Produção de electricidade em Portugal

In the present work we intend to do an analysis of the production of electricity in special regime in Portugal. We will focus in particular in the remuneration system through the feed-in tariffs. First, we will excurse throughout different legal diplomas that regulated the special regime in Portugal, exploring which guarantees were conferred to electricity generators throughout the years. We intend to also evaluate how the producers remunerative rights were (or not) protected in the various legislative changes. In the second part of the dissertation we will examine whether the feed-in tariffs may be considered as State aid. Due to the inclusion of the subject in EU Law, we will analyze EU regulation and case law to support our position about the Portuguese regime. Finally, and to the extent that the production of electricity in special regime has undergone several changes to its remunerative regime in the last few years, we propose to analyze more carefully the amendments in question. We will scrutinize the reasons that based the amendments in question, which are mainly based on the economic crisis suffered by the country. We will also examine how those changes may jeopardize the remunerative rights of the producers.

Canadian Niagara Power Company fonds

Power at the Falls: The first recorded harnessing of Niagara Falls power was in 1759 by Daniel Joncairs. On the American side of the Falls he dug a small ditch and drew water to turn a wheel which powered a sawmill. In 1805 brothers Augustus and Peter Porter expanded on Joncairs idea. They bought the American Falls from New York State at public auction. Using Joncairs old site they built a gristmill and tannery which stayed in business for twenty years. The next attempt at using the Falls came in 1860 when construction of the hydraulic canal began by the Niagara Falls Hydraulic Power and Manufacturing Co. The canal was complete in 1861 and brought water from the Niagara river, above the falls, to the mills below. By 1881 the Niagara Falls Hydraulic Power and Manufacturing Co. had a small generating station which provided some electricity to the village of Niagara Falls and the Mills. This lasted only four years and then the company sold its assets at public auction due to bankruptcy. Jacob Schoellkopf arrived at the Falls in 1877 with the purchase of the hydraulic canal land and water and power rights. In 1879 Schoellkopf teamed up with Charles Brush (of Euclid Ohio) and powered Brush’s generator and carbon arc lights with the power from his water turbines, to illuminate the Falls electrically for the first time. The year 1895 marked the opening of the Adam No. 1 generating station on the American side. The station was the beginnings of modern electrical utility operations. The design and operations of the generating station came from worldwide competitions held by panels of experts. Some who were involved in the project include; George Westinghouse, J. Pierpont Morgan, Lord Kelvin and Nikoli Tesla. The plants were operated by the Niagara Falls Power Company until 1961, when the Robert Moses Plant began operation in Lewiston, NY. The Adams plants were demolished that same year and the site used as a sewage treatment plant. The Canadian side of the Falls began generating their own power on January 1, 1905. This power came from the William Birch Rankine Power Station located 500 yards above the Horseshoe Falls. This power station provided the village of Fort Erie with its first electricity in 1907, using its two 10,000 electrical horsepower generators. Today 11 generators produce 100,000 horsepower (75 megawatts) and operate as part of the Niagara Mohawk and Fortis Incorporated Power Group.

Carboxydothermus hydrogenoformans comme catalyseur biologique pour la conversion du monoxyde de carbone en hydrogène simultanément a la minéralisation de calcium et phosphate

La gazéification est aujourd'hui l'une des stratégies les plus prometteuses pour valoriser les déchets en énergie. Cette technologie thermo-chimique permet une réduction de 95 % de la masse des intrants et génère des cendres inertes ainsi que du gaz de synthèse (syngaz). Le syngaz est un combustible gazeux composé principalement de monoxyde de carbone (CO), d'hydrogène (H2) et de dioxyde de carbone (CO2). Le syngaz peut être utilisé pour produire de la chaleur et de l'électricité. Il est également la pierre angulaire d'un grand nombre de produits à haute valeur ajoutée, allant de l'éthanol à l'ammoniac et l'hydrogène pur. Les applications en aval de la production de syngaz sont dictées par son pouvoir calorifique, lui-même dépendant de la teneur du gaz en H2. L’augmentation du contenu du syngaz en H2 est rendu possible par la conversion catalytique à la vapeur d’eau, largement répandu dans le cadre du reformage du méthane pour la production d'hydrogène. Au cours de cette réaction, le CO est converti en H2 et CO2 selon : CO + H2O → CO2 + H2. Ce processus est possible grâce à des catalyseurs métalliques mis en contact avec le CO et de la vapeur. La conversion catalytique à la vapeur d’eau a jusqu'ici été réservé pour de grandes installations industrielles car elle nécessite un capital et des charges d’exploitations très importantes. Par conséquent, les installations de plus petite échelle et traitant des intrants de faible qualité (biomasse, déchets, boues ...), n'ont pas accès à cette technologie. Ainsi, la seule utilisation de leur syngaz à faible pouvoir calorifique, est limitée à la génération de chaleur ou, tout au plus, d'électricité. Afin de permettre à ces installations une gamme d’application plus vaste de leurs syngaz, une alternative économique à base de catalyseur biologique est proposée par l’utilisation de bactéries hyperthermophiles hydrogénogènes. L'objectif de cette thèse est d'utiliser Carboxydothermus hydrogenoformans, une bactérie thermophile carboxydotrophe hydrogénogène comme catalyseur biologique pour la conversion du monoxyde de carbone en hydrogène. Pour cela, l’impact d'un phénomène de biominéralisation sur la production d’H2 a été étudié. Ensuite, la faisabilité et les limites de l’utilisation de la souche dans un bioréacteur ont été évaluées. Tout d'abord, la caractérisation de la phase inorganique prédominante lorsque C. hydrogenoformans est inoculé dans le milieu DSMZ, a révélé une biominéralisation de phosphate de calcium (CaP) cristallin en deux phases. L’analyse par diffraction des rayons X et spectrométrie infrarouge à transformée de Fourier de ce matériau biphasique indique une signature caractéristique de la Mg-whitlockite, alors que les images obtenues par microscopie électronique à transmission ont montré l'existence de nanotiges cristallines s’apparentant à de l’hydroxyapatite. Dans les deux cas, le mode de biominéralisation semble être biologiquement induit plutôt que contrôlé. L'impact du précipité de CaP endogène sur le transfert de masse du CO et la production d’H2 a ensuite été étudié. Les résultats ont été comparés aux valeurs obtenues dans un milieu où aucune précipitation n'est observée. Dans le milieu DSMZ, le KLa apparent (0.22 ± 0.005 min-1) et le rendement de production d’H2 (89.11 ± 6.69 %) étaient plus élevés que ceux obtenus avec le milieu modifié (0.19 ± 0.015 min-1 et 82.60 ± 3.62% respectivement). La présence du précipité n'a eu aucune incidence sur l'activité microbienne. En somme, le précipité de CaP offre une nouvelle stratégie pour améliorer les performances de transfert de masse du CO en utilisant les propriétés hydrophobes de gaz. En second lieu, la conversion du CO en H2 par la souche Carboxydothermus hydrogenoformans fut étudiée et optimisée dans un réacteur gazosiphon de 35 L. Parmi toutes les conditions opérationnelles, le paramètre majeur fut le ratio du débit de recirculation du gaz sur le débit d'alimentation en CO (QR:Qin). Ce ratio impacte à la fois l'activité biologique et le taux de transfert de masse gaz-liquide. En effet, au dessus d’un ratio de 40, les performances de conversion du CO en H2 sont limitées par l’activité biologique alors qu’en dessous, elles sont limitées par le transfert de masse. Cela se concrétise par une efficacité de conversion maximale de 90.4 ± 0.3 % et une activité spécifique de 2.7 ± 0.4 molCO·g–1VSS·d–1. Malgré des résultats prometteurs, les performances du bioréacteur ont été limitées par une faible densité cellulaire, typique de la croissance planctonique de C. hydrogenoformans. Cette limite est le facteur le plus contraignant pour des taux de charge de CO plus élevés. Ces performances ont été comparées à celles obtenues dans un réacteur à fibres creuses (BRFC) inoculé par la souche. En dépit d’une densité cellulaire et d’une activité volumétrique plus élevées, les performances du BRFC à tout le moins cinétiquement limitées quand elles n’étaient pas impactées par le transfert de masse, l'encrassement et le vieillissement de la membrane. Afin de parer à la dégénérescence de C. hydrogenoformans en cas de pénurie de CO, la croissance de la bactérie sur pyruvate en tant que seule source de carbone a été également caractérisée. Fait intéressant, en présence simultanée de pyruvate et de CO, C. hydrogenoformans n’a amorcé la consommation de pyruvate qu’une fois le CO épuisé. Cela a été attribué à un mécanisme d'inhibition du métabolisme du pyruvate par le CO, faisant ainsi du pyruvate le candidat idéal pour un système in situ de secours.

Les influences transnationales sur la nationalisation de l’électricité au Québec (1934-1963)

Ce mémoire de maîtrise analyse les influences transnationales qui ont mené à la nationalisation de l’électricité au Québec. En contraste avec les précédentes études sur Hydro-Québec voulant que les incitatifs locaux fussent la source exclusive de la nationalisation de l’électricité au Québec, cette recherche vient démontrer que les idées transnationales ont été tout aussi influentes. Tout au long du récit, on voit que la conjoncture politico-économique de refonte du libéralisme économique classique vers une version plus keynésienne de l’économie occidentale a été un stimulant de première importance pour la nationalisation de l’électricité au Québec. Dans le premier chapitre sont détaillées les nationalisations d’électricité de l’Ontario, de la Vallée du Tennessee et de la France, ainsi que les relations qu’elles ont eues entre elles et avec le Québec. Dans un second temps, il est démontré que l’étatisation de l’électricité en Ontario au début du XXe siècle et celle de la Vallée du Tennessee durant la crise économique des années 1930 ont été des incitatifs majeurs pour le projet menant à la nationalisation de la Montreal Light Heat & Power en 1944. Enfin, dans le troisième chapitre, ce sont les influences venant des nationalisations d’électricité étasunienne, ontarienne et française sur la nationalisation de l’ensemble des compagnies d’électricité québécoises de 1963 qui sont analysées.

Incidencia de la cooperación internacional para el desarrollo de las organizaciones internacionales en las políticas públicas de Nigeria. ¿Cooperación o injerencia política? una aproximación de la comisión para la energía de la ECOWAS. 2005 – 2011

La cooperación Internacional para el desarrollo ha jugado un papel determinante en las dinámicas de desarrollo de los países de África, sin embargo, las organizaciones internacionales que la promocionan tienen el riesgo de ser sesgadas por influencias de Estados que patrocinan la Cooperación Internacional, hecho que genera, irremediablemente, injerencia política; esto se puede ver reflejado en la ECOWAS y sus programas energéticos.

Calculo del valor en riesgo del futuro de energia e internacionalizacion del sector energetico en Colombia

El presente trabajo de grado busca definir cuál es el mejor método para determinar el valor en riesgo del contrato de futuro de energía eléctrica que se transa en Colombia, para cumplir con este objetivo se toma como referencia el marco histórico del VaR y de los futuros seguido de las características de la fijación de precios, la estructura del contrato, que políticas y métodos hay para cubrirse del riesgo y como se realiza en otros países, realizando algunos cálculos de los modelos más tradicionales del Var para luego incorporarlo al marco colombiano y al ente supervisor en este caso la Superintendencia Financiera de Colombia.. Además de revisar las diferentes teorías de internacionalización económicas, de proceso y redes aplicadas al sector energético en Colombia., evaluando su proceso, alcance y posibles mercados futuros.

Riesgo de accidentes biológicos en estudiantes de la salud: revisión de la literatura en los últimos 14 años.

Introducción: Todos los trabajadores del área de la salud están en riesgo de padecer un accidente biológico. No obstante los estudiantes de estas aéreas, pueden presentar más riesgo porque apenas están en formación y no tienen la práctica o experiencia suficiente. Existen varios artículos que han estudiado la incidencia y prevalencia de accidentes biológicos en los trabajadores del área de la salud, Sin embargo, sobre esta problemática de la población estudiantil del área de la salud, se encuentra menos literatura. Por lo tanto con esta revisión sistemática se busca analizar y actualizar este tema. Métodos: Se realizó una revisión de la literatura científica de artículos publicados en los últimos 14 años, en relación con la prevalencia de accidentes biológicos en estudiantes de medicina, odontología, enfermería y residentes del área de la salud a nivel mundial. Se llevó a cabo la búsqueda en la base de datos de Pubmed, encontrando un total de 100 artículos, escritos en inglés, francés, español o portugués. Resultados: Las prevalencias encontradas sobre accidentes biológicos en estudiantes fueron las siguientes: en países europeos a nivel de enfermería los valores oscilan entre 10.2 % a 32%, en medicina fueron del 16%-58.8%, y en odontología del 21 %. En países asiáticos, se encontró que en enfermería el porcentaje varía de 49%-96 %, en medicina van del 35% -68%, y en odontología varia de 68.a 75.4%. En Norte América, en medicina las cifras fluctúan alrededor del 11-72.7 % y en odontología giran alrededor del 19.1%. Finalmente respecto a Suramérica la prevalencia fue de 31.2 a 46.7% en medicina, y del 40% en enfermería. Conclusiones: Por lo anterior se pudo concluir que, la prevalencia de accidentes biológicos en los estudiantes del área de la salud es elevada y varía según el continente en el que se encuentren.

Eugenol modifies the excitability of rat sciatic nerve and superior cervical ganglion neurons

Eugenol is a phenylpropene obtained from the essential oils of plants such as clove and basil which has ample use in dentistry. Eugenol possesses analgesic effects that may be related to the inhibition of voltage-dependent Na(+) channels and/or to the activation of TRPV1 receptors or both. In the present study, electrophysiological parameters were taken from the compound action potentials of the isolated rat sciatic nerve and from neurons of the superior cervical ganglion (SCG) impaled with sharp microelectrodes under current-clamp conditions. In the isolated rat sciatic nerve, eugenol inhibited the compound action potential in a concentration-dependent manner. Action potentials recorded from SCG neurons were inhibited by eugenol with an IC(50) of 0.31 mM. At high concentrations (2 mM), during brief applications. eugenol caused significant action potential blockade while it did not interfere with the resting membrane potential or the membrane input resistance. Surprisingly, however, at low eugenol concentrations (0.6 mM), during long time applications, a reversible reduction (by about 50%) in the input membrane resistance was observed, suggesting the possible involvement of a secondary delayed effect of eugenol to reduce neuronal excitability. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

Responsabilidade social corporativa : a memória do Programa de Reassentamento dos Atingidos pela Barragem da Usina Hidrelétrica Luiz Gonzaga (ex-Itaparica)

No Brasil, água e energia têm uma forte e histórica nterdependência, de forma que a contribuição da energia hidráulica ao desenvolvimento econômico do País tem sido expressiva, seja no atendimento às diversas demandas da economia, ou da própria sociedade, melhorando o conforto das habitações e a qualidade de vida das pessoas. Também desempenha papel importante na integração e desenvolvimento de regiões distantes dos grandes centros urbanos e industriais. A década de 70 registrou um crescimento elevado da demanda por energia elétrica no Brasil; reflexo de políticas desenvolvimentistas de governos anteriores que promoveram o crescimento industrial do País atraindo e criando indústrias de uso alto intensivo da letricidade. No caso da região Nordeste, o crescimento econômico trouxe consigo o risco de um grave racionamento de energia. Para eliminar tal risco, o Estado por intermédio do Sistema Eletrobras realizou a construção de grandes usinas hidrelétricas interligando-as ao sistema nacional. Não há como negar que esta solução provocou um grande benefício para grande parte da população brasileira, mas trouxe, para uma parcela do povo brasileiro, um custo social bastante elevado. Essas pessoas ficaram então conhecidas como os “atingidos por barragens”. Para eles, a construção das barragens de usinas como Itaipu, Tucuruí, Sobradinho e Itaparica significou o deslocamento compulsório dos locais aonde viviam e tinham suas tradições e referência culturais e afetivas. Esta pesquisa objetiva resgatar a memória deste período de grandes obras, promessas de desenvolvimento e marcas deixadas em milhares de famílias brasileiras. O estudo em questão é também uma tentativa de mostrar como o Programa de Reassentamento de Itaparica, projeto conduzido pela Companhia Hidro Elétrica do São Francisco – CHESF foi o marco de uma nova dinâmica para tratamento das questões sociais envolvendo a reparação de danos causados aos atingidos por barragens e se constitui talvez, no primeiro caso de Responsabilidade Social Corporativa do setor elétrico brasileiro.

Uma técnica para modelagem de cenários consistentes na previsão da demanda por energia elétrica

As técnicas qualitativas disponiveis para a modelagem de cenários têm sido reconhecidas pela extrema limitação, evidenciada no principio das atividades do processo, como a fase inicial de concepção. As principais restrições têm sido: • inexistência de uma ferramenta que teste a consistência estrutural interna do modelo, ou pela utilização de relações econômicas com fundamentação teórica mas sem interface perfeita com o ambiente, ou pela adoção de variações binárias para testes de validação; • fixação "a priori" dos possíveis cenários, geralmente classificados sob três adjetivos - otimista, mais provável e pessimista - enviesados exatamente pelos atributos das pessoas que fornecem esta informação. o trabalho trata da utilização de uma ferramenta para a interação entre uma técnica que auxilia a geração de modelos, suportada pela lógica relacional com variações a quatro valores e expectativas fundamentadas no conhecimento do decisor acerca do mundo real. Tem em vista a construção de um sistema qualitativo de previsão exploratória, no qual os cenários são obtidos por procedimento essencialmente intuitivo e descritivos, para a demanda regional por eletricidade. Este tipo de abordagem - apresentada por J. Gershuny - visa principalmente ao fornecimento de suporte metodológico para a consistência dos cenários gerados qualitativamente. Desenvolvimento e estruturação do modelo são realizados em etapas, partindo-se de uma relação simples e prosseguindo com a inclusão de variáveis e efeitos que melhoram a explicação do modelo. o trabalho apresenta um conjunto de relações para a demanda regional de eletricidade nos principais setores de consumo residencial, comercial e industrial bem como os cenários resultantes das variações mais prováveis das suas componentes exógenas. Ao final conclui-se que esta técnica é útil em modelos que: • incluem variáveis sociais relevantes e de dificil mensuração; • acreditam na importância da consistência externa entre os resultados gerados pelo modelo e aqueles esperados para a tomada de decisões; • atribuem ao decisor a responsabilidade de compreender a fundamentação da estrutura conceitual do modelo. Adotado este procedimento, o autor aqui recomenda que o modelo seja validado através de um procedimento iterativo de ajustes com a participação do decisor. As técnicas quantitativas poderão ser adotadas em seguida, tendo o modelo como elemento de consistência.

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Pesquisa odontológica no Brasil: características da produção científica no início do século XXI

Dentistry, as a science and field of knowledge, has presented a substantial development in the last decades in the areas of research and education. The aim of this study was to evaluate the Brazilian scientific production in Dentistry, as from their methodological outlining, which characterizes the XXI Century. Five thousand two hundred and three study abstracts were evaluated, comprising works presented in the meetings of the Brazilian Society of Dentistry Research (SBPqO), during the period of 2001 to 2006. The main results identify that, as for the methodology used in the researches, there was a predominance of the studies of an individuate, interventionist and longitudinal nature; of the researches in the areas of Dentistry, Periodontology, Endodontics, Pedodontics and Collective Oral Health and experimental studies about clinical researches or with collective subjects. The inter and multidisciplinarity are pointed out in the outlining of this study, as the triad Education-Health-Research is discussed, so that they transcend in their fields of action, in the direction of the transdisciplinarity. It is concluded that, in the studied period, there was a reasonable and balanced production in Brazilian dental field

Stability and Local Toxicity Evaluation of a Liposomal Prilocaine Formulation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A (bio)ética e a Odontologia: os (des)caminhos de uma formação humana

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology