Avaliação do potencial fisiológica de sementes de beterraba

As informações disponíveis na literatura nacional sobre a avaliação do vigor de sementes de beterraba são escassas, embora essa cultura seja de grande importância. O objetivo do trabalho foi definir metodologia para avaliar o potencial fisiológico das sementes, comparando resultados obtidos em laboratório com a emergência de plântulas em campo. Sementes de beterraba, cultivar Top Tall Early Wonder, representadas por cinco lotes adquiridos no comércio, foram avaliadas quanto à viabilidade (teste de germinação) e ao vigor (testes de primeira contagem, velocidade de germinação, envelhecimento acelerado tradicional e com solução saturada de NaCl e emergência de plântulas em campo). O teste de envelhecimento acelerado com solução salina saturada manteve baixo o teor de água e não reduziu a intensidade de deterioração das sementes. Os testes de envelhecimento acelerado tradicional e com solução de NaCl, ambos a 42ºC, mostraram-se adequados para identificar diferenças no potencial fisiológico de sementes de beterraba.

Deterioração controlada em sementes de beterraba

O uso de testes de vigor é fundamental na avaliação do potencial fisiológico de sementes produzidas e comercializadas. O trabalho foi realizado com o objetivo de estudar o uso do teste de deterioração controlada na avaliação do potencial fisiológico de sementes de beterraba. Após lavagem dos frutos contendo as sementes em água corrente, oito lotes da cultivar Top Tall Early Wonder foram previamente avaliados pelos testes de germinação e de emergência de plântulas (EP). Para o ajuste do teor de água (TA) foram estudados os métodos de atmosfera úmida (AU) e substrato úmido (SU). O teste de deterioração controlada (DC) foi conduzido com 22 e 24% de água e exposição durante 12, 24 e 36 horas à temperatura de 45 ºC. Usou-se o delineamento experimental inteiramente casualizado, com oito repetições de 25 sementes, exceto o de EP, conduzido com quatro repetições de 50 sementes. Os dados foram analisados separadamente para cada combinação TA x períodos de deterioração e as médias comparadas usando-se o teste de Tukey (P<0,05). Análises de correlação simples foram estabelecidas entre os resultados dos testes de laboratório e a EP. O ajuste do TA de semente deve ser feito pelo método do SU. O teste de DC pode ser utilizado para avaliar o potencial fisiológico de sementes de beterraba, sendo indicada a combinação TA de 22%, a 45ºC, durante 24 horas.

Mäntyöljyn tislauksen esikäsittely

Raakamäntyöljy on selluteollisuuden sivutuote. Suopa erotetaan mustalipeästä ja palstoitetaan tuottaen siten raakamäntyöljyä. Raakamäntyöljy tislataan tavanomaisesti viiteen pääjakeeseen: rasvahapot, hartsihapot, mäntyöljytisle, esiöljy ja mäntyöljypiki. Näiden jakeiden lisäksi raakamäntyöljyssä on erityisesti mustalipeästä siihen erottuneita epäpuhtauksia, jotka haittaavat raakamäntyöljyn prosessointia. Epäpuhtauksia ovat orgaaniset ja epäorgaaniset yhdisteet, kuten metallit, suolat ja ligniini. Nämä epäpuhtaudet aiheuttavat haitallisia reaktioita prosessissa huonontaen siten lopputuotejakeiden laatua. Tämän lisäksi epäpuhtaudet aiheuttavat saostumia prosessilaitteissa alentaen siten prosessointitehokkuutta. Raakamäntyöljyn esikäsittelyllä tehostetaan tislauksen toimintaa. Työssä esitetään esikäsittelymenetelmistä mm. degumming-menetelmä, laimea happopesu, hiilidioksidikäsittely, valkaisu ja lämpökäsittely. Menetelmien pohjalta valitaan tätä työtä varten yksi menetelmä, jonka pohjalta suunnitellaan kokeellisessa osassa suoritettavat kokeet. Kokeellinen osuus koostuu esikokeista, varsinaisista kokeista ja lisäkokeista. Menetelmän tarkoituksena on saavuttaa epäpuhtauksille 90–95 % reduktioaste. Kokeiden onnistumista tutkitaan analysoimalla alkuperäinen raakamäntyöljy, sekä jokaisen kokeen jälkeen erotetut faasit. Työssä saavutettiin hyvä erotustehokkuus. Alkuperäisen tavoitteen mukaista reduktioastetta ei pystytty määrittämään eri analyysimenetelmien ja niiden analyysituloksissa ilmenneiden eroavaisuuksien vuoksi, mutta lisäkokeiden ansiosta pystyttiin vahvistamaan kyseisen koejärjestelmän optimaalinen poistoaste. Lisäksi työssä havaittiin että esikäsittelytulos on hyvin riippuvainen käsiteltävän raaka-aineen koostumuksesta.

Grass-endophyte coevolution and ploidy levels in fescues

ABSTRACT Fescues consist of wild and cultivated grasses that have adapted to a wide range of environmental conditions. They are an excellent model species for evolutionary ecology studies that investigate symbiosis and polyploidization and their effects on plant performance. First, they are frequently infected with symbiotic endophytic fungi known to affect a plant’s ability to cope with biotic and abiotic environmental factors. Second, fescue species have been reported to have substantial intraspecific variation in their ploidy level and morphology. In my thesis, I examined large-scale generalizations for frequency of polyploidy and endophyte infections and their effects on plant morphology. As a model species, I selected red (Festuca rubra) and viviparous sheep’s (F. vivipara) fescues. They are closely related, but they differ in terms of distribution and endophyte infection frequency. I investigated the biogeographic pattern and population biology of 29 red and 12 viviparous sheep’s fescue populations across ≈300 latitudes in Europe (400-690 N). To examine plant ploidy levels, I implemented time- and cost-efficient plate-based high throughput flow cytometric analysis. This efficient procedure enabled me to analyze over 1000 red fescue individuals. I found three ploidy levels among them: overall 84 %, 9 % and 7 % of the red fescue plants were hexaploid, tetraploid and octoploid, respectively. However, all viviparous sheep’s fescue plants were tetraploid. Ploidy level of red fescue appeared to some extent follow gradients in latitude and primary production as suggested by previous studies, but these results could be explained better by taking the sampling design and local adaptation into account. Three Spanish populations were mostly tetraploids and one high elevation population in northernmost Finland (Halti) was octoploid, while most other populations (25 sites) were dominated by hexaploids. Endophyte infection frequencies of wild fescue populations varied from 0 to 81 % in red fescue populations and from 0 to 30 % in viviparous sheep’s fescue populations. No gradients with latitude or primary production of the sites were detected. As taxonomy of red fescues is somewhat unclear, I also studied morphology, ploidy variation and endophyte status of proposed subspecies of European red fescues. Contrary to previous literature, different ploidy levels occurred in the same subspecies. In addition to wild fescues, I also used two agronomically important cultivars of meadow and tall fescue (Schedonorus phoenix and S. pratensis). As grass-legume mixtures have an agronomic advantage over monocultures in meadows, I carried out a mixture/competition experiment with fescues and red clover to find that species composition, nutrient availability and endophyte status together determined the total biomass yield that was higher in mixtures compared to monocultures. The results of this thesis demonstrate the importance of local biotic and abiotic factors such as grazing gradients and habitat types, rather than suggested general global geographical or environmental factors on grass polyploidization or its association with symbiotic endophytic fungi. I conclude that variation in endophyte infection frequencies and ploidy levels of wild fescues support the geographic mosaic theory of coevolution. Historical incidents, e.g., glaciation and present local factors, rather than ploidy or endophyte status, determine fescue morphology.

Concordia Statue

The 8-foot tall Concordia statue made of bronze was unveiled in July of 1969. It was created by Canadian sculptress Eza Mayhew and weighs over 2500 lbs. Originally commissioned for Expo 67, it was later donated to Brock by Seagram's Distilling Company. The statue was placed just southeast of the Brock Tower, and still stands there today - between the Thistle Complex, Taro Hall, and Mackenzie Chown A Block. View facing northwest.

SchmonTower and Thistle East

The Schmon Tower can be seen here behind several tall trees located on the eastern edge of the Thistle Complex. This view is taken from approximately where Taro Hall stands.

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.

Proposal for Construction of Brock’s Monument, Queenston, newspaper fragment, 1824

Brock’s Monument is owned by Parks Canada and maintained by the Niagara Parks Commission in collaboration with the Friends of Fort George and Niagara National Historic Sites. It is located in Queenston Heights Park atop the Niagara Escarpment. On March 14, 1815, Parliament passed an act to erect a monument to the memory of General Isaac Brock. A design by engineer Francis Hall was selected. He envisioned a 135 ft. tall Tuscan column, made out of stone with a winding staircase inside. By the spring of 1824, work had begun on the monument. In June of that year, the cornerstone was laid and William Lyon Mackenzie was in attendance at the ceremony. It was on October 13th, 1824 (the anniversary of Brock’s death) that 6000 people traveled to Queenston to inter the remains of Brock and Lieutenant-Colonel Macdonell. This was the second burial for both. After 3 years the tower had reached 135 feet, but there was no inscription at the base, the fence around the observation deck had not been installed and there was no statue of Brock. Hall submitted a plan to finish the statue, but he was turned down and a simple ornament was placed where the Brock statue should have been. A massive blast of gunpowder destroyed the monument in 1840. It is alleged that an American sympathizer with the Upper Canada Rebellion set off the blast. Brock and Macdonell’s bodies were reburied in the Hamilton Family Cemetery in Queenston. The present monument was rebuilt in 1853. William Thomas (designer of St. Michael’s Cathedral in Toronto) was the architect. Brock and Macdonell were once again laid to rest in separate vaults at the statue. In 1968, Brock’s Monument was declared a national historical site. In 2005, it was closed to the public due to safety concerns, but it reopened in 2010. Source: http://www.thecanadianencyclopedia.com/articles/brocks-monument-queenston-heights

Maid of the Mist, Niagara, U.S.A.

The description of the image is "(6) Majestically Grand - the Falls from the 'Maid of the Mist,' Niagara, U.S.A.". The reverse of the image reads "You are on the deck of the small but sturdy little steamer that runs along near the foot of the falls. At this moment you are pretty nearly mid-stream, looking south. The American shore are up over your left shoulder. That tall, dark cliff at the extreme left of what you see is Goat Island. The people up there outlined against the sky look like dolls and no wonder; they are more than 160 feet above your head. Some of them are looking off over the unspeakable grandeurs of the Horseshoe Fall there at the right; some are without doubt looking down at the very boat and remarking that the passengers look like dolls. It is an awesome experience to go so near that never-ceasing downpour of waters from the sky. The air is full of the roar and iridescent spray, and it seems as if the boat must be drawn in under the overwhelming floods never to rise again. Yet, curiously enough, the river right around the boat is not so madly excited as you might expect. It seems more like some great creature, dazed, bewildered, stunned by some incredible experience and not yet quite aware of what has happened. (When it gets down into the Whirlpool Rapids, two miles below here, it is dramatically alive to its situation!) The gigantic curve of the cliffs, reaching in up-stream straight ahead, makes a contour line of over 3000 feet before it comes up against the Canadian banks on the west (right). Geologists say that the Falls ages ago must have been at least seven miles farther down the river (behind you) and have gradually won their way back. Even now the curve of the Horseshoe is worn away from two to four feet in a year. No wonder; 12, 000, 000 cubic feet of water (about 375, 000 tons) sweep over the rocks in one minute, and the same the next minute and the next and the next. See Niagara through the Stereoscope, with special maps locating all the landmarks about the Falls.

Les transformations microbiennes de l’azote dans les grandes rivières

Les rivières reçoivent de l'azote de leurs bassins versants et elles constituent les derniers sites de transformations des nutriments avant leur livraison aux zones côtières. Les transformations de l’azote inorganique dissous en azote gazeux sont très variables et peuvent avoir un impact à la fois sur l’eutrophisation des côtes et les émissions de gaz à effet de serre à l’échelle globale. Avec l’augmentation de la charge en azote d’origine anthropique vers les écosystèmes aquatiques, les modèles d’émissions de gaz à effet de serre prédisent une augmentation des émissions d’oxyde nitreux (N2O) dans les rivières. Les mesures directes de N2O dans le Lac Saint-Pierre (LSP), un élargissement du Fleuve Saint-Laurent (SLR) indiquent que bien qu’étant une source nette de N2O vers l'atmosphère, les flux de N2O dans LSP sont faibles comparés à ceux des autres grandes rivières et fleuves du monde. Les émissions varient saisonnièrement et inter-annuellement à cause des changements hydrologiques. Les ratios d’émissions N2O: N2 sont également influencés par l’hydrologie et de faibles ratios sont observés dans des conditions de débit d'eau plus élevée et de charge en N élevé. Dans une analyse effectuée sur plusieurs grandes rivières, la charge hydraulique des systèmes semble moduler la relation entre les flux de N2O annuels et les concentrations de nitrate dans les rivières. Dans SLR, des tapis de cyanobactéries colonisant les zones à faible concentration de nitrate sont une source nette d’azote grâce à leur capacité de fixer l’azote atmosphérique (N2). Étant donné que la fixation a lieu pendant le jour alors que les concentrations d'oxygène dans la colonne d'eau sont sursaturées, nous supposons que la fixation de l’azote est effectuée dans des micro-zones d’anoxie et/ou possiblement par des diazotrophes hétérotrophes. La fixation de N dans les tapis explique le remplacement de près de 33 % de la perte de N par dénitrification dans tout l'écosystème au cours de la période d'étude. Dans la portion du fleuve Hudson soumis à la marée, la dénitrification et la production de N2 est très variable selon le type de végétation. La dénitrification est associée à la dynamique en oxygène dissous particulière à chaque espèce durant la marée descendante. La production de N2 est extrêmement élevée dans les zones occupées par les plantes envahissantes à feuilles flottantes (Trapa natans) mais elle est négligeable dans la végétation indigène submergée. Une estimation de la production de N2 dans les lits de Trapa durant l’été, suggère que ces lits représentent une zone très active d’élimination de l’azote. En effet, les grands lits de Trapa ne représentent que 2,7% de la superficie totale de la portion de fleuve étudiée, mais ils éliminent entre 70 et 100% de l'azote total retenu dans cette section pendant les mois d'été et contribuent à près de 25% de l’élimination annuelle d’azote.

Fonctions du facteur de transcription SCL dans les cellules souches et les progéniteurs hématopoïétiques

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

Coconut Phenology and Yield Response to Climate Variability and Change

The present investigation on “Coconut Phenology and Yield Response to Climate Variability and Change” was undertaken at the experimental site, at the Regional Station, Coconut Development Board, KAU Campus, Vellanikkara. Ten palms each of eight-year-old coconut cultivars viz., Tiptur Tall, Kuttiadi (WCT), Kasaragod (WCT) and Komadan (WCT) were randomly selected.The study therefore, reinforces our traditional knowledge that the coconut palm is sensitive to changing weather conditions during the period from primordium initiation to harvest of nuts (about 44 months). Absence of rainfall from December to May due to early withdrawal of northeast monsoon, lack of pre monsoon showers and late onset of southwest monsoon adversely affect the coconut productivity to a considerable extent in the following year under rainfed conditions. The productivity can be increased by irrigating the coconut palm during the dry periods.Increase in temperature, aridity index, number of severe summer droughts and decline in rainfall and moisture index were the major factors for a marginal decline or stagnation in coconut productivity over a period of time, though various developmental schemes were in operation for sustenance of coconut production in the State of Kerala. It can be attributed to global warming and climate change. Therefore, there is a threat to coconut productivity in the ensuing decades due to climate variability and change. In view of the above, there is an urgent need for proactive measures as a part of climate change adaptation to sustain coconut productivity in the State of Kerala.The coconut productivity is more vulnerable to climate variability such as summer droughts rather than climate change in terms of increase in temperature and decline in rainfall, though there was a marginal decrease (1.6%) in the decade of 1981-2009 when compared to that of 1951-80. This aspect needs to be examined in detail by coconut development agencies such as Coconut Development Board and State Agriculture Department for remedial measures. Otherwise, the premier position of Kerala in terms of coconut production is likely to be lost in the ensuing years under the projected climate change scenario. Among the four cultivars studied, Tiptur Tall appears to be superior in terms of reproduction phase and nut yield. This needs to be examined by the coconut breeders in their crop improvement programme as a part of stress tolerant under rainfed conditions. Crop mix and integrated farming are supposed to be the best combination to sustain development in the long run under the projected climate change scenarios. Increase in coconut area under irrigation during summer with better crop management and protection measures also are necessary measures to increase coconut productivity since the frequency of intensity of summer droughts is likely to increase under projected global warming scenario.

Effects of plant diversity on bioenergy parameters in grassland biomass

Extensive grassland biomass for bioenergy production has long been subject of scientific research. The possibility of combining nature conservation goals with a profitable management while reducing competition with food production has created a strong interest in this topic. However, the botanical composition will play a key role for solid fuel quality of grassland biomass and will have effects on the combustion process by potentially causing corrosion, emission and slagging. On the other hand, botanical composition will affect anaerobic digestibility and thereby the biogas potential. In this thesis aboveground biomass from the Jena-Experiment plots was harvested in 2008 and 2009 and analysed for the most relevant chemical constituents effecting fuel quality and anaerobic digestibility. Regarding combustion, the following parameters were of main focus: higher heating value (HHV), gross energy yield (GE), ash content, ash softening temperature (AST), K, Ca, Mg, N, Cl and S content. For biogas production the following parameters were investigated: substrate specific methane yield (CH4 sub), area specific methane yield (CH4 area), crude fibre (CF), crude protein (CP), crude lipid (CL) and nitrogen-free extract (NfE). Furthermore, an improvement of the fuel quality was investigated through applying the Integrated generation of solid Fuel and Biogas from Biomass (IFBB) procedure. Through the specific setup of the Jena-Experiment it was possible to outline the changes of these parameters along two diversity gradients: (i) species richness (SR; 1 to 60 species) and (ii) functional group (grasses, legumes, small herbs and tall herbs) presence. This was a novel approach on investigating the bioenergy characteristic of extensive grassland biomass and gave detailed insight in the sward-composition¬ - bioenergy relations such as: (i) the most relevant SR effect was the increase of energy yield for both combustion (annual GE increased by 26% from SR8→16 and by 65% from SR8→60) and anaerobic digestion (annual CH4 area increased by 22% from SR8→16 and by 49% from SR8→60) through a strong interaction of SR with biomass yield; (ii) legumes play a key role for the utilization of grassland biomass for energy production as they increase the energy content of the substrate (HHV and CH4 sub) and the energy yield (GE and CH4 area); (iii) combustion is the conversion technique that will yield the highest energy output but requires an improvement of the solid fuel quality in order to reduce the risk of corrosion, emission and slagging related problems. This was achieved through applying the IFBB-procedure, with reductions in ash (by 23%), N (28%), K (85%), Cl (56%) and S (59%) and equal levels of concentrations along the SR gradient.

Piezoelectric Ultrasonic Micromotors

This report describes development of micro-fabricated piezoelectric ultrasonic motors and bulk-ceramic piezoelectric ultrasonic motors. Ultrasonic motors offer the advantage of low speed, high torque operation without the need for gears. They can be made compact and lightweight and provide a holding torque in the absence of applied power, due to the traveling wave frictional coupling mechanism between the rotor and the stator. This report covers modeling, simulation, fabrication and testing of ultrasonic motors. Design of experiments methods were also utilized to find optimal motor parameters. A suite of 8 mm diameter x 3 mm tall motors were machined for these studies and maximum stall torques as large as 10^(- 3) Nm, maximum no-load speeds of 1710 rpm and peak power outputs of 27 mW were realized. Aditionally, this report describes the implementation of a microfabricated ultrasonic motor using thin-film lead zirconate titanate. In a joint project with the Pennsylvania State University Materials Research Laboratory and MIT Lincoln Laboratory, 2 mm and 5 mm diameter stator structures were fabricated on 1 micron thick silicon nitride membranes. Small glass lenses placed down on top spun at 100-300 rpm with 4 V excitation at 90 kHz. The large power densities and stall torques of these piezoelectric ultrasonic motors offer tremendous promis for integrated machines: complete intelligent, electro-mechanical autonomous systems mass-produced in a single fabrication process.