Selección de información para la toma de decisiones en el sector transporte = The choice of information for decision making in the transport sector

Incluye Bibliografía

Economic considerations governing the choice of voltage for power supply systems

Includes bibliography

The employment situation in Latin America and the Caribbean: Recovery of employment: towards a sustainable model

The adverse effects on Latin America and the Caribbean of the global economic and financial crisis, the worst since the 1930s, have been considerably less than was once feared. Although a run of growth was cut short in 2009 and regional output shrank by 1.9%, the impact of the crisis was limited by the application of countercyclical fiscal and monetary policies by many of the region’s governments. The recovery in the economies, particularly in South America, has gone hand-in-hand with the rapid resurgence of the emerging economies of Asia, with all the favourable consequences this has had for global trade. A similar pattern may be observed regarding the impact of the crisis on labour markets in Latin America and the Caribbean. Although millions of people lost their jobs or had to trade down to lower-quality work, levels of employment (including formal employment) fell by less than originally foreseen. At the same time, real wages rose slightly in a context of falling inflation. The labour market thus stabilized domestic demand, and this contributed to the recovery that began in many countries in late 2009. Improved international trade and financing conditions, and the pick-up in domestic demand driven by macroeconomic policies, have led different commentators to estimate growth in the region’s economy at some 6% in 2010. As detailed in the first part of this edition of the Bulletin, the upturn has been manifested at the regional level by the creation of formal employment, a rise in the employment rate, a decline in joblessness and a moderate increase in real wages. Specifically, it is estimatedthat the regional unemployment rate will have dropped by 0.6 percentage points, from 8.1% in 2009 to 7.5% in 2010. The performance of different countries and subregions has been very uneven, however. On the one hand, there is Brazil, where high economic growth has been accompanied by vigorous creation of formal jobs and the unemployment rate has dropped to levels not seen in a long time. Other countries in South America have benefited from strong demand for natural resources from the Asian countries. Combined with higher domestic demand, this has raised their economic growth rates and had a positive impact on employment indicators. On the other hand, the recovery is still very weak in certain countries and subregions, particularly in the Caribbean, with employment indicators continuing to worsen.Thus, the recovery in the region’s economy in 2010 may be characterized as dynamic but uneven. Growth estimates for 2011 are less favourable. The risks associated with the imbalances in the world economy and the withdrawal of countercyclical fiscal packages are likely to cause the region to grow more slowly in 2011. Accordingly, a small further reduction of between 0.2 and 0.4 percentage points in the unemployment rate is projected for 2011. However, these indicators of recovery do not guarantee growth with decent work in the long term. To bolster the improvement in labour market indicators and generate more productive employment and decent work, the region’s countries need to strengthen their macroeconomic policies, improve regional and global policy coordination, identify and remove bottlenecks in the labour market itself and enhance instruments designed to promote greater equality. Like the rest of the world, the Latin American and Caribbean region is also confronted with the challenge of transforming the way it produces so that its economies can develop along tracks that are sustainable in the long term. Climate change and the consequent challenge of developing and strengthening low-carbon production and consumption patterns will also affect the way people work. A great challenge ahead is to create green jobs that combine decent work with environmentally sustainable production patterns. From this perspective, the second part of this Bulletin discusses the green jobs approach, offering some information on the challenges and opportunities involved in moving towards a sustainable economy in the region and presenting a set of options for addressing environmental issues and the repercussions of climate change in the world of work. Although the debate about the green jobs concept is fairly new in the region, examples already exist and a number of countries have moved ahead with the application of policies and programmes in this area. Costa Rica has formulated a National Climate Change Strategy, for example, whose foremost achievements include professional training in natural-resource management. In Brazil, fuel production from biomass has increased and social housing with solar panelling is being built. A number of other countries in the region are making progress in areas such as ecotourism, sustainable agriculture and infrastructure for climate change adaptation, and in formalizing the work of people who recycle household waste. The shift towards a more environmentally sustainable economy may cause jobs to be destroyed in some economic sectors and created in others. The working world will inevitably undergo major changes. If the issue is approached by way of social dialogue and appropriate public policies, there is a chance to use this shift to create more decent jobs, thereby contributing to growth in the economy, the construction of higher levels of equality and protection for the environment.

Electromyographic study of the trapezius muscle in free movements of the arm

The trapezius muscle (superior, middle and inferior portions) was analyzed in 20 volunteers. The electromyographic tests were carried out using a four-channel TECA TE 2-7 electromyograph with surface- and single coaxial needle electrodes. In abduction, adduction and flexion-extension, the 3 portions show increasing and decreasing activity, respectively, from the beginning until the end of these movements. In hyperextension, the 3 portions show increasing activity from the beginning until the end of the movement, with greater participation of the middle portion. Significant differences were not observed in the electromyographic profile of the trapezius, using surface and needle electrodes.

Electromyographic study of the trapezius muscle in free movements of the shoulder

The objective of this study is to analyze the simultaneity of the actions of the three portions of the trapezius (superior portion = TS; middle portion = TM and inferior portion = TI) in elevation, lowering, retraction and protraction of the shoulders. The electromyographic tests were carried out in 20 volunteers using a 4-channel TECA TE 2-7 electromyograph and surface and single coaxial needle electrodes. The electromyographs, obtained with the two types of electrodes, show that in elevation and lowering of the shoulders, TS and TM present increasing and decreasing activity, respectively, from the beginning until the end of these movements. In retraction of the shoulders, TM and TI present increasing activity from the beginning to the end of the movement. In protraction, TS, TM and TI do not show any activity.

Effect of collagen matrix saturation on the surface free energy of dentin using different agents

The surface free energy of conditioned-dentin is one of the factors that interfere with monomeric infiltration of the interfibrillar spaces. Saturation of the tooth matrix with different substances may modulate this energy and, consequently, the wettability of the dentin. To evaluate the influence of different substances used to saturate conditioned-dentin on surface free energy (SFE) of this substrate. Dentin blocks (4 × 7 × 1 mm, n = 6/ group), obtained from the roots of bovine incisors, were etched using phosphoric acid for 15 seconds, rinsed and gently dried. The surfaces were treated for 60 seconds with: ultra-purified water (H20-control); ethanol (EtOH), acetone (ACT), chlorhexidine (CHX), ethylenediaminetetraacetic acid (EDTA); or sodium hypochlorite (NaOCl). The tooth surfaces were once again dried with absorbent paper and prepared for SFE evaluation using three standards: water, formamide and bromonaphthalene. Analysis of variance (ANOVA) and Dunnet's tests (a = 0.05) were applied to the data. Ethylenediaminetetraacetic acid was the only substance that caused a change to the contact angle for the standards water and formamide, while only EtOH influenced the angles formed between formamide and the dentin surface. None of the substances exerted a significant effect for bromonaphtha-lene. In comparison to the control, only EDTA and NaOCl altered both polar components of the SFE. Total SFE was increased by saturation of the collagen matrix by EDTA and reduced when NaOCl was used. Saturation of the collagen matrix by EDTA and EtOH changed the surface free energy of the dentin. In addition, the use of NaOCl negatively interfered with the properties evaluated. The increase of surface free energy and wettability of the dentin surface would allow higher penetration of the the adhesive system, which would be of importance to the clinical success of resin-dentin union.

Quantum entanglement of bound particles under free center of mass dispersion

On the basis of the full analytical solution of the overall unitary dynamics, the time evolution of entanglement is studied in a simple bipartite model system evolving unitarily from a pure initial state. The system consists of two particles in one spatial dimension bound by harmonic forces and having its free center of mass initially localized in space in a minimum uncertainty wavepacket. The existence of such initial states in which the bound particles are not entangled is discussed. Galilean invariance of the system ensures that the dynamics of entanglement between the two particles is independent of the wavepacket mean momentum. In fact, as shown, it is driven by the dispersive center of mass free dynamics, and evolves in a time scale that depends on the interparticle interaction in an essential way.

Gaussian deconvolution: a useful method for a form-free modeling of scattering data from mono- and multilayered planar systems

A new method for analysis of scattering data from lamellar bilayer systems is presented. The method employs a form-free description of the cross-section structure of the bilayer and the fit is performed directly to the scattering data, introducing also a structure factor when required. The cross-section structure (electron density profile in the case of X-ray scattering) is described by a set of Gaussian functions and the technique is termed Gaussian deconvolution. The coefficients of the Gaussians are optimized using a constrained least-squares routine that induces smoothness of the electron density profile. The optimization is coupled with the point-of-inflection method for determining the optimal weight of the smoothness. With the new approach, it is possible to optimize simultaneously the form factor, structure factor and several other parameters in the model. The applicability of this method is demonstrated by using it in a study of a multilamellar system composed of lecithin bilayers, where the form factor and structure factor are obtained simultaneously, and the obtained results provided new insight into this very well known system.

Structured antibody surfaces for bio-recognition and a label-free detection of bacteria

Antibody microarrays are of great research interest because of their potential application as biosensors for high-throughput protein and pathogen screening technologies. In this active area, there is still a need for novel structures and assemblies providing insight in binding interactions such as spherical and annulus-shaped protein structures, e.g. for the utilization of curved surfaces for the enhanced protein-protein interactions and detection of antigens. Therefore, the goal of the presented work was to establish a new technique for the label-free detection of bio-molecules and bacteria on topographically structured surfaces, suitable for antibody binding.rnIn the first part of the presented thesis, the fabrication of monolayers of inverse opals with 10 μm diameter and the immobilization of antibodies on their interior surface is described. For this purpose, several established methods for the linking of antibodies to glass, including Schiff bases, EDC/S-NHS chemistry and the biotin-streptavidin affinity system, were tested. The employed methods included immunofluorescence and image analysis by phase contrast microscopy. It could be shown that these methods were not successful in terms of antibody immobilization and adjacent bacteria binding. Hence, a method based on the application of an active-ester-silane was introduced. It showed promising results but also the need for further analysis. Especially the search for alternative antibodies addressing other antigens on the exterior of bacteria will be sought-after in the future.rnAs a consequence of the ability to control antibody-functionalized surfaces, a new technique employing colloidal templating to yield large scale (~cm2) 2D arrays of antibodies against E. coli K12, eGFP and human integrin αvβ3 on a versatile useful glass surface is presented. The antibodies were swept to reside around the templating microspheres during solution drying, and physisorbed on the glass. After removing the microspheres, the formation of annuli-shaped antibody structures was observed. The preserved antibody structure and functionality is shown by binding the specific antigens and secondary antibodies. The improved detection of specific bacteria from a crude solution compared to conventional “flat” antibody surfaces and the setting up of an integrin-binding platform for targeted recognition and surface interactions of eukaryotic cells is demonstrated. The structures were investigated by atomic force, confocal and fluorescence microscopy. Operational parameters like drying time, temperature, humidity and surfactants were optimized to obtain a stable antibody structure.

Field-free control of magnetism in nanostructured materials probed with high resolution X-ray microscopy

Magnetic memories are a backbone of today's digital data storage technology, where the digital information is stored as the magnetic configuration of nanostructured ferromagnetic bits. Currently, the writing of the digital information on the magnetic memory is carried out with the help of magnetic fields. This approach, while viable, is not optimal due to its intrinsically high energy consumption and relatively poor scalability. For this reason, the research for different mechanisms that can be used to manipulate the magnetic configuration of a material is of interest. In this thesis, the control of the magnetization of different nanostructured materials with field-free mechanisms is investigated. The magnetic configuration of these nanostructured materials was imaged directly with high resolution x-ray magnetic microscopy. rnFirst of all, the control of the magnetic configuration of nanostructured ferromagnetic Heusler compounds by fabricating nanostructures with different geometries was analyzed. Here, it was observed that the magnetic configuration of the nanostructured elements is given by the competition of magneto-crystalline and shape anisotropy. By fabricating elements with different geometries, we could alter the point where these two effects equilibrate, allowing for the possibility to tailor the magnetic configuration of these nanostructured elements to the required necessities.rnThen, the control of the magnetic configuration of Ni nanostructures fabricated on top of a piezoelectric material with the magneto-elastic effect (i.e. by applying a piezoelectric strain to the Ni nanostructures) was investigated. Here, the magneto-elastic coupling effect gives rise to an additional anisotropy contribution, proportional to the strain applied to the magnetic material. For this system, a reproducible and reversible control of the magnetic configuration of the nanostructured Ni elements with the application of an electric field across the piezoelectric material was achieved.rnFinally, the control of the magnetic configuration of La0.7Sr0.3MnO3 (LSMO) nanostructures with spin-polarized currents was studied. Here, the spin-transfer torque effect was employed to achieve the displacement of magnetic domain walls in the LSMO nanostructures. A high spin-transfer torque efficiency was observed for LSMO at low temperatures, and a Joule-heating induced hopping of the magnetic domain walls was observed at room temperatures, allowing for the analysis of the energetics of the domain walls in LSMO.rnThe results presented in this thesis give thus an overview on the different field-free approaches that can be used to manipulate and tailor the magnetization configuration of a nanostructured material to the various technological requirements, opening up novel interesting possibilities for these materials.

The choice of anesthesia influences oxidative energy metabolism and tissue survival in critically ischemic murine skin

In surgical animal studies anesthesia is used regularly. Several reports in the literature demonstrate respiratory and cardiovascular side effects of anesthesiologic agents. The aim of this study was to compare two frequently used anesthesia cocktails (ketamine/xylazine [KX] versus medetomidine/climazolam/fentanyl [MCF]) in skin flap mouse models. Systemic blood values, local metabolic parameters, and surgical outcome should be analyzed in critical ischemic skin flap models. Systemic hypoxia was found in the animals undergoing KX anesthesia compared with normoxia in the MCF group (sO(2): 89.2% +/- 2.4% versus 98.5% +/- 1.2%, P < 0.01). Analysis of tissue metabolism revealed impaired anaerobic oxygen metabolism and increased cellular damage in critical ischemic flap tissue under KX anesthesia (lactate/pyruvate ratio: KX 349.86 +/- 282.38 versus MCF 64.53 +/- 18.63; P < 0.01 and glycerol: KX 333.50 +/- 83.91 micromol/L versus MCF 195.83 +/- 29.49 micromol/L; P < 0.01). After 6 d, different rates of flap tissue necrosis could be detected (MCF 57% +/- 6% versus KX 68% +/- 6%, P < 0.01). In summary we want to point out that the type of anesthesia, the animal model and the goal of the study have to be well correlated. Comparing the effects of KX and MCF anesthesia in mice on surgical outcome was a novel aspect of our study.