Feasibility of the extended finite element method for the simulation of composite bonded joints

Adhesive-bonding for the unions in multi-component structures is gaining momentum over welding, riveting and fastening. It is vital for the design of bonded structures the availability of accurate damage models, to minimize design costs and time to market. Cohesive Zone Models (CZM’s) have been used for fracture prediction in structures. The eXtended Finite Element Method (XFEM) is a recent improvement of the Finite Element Method (FEM) that relies on traction-separation laws similar to those of CZM’s but it allows the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom. This work proposes and validates a damage law to model crack propagation in a thin layer of a structural epoxy adhesive using the XFEM. The fracture toughness in pure mode I (GIc) and tensile cohesive strength (sn0) were defined by Double-Cantilever Beam (DCB) and bulk tensile tests, respectively, which permitted to build the damage law. The XFEM simulations of the DCB tests accurately matched the experimental load-displacement (P-d) curves, which validated the analysis procedure.

Etude de populations de Glycymeris (Bivalvia, Glycymerididae) du Miocène d'Aquitaine, Sud-Ouest de la France

Abundant crops of Glycymeris have been made in the neritic bioclastic deposits of the Aquitaine Basin. After an outline about the Chattian taxa, the 5 Lower Miocene lineages are presented; G. cor is plainly predominant. Then, the Middle Miocene faunas are also detaiIed, G. inflatus and G. bimaculatus being the most frequent taxa. A test of biometrical analysis about the G. cor species is presented.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

Avoiding healthy cells extinction in a cancer model

We consider a dynamical model of cancer growth including three interacting cell populations of tumor cells, healthy host cells and immune effector cells. For certain parameter choice, the dynamical system displays chaotic motion and by decreasing the response of the immune system to the tumor cells, a boundary crisis leading to transient chaotic dynamics is observed. This means that the system behaves chaotically for a finite amount of time until the unavoidable extinction of the healthy and immune cell populations occurs. Our main goal here is to apply a control method to avoid extinction. For that purpose, we apply the partial control method, which aims to control transient chaotic dynamics in the presence of external disturbances. As a result, we have succeeded to avoid the uncontrolled growth of tumor cells and the extinction of healthy tissue. The possibility of using this method compared to the frequently used therapies is discussed. (C) 2014 Elsevier Ltd. All rights reserved.

On lattices from combinatorial game theory modularity and a representation theorem: finite case

We show that a self-generated set of combinatorial games, S. may not be hereditarily closed but, strong self-generation and hereditary closure are equivalent in the universe of short games. In [13], the question "Is there a set which will give a non-distributive but modular lattice?" appears. A useful necessary condition for the existence of a finite non-distributive modular L(S) is proved. We show the existence of S such that L(S) is modular and not distributive, exhibiting the first known example. More, we prove a Representation Theorem with Games that allows the generation of all finite lattices in game context. Finally, a computational tool for drawing lattices of games is presented. (C) 2014 Elsevier B.V. All rights reserved.

On chaos, transient chaos and ghosts in single populations models with allee effects

Density-dependent effects, both positive or negative, can have an important impact on the population dynamics of species by modifying their population per-capita growth rates. An important type of such density-dependent factors is given by the so-called Allee effects, widely studied in theoretical and field population biology. In this study, we analyze two discrete single population models with overcompensating density-dependence and Allee effects due to predator saturation and mating limitation using symbolic dynamics theory. We focus on the scenarios of persistence and bistability, in which the species dynamics can be chaotic. For the chaotic regimes, we compute the topological entropy as well as the Lyapunov exponent under ecological key parameters and different initial conditions. We also provide co-dimension two bifurcation diagrams for both systems computing the periods of the orbits, also characterizing the period-ordering routes toward the boundary crisis responsible for species extinction via transient chaos. Our results show that the topological entropy increases as we approach to the parametric regions involving transient chaos, being maximum when the full shift R(L)(infinity) occurs, and the system enters into the essential extinction regime. Finally, we characterize analytically, using a complex variable approach, and numerically the inverse square-root scaling law arising in the vicinity of a saddle-node bifurcation responsible for the extinction scenario in the two studied models. The results are discussed in the context of species fragility under differential Allee effects. (C) 2011 Elsevier Ltd. All rights reserved.

Congenital cytomegalovirus infection: occurrence in two socioeconomically distinct populations of a developing country

In São Paulo, Brazil, between November 1980 and July 1982, 1614 newborns of middle socioeconomic background and 1156 newborns of low socioeconomic background were examined for the occurrence of congenital cytomegalovirus (CMV) infection by isolation of virus from urine samples or detection of specific anti-CMV IgM in umbilical cord serum tested by immunofluorescence. In the low socioeconomic population prevalence of CMV complement-fixing antibodies in mothers was 84.4%(151/179) and the incidence of congenital infection assessed by virus isolation 0.98% (5/508), as compared with 0.46% (3/648) in the group of newborns tested by detection of specific anti-CMV IgM in umbilical cord-serum. In middle socioeconomic level population prevalence of CMV complement-fixing antibodies in mothers was 66.5% (284/427) and the incidence of CMV congenital infection was 0.39% (2/518) in the group of newborns screened by virus isolation and 0.18% (2/1096) in the group tested by detection of specific anti-CMV IgM. In the present study none of the 12 congenitally infected newborns presented clinical apparent disease at birth.

Hepatitis A antibodies in two socioeconomically distinct populations of São Paulo, Brazil

To evaluate the prevalence of antibody against hepatitis A in two socioeconomically distinct populations of a developing country, 540 serum specimens from children and adults living in São Paulo, Brazil, were tested for IgG anti HAV by a commercial radioimunoassay (Havab, Abbott Laboratories). The prevalence of anti-HAV in low socioeconomic level subjects was 75.0% in children 2-11 years old and 100.0% in adults, whereas in middle socioeconomic level significantly lower prevalences were observed (40.3% in chidren 2-11 years old and 91.9% in adults). Voluntary blood donors of middle socioeconomic level showed a prevalence of 90.4%. These data suggest that hepatitis A infection remains a highly endemic disease in São Paulo, Brazil.

Natural populations of saccharomyces kudriavzevii in Portugal are associated with oak bark and are sympatric with s. cerevisiae and s. paradoxus

Applied Environmental Microbiology, Vol. 74, nº7

Finite Element Analysis (FEA) applied to heat transfer optimization process of pultrusion die systems

The aim of this study is to optimize the heat flow through the pultrusion die assembly system on the manufacturing process of a specific glass-fiber reinforced polymer (GFRP) pultrusion profile. The control of heat flow and its distribution through whole die assembly system is of vital importance in optimizing the actual GFRP pultrusion process. Through mathematical modeling of heating-die process, by means of Finite Element Analysis (FEA) program, an optimum heater selection, die position and temperature control was achieved. The thermal environment within the die was critically modeled relative not only to the applied heat sources, but also to the conductive and convective losses, as well as the thermal contribution arising from the exothermic reaction of resin matrix as it cures or polymerizes from the liquid to solid condition. Numerical simulation was validated with basis on thermographic measurements carried out on key points along the die during pultrusion process.

Optimizing the embedded heaters position in the pultrusion process using finite element analysis

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimize heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed with basis on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Congruences on monoids of transformations preserving the orientation on a finite chain

Journal of Algebra, 321 (2009), p. 743–757

Etude de populations de Glycymeris (Bivalvia, Glycymerididae) du Miocène d'Aquitaine, Sud-Ouest de la France Studyof Glycymeris (Bivalvia, G1ycymerididae) populations from the Aquitaine Miocene, SW France

Abundant crops of Glycymeris have been made in the neritic bioclastic deposits of the Aquitaine Basin. After an outline about the Chattian taxa, the 5 Lower Miocene lineages are presented; G. cor is plainly predominant. Then, the Middle Miocene faunas are also detaiIed, G. inflatus and G. bimaculatus being the most frequent taxa. A test of biometrical analysis about the G. cor species is presented.

Toroid inductor development for a SIC DC-DC converter up to 150kW, based on finite element method

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia