Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails

Perfil dos pesquisadores PQ do CNPQ da área de Engenharia de Produção

There is a need for ongoing evaluation of the researchers not only engineering and production in all areas of knowledge engineering. To check the quality and veracity of scientific production, the CNPq is a brazillian government agency designed to evaluate researchers, classify them and give the encouragement and incentive for their research. This study quantifies the CNPq researchers in the field of Production Engineering according to the time of operation in research, number of guidelines for masters and doctoral, number of articles in national and international journals or magazines and congresses. The classification of these researchers, according to the proposed quantification, is confronted with the level of research they have in CNPq. The researcher starts his career at level 2, after it spending levels for 1D, 1C, 1B reaches to the highest level 1A. The main conclusion to be drawn from this study is that excellent researchers with a significant number of guidelines, bitter years in the early levels because of the rules of the CNPq which only allows a researcher to achieve the highest levels after many years of research

Sintese e caracterização da resina fenol-furfurílica para a obtenção de carbono vítreo monolítico

The monolithic glassy carbon is a carbonaceous material, isotropic, non graphitizable obtained by means of carbonization of resins up to 1000 °C. The good physicochemical properties make this material applied in several areas such as aerospace, medicine, electronics, chemistry, among others. It has generally been processed from the use of phenolic and furfuryl alcohol resins. These resins have high crosslink density and high fixed carbon content and are therefore widely applied in aerospace. The combination phenol / furfuryl alcohol resins search for obtaining the most suitable process for the glass-like carbon processing with phenolic resins currently available and of lower cost and easier to synthesize than the furfuryl alcohol resin. The main objective of this work is to obtain a phenol-furfuryl resin with high fixed carbon content combined with low porosity of the material. Different synthesis routes have been adopted along with thermal analysis techniques, FTIR and image analysis. The resin obtained through partial synthesis process presented the characteristics sought in this work

Contribuições do PIBID para a formação inicial de professores: um olhar dos licenciandos em física da Faculdade de Engenharia de Guaratinguetá

The current work aims to analyze the contributions of PIBID for initial graduation of the teachers, in view of the undergraduates of Physics Course at UNESP Guaratinguetá . A brief literature survey about the national situation of teacher education was performed, at which the main difficulties and challenges, as well as the solutions stated in place by the government to solve them, have been highlighted. A description of the historical of PIBID at UNESP, from the institutional project to reach the subproject developed by Physics Course of Guaratinguetá, was presented. To characterize the development of the subproject, it was performed a survey on the activities performed by the PIBID’s scholars, since its implementation on campus in 2010 until the end of the year 2013, in order to map the experiences lived by program participants. These data were obtained from the analysis of reports by scholars themselves, video analyzes and record of the weekly meetings held by the group, reading electronic messages exchanged on a specific group of e-mails and written evaluations by members of the program. Completing data collection, eleven scholars undergraduates of the program were interviewed, and the results were classified by topics, defined from recurrence in the interviewees speech. The global analysis of the data was based on theoretical references commonly used in research on graduation of teachers, as Nóvoa (1992), Mizukami (2005, 2006) and Gatti (2008). The results indicate that the licensed ones see in PIBID a differentiated opportunity for initial teaching graduation, for adding practical learning experiences for students of EB within the school context, and especially for creating space for reflection on their experiences with the support of more experienced teachers, committed to the training of all involved ones

Abordagem scrum de gerenciamento ágil para desenvolvimento de novos produtos aplicada a área de ensaios de uma fabricante de aeronaves

There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer

Estudo da utilização do balanced scorecard na gestão da qualidade e excelência operacional aplicadas a projetos de engenharia em sistemas de potência

The expansion of the electrical system is currently a subject of great importance to the development of Brazil. For its realization, large projects are needed, requiring large-scale investment and realization processes of great complexity. Thus, this type of project has a high strategic importance for the performance of companies that conduct. Seeking a way to determine a method to align traditional practices for measuring quality to the corporate strategic needs, this work is the study of the use of the balanced scorecard methodology, applying quality management and operational excellence, with a focus on projects in power systems. We analyzed some cases of successful application of the methodology in business segments in the next study, culminating in a proposed model of the method

Criação de novo procedimento de engenharia que possibilite a rastreabilidade das tubulações de uma indústria química

The number of piping in an industry is high. Through this piping are conducted several kind of products at several temperature and pressure conditions. In a chemical company, the piping quantity conducting harmful chemical products to human health and to the environment is higher. Nowadays the theme sustainability is often mentioned and harm to environment may cause irreversible damage to the human being, to the fauna, to the flora and to company´s credibility. In this context, controlling over the piping to avoid accidents is mandatory. The objective of this monograph is to create a procedure which enables the chemical companies piping traceability. This monograph analyses the several existent traceability system in the three economy sectors and approaches the technical question of industrial piping in order to create a procedure that achieves its objectives as a technical document and at the same time be economically feasible, with low complexibility level and high practicability. Some possibilities to elaborate this procedure had been studied, as the creation of an alphanumeric code and making with a chisel in the pipeline based on ASTM F2897 and the use of chips to store the information. However, the procedure which best meet the requirement as low cost and high applicability is filling out an electronic plan with information about welding process, welding certification, welding consumables and inspections

Avaliação da usinagem do INCONEL 718

The nickel superalloys are known as being a material with poor machinability, they have some properties like high hardness, good resistance at high temperature, tendency to weld with the tool material at high temperature, etc. In the aerospace, biomedical and petrochemical industry, are increasing the need to use materials that resist to aggressive process and environment. In these uses, it has increased the use of nickel-based superalloys like Inconel 718 and consequently the need to research new techniques and tools to improve the machinability of this material. For the superalloys and resistant alloys at high temperatures is considered that the difficulty in the machining regards to the combination of the relatively high cutting forces and high temperatures that grow during the machine process, causing deformation or breakage of the cutting tool. This work purpose is to develop the study of the machining of external cylindrical turning of the nickel based alloy Inconel 718, using ceramic tools, seeking the optimization of machining this alloy, looking to provide real productive increases without the need of investments in new production means. The machining test were accomplished using commercials hard metal tools and the results were compared each other to find the best tool and the best parameter. The conclusion is that the tool TNMG160408-23 -class 1005- was the better one, when used with the parameter 60_15_08

Avaliação da colagem de suportes utilizados para fixar cabos elétricos em aeronaves

The most usual method to fix supports that hold the vast majority of electrical cables on an aircraft is accomplished by using, for this purpose, rivets. However, this procedure may some cause some inconveniences such as the need of effecting holes in the structure that is intended to fix these supports, thus decreasing resistance of the structure. In order to have an alternative to seek an increase in the performance of structured materials, the aircraft industry, like other industries, have been studying the use of collage as a method of replacing this usual forms. Against this backdrop, this paper aims to assess the strength and durability of a joint bonded using the adhesive EA9394, manufactured by company Henkel Corporation, and perform a careful survey of the mechanical performance of riveted structures, taking into account different types of conditioning environment and thus create a database that can be used by the aerospace industry

Análise dos fatores de desempenho do ENADE: estudo parao curso de engenharia de produção mecânica

This work has the propose to discuss the National Examination Performance of students for the course in Production Engineering , from 2005 up to 2011, subsidies are shown how this came about assessment and how the course has been evaluated in recent years . Compares higher education from public and private universities in Brazil and is also discussed how important a good performance in the exam. Qualitative and quantitative surveys were conducted at different times that the work that enables a critical analysis of the examination , the institution and also the students themselves , so the list is the main motivators for the exam and also what should be done to obtaining good results in academic performance. Motivators for the exam has highlighted its importance is paramount and the consent of all involved from the beginning of the course to ensure that the examination is compulsory for all graduates of undergraduate manufacturing engineering in Brazil

Análise macro e micrográfica da liga AA-356 conforme a taxa de resfriamento

The present work aims to study the characteristics of the alloy Al - 7 % Si - 0 , 3Mg ( AA356 ) , more specifically characterize the macrostructure and microstructure and mechanical properties of the alloy ingots AA356 obtained in metal molds and sand molds for power studying the structures through the difference of cooling rates . This alloy is explained by the fact of referring league has excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability , high wear resistance , high strength to weight ratio, has wide application in general engineering , and particularly in the automotive and aerospace engineering . In this work we will verify this difference in properties through two different cooling rates . We monitor the solid solidification temperatures by thermocouples building with them the cooling curve as a tool that will aid us to evaluate the effectiveness of the grain refining because it achieved with some important properties of the alloy as the latent heat of solidification fraction the liquid and solid temperatures, the total solidification time, and identify the presence of inoculants for grain refinement. Thermal analysis will be supported by the study of graphic software “Origin “will be achieved where the cooling curve and its first derivative that is the cooling rate. Made thermal analysis, analysis will be made in macrographs ingots obtained for observation of macrostructures obtained in both types of ingots and also analysis of micrographs where sampling will occur in strategic positions ingots to correlate with the microstructure. Finally will be collecting data from Brinell hardness of ingots and so then correlating the properties of their respective ingots with cooling rate. We found that obtained with cast metal ingots showed superior properties to the ingots obtained with sand mold

Viabilidade técnica e econômica na utilização de um sistema fotovoltaico para alimentação de luminárias LED na Faculdade de Engenharia do Campus de Guaratinguetá SP

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable way is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. This academic work aims to bring a possible alternative to reduce the consumption of eletrical energy, at the University of Engineering – Campus of Guaratinguetá, through the use of a photovoltaic system interconnected to the LED bulbs. For this, the necessary data for the design of the photovoltaic system componentes and their acquisition costs were obtained and three differents configurations were developed to choose the one that bests fits the studied case, considering the return time of the initial investment (payback)

Analise dos trabalhos de conclusão do curso de engenharia de produção da UNESP de Guaratinguetá

This work is quantified according to the ABEPRO areas, the number of works the Course Conclusion (TCCs) and Hours (CH) Course of Production Engineering, UNESP Guaratinguetá. Based on this quantification were found to be significant discrepancies between the TCCs and CH. Quality and Logistics observed for the larger discrepancies, with 26% and 17% of the number of TCCs, respectively. Both areas have only 6% of the time. They are also used data from researchers at the National Council of Scientific and Technological Development (CNPq) in the areas of Production Engineering. In the area of Quality and Logistics, the researchers account for 8% and 5%, respectively, but are most prominent researchers in the field of Operations Research, with 37%. However, this view can help the department to organize the curriculum, with the development of teaching projects, methods and means of education, and visibility to help future hiring for the department

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá

Influência do condicionamento ambiental sobre as propriedades viscoelásticas de compósitos aramida/epóxi

The increasing application of structural composites in the aerospace industry is mainly due to its low specific weight coupled with its excellent mechanical properties when in service. As a result of climatic variations that pass the aircraft is of paramount importance to study the influence of weathering on this type of material when subjected to such changes. The purpose of this work is to evaluate the mechanical behavior of specimens of kevlar fiber /epoxy matrix composites, by dynamic mechanical thermal analysis (DMA) and interlaminar shear strength tests (ILSS), after passing through three environmental conditioning: saline fog, hygrothermal and ultraviolet radiation. From the results, we concluded that the laminate was molded supplied homogeneously, not presenting problems such as porosity, delaminations or cracks inside. After a period of 625 hours of exposure to hygrothermal conditioning, we observed a 1,2% maximum of absorption of moisture. Samples subjected to the conditioning by UV irradiation (600 hours) and salt spray showed a reduction of about 24,30% and 32,30%, respectively, on the shear strength (ILSS). In DMA analysis is not observed significant changes on the glass transition temperature. However, when considering the storage modulus of the samples conditioned by UV radiation (1200 hours), salt spray and hygrothermal conditioning there is an increase of 5,34% , 7,19% and 5,57% respectively