Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Implementação de produção enxuta em uma empresa de manutenção de equipamentos rotativos

This graduation work presents the implementation of the key concepts of lean thinking in a maintenance workshop of rotating equipment, analyzing all the administrative and workshop processes. The pursuit of quality and client satisfaction at lower costs has generated a lot of competition between organizations, which use the practices of lean manufacturing as tools for processes improvement, aiming to eliminate wastes, being this, the work objective. And, unlike a manufacturing system, where the product goes through certain stages until its conclusion, the workshop does not have a default sequence that is repeated routinely on all machines. Thus, it demonstrates a possibility of application of lean tools in a different way of the common used in the lean manufacturing

Estudo dos fatores de virulência e resistência à oxacilina em Staphylococcus spp. isolados de aspirado traqueal de pacientes em ventilação mecânica internados em UTI

Patients that are mechanically ventilated in ICUs are constantly exposed to different pathogens, which present multiantibiotic resistance. Among these microorganisms, is MRSA (Meticillin-Resistant Staphylococcus aureus) considered to be a therapeutic challenge due to its resistance to β-lactam antibiotics. Therefore, this study proposed to identify species of Staphylococcus spp. isolated from mechanically ventilated patients in ICU, the gene mecA detection and the genes of the enterotoxins A (sea), B (seb), C (sec-1) and D (sed) in samples of S. aureus, as well as the phenotypic resistance determination to oxacillin using the disc-diffusion method with discs of oxacillin and cefoxitin. The samples collection occurred during in a period of 19 months, obtaining samples from 232 patients. A percentage of 39% (70) of Gram-positive cocci were found; which 82,8% (58) were identified as Staphylococcus spp,. among these, 75,8% (44) corresponded to S. aureus species and 47,7% were identified as MRSA. It was found resistance to both drugs in 31,8% of the S. aureus samples, 16 (36,3%) had the gene sea and 11 (25%) had the sec-1 gene. Among the coagulase-negative staphylococci obtained, the species most found was S. epidermidis, corresponding to 43% (6). The results revealed that one of the most important etiologic agents of VAP amid the Gram-positive cocci is the species S. aureus, with special attention to MRSA. The presence of enterotoxins genes in S. aureus did not showed determinant role in VAP, but the presence of these superantigens can contribute worsening the patient’s prognosis, since they are associated with intense inflammatory response

Estudo do comportamento em fadiga de um tubo de aço microligado, grau API 5L X70

This work focuses on a study on the fatigue behavior of a microalloyed steel API 5L X70, used in pipes lines to transport oil and gas. These types of steels have excellent mechanical resistance values and ductility and therefore increased their study driven by increased demand for oil and especially natural gas, which consequently raises the need to build new pipelines to transport these products. The oil extraction units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 to 30 years in the marine environment, a hostile environment for high pressure, corrosion, low temperatures and the stresses caused by the movement of water and tides. For analysis, the S-N (stress versus number of cycles) curves were obtained from data collected from bodies-of-proof cylindrical longitudinal, transverse and that one removed from the weld area of the pipe, tested in accordance with ASTM E466. Tensile tests were performed for characterizing the mechanical properties of the samples and welded joints, concluded that the values meet the specifications of the standard API 5L. To characterize microstructural material, also metallographic analysis was made of regions of the base metal and the HAZ. The results of fatigue tests demonstrated a higher life for the specimens removed from the longitudinal direction the pipe, followed by those in the transverse direction and, finally, the welded joint. The origins of the fatigue cracks were determined by scanning electron microscopy (SEM)

Alocação ótima de equipamentos SVC e TCSC na rede de transmissão de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Instrumentos antigos para o ensino de física: o tubo de Newton e seu uso no passado

O objetivo deste estudo é buscar compreender aspectos do trabalho experimental no ensino de Física no Brasil no passado, focalizando um instrumento antigo - o tubo de Newton. Considerando que a partir da Reforma Francisco Campos, em 1931, houve uma expansão do ensino secundário brasileiro e um aumento da presença de disciplinas científicas no currículo desse curso, examinamos as recomendações oficiais para o ensino de Física de 1931até 1961, quando foi promulgada a primeira Lei de Diretrizes e Bases da Educação Nacional. Procuramos investigar como o uso do tubo de Newton aparece em livros didáticos de Física para a educação secundária, editados em nosso país, no período delimitado. Em nossas conclusões consideramos que o conhecimento histórico pode ajudar a compreender aspectos relevantes a respeito do papel da experimentação no ensino de Física em nossos dias.

Ergonomia e design de vestimentas ocupacionais no Brasil: foco em equipamentos de proteção individual no setor de petróleo e gás

Pós-graduação em Design - FAAC

Modelo distribuído aplicado à análise de evaporadores do tipo tubo aletado

Pós-graduação em Engenharia Mecânica - FEIS

Biosecurity in public and private office

Biosecurity is currently a concern for all health-related services, including dentistry, since infection control has a relevant importance. In dental practice, health-related occupations have contact with a great number of individuals who are potentially capable to transmit pathogens. This study comprised a descriptive evaluation of the universal precaution measures for infection control adopted by dental practitioners working at public and private offices in the city of Araçatuba, SP. Data collection was performed by a quiz with questions about individual and collective protection equipments. The results showed that the use of caps was reported by 55% of the professionals working at the public sector and 90% for the private sector. The use of masks and gloves was reported by all professionals surveyed; nevertheless, glove change between patients was not reported by 40% of professionals working at the public sector. There were more flaws in public offices as to the use of protective barriers, since except for the use of gloves, gowns and masks, the frequency of use of those barriers was smaller than at private offices.

Morfologia e histoquímica do tubo digestivo de Mapará Hypophthalmus marginatus

Pós-graduação em Aquicultura - FCAV

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Trauma traqueal associado à fratura mandibular: relato de caso

Introduction: The mandibular injuries account for about 20% to 50% of cases of facial fractures. Some consider the jaw the second most commonly fractured bone of the skull, and is the only mobile bone of the facial framework, which results in decreased stability compared to the trauma. When one takes into account the degree of airway obstruction in patients with facial fractures, the problem becomes much more serious since it is one of the most troubling complications of trauma. Objective: the relevance of the topic is aimed to report a case of a patient victim of mandibular fracture associated with trauma to the trachea. Case report: Case report: Patient 24 years old patient with tracheal trauma concomitant mandibular fracture surgically treated in conjunction with the thoracic surgeon. After 5 months postoperatively, the patient is in good condition general, no complaints. Final comments: This form is observed that the key to proper treatment of tracheal trauma associated with facial fractures is the knowledge of the type of injury, and an accurate diagnosis multidisciplinary.

Design universal e acessibilidade: análise ergonomica de equipamentos de ginástica em espaços públicos

In recent years the availability of equipment for exercise in public places increased demand on the principles of universal design, ergonomics and accessibility, since they are intended for use by many different users. This paper presents an analysis of ergonomic equipment and discusses the main problems observed, as well as projective presents parameters for the development of new products.

Problemas ergonômicos enfrentados por profissionais de enfermagem em ambientes hospitalares: aspectos da interface trabalhadores x equipamentos

The ergonomic design seeks to establish parameters to improve the interface between the technologies (products, systems and environments) and between man (users). Among the many factors involved, there are the activities performed in hospital settings, both by patients and by clinical staff. Accordingly, efforts have been demonstrated biomechanical with a leading occupational problem, especially regarding the transfer of patients.