Spatial and temporal dependencies of cross-orientation suppression in human vision.

A well-known property of orientation-tuned neurons in the visual cortex is that they are suppressed by the superposition of an orthogonal mask. This phenomenon has been explained in terms of physiological constraints (synaptic depression), engineering solutions for components with poor dynamic range (contrast normalization) and fundamental coding strategies for natural images (redundancy reduction). A common but often tacit assumption is that the suppressive process is equally potent at different spatial and temporal scales of analysis. To determine whether it is so, we measured psychophysical cross-orientation masking (XOM) functions for flickering horizontal Gabor stimuli over wide ranges of spatio-temporal frequency and contrast. We found that orthogonal masks raised contrast detection thresholds substantially at low spatial frequencies and high temporal frequencies (high speeds), and that small and unexpected levels of facilitation were evident elsewhere. The data were well fit by a functional model of contrast gain control, where (i) the weight of suppression increased with the ratio of temporal to spatial frequency and (ii) the weight of facilitatory modulation was the same for all conditions, but outcompeted by suppression at higher contrasts. These results (i) provide new constraints for models of primary visual cortex, (ii) associate XOM and facilitation with the transient magno- and sustained parvostreams, respectively, and (iii) reconcile earlier conflicting psychophysical reports on XOM.

Factors affecting human reliability in the chemical process industry

This research was concerned with identifying factors which may influence human reliability within chemical process plants - these factors are referred to as Performance Shaping Factors (PSFs). Following a period of familiarization within the industry, a number of case studies were undertaken covering a range of basic influencing factors. Plant records and site `lost time incident reports' were also used as supporting evidence for identifying and classifying PSFs. In parallel to the investigative research, the available literature appertaining to human reliability assessment and PSFs was considered in relation to the chemical process plan environment. As a direct result of this work, a PSF classification structure has been produced with an accompanying detailed listing. Phase two of the research considered the identification of important individual PSFs for specific situations. Based on the experience and data gained during phase one, it emerged that certain generic features of a task influenced PSF relevance. This led to the establishment of a finite set of generic task groups and response types. Similarly, certain PSFs influence some human errors more than others. The result was a set of error type key words, plus the identification and classification of error causes with their underlying error mechanisms. By linking all these aspects together, a comprehensive methodology has been forwarded as the basis of a computerized aid for system designers. To recapitulate, the major results of this research have been: One, the development of a comprehensive PSF listing specifically for the chemical process industries with a classification structure that facilitates future updates; and two, a model of identifying relevant SPFs and their order of priority. Future requirements are the evaluation of the PSF listing and the identification method. The latter must be considered both in terms of `useability' and its success as a design enhancer, in terms of an observable reduction in important human errors.

A study in Britain and France of the development of cross-cultural in-house sales training using distance learning.

The thesis is concerned with cross-cultural distance learning in two countries: Great Britain and France. Taking the example of in-house sales training, it argues that it is possible to develop courses for use in two or more countries of differing culture and language. Two courses were developed by the researcher. Both were essentially print-based distance-learning courses designed to help salespeople achieve a better understanding of their customers. One used a quantitative, the other qualitative approach. One considered the concept of the return on investment and the other, for which a video support was also developed, considered the analysis of a customer's needs. Part 1 of the thesis considers differences in the training context between France and Britain followed by a review of the learning process with reference to distance learning. Part 2 looks at the choice of training medium course design and evaluation and sets out the methodology adopted, including problems encountered in this type of fieldwork. Part 3 analyses the data and draws conclusions from the findings, before offering a series of guidelines for those concerned with the development of cross-cultural in-house training courses. The results of the field tests on the two courses were analysed in relation to the socio-cultural, educational and experiential background of the learners as well as their preferred learning styles. The thesis argues that it is possible to develop effective in-house sales training courses to be used in two cultures and identifies key considerations which need to be taken into account when carrying out this type of work.

Marital counselling: follow-up study of marriage guidance clients: perceptions of the agency, the process and outcomes. Available in 2 volumes.

This study is a consumer-survey conducted with former Marriage Guidance Council clients. The objectives were to identify and examine why they chose the agency, what their expectations and experiences were of marital counselling and whether anything was achieved. The material was derived from tape recorded interviews with 51 former M.G. clients (17 men and 34 women) from 42 marriages and with 21 counsellors; data from written material and a card-sort completed by the research sample; and the case record sheets of the research population (174 cases). The results from the written data of clients showed that 49% were satisfied with counselling, 25.5% were satisfied in some ways but not in others, and 25.5% were dissatisfied. Forty-six percent rated they had benefited from counselling, either a great deal or to some degree, 4% were neutral and 50% recorded they had not benefited. However the counsellors' assessments were more optimistic. It was also ascertained that 50% of the research sample eventually separated or divorced subsequent to counselling. A cross-check revealed that the majority who rated they were satisfied with counselling were those who remained married, whilst dissatisfied clients were the ones who unwillingly separated or divorced. The study then describes, discusses and assesses the experiences of clients in the light of these findings on a number of dimensions. From this it was possible to construct a summary profile of a "successful" client describing the features which would contribute to "success". Two key themes emerged from the data. (1) the discrepancy between clients expectations and the counselling offered, which included mis­ match over the aims and methods of counselling, and problem definition; and (2) the importance of the client/counsellor relationship. The various implications for the agency are then discussed which include recommendations on policy, the training of counsellors and further research.

The development of an expert system for the identification anodic coating process defects as a contribution to the dissemination of anodizing technology

Initially this thesis examines the various mechanisms by which technology is acquired within anodizing plants. In so doing the history of the evolution of anodizing technology is recorded, with particular reference to the growth of major markets and to the contribution of the marketing efforts of the aluminium industry. The business economics of various types of anodizing plants are analyzed. Consideration is also given to the impact of developments in anodizing technology on production economics and market growth. The economic costs associated with work rejected for process defects are considered. Recent changes in the industry have created conditions whereby information technology has a potentially important role to play in retaining existing knowledge. One such contribution is exemplified by the expert system which has been developed for the identification of anodizing process defects. Instead of using a "rule-based" expert system, a commercial neural networks program has been adapted for the task. The advantages of neural networks over 'rule-based' systems is that they are better suited to production problems, since the actual conditions prevailing when the defect was produced are often not known with certainty. In using the expert system, the user first identifies the process stage at which the defect probably occurred and is then directed to a file enabling the actual defects to be identified. After making this identification, the user can consult a database which gives a more detailed description of the defect, advises on remedial action and provides a bibliography of papers relating to the defect. The database uses a proprietary hypertext program, which also provides rapid cross-referencing to similar types of defect. Additionally, a graphics file can be accessed which (where appropriate) will display a graphic of the defect on screen. A total of 117 defects are included, together with 221 literature references, supplemented by 48 cross-reference hyperlinks. The main text of the thesis contains 179 literature references. (DX186565)

The factors affecting attitudes toward HSDPA service and intention to use:a cross-cultural comparison between Asia and Europe

HSDPA (High-Speed Downlink Packet Access) is a 3.5-generation asynchronous mobile communications service based on the third generation of W-CDMA. In Korea, it is mainly provided in through videophone service. Because of the diffusion of more powerful and diversified services, along with steep advances in mobile communications technology, consumers demand a wide range of choices. However, because of the variety of technologies, which tend to overflow the market regardless of consumer preferences, consumers feel increasingly confused. Therefore, we should not adopt strategies that focus only on developing new technology on the assumption that new technologies are next-generation projects. Instead, we should understand the process by which consumers accept new forms of technology and devise schemes to lower market entry barriers through strategies that enable developers to understand and provide what consumers really want.

Writing for success:mentoring as a pedagogical tool – a cross- institutional study

The prominent position given to academic writing across contemporary academia is reflected in the substantive literature and debate devoted to the subject over the past 30 years. However, the massification of higher education, manifested by a shift from elite to mass education, has brought the issue into the public arena, with much debate focusing on the need for ‘modern-day' students to be taught how to write academically (Bjork et al., 2003; Ganobcsik-Williams, 2006). Indeed, Russell (2003) argued that academic writing has become a global ‘problem' in Higher Education because it sits between two contradictory pressures (p.V). On one end of the university ‘experience' increasing numbers of students, many from non-traditional backgrounds, enter higher education bringing with them a range of communication abilities. At the other end, many graduates leave university to work in specialised industries where employers expect them to have high level writing skills (Ashton, 2007; Russell, 2003; Torrence et al., 1999). By drawing attention to the issues around peer mentoring within an academic writing setting in three different higher education Institutions, this paper makes an important contribution to current debates. Based upon a critical analysis of the emergent findings of an empirical study into the role of peer writing mentors in promoting student transition to higher education, the paper adopts an academic literacies approach to discuss the role of writing mentoring in promoting transition and retention by developing students' academic writing. Attention is drawn to the manner in which student expectations of writing mentoring actually align with mentoring practices - particularly in terms of the writing process and critical thinking. Other issues such as the approachability of writing mentors, the practicalities of accessing writing mentoring and the wider learning environment are also discussed.

Organizing innovation:complementarities between cross-functional teams

Cross-functional teams play a potentially important part in the innovation process enabling knowledge sharing, the development of trust and overcoming spatial and organizational barriers. Using a supermodularity approach, we focus on potential complementarities which may arise when cross-functional teams are used in different elements of the innovation process in UK and German manufacturing plants. Using optimal combinations of cross-functional teams in the innovation process increases innovation success in the UK by 29.5 per cent compared to 9.5 per cent in Germany. Patterns of complementarity are complex, however, but are more uniform in the UK than in Germany. The most uniform complementarities are between product design and development and production engineering, with little synergy evident between the more technical phases of the innovation process and the development of marketing strategy. In strategic terms, our results suggest the value of using cross-functional teams for the more technical elements of the innovation process but that the development of marketing strategy should remain the domain of specialists.

The role of HR in cross-border mergers and acquisitions:the case of Indian pharmaceutical firms

Mergers and acquisitions (M&) are increasingly becoming a strategy of choice for companies attempting to achieve and sustain competitive advantage. However, not all M&As are a success. In this paper, we examine the three main reasons highlighted in the literature as major causes of M&A failure (clashing corporate cultures, absence of clear communication, and employee involvement) in three Indian pharmaceutical companies, and we analyze the role played by the HR function in addressing them. Also, we discuss the importance of gaining the commitment and focus of the workforce during the acquisition process through employee involvement.

Moving on from nascent entrepreneurship:measuring cross-national differences in the transition to new business ownership

Nascent entrepreneurship and new business ownership are subsequent stages in the entrepreneurial process. We illustrate how information from the largest internationally harmonized database on entrepreneurship, the Global Entrepreneurship Monitor project, can be used to approximate the entrepreneurial process. We make a methodological contribution by computing the ratio of new business ownership to nascent entrepreneurship in a way that reflects the transition from nascent to new business ownership and provides cross-nationally comparable information on the efficiency of the entrepreneurial process for 48 countries. We report evidence for the validity of the transition ratio by benchmarking it against transition rates obtained from longitudinal studies and by correlating it with commonly used entrepreneurship indicators and macro-level economic indices. The transition ratio enables future cross-national research on the entrepreneurial process by providing a reliable and valid indicator for one key transition in this process. © 2012 Springer Science+Business Media New York.

Price discovery for Chinese shares cross-listed in multiple markets

In this article we study the relationship between security returns cross-listed on the A share market of China and the H share market at the Stock Exchange of Hong Kong (SEHK). Most of these securities are also cross-listed on other markets. An important feature of this article is that we focus on the multilateral relationships between all cross-listed markets rather than concentrating only on the bi-lateral relationship between A and Hong Kong H shares. Using the impulse response functions and the variance decompositions from a Vector Autoregressive (VAR) process we show that the returns to the A share market are almost exclusively determined by domestic factors. In contrast, we find that the H share market is influenced by both the A share market within China and foreign stock markets elsewhere in the world. Impulse response functions suggest that innovations to the A share market and the Hong Kong H share market are partly transmitted to each other and to stock markets outside China. We show that liquidity has an important role to play in determining the impact that the home market has on cross-listed variance decompositions. © 2012 Copyright Taylor and Francis Group, LLC.

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.

Process re-engineering for effective implementation of projects

Time, cost and quality are the prime objectives of any project. Unfortunately, today’s project management does not always ensure the realisation of these objectives. The main reasons of project non-achievement are changes in scope and design, changes in Government policies and regulations, unforeseen inflation, under-estimation and mis-estimation. An overall organisational approach with the application of appropriate management philosophies, tools and techniques can only solve the problem. The present study establishes a methodology for achieving success in implementing projects using a business process re-engineering (BPR) framework. Internal performance characteristics are introspected through condition diagnosis that identifies and prioritises areas of concern requiring attention. Process re-engineering emerges as a most critical area for immediate attention. Project process re-engineering is carried out by eliminating non-value added activities, taking up activities concurrently by applying information systems rigorously and applying risk management techniques throughout the project life cycle. The overall methodology is demonstrated through applications to cross country petroleum pipeline project organisation in an Indian scenario.

The unequal segmentation of public preparedness for mass evacuation:a cross-national perspective

This thesis is concerned with understanding how Emergency Management Agencies (EMAs) influence public preparedness for mass evacuation across seven countries. Due to the lack of cross-national research (Tierney et al., 2001), there is a lack of knowledge on EMAs perspectives and approaches to the governance of public preparedness. This thesis seeks to address this gap through cross-national research that explores and contributes towards understanding the governance of public preparedness. The research draws upon the risk communication (Wood et al., 2011; Tierney et al., 2001) social marketing (Marshall et al., 2007; Kotler and Lee, 2008; Ramaprasad, 2005), risk governance (Walker et al., 2010, 2013; Kuhlicke et al., 2011; IRGC, 2005, 2007; Renn et al., 2011; Klinke and Renn, 2012), risk society (Beck, 1992, 1999, 2002) and governmentality (Foucault, 1978, 2003, 2009) literature to explain this governance and how EMAs responsibilize the public for their preparedness. EMAs from seven countries (Belgium, Denmark, Germany, Iceland, Japan, Sweden, the United Kingdom) explain how they prepare their public for mass evacuation in response to different types of risk. A cross-national (Hantrais, 1999) interpretive research approach, using qualitative methods including semi-structured interviews, documents and observation, was used to collect data. The data analysis process (Miles and Huberman, 1999) identified how the concepts of risk, knowledge and responsibility are critical for theorising how EMAs influence public preparedness for mass evacuation. The key findings grounded in these concepts include: - Theoretically, risk is multi-functional in the governance of public preparedness. It regulates behaviour, enables surveillance and acts as a technique of exclusion. - EMAs knowledge and how this influenced their assessment of risk, together with how they share the responsibility for public preparedness across institutions and the public, are key to the governance of public preparedness for mass evacuation. This resulted in a form of public segmentation common to all countries, whereby the public were prepared unequally.  - EMAs use their prior knowledge and assessments of risk to target public preparedness in response to particular known hazards. However, this strategy places the non-targeted public at greater risk in relation to unknown hazards, such as a man-made disaster. - A cross-national conceptual framework of four distinctive governance practices (exclusionary, informing, involving and influencing) are utilised to influence public preparedness. - The uncertainty associated with particular types of risk limits the application of social marketing as a strategy for influencing the public to take responsibility and can potentially increase the risk to the public.

Cross-institutional development of an online open course for educators:confronting current challenges and imagining future possibilities

The Global Dimensions in Higher Education module is a fully online open course for educators, jointly developed by three UK universities through a process of consultation and inquiry involving colleagues within the global education sector. The purpose of the module is two-fold. Firstly, to engage academics within and beyond the partner institutions in a critical exploration of transnational and global issues within higher education. Secondly, to provide the project partners with an opportunity to understand and address the challenges of jointly developing and delivering an online course that is to be offered both openly as well as integrated within credit-bearing and continued professional development provision for academics in the partner institutions. This short paper describes progress to date in developing the Global Dimensions in Higher Education module, our current activity focused on validating and implementing the module, and lessons learned to be considered for the collaborative development of open online courses.