Can tissue drug concentrations be monitored by microdialysis during or after isolated limb perfusion for melanoma treatment?

Isolated limb perfusion (ILP) with melphalan is used to treat recurrent melanoma. This study aimed to develop a microdialysis technique for melphalan tissue concentration measurement during ILP. The effects of melphalan concentration (50-600 mu g/ml), microdialysis flow rate (0.55-17.5 mu l/min), probe length (5-50 mm) and temperature (25-41.5 degrees C) on in vitro recovery were studied. In addition, in vivo recovery was measured in rat hindlimbs perfused with melphalan using 50 mm microdialysis probes implanted subcutaneously and into muscle. Both dialysate and tissue sample melphalan concentrations were determined by high performance liquid chromatography. The in vitro recovery of melphalan was not affected by melphalan concentration or temperature, but increased with probe length and decreased with flow rate. The melphalan concentrations in subcutaneous and muscle dialysates were not significantly different. A linear relationship was found between tissue dialysate concentrations and actual tissue concentrations of melphalan (r(2) = 0.97). Microdialysis is a potential method for tissue drug monitoring which may assist in the efficacious use of cytotoxics in human ILP. (C) 2000 Lippincott Williams & Wilkins.

Alcohol- and drug-use disorders in Australia: implications of the National Survey of Mental Health and Wellbeing

Objective: This study reports the prevalence and correlates of ICD-10 alcohol- and drug-use disorders in the National Survey of Mental Health and Wellbeing (NSMHWB) and discusses their implications for treatment. Method: The NSMHWB was a nationally representative household survey of 10 641 Australian adults that assessed participants for symptoms of the most prevalent ICD-10 and DSM-IV mental disorders, including alcohol- and drug-use disorders. Results: In the past 12 months 6.5% of Australian adults met criteria for an ICD-10 alcohol-use disorder and 2.2% had another ICD-10 drug-use disorder. Men were at higher risk than women of developing alcohol- and drug-use disorders and the prevalence of both disorders decreased with increasing age. There were high rates of comorbidity between alcohol- and other drug-use disorders and mental disorders and low rates of treatment seeking. Conclusions: Alcohol-use disorders are a major mental health and public health issue in Australia. Drug-use disorders are less common than alcohol-use disorders, but still affect a substantial minority of Australian adults. Treatment seeking among persons with alcohol- and other drug-use disorders is low. A range of public health strategies (including improved specialist treatment services) are needed to reduce the prevalence of these disorders.

Conformational selection of inhibitors and substrates by proteolytic enzymes: Implications for drug design and polypeptide processing

Inhibitors of proteolytic enzymes (proteases) are emerging as prospective treatments for diseases such as AIDS and viral infections, cancers, inflammatory disorders, and Alzheimer's disease. Generic approaches to the design of protease inhibitors are limited by the unpredictability of interactions between, and structural changes to, inhibitor and protease during binding. A computer analysis of superimposed crystal structures for 266 small molecule inhibitors bound to 48 proteases (16 aspartic, 17 serine, 8 cysteine, and 7 metallo) provides the first conclusive proof that inhibitors, including substrate analogues, commonly bind in an extended beta-strand conformation at the active sites of all these proteases. Representative superimposed structures are shown for (a) multiple inhibitors bound to a protease of each class, (b) single inhibitors each bound to multiple proteases, and (c) conformationally constrained inhibitors bound to proteases. Thus inhibitor/substrate conformation, rather than sequence/composition alone, influences protease recognition, and this has profound implications for inhibitor design. This conclusion is supported by NMR, CD, and binding studies for HIV-1 protease inhibitors/ substrates which, when preorganized in an extended conformation, have significantly higher protease affinity. Recognition is dependent upon conformational equilibria since helical and turn peptide conformations are not processed by proteases. Conformational selection explains the resistance of folded/structured regions of proteins to proteolytic degradation, the susceptibility of denatured proteins to processing, and the higher affinity of conformationally constrained 'extended' inhibitors/substrates for proteases. Other approaches to extended inhibitor conformations should similarly lead to high-affinity binding to a protease.

Challenge of reducing drug-related deaths

The public-health attention given to deaths caused by illicit drug use in general, and by drug overdose in particular, should be commensurate with their contribution to premature death. For too long these deaths have been regarded as an unavoidable hazard of illicit drug use, their neglect abetted by the implicit view that the lives of illicit drug users are less deserving of being saved than those of others. In its report published this week,1 the UK Advisory Council on the Misuse of Drugs (ACMD) has rejected these implicit assumptions. Its view is that “drug-related deaths can, will and must in the near future be radically reduced in number”. It points out that the effort that society expends on preventing premature deaths “should apply no less to drug misusers than it does to other classes of people”.1

Coupled experimental and thermodynamic modeling studies for metallurgical smelting and coal combustion slag systems

An extensive research program focused on the characterization of various metallurgical complex smelting and coal combustion slags is being undertaken. The research combines both experimental and thermodynamic modeling studies. The approach is illustrated by work on the PbO-ZnO-Al2O3-FeO-Fe2O3-CaO-SiO2 system. Experimental measurements of the liquidus and solidus have been undertaken under oxidizing and reducing conditions using equilibration, quenching, and electron probe X-ray microanalysis. The experimental program has been planned so as to obtain data for thermodynamic model development as well as for pseudo-ternary Liquidus diagrams that can be used directly by process operators. Thermodynamic modeling has been carried out using the computer system FACT, which contains thermodynamic databases with over 5000 compounds and evaluated solution models. The FACT package is used for the calculation of multiphase equilibria in multicomponent systems of industrial interest. A modified quasi-chemical solution model is used for the liquid slag phase. New optimizations have been carried out, which significantly improve the accuracy of the thermodynamic models for lead/zinc smelting and coal combustion processes. Examples of experimentally determined and calculated liquidus diagrams are presented. These examples provide information of direct relevance to various metallurgical smelting and coal combustion processes.

The effects of the Cannabis Expiation Notice System on the prevalence of cannabis use in South Australia: evidence from the National Drug Strategy Household Surveys 1985-95

This study sought to examine the impact of the Cannabis Expiation Notice (CEN) scheme on the prevalence of lifetime and weekly cannabis use in South Australia. Data from five National Drug Strategy Household Surveys between 1985 and 1995 were examined to test for differences in trends in self-reported: (1) lifetime cannabis use; and (2) current weekly cannabis use, after controlling for age and gender, between South Australia and the other states and territories. Between 1985 and 1995, rates of lifetime cannabis use increased in SA from 26% to 36%. There were also significant increases in Victoria (from 26% to 32%), Tasmania (from 21% to 33%) and New South Wales (from 26% to 33%). The increase in South Australia was significantly greater than the average increase throughout the rest of Australia, but the other Australian states differed in their rates of change. Victoria and Tasmania had similar rates of increase to South Australia; New South Wales, Queensland and Western Australia showed lower rates of increase; and the Northern Territory and the Australian Capital Territory had high rates that did not change during the period. There was no statistically significant difference between SA and the rest of Australia in the rate of increase in weekly cannabis use. While there was a greater increase in self- reported lifetime cannabis use in South Australia between 1985 and 1995 than in the average of the other Australian jurisdictions it is unlikely that this increase is due to the CEN system, because similar increases occurred in Tasmania and Victoria (where there was no change in the legal status of cannabis use), and there was no increase in the rate of weekly cannabis use in South Australia over the same period.

Structured modeling of recombinant protein production in batch and fed-batch culture of baculovirus-infected insect cells

The infection of insect cells with baculovirus was described in a mathematical model as a part of the structured dynamic model describing whole animal cell metabolism. The model presented here is capable of simulating cell population dynamics, the concentrations of extracellular and intracellular viral components, and the heterologous product titers. The model describes the whole processes of viral infection and the effect of the infection on the host cell metabolism. Dynamic simulation of the model in batch and fed-batch mode gave good agreement between model predictions and experimental data. Optimum conditions for insect cell culture and viral infection in batch and fed-batch culture were studied using the model.

Experimental methods for studying drug uptake in the head and brain

A number of techniques have been developed to study the disposition of drugs in the head and, in particular, the role of the blood-brain barrier (BBB) in drug uptake. The techniques can be divided into three groups: in-vitro, in-vivo and in-situ. The most suitable method depends on the purpose(s) and requirements of the particular study being conducted. In-vitro techniques involve the isolation of cerebral endothelial cells so that direct investigations of these cells can be carried out. The most recent preparations are able to maintain structural and functional characteristics of the BBB by simultaneously culturing endothelial cells with astrocytic cells,The main advantages of the in-vitro methods are the elimination of anaesthetics and surgery. In-vivo methods consist of a diverse range of techniques and include the traditional Brain Uptake Index and indicator diffusion methods, as well as microdialysis and positron emission tomography. In-vivo methods maintain the cells and vasculature of an organ in their normal physiological states and anatomical position within the animal. However, the shortcomings include renal acid hepatic elimination of solutes as well as the inability to control blood flow. In-situ techniques, including the perfused head, are more technically demanding. However, these models have the ability to vary the composition and flow rate of the artificial perfusate. This review is intended as a guide for selecting the most appropriate method for studying drug uptake in the brain.

Finite element modeling of fluid-rock interaction problems in pore-fluid saturated hydrothermal/sedimentary basins

In order to use the finite element method for solving fluid-rock interaction problems in pore-fluid saturated hydrothermal/sedimentary basins effectively and efficiently, we have presented, in this paper, the new concept and numerical algorithms to deal with the fundamental issues associated with the fluid-rock interaction problems. These fundamental issues are often overlooked by some purely numerical modelers. (1) Since the fluid-rock interaction problem involves heterogeneous chemical reactions between reactive aqueous chemical species in the pore-fluid and solid minerals in the rock masses, it is necessary to develop the new concept of the generalized concentration of a solid mineral, so that two types of reactive mass transport equations, namely, the conventional mass transport equation for the aqueous chemical species in the pore-fluid and the degenerated mass transport equation for the solid minerals in the rock mass, can be solved simultaneously in computation. (2) Since the reaction area between the pore-fluid and mineral surfaces is basically a function of the generalized concentration of the solid mineral, there is a definite need to appropriately consider the dependence of the dissolution rate of a dissolving mineral on its generalized concentration in the numerical analysis. (3) Considering the direct consequence of the porosity evolution with time in the transient analysis of fluid-rock interaction problems; we have proposed the term splitting algorithm and the concept of the equivalent source/sink terms in mass transport equations so that the problem of variable mesh Peclet number and Courant number has been successfully converted into the problem of constant mesh Peclet and Courant numbers. The numerical results from an application example have demonstrated the usefulness of the proposed concepts and the robustness of the proposed numerical algorithms in dealing with fluid-rock interaction problems in pore-fluid saturated hydrothermal/sedimentary basins. (C) 2001 Elsevier Science B.V. All rights reserved.

An L-system-based plant modeling language

Cpfg is a program for simulating and visualizing plant development, based on the theory of L-systems. A special-purpose programming language, used to specify plant models, is an essential feature of cpfg. We review postulates of L-system theory that have influenced the design of this language. We then present the main constructs of this language, and evaluate it from a user's perspective.

L-studio/cpfg: A software system for modeling plants

L-studio/cpfg is a plant modeling software system designed for Windows 95/98/NT platforms. Its key components are the L-system-based plant simulator cpfg and the modeling environment called L-studio. We overview version 1.0 of this system from the user's perspective.

An overview of diversion strategies for Australian drug-related offenders

This paper provides a descriptive overview of options for diversion of drug-related offenders from the criminal justice system. Drug-related offences include drug offences (for example, possession of a prohibited substance); offences that are directly linked to intoxication (for example, drink-driving or assault); and offences committed to support drug use (for example, theft). After an offence has been detected by police, multiple opportunities for diversion occur throughout the criminal justice process. (a) Pre-arrest: when an offence is first detected, prior to a charge being laid. This is known as police diversion and includes fines, warnings and cautions, sometimes with educational information or referral to assessment and treatment. (b) Pre-trial: when a charge is made but before the matter is heard at court. Examples are treatment as a condition of bail, conferencing and prosecutor discretion. (c) Pre-sentence: a delay of sentence while assessment and treatment are sought. (d) Post-sentence: as part of sentencing, for example suspended sentences, drug courts, noncustodial sentences and circle sentencing. (e) Pre-release: prior to release from a sentence, on parole. Issues for diversion programmes include net widening, the ethics of coercion to treatment, the needs of families and intersectoral collaboration. A framework for diversion is presented in which increasingly treatment-focused and coercive diversion strategies are used as offenders' criminal careers and drug problems increase.