Endoluminal surgical triangulation: overcoming challenges of colonic endoscopic submucosal dissections using a novel flexible endoscopic surgical platform: feasibility study in a porcine model.

BACKGROUND: Colonic endoscopic submucosal dissection (ESD) is challenging as a result of the limited ability of conventional endoscopic instruments to achieve traction and exposure. The aim of this study was to evaluate the feasibility of colonic ESD in a porcine model using a novel endoscopic surgical platform, the Anubiscope (Karl Storz, Tüttlingen, Germany), equipped with two working channels for surgical instruments with four degrees of freedom offering surgical triangulation. METHODS: Nine ESDs were performed by a surgeon without any ESD experience in three swine, at 25, 15, and 10 cm above the anal verge with the Anubiscope. Sixteen ESDs were performed by an experienced endoscopist in five swine using conventional endoscopic instruments. Major ESD steps included the following for both groups: scoring the area, submucosal injection of glycerol, precut, and submucosal dissection. Outcomes measured were as follows: dissection time and speed, specimen size, en bloc dissection, and complications. RESULTS: No perforations occurred in the Anubis group, while there were eight perforations (50 %) in the conventional group (p = 0.02). Complete and en bloc dissections were achieved in all cases in the Anubis group. Mean dissection time for completed cases was statistically significantly shorter in the Anubis group (32.3 ± 16.1 vs. 55.87 ± 7.66 min; p = 0.0019). Mean specimen size was higher in the conventional group (1321 ± 230 vs. 927.77 ± 229.96 mm(2); p = 0.003), but mean dissection speed was similar (35.95 ± 18.93 vs. 23.98 ± 5.02 mm(2)/min in the Anubis and conventional groups, respectively; p = 0.1). CONCLUSIONS: Colonic ESDs were feasible in pig models with the Anubiscope. This surgical endoscopic platform is promising for endoluminal surgical procedures such as ESD, as it is user-friendly, effective, and safe.

Granular Base Materials for Flexible Pavements, HR-131, 1970

The coefficients of relative strength (CORS) of base courses for use in the American association state highway officials (AASHO) interim guide for the design of flexible pavements are determined here. Based on (1) volumetric strain--axial strain relationships at minimum volume, and (2) effective stress ratio-cohesion relationships at maximum effective stress ratio, CORS were determined from the results of laboratory triaxial tests on both asphalt-treated and untreated aggregate base course materials. The researchers conclude that volumetric strain-axial strain at minimum volume appear to be appropriate parameters for determining CORS.

Alternative Flexible Overlays, HR-229, Construction Report, 1983

The object of this research project is to construct and evaluate several bituminous concrete base overlays with various high penetration bituminous products which have the potential to reduce future maintenance and construction costs. In September of 1981 nine different bituminous test sections were constructed on Osceola County roads A-34 and A-46 east of Ashton. Asphalt binders used were AC-5 asphalt cement, SC-800 liquid asphalt, MC-3000 cutback asphalt, CSS-1 emulsion and HFMS-2 emulsion. Aggregate for four of the test sections consisted of salvaged bituminous pavement and new aggregate combined. Each section was road mixed using a different binder arid placed 2-1/4" thick with a motor patrol. The other five test sections consisted of an AC-5 Type B asphalt concrete control section and four plant-mixed, cold-laid bituminous concrete overlay sections using new aggregate. The material was mixed in a continuous drum mix plant and laid with a full width paver.

Parenté flexible. Ajustements familiaux et accumulation de capitaux dans la diaspora chinoise en Polynésie française

Cet article interroge les pratiques familiales transnationales dans la diaspora chinoise à partir d'une étude plurigénérationnelle de la communauté chinoise en Polynésie française. Il conceptualise la notion de « parenté flexible » afin d'examiner comment la famille est mise au service de stratégies d'accumulation de divers capitaux culturels, symboliques, économiques mais aussi juridiques. La parenté flexible recouvre l'ensemble des pratiques consistant à jouer sur l'agencement et la composition de la famille en vue de s'ajuster aux, et de bénéficier des différentiels entre régimes et conjonctures en situation transnationale.Flexible Kinship. Family Adjustments and Capital Accumulation within the Chinese Diaspora in French PolynesiaDrawing from a multigenerational study of the Chinese community in French Polynesia, this article deals with transnational family practices in the Chinese diaspora. It conceptualizes the notion of "flexible kinship" to examine how family is used to develop strategies to accumulate various types of capital (cultural, symbolic, economic, as well as legal). Flexible kinship covers a range of practices that consist in playing on the arrangement and composition of the family group with the aim of adjusting to and profiting from differentials in regimes and conjunctures in a transnational situation.

Yhteisön langaton palvelualusta

Yhteisön langaton palvelualusta on konsepti langattomien yhteisöllisten verkkopalveluiden tarjoamiseen.Konsepti perustuu langattomaan WLAN-reititinlaitteeseen sekä Linux-käyttöjärjestelmäpohjaiseen laiteohjelmistoon, joiden avulla voidaan tarjota paikallisia, erilaisten pienten yhteisöjen käyttöön tarkoitettuja langattomia verkkopalveluita.Soveltuvia käyttökohteita voivat olla esimerkiksi asuntoyhteisöjen välinen tiedotuskanava tai perheen sisäinen viihdekeskus, jonka kautta voidaan tarjota yhteisön toimintaa helpottavia ja tavoitteita edistäviä palveluita. Yhteisön langattomat palvelut perustuvat vapaisiin ohjelmistoihin, jotka mahdollistavat monipuolisen palveluvalikoiman luomisen. Langattoman palvelualustan avulla pienten yhteisöjen tarvitsemat langattomat palvelut voidaan luoda helposti, edullisesti ja joustavasti, ilman kaupallisten palveluoperaattoreiden asettamia rajoituksia.

Aortic biological valve prosthesis in patients younger than 65 years of age: transition to a flexible age limit?

OBJECTIVES Guidelines proposed bioprosthesis implantation for aortic valve disease if the patients were at least 65 years old at the time of surgery, with a trend towards even younger patients in recent years. Considering the adverse effects of lifetime anticoagulation, new biological valves (less prone to degeneration) and new technologies may lead patients and surgeons to different choices. Therefore, it is interesting to analyse the results of aortic bioprosthetic valve replacement in patients aged <65 years at the time of surgery. METHODS From January 2000 to December 2010, 84 patients aged <65 years at the time of surgery had undergone an aortic bio-prosthetic valve replacement. A mid-term follow-up [(FU) mean FU time: 54.4 ± 39.2 months] was done in August 2011 in all patients (FU completeness: 100%). Results were compared with patients who had a mechanical prosthetic aortic valve replacement during the same period. RESULTS The reoperation rate for structural valve degeneration (SVD) of bioprostheses was 6% and occurred exclusively among patients <56 years. Contraindications for anticoagulation determined the choice of a bioprosthesis among 83% of these patients. The personal preference to avoid anticoagulation was the leading cause in 68% of the older patients (56-65 years). Neurological complications occurred more frequently in the mechanical control group. CONCLUSIONS Reoperations for SVD after bioprosthesis implantation occurred exclusively among younger patients (<56 years), not suitable for systemic anticoagulation. Previous studies, together with our experience, are in favour of an age limit between 56 and 60 years, taking into consideration alternative transcatheter approaches to SVD treatment.

On Modelling, System Identification and Control of Servo-Systems with a Flexible Load

The present study was done with two different servo-systems. In the first system, a servo-hydraulic system was identified and then controlled by a fuzzy gainscheduling controller. The second servo-system, an electro-magnetic linear motor in suppressing the mechanical vibration and position tracking of a reference model are studied by using a neural network and an adaptive backstepping controller respectively. Followings are some descriptions of research methods. Electro Hydraulic Servo Systems (EHSS) are commonly used in industry. These kinds of systems are nonlinearin nature and their dynamic equations have several unknown parameters.System identification is a prerequisite to analysis of a dynamic system. One of the most promising novel evolutionary algorithms is the Differential Evolution (DE) for solving global optimization problems. In the study, the DE algorithm is proposed for handling nonlinear constraint functionswith boundary limits of variables to find the best parameters of a servo-hydraulic system with flexible load. The DE guarantees fast speed convergence and accurate solutions regardless the initial conditions of parameters. The control of hydraulic servo-systems has been the focus ofintense research over the past decades. These kinds of systems are nonlinear in nature and generally difficult to control. Since changing system parameters using the same gains will cause overshoot or even loss of system stability. The highly non-linear behaviour of these devices makes them ideal subjects for applying different types of sophisticated controllers. The study is concerned with a second order model reference to positioning control of a flexible load servo-hydraulic system using fuzzy gainscheduling. In the present research, to compensate the lack of dampingin a hydraulic system, an acceleration feedback was used. To compare the results, a pcontroller with feed-forward acceleration and different gains in extension and retraction is used. The design procedure for the controller and experimental results are discussed. The results suggest that using the fuzzy gain-scheduling controller decrease the error of position reference tracking. The second part of research was done on a PermanentMagnet Linear Synchronous Motor (PMLSM). In this study, a recurrent neural network compensator for suppressing mechanical vibration in PMLSM with a flexible load is studied. The linear motor is controlled by a conventional PI velocity controller, and the vibration of the flexible mechanism is suppressed by using a hybrid recurrent neural network. The differential evolution strategy and Kalman filter method are used to avoid the local minimum problem, and estimate the states of system respectively. The proposed control method is firstly designed by using non-linear simulation model built in Matlab Simulink and then implemented in practical test rig. The proposed method works satisfactorily and suppresses the vibration successfully. In the last part of research, a nonlinear load control method is developed and implemented for a PMLSM with a flexible load. The purpose of the controller is to track a flexible load to the desired position reference as fast as possible and without awkward oscillation. The control method is based on an adaptive backstepping algorithm whose stability is ensured by the Lyapunov stability theorem. The states of the system needed in the controller are estimated by using the Kalman filter. The proposed controller is implemented and tested in a linear motor test drive and responses are presented.

Extending the canopy flow model for natural, highly flexible macrophyte canopies

Flow structures above vegetation canopies have received much attention within terrestrial and aquatic literature. This research has led to a good process understanding of mean and turbulent canopy flow structure. However, much of this research has focused on rigid or semi-rigid vegetation with relatively simple morphology. Aquatic macrophytes differ from this form, exhibiting more complex morphologies, predominantly horizontal posture in the flow and a different force balance. While some recent studies have investigated such canopies, there is still the need to examine the relevance and applicability of general canopy layer theory to these types of vegetation. Here, we report on a range of numerical experiments, using both semi-rigid and highly flexible canopies. The results for the semi-rigid canopies support existing canopy layer theory. However, for the highly flexible vegetation, the flow pattern is much more complex and suggests that a new canopy model may be required.

Customer Expectations and Organizational Buying Behavior in the Flexible Packaging Markets

Tämä työ on tehty yhteistyössä kansainvälisen metsäteollisuusyrityksen Stora Enson kanssa. Työ on osa Stora Enson strategiaa kehitettäessä uusia ja innovatiivisia pakkausmateriaaleja ja ratkaisuja joustopakkausmarkkinoille. Työn päätavoitteina oli selvittää, millaisia odotuksia tuotemerkkienomistajilla ja jatkojalostajilla on joustopakkauksista ja kuinka pakkausten ostopäätökset syntyvät monitahoisessa liikeympäristössä. Työn teoreettinen viitekehys jaettiin kahteen osaan. Asiakasodotuksia lähestyttiin tutkimalla eri palvelu- ja tuotelaadun ulottuvuuksia, ja teollisuuden ostokäyttäytymistä tutkittiin organisaatioiden ostokäyttämistä kuvaavien mallien avulla. Työn empiirisessä osuudessa käytettiin laadullista tutkimusmenetelmää käsittäen asiakashaastatteluja lähinnä Yhdysvalloissa. Haastateltavat yritykset koostuivat maailman johtavista kuluttajatuotteita valmistavista yrityksistä sekä jatkojalostajista. Tutkimustulosten mukaan odotukset pakkauksista liittyvät lähinnä tuotteen suojaamiseen sekä myynnin edistämiseen. Pääodotuksina on myös saada mahdollisimman edullisia papereita, mahdollisimman hyvillä barrier- ja paino-ominaisuuksilla. Tutkimustulokset osoittavat myös, että paperiyhtiöt ovat epäonnistuneet tekemään itseään tunnetuksi teollisuudelle ja heidän odotetaan olevan tulevaisuudessa aggressiivisempia ja innovatiivisempia. Tuotemerkkienomistajat ostavat pakkaukset ja pakkausmateriaalit normaalisti mieluiten jatkojalostajiensa kautta, mutta silti he toivovat yhteistyötä paperintoimittajien kanssa kunhan vain myös jatkojalostajat sisällytetään toimintaan mukaan.

Housing Wealth and Housing Decisions in Old Age: Sale and Reversion

Population ageing brings new challenges to long-term household economic decisions. In the event of old-age dependency, housing assets become a key self-insurance device. However, little empirical evidence has been reported regarding an individual"s expectations of having to use their housing wealth for such a purpose. This paper draws upon two complementary data sources to empirically examine: (1) the influence of housing assets on an individual"s willingness-to-sell (WTS) their dwelling for care purposes, and (2) the willingness to take out a reverse mortgage contract loan in the event of old-age dependency. The paper"s findings suggest that homeowners" WTS in old age is unaffected by their income or housing assets and is, rather, determined by socio-environmental housing characteristics and the individual"s health and personal needs. Conversely, the study finds that the uptake of home reversion loans is largely dependent on income or education, but not on a household"s housing assets.

On the Analysis and Control of a Linear Synchronous Servomotor with a Flexible Load

Industry's growing need for higher productivity is placing new demands on mechanisms connected with electrical motors, because these can easily lead to vibration problems due to fast dynamics. Furthermore, the nonlinear effects caused by a motor frequently reduce servo stability, which diminishes the controller's ability to predict and maintain speed. Hence, the flexibility of a mechanism and its control has become an important area of research. The basic approach in control system engineering is to assume that the mechanism connected to a motor is rigid, so that vibrations in the tool mechanism, reel, gripper or any apparatus connected to the motor are not taken into account. This might reduce the ability of the machine system to carry out its assignment and shorten the lifetime of the equipment. Nonetheless, it is usually more important to know how the mechanism, or in other words the load on the motor, behaves. A nonlinear load control method for a permanent magnet linear synchronous motor is developed and implemented in the thesis. The purpose of the controller is to track a flexible load to the desired velocity reference as fast as possible and without awkward oscillations. The control method is based on an adaptive backstepping algorithm with its stability ensured by the Lyapunov stability theorem. As a reference controller for the backstepping method, a hybrid neural controller is introduced in which the linear motor itself is controlled by a conventional PI velocity controller and the vibration of the associated flexible mechanism is suppressed from an outer control loop using a compensation signal from a multilayer perceptron network. To avoid the local minimum problem entailed in neural networks, the initial weights are searched for offline by means of a differential evolution algorithm. The states of a mechanical system for controllers are estimated using the Kalman filter. The theoretical results obtained from the control design are validated with the lumped mass model for a mechanism. Generalization of the mechanism allows the methods derived here to be widely implemented in machine automation. The control algorithms are first designed in a specially introduced nonlinear simulation model and then implemented in the physical linear motor using a DSP (Digital Signal Processor) application. The measurements prove that both controllers are capable of suppressing vibration, but that the backstepping method is superior to others due to its accuracy of response and stability properties.

The use of flexible quantile-based measures in risk assessment

A new family of distortion risk measures -GlueVaR- is proposed in Belles- Sampera et al. -2013- to procure a risk assessment lying between those provided by common quantile-based risk measures. GlueVaR risk measures may be expressed as a combination of these standard risk measures. We show here that this relationship may be used to obtain approximations of GlueVaR measures for general skewed distribution functions using the Cornish-Fisher expansion. A subfamily of GlueVaR measures satisfies the tail-subadditivity property. An example of risk measurement based on real insurance claim data is presented, where implications of tail-subadditivity in the aggregation of risks are illustrated.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.

Implementació d’un sistema SCADA a la cèl·lula de fabricació flexible MPS+2000C

L’Escola Politècnica Superior de la Universitat de Vic disposa d’una cèl·lula de fabricació flexible del fabricant Festo, que simula un procés d’emmagatzematge automàtic, aquesta cèl·lula esta composta per quatre estacions de muntatge diferenciades i independents, l’estació palets, l’estació plaques, l’estació magatzem intermedi i l’estació transport. Cada una d’aquestes estacions està formada per sensors i actuadors elèctrics i pneumàtics del fabricant Festo que van connectats a un PLC SIEMENS S7-300.Els quatre PLC’s (un per cada estació) estan connectats entre ells mitjançant el bus de comunicacions industrials Profibus. L’objectiu d’aquest treball consisteix en l’adaptació de la programació dels PLC’s i la realització d’un SCADA per tal de controlar el funcionament del conjunt de la cèl·lula de fabricació a través del software Vijeo Citect, d’aquesta manera es coneixerà el funcionament de la cèl·lula i permetrà treure’n rendiment per la docència. Aquest projecte ha estat realitzat en quatre fases principals. 1. Estudi i coneixement de les estacions, en aquesta fase s’han estudiat els manuals de funcionament de les estacions i s’han interpretat els codis de programació dels seus PLCs, amb l’objectiu de conèixer bé el programa per tal de interaccionar-hi més endavant amb el sistema SCADA 2. Disseny i programació del sistema SCADA, en aquesta fase s’ha realitzat tot el disseny gràfic de les pantalles de la interfície SCADA així com la programació dels objectes, la connexió amb els PLCs i la base de dades. 3. Posada en marxa del sistema complert, quan es coneixia abastament el funcionament de les estacions i el sistema SCADA estava completat s’ha fet la posada en marxa del conjunt i s’ha comprovat el correcte funcionament i interacció dels sistemes. 4. Realització de la memòria del projecte, en aquesta ultima fase s’ha realitzat la memòria del projecte on s’expliquen les característiques i funcionament de totes les estacions i del sistema SCADA. La conclusió més rellevant obtinguda en aquest treball, és la clara visualització de la potència i simplicitat que han aportat els sistemes SCADA al món de l’automatització, anys enrere per la supervisió de l’estat d’un sistema automatitzat era necessari disposar d’un gran espai amb grans panells de control formats per una gran quantitat de pilots lluminosos, potenciòmetres, interruptors, polsadors, displays i sobretot un voluminós i complexa cablejat, gràcies als sistemes SCADA avui en dia tot això pot quedar reduït a un PC o terminal tàctil, amb pantalles gràfiques clares i una gran quantitat d’opcions de supervisió control i configuració del sistema automatitzat.