968 resultados para Dependência angular
Resumo:
The Hamiltonian formulation of the teleparallel equivalent of general relativity is considered. Definitions of energy, momentum and angular momentum of the gravitational field arise from the integral form of the constraint equations of the theory. In particular, the gravitational energy-momentum is given by the integral of scalar densities over a three-dimensional spacelike hypersurface. The definition for the gravitational energy is investigated in the context of the Kerr black hole. In the evaluation of the energy contained within the external event horizon of the Kerr black hole, we obtain a value strikingly close to the irreducible mass of the latter. The gravitational angular momentum is evaluated for the gravitational field of a thin, slowly rotating mass shell. © 2002 The American Physical Society.
Resumo:
We present measurements of the linear polarization amplitudes and the strong relative phases that describe the flavor-untagged decays Bd0→J/ψK*0 and Bs0→J/ψ in the transversity basis. We also measure the mean lifetime τ̄s of the Bs0 mass eigenstates and the lifetime ratio τ̄s/τd. The analyses are based on approximately 2.8fb-1 of data recorded with the D0 detector. From our measurements of the angular parameters we conclude that there is no evidence for a deviation from flavor SU(3) symmetry for these decays and that the factorization assumption is not valid for the Bd0→J/ψK*0 decay. © 2009 The American Physical Society.
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
Summary In this work the structural dependence of plastic rotation capacity in RC beams is evaluated using the Finite Element Method. The objective is to achieve a better understanding of the non-linear behavior of reinforced concrete members and perform extensive parameter studies, using a rational model developed by Bigaj [1] to analyze the phenomenon of plastic rotation capacity in reinforced concrete members. It is assumed that only bending failure is relevant due to sufficient member resistance against shear and torsion. The paper begins with the physical and theoretical background of the phenomenon of plastic hinge development in RC structures. Special emphasis is laid on the issue of structural dependence of deformation capacity of plastic hinges in RC members. Member size dependence and influence of properties of construction materials were emphasized as well. The essential components of the Bigajs model for calculating the plastic rotation capacity are discussed. The behaviour of the plastic hinge is analysed taking into account the strain localisation in the damage zones of the hinge region. The Fictitious Crack Model (FCM) and the Compressive Damage Zone Model (CDZ) are adopted in a Fracture Mechanics approach to model the behaviour of concrete in tension and compression, respectively. The approach is implemented in FEMOOP, a FEM in-house solver under development, and applied to evaluate ductility in 2D beams. The models were generated with GiD, a pre-processor and post-processor developed by CIMNE, and analyzed with the capabilities implemented in FEMOOP. © Universitat Politècnica de Catalunya, Barcelona, España 2010.
Resumo:
This study aimed to identify the level of dependence in elderly inpatients when performing Basic Activities of Daily Living. This quantitative, cross-sectional, descriptive study was conducted in the Adult Ward of the Botucatu University Hospital Emergency Unit - UNESP, Brazil. Data was collected by means of interviews, observation, and individual medical chart consultation, to be analyzed via logistic regression using the statistical software package SAS for Windows, version 9.2. The sample consisted of 71 subjects with a mean age of 74.30 years. It was observed that 30.99% of the older individuals showed to be independent in performing the proposed activities; 22.53% were partly dependent; and 46.48% were fully dependent. Gerontology care must aim at maintaining functional conditions, thus promoting independence and preserving these individuals' dignity.
Resumo:
The effects of temperature on the rate of biological processes such as the germination are reported in several papers. The analysis of the thermal effect can be performed either from numerical indices or germination curves, which is usually presented as the accumulated percentage of germination versus time. Such curves can be fitted by empirical models and generally they offer a better description of the time-course of germination than single-value indices. On the other hand, in analyzing the germination curves, a question arises whether the model parameters have biological meaning. Thus, it is desirable that the model parameters both describe properly the germination curve and have biological meaning, which often does not occur. Considering the involvement of populations and percentages in germination assays, an analytical model has been widely used in the last two decades which is based on the concept of thermal time. This article discusses the conceptual basis and provides procedures for applying the thermal-time model in germination studies by using the probit regression method, both at infra and supra-optimal temperatures.
Resumo:
First measurements of dihadron correlations for charged particles are presented for central PbPb collisions at a nucleon-nucleon center-of-mass energy of 2.76TeV over a broad range in relative pseudorapidity (Δν) and the full range of relative azimuthal angle (Δø). The data were collected with the CMS detector, at the LHC. A broadening of the away-side (Δø y≈ π) azimuthal correlation is observed at all Δν, as compared to the measurements in pp collisions. Furthermore, long-range dihadron correlations in Δν are observed for particles with similar ø values. This phenomenon, also known as the \ridge, persists up to at least jΔνj = 4. For particles with transverse momenta (pT) of 2-4 GeV/c, the ridge is found to be most prominent when these particles are correlated with particles of pT = 2-6 GeV/c, and to be much reduced when paired with particles of pT = 10-12 GeV/c. Copyright CERN.
Resumo:
The angular leaf spot of dry bean caused by the fungus Phaeoisairopsis griseola is a very important disease on dry bean crops in Brazil. In propitious weather conditions, susceptible cultivars have significant losses due to this disease. In these conditions, fungicide usage is an important step for angular leaf spot management. Since the effects of this method of control on plant physiology are not known, this study had the following objectives: a) Verify the action of fungicide in physiological changes in dry beans (photosynthesis rate and stomatal conductivity); b) evaluate the efficacy of some fungicides for the control of angular leaf spot; and c) examine the effects of these fungicides on other agronomic parameters; weight of 100 grains, number of grains per pod and number of pods per plant. The dry bean cultivar used in this study was Perola. Four trials were conducted, two in a net greenhouse and two trials under field conditions. A spray of piraclostrobin, tebuconazol and tebuconazol+ trifloxistrobin increased photosynthesis rates, although stomatal conductivity was not changed. In addition, sprays of tebuconazol, piraclostrobin, metiram+piraclostrobin and azoxistrobin provided better levels of disease control and also higher weight of 100 grains, with the exception of azoxystrobin for this parameter.
Resumo:
We present a measurement of the average value of a new observable at hadron colliders that is sensitive to QCD dynamics and to the strong coupling constant, while being only weakly sensitive to parton distribution functions. The observable measures the angular correlations of jets and is defined as the number of neighboring jets above a given transverse momentum threshold which accompany a given jet within a given distance δR in the plane of rapidity and azimuthal angle. The ensemble average over all jets in an inclusive jet sample is measured and the results are presented as a function of transverse momentum of the inclusive jets, in different regions of δR and for different transverse momentum requirements for the neighboring jets. The measurement is based on a data set corresponding to an integrated luminosity of 0.7 fb -1 collected with the D0 detector at the Fermilab Tevatron Collider in pp- collisions at s=1.96 TeV. The results are well described by a perturbative QCD calculation in next-to-leading order in the strong coupling constant, corrected for non-perturbative effects. From these results, we extract the strong coupling and test the QCD predictions for its running over a range of momentum transfers of 50-400 GeV. © 2012 Elsevier B.V.
Resumo:
Results on two-particle angular correlations for charged particles emitted in pPb collisions at a nucleon-nucleon center-of-mass energy of 5.02 TeV are presented. The analysis uses two million collisions collected with the CMS detector at the LHC. The correlations are studied over a broad range of pseudorapidity, η, and full azimuth, φ, as a function of charged particle multiplicity and particle transverse momentum, pT. In high-multiplicity events, a long-range (2<|δη|<4), near-side (δφ≈0) structure emerges in the two-particle δη-δφ correlation functions. This is the first observation of such correlations in proton-nucleus collisions, resembling the ridge-like correlations seen in high-multiplicity pp collisions at s=7 TeV and in AA collisions over a broad range of center-of-mass energies. The correlation strength exhibits a pronounced maximum in the range of pT=1-1.5 GeV/c and an approximately linear increase with charged particle multiplicity for high-multiplicity events. These observations are qualitatively similar to those in pp collisions when selecting the same observed particle multiplicity, while the overall strength of the correlations is significantly larger in pPb collisions. © 2012 CERN.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Mecânica - FEG