying Denizgören ophiolite are cropping out in the western part of the Biga Peninsula. The Ezine Group is a thick sedimentary sequence interpreted as a syn-rift deposit of Middle Permian-Early Triassic age. It represents a part of the south Rhodopian passive margin, following the opening of the Maliac/Meliata oceanic domain. The Denizgören ophiolite has been emplaced northward on the Ezine Group in the Barremian (125 Ma, age of the amphibolitic sole); this age is unique in the Aegean domain, but here again, it may be related to a Balkan logic. ? All the previous units (Çetmi mélange, Ezine Group and Denizgören ophiolite) have passively suffered two extensional regimes during the Tertiary. In the Ezine and northern Çetmi mélange area, the underlying HP Çamlýca micaschists were exhumed before the Middle Eocene. As for the southern mélange, it was strongly eroded following the Late Oligocene to Quaternary uplift of the underlying Kazda? Massif. This uplift was characterized by the development of a low-angle detachment fault controlling a part of the exhumation, as well as the development of a supra-detachment basin. ? Based on the previous results, and on the data from the regional geology, one can propose a scenario for the geodynamic evolution of the Biga Peninsula. Its key points are:- The Biga Peninsula is belonging to the Rhodope margin. - The Ezine Group is a remnant of the northern Maliac/Meliata passive margin. - Both the Denizgören ophiolite and the Çetmi mélange have been emplaced northward on the previous margin, respectively in the Barremian and in the Late Albian-Early Cenomanian times. - The preservation of the remnants of the Rhodope margin, as well as the absence of metamorphism in the lower plate suggest a strong strike-slip component during the emplacements. - All the previous events are (at least) partly obliterated by the Tertiary extensional regime.<br/><br/>Le géologue est comme un «historien» de la Terre, qui porte un intérêt particulier à l?étude du passé de notre planète; ce dernier, très ancien, se mesure en dizaines ou centaines de millions d?années (Ma). Or le visage de la terre a constamment évolué au cours des ces millions d?années écoulés, car les plaques (continentales et océaniques) qui composent son enveloppe superficielle ne restent pas immobiles, mais se déplacent continuellement à sa surface, à une vitesse de l?ordre du cm/an (théorie de la tectonique des plaques); c?est ainsi, par exemple, que des océans naissent, grandissent, puis finissent par se refermer. On appelle sutures océaniques, les zones, aujourd?hui sur la terre ferme, où l?on retrouve les restes d?océans disparus. Ces sutures sont caractérisées par deux associations distinctes de roches, que l?on appelle les mélanges et les ophiolites; ces mélanges et ophiolites sont donc les témoins de l?activité passée d?un océan aujourd?hui refermé. L?équipe de recherche dans laquelle ce travail à été réalisé s?intéresse à un vaste domaine océanique fossile: l?océan Néotéthys. Cet océan, de plusieurs milliers de kilomètres de large, séparait alors l?Europe et l?Asie au nord, de l?Afrique, l?Inde et l?Australie au sud. De cet océan, il n?en subsiste aujourd?hui qu?une infime partie, qui se confond avec notre mer Méditerranée actuelle. Or, tout comme l?océan Pacifique est bordé de mers plus étroites (Mer de Chine, du Japon, etc?), l?océan Néotéthys était bordé au nord de mers marginales. C?est dans ce cadre que s?est inscrit mon travail de thèse, puisqu?il a consisté en l?étude d?une suture océanique (mélange plus ophiolite), témoin d?une des mers qui bordait l?océan Néotéthys sur sa marge nord. L?objectif était de préciser de quelle suture il s?agissait, puis de déterminer quand et comment elle avait fonctionné (i.e son évolution géologique). Les roches qui composent cette suture affleurent aujourd?hui en Turquie nord occidentale dans la Péninsule de Biga. Au nord et au sud de la péninsule se trouvent les zones géologique du mélange de Çetmi, et à l?ouest, le Groupe d?Ezine et l?ophiolite susjacente, dite ophiolite de Denizgören. Une étude complète et détaillée de terrain (cartographie, échantillonnage), suivie de diverses analyses en laboratoire (détermination de leur âge, de leur condition de formation, etc?), ont permis d?aboutir aux principaux résultats suivants : - Mise en évidence dans le mélange de Çetmi des témoins (1) de l?océan Lycien disparu (ancienne mer marginale de la Néotéthys), et (2) de la marge continentale qui le bordait au nord. - Fin de l?activité du mélange de Çetmi il y a environ 105 Ma (Albien). - Le mélange de Çetmi est difficilement corrélable dans le temps avec les unités semblables affleurant dans la région d?étude (unicité du mélange), ce qui implique des conditions particulière de formation. - L?ophiolite de Denizgören est un morceau d?océan Lycien posé sur un reste préservé de sa marge continentale nord. - Cette dernière est représentée sur le terrain par une succession de roches caractéristiques, le Groupe d?Ezine. Celui-ci est lui-même un témoin de l?ouverture d?un océan marginal de la Néotethys antérieur au Lycien, l?océan Maliac, qui s?est ouvert il y a 245 Ma (Permien-Trias). - La mise en place de l?ophiolite de Denizgören sur le Groupe d?Ezine (125 Ma, Barrémien) est antérieure à la mise en place du mélange de Çetmi. - Il apparaît que ces deux mises en place sont contemporaines de la formation de la chaîne des Balkans, terminée avant le Cénomanien (100 Ma). - L?évolution dans le temps des objets précédents (océans, marges continentales) montre de grands mouvements latéraux est-ouest entre ces objets (translation). Ce qui implique que les roches que l?on retrouve aujourd?hui sur un transect nord-sud ne l?étaient pas nécessairement auparavant. - Enfin, il s?avère que le mélange de Çetmi, l?ophiolite de Denizgören, et le Groupe d?Ezine ont subi par la suite des déformations extensives importantes qui ont considérablement perturbé le schéma post-mise en place.

GIS and geodatabases application to global scale plate tectonics modelling

Les reconstructions palinspastiques fournissent le cadre idéal à de nombreuses études géologiques, géographiques, océanographique ou climatiques. En tant qu?historiens de la terre, les "reconstructeurs" essayent d?en déchiffrer le passé. Depuis qu?ils savent que les continents bougent, les géologues essayent de retracer leur évolution à travers les âges. Si l?idée originale de Wegener était révolutionnaire au début du siècle passé, nous savons depuis le début des années « soixante » que les continents ne "dérivent" pas sans but au milieu des océans mais sont inclus dans un sur-ensemble associant croûte « continentale » et « océanique »: les plaques tectoniques. Malheureusement, pour des raisons historiques aussi bien que techniques, cette idée ne reçoit toujours pas l'écho suffisant parmi la communauté des reconstructeurs. Néanmoins, nous sommes intimement convaincus qu?en appliquant certaines méthodes et certains principes il est possible d?échapper à l?approche "Wégenerienne" traditionnelle pour enfin tendre vers la tectonique des plaques. Le but principal du présent travail est d?exposer, avec tous les détails nécessaires, nos outils et méthodes. Partant des données paléomagnétiques et paléogéographiques classiquement utilisées pour les reconstructions, nous avons développé une nouvelle méthodologie replaçant les plaques tectoniques et leur cinématique au coeur du problème. En utilisant des assemblages continentaux (aussi appelés "assemblées clés") comme des points d?ancrage répartis sur toute la durée de notre étude (allant de l?Eocène jusqu?au Cambrien), nous développons des scénarios géodynamiques permettant de passer de l?une à l?autre en allant du passé vers le présent. Entre deux étapes, les plaques lithosphériques sont peu à peu reconstruites en additionnant/ supprimant les matériels océaniques (symbolisés par des isochrones synthétiques) aux continents. Excepté lors des collisions, les plaques sont bougées comme des entités propres et rigides. A travers les âges, les seuls éléments évoluant sont les limites de plaques. Elles sont préservées aux cours du temps et suivent une évolution géodynamique consistante tout en formant toujours un réseau interconnecté à travers l?espace. Cette approche appelée "limites de plaques dynamiques" intègre de multiples facteurs parmi lesquels la flottabilité des plaques, les taux d'accrétions aux rides, les courbes de subsidence, les données stratigraphiques et paléobiogéographiques aussi bien que les évènements tectoniques et magmatiques majeurs. Cette méthode offre ainsi un bon contrôle sur la cinématique des plaques et fournit de sévères contraintes au modèle. Cette approche "multi-source" nécessite une organisation et une gestion des données efficaces. Avant le début de cette étude, les masses de données nécessaires était devenues un obstacle difficilement surmontable. Les SIG (Systèmes d?Information Géographiques) et les géo-databases sont des outils informatiques spécialement dédiés à la gestion, au stockage et à l?analyse des données spatialement référencées et de leurs attributs. Grâce au développement dans ArcGIS de la base de données PaleoDyn nous avons pu convertir cette masse de données discontinues en informations géodynamiques précieuses et facilement accessibles pour la création des reconstructions. Dans le même temps, grâce à des outils spécialement développés, nous avons, tout à la fois, facilité le travail de reconstruction (tâches automatisées) et amélioré le modèle en développant fortement le contrôle cinématique par la création de modèles de vitesses des plaques. Sur la base des 340 terranes nouvellement définis, nous avons ainsi développé un set de 35 reconstructions auxquelles est toujours associé un modèle de vitesse. Grâce à cet ensemble de données unique, nous pouvons maintenant aborder des problématiques majeurs de la géologie moderne telles que l?étude des variations du niveau marin et des changements climatiques. Nous avons commencé par aborder un autre problème majeur (et non définitivement élucidé!) de la tectonique moderne: les mécanismes contrôlant les mouvements des plaques. Nous avons pu observer que, tout au long de l?histoire de la terre, les pôles de rotation des plaques (décrivant les mouvements des plaques à la surface de la terre) tendent à se répartir le long d'une bande allant du Pacifique Nord au Nord de l'Amérique du Sud, l'Atlantique Central, l'Afrique du Nord, l'Asie Centrale jusqu'au Japon. Fondamentalement, cette répartition signifie que les plaques ont tendance à fuir ce plan médian. En l'absence d'un biais méthodologique que nous n'aurions pas identifié, nous avons interprété ce phénomène comme reflétant l'influence séculaire de la Lune sur le mouvement des plaques. La Lune sur le mouvement des plaques. Le domaine océanique est la clé de voute de notre modèle. Nous avons attaché un intérêt tout particulier à le reconstruire avec beaucoup de détails. Dans ce modèle, la croûte océanique est préservée d?une reconstruction à l?autre. Le matériel crustal y est symbolisé sous la forme d?isochrones synthétiques dont nous connaissons les âges. Nous avons également reconstruit les marges (actives ou passives), les rides médio-océaniques et les subductions intra-océaniques. En utilisant ce set de données très détaillé, nous avons pu développer des modèles bathymétriques 3-D unique offrant une précision bien supérieure aux précédents.<br/><br/>Palinspastic reconstructions offer an ideal framework for geological, geographical, oceanographic and climatology studies. As historians of the Earth, "reconstructers" try to decipher the past. Since they know that continents are moving, geologists a trying to retrieve the continents distributions through ages. If Wegener?s view of continent motions was revolutionary at the beginning of the 20th century, we know, since the Early 1960?s that continents are not drifting without goal in the oceanic realm but are included in a larger set including, all at once, the oceanic and the continental crust: the tectonic plates. Unfortunately, mainly due to technical and historical issues, this idea seems not to receive a sufficient echo among our particularly concerned community. However, we are intimately convinced that, by applying specific methods and principles we can escape the traditional "Wegenerian" point of view to, at last, reach real plate tectonics. This is the main aim of this study to defend this point of view by exposing, with all necessary details, our methods and tools. Starting with the paleomagnetic and paleogeographic data classically used in reconstruction studies, we developed a modern methodology placing the plates and their kinematics at the centre of the issue. Using assemblies of continents (referred as "key assemblies") as anchors distributed all along the scope of our study (ranging from Eocene time to Cambrian time) we develop geodynamic scenarios leading from one to the next, from the past to the present. In between, lithospheric plates are progressively reconstructed by adding/removing oceanic material (symbolized by synthetic isochrones) to major continents. Except during collisions, plates are moved as single rigid entities. The only evolving elements are the plate boundaries which are preserved and follow a consistent geodynamical evolution through time and form an interconnected network through space. This "dynamic plate boundaries" approach integrates plate buoyancy factors, oceans spreading rates, subsidence patterns, stratigraphic and paleobiogeographic data, as well as major tectonic and magmatic events. It offers a good control on plate kinematics and provides severe constraints for the model. This multi-sources approach requires an efficient data management. Prior to this study, the critical mass of necessary data became a sorely surmountable obstacle. GIS and geodatabases are modern informatics tools of specifically devoted to store, analyze and manage data and associated attributes spatially referenced on the Earth. By developing the PaleoDyn database in ArcGIS software we converted the mass of scattered data offered by the geological records into valuable geodynamical information easily accessible for reconstructions creation. In the same time, by programming specific tools we, all at once, facilitated the reconstruction work (tasks automation) and enhanced the model (by highly increasing the kinematic control of plate motions thanks to plate velocity models). Based on the 340 terranes properly defined, we developed a revised set of 35 reconstructions associated to their own velocity models. Using this unique dataset we are now able to tackle major issues of the geology (such as the global sea-level variations and climate changes). We started by studying one of the major unsolved issues of the modern plate tectonics: the driving mechanism of plate motions. We observed that, all along the Earth?s history, plates rotation poles (describing plate motions across the Earth?s surface) tend to follow a slight linear distribution along a band going from the Northern Pacific through Northern South-America, Central Atlantic, Northern Africa, Central Asia up to Japan. Basically, it sighifies that plates tend to escape this median plan. In the absence of a non-identified methodological bias, we interpreted it as the potential secular influence ot the Moon on plate motions. The oceanic realms are the cornerstone of our model and we attached a particular interest to reconstruct them with many details. In this model, the oceanic crust is preserved from one reconstruction to the next. The crustal material is symbolised by the synthetic isochrons from which we know the ages. We also reconstruct the margins (active or passive), ridges and intra-oceanic subductions. Using this detailed oceanic dataset, we developed unique 3-D bathymetric models offering a better precision than all the previously existing ones.

Use of physiological constraints to identify quantitative design principles for gene expression in yeast adaptation to heat shock

Background: Understanding the relationship between gene expression changes, enzyme activity shifts, and the corresponding physiological adaptive response of organisms to environmental cues is crucial in explaining how cells cope with stress. For example, adaptation of yeast to heat shock involves a characteristic profile of changes to the expression levels of genes coding for enzymes of the glycolytic pathway and some of its branches. The experimental determination of changes in gene expression profiles provides a descriptive picture of the adaptive response to stress. However, it does not explain why a particular profile is selected for any given response. Results: We used mathematical models and analysis of in silico gene expression profiles (GEPs) to understand how changes in gene expression correlate to an efficient response of yeast cells to heat shock. An exhaustive set of GEPs, matched with the corresponding set of enzyme activities, was simulated and analyzed. The effectiveness of each profile in the response to heat shock was evaluated according to relevant physiological and functional criteria. The small subset of GEPs that lead to effective physiological responses after heat shock was identified as the result of the tuning of several evolutionary criteria. The experimentally observed transcriptional changes in response to heat shock belong to this set and can be explained by quantitative design principles at the physiological level that ultimately constrain changes in gene expression. Conclusion: Our theoretical approach suggests a method for understanding the combined effect of changes in the expression of multiple genes on the activity of metabolic pathways, and consequently on the adaptation of cellular metabolism to heat shock. This method identifies quantitative design principles that facilitate understating the response of the cell to stress.