Interpolação geoespacial da evapotranspiração de referência (ETo) em regiões com escassez de dados: estudo de caso no Sul de Minas Gerais, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of the use of stabilizer bracelet in a child with choreoathetoid cerebral palsy

Introduction: The use of stabilizer bracelet is a frequent treatment for movement disorders to strengthen muscles and adjust coordination. Still questions remain regarding the benefi t of using loads to decrease involuntary movements and the best load and placement. Objective: To measure the infl uence of the stabilizer bracelet on the kinematics and spatiotemporal parameters in planar movements performed by the upper limb. Method: One child, who has the spastic diplegy type of cerebral palsy with choreoathetoid component, and a control child without cerebral palsy, both female and 7 years old, were subjected to analysis of movements in relation to displacement, velocity, linear acceleration, and the calculation of mean square error (MSE) with and without use of stabilizer bracelet with loads of 25, 50, and 75% of the supported maximum load. Results: After comparing data between subjects, a difference was found between patient and control in all situations and variables. An inter-individual comparison using 25% of the maximum load showed the smallest difference with the NDE. Discussion and Conclusion: This therapeutic option is low cost, easy to apply, and does not signifi cantly interfere in the aesthetic of the individual. Therefore, physiotherapists may prescribe this for activities that require greater control of the upper limb because for the case studied the upper limb movement was more effi cient with the use of the stabilizer bracelet.

Avaliação de Técnicas de Interpolação de Imagens Digitais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fast determination of beef quality parameters with time-domain nuclear magnetic resonance spectroscopy and chemometrics

The noteworthy of this study is to predict seven quality parameters for beef samples using time-domain nuclear magnetic resonance (TD-NMR) relaxometry data and multivariate models. Samples from 61 Bonsmara heifers were separated into five groups based on genetic (breeding composition) and feed system (grain and grass feed). Seven sample parameters were analyzed by reference methods; among them, three sensorial parameters, flavor, juiciness and tenderness and four physicochemical parameters, cooking loss, fat and moisture content and instrumental tenderness using Warner Bratzler shear force (WBSF). The raw beef samples of the same animals were analyzed by TD-NMR relaxometry using Carr-Purcell-Meiboom-Gill (CPMG) and Continuous Wave-Free Precession (CWFP) sequences. Regression models computed by partial least squares (PLS) chemometric technique using CPMG and CWFP data and the results of the classical analysis were constructed. The results allowed for the prediction of aforementioned seven properties. The predictive ability of the method was evaluated using the root mean square error (RMSE) for the calibration (RMSEC) and validation (RMSEP) data sets. The reference and predicted values showed no significant differences at a 95% confidence level.

Mapeamento de QTL e análises de espectroscopia para teor de óleo visando aplicação em programas de melhoramento de soja

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Orientação e ortorretificação de imagens terrestres nadirais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mapeamento de cianobactérias por meio da fluorescência da ficocianina e de análise geoestatística

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tool condition monitoring of aluminum oxide grinding wheel in dressing operation using acoustic emission and neural networks

The grinding operation gives workpieces their final finish, minimizing surface roughness through the interaction between the abrasive grains of a tool (grinding wheel) and the workpiece. However, excessive grinding wheel wear due to friction renders the tool unsuitable for further use, thus requiring the dressing operation to remove and/or sharpen the cutting edges of the worn grains to render them reusable. The purpose of this study was to monitor the dressing operation using the acoustic emission (AE) signal and statistics derived from this signal, classifying the grinding wheel as sharp or dull by means of artificial neural networks. An aluminum oxide wheel installed on a surface grinding machine, a signal acquisition system, and a single-point dresser were used in the experiments. Tests were performed varying overlap ratios and dressing depths. The root mean square values and two additional statistics were calculated based on the raw AE data. A multilayer perceptron neural network was used with the Levenberg-Marquardt learning algorithm, whose inputs were the aforementioned statistics. The results indicate that this method was successful in classifying the conditions of the grinding wheel in the dressing process, identifying the tool as "sharp''(with cutting capacity) or "dull''(with loss of cutting capacity), thus reducing the time and cost of the operation and minimizing excessive removal of abrasive material from the grinding wheel.

Classification of intact açai (Euterpe oleracea Mart.) and jucara (Euterpe edulis Mart) fruits based on dry matter content by means of near infrared spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de um sistema de SHM sem fio e com compensação automática de temperatura

Pós-graduação em Engenharia Elétrica - FEIS

Análise de materiais para sistemas de fechamento ósseo através da caracterização superficial e comportamento mecânico

Pós-graduação em Engenharia Mecânica - FEB

Comparação entre modelos de análise genômica utilizando dados simulados e dados reais em ovinos

Pós-graduação em Genética e Melhoramento Animal - FCAV

Sistema baseado em regras fuzzy do tipo Takagi-Sugeno aplicado a ecos de radares meteorológicos

Pós-graduação em Ciências Ambientais - Sorocaba

Bovine Tuberculosis in Swedish Farmed Deer: Detection and Control of the Disease

Bovine tuberculosis (BTB) was introduced into Swedish farmed deer herds in 1987. Epidemiological investigations showed that 10 deer herds had become infected (July 1994) and a common source of infection, a consignment of 168 imported farmed fallow deer, was identified (I). As trace-back of all imported and in-contact deer was not possible, a control program, based on tuberculin testing, was implemented in July 1994. As Sweden has been free from BTB since 1958, few practicing veterinarians had experience in tuberculin testing. In this test, result relies on the skill, experience and conscientiousness of the testing veterinarian. Deficiencies in performing the test may adversely affect the test results and thereby compromise a control program. Quality indicators may identify possible deficiencies in testing procedures. For that purpose, reference values for measured skin fold thickness (prior to injection of the tuberculin) were established (II) suggested to be used mainly by less experienced veterinarians to identify unexpected measurements. Furthermore, the within-veterinarian variation of the measured skin fold thickness was estimated by fitting general linear models to data (skin fold measurements) (III). The mean square error was used as an estimator of the within-veterinarian variation. Using this method, four (6%) veterinarians were considered to have unexpectedly large variation in measurements. In certain large extensive deer farms, where mustering of all animals was difficult, meat inspection was suggested as an alternative to tuberculin testing. The efficiency of such a control was estimated in paper IV and V. A Reed Frost model was fitted to data from seven BTB-infected deer herds and the spread of infection was estimated (< 0.6 effective contacts per deer and year) (IV). These results were used to model the efficiency of meat inspection in an average extensive Swedish deer herd. Given a 20% annual slaughter and meat inspection, the model predicted that BTB would be either detected or eliminated in most herds (90%) 15 years after introduction of one infected deer. In 2003, an alternative control for BTB in extensive Swedish deer herds, based on the results of paper V, was implemented.

Comparison of multiple-input single-output single-user ultra-wideband systems with pre-distortion

This paper presents a performance analysis of a baseband multiple-input single-output ultra-wideband system over scenarios CM1 and CM3 of the IEEE 802.15.3a channel model, incorporating four different schemes of pre-distortion: time reversal, zero-forcing pre-equaliser, constrained least squares pre-equaliser, and minimum mean square error pre-equaliser. For the third case, a simple solution based on the steepest-descent (gradient) algorithm is adopted and compared with theoretical results. The channel estimations at the transmitter are assumed to be truncated and noisy. Results show that the constrained least squares algorithm has a good trade-off between intersymbol interference reduction and signal-to-noise ratio preservation, providing a performance comparable to the minimum mean square error method but with lower computational complexity. Copyright (C) 2011 John Wiley & Sons, Ltd.