994 resultados para Crop yield forecasting


Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work was developed with the objective of evaluating the use of trinexapac-ethyl doses (0, 75, 150, 225 and 300 g of the a.i. ha -1) and application times (active tillering, between active tillering and floral differentiation and at floral differentiation) in upland rice crop development and yield. The experiment was carried out in Selvíria-MS, during the agricultural year of 2006/07. Application of 150 g ha -1 of trinexapac-ethyl in Primavera rice cultivar at panicle initiation differentiation reduces plants height, 0.40 m on average comparing to other times, with lodging absence. Trinexapac-ethyl promotes lange number of abnormal grains, reduction of grain yields in doses above 150 g ha -1, when applied in panicle initiation differentiation stadium. Application of 150 g ha -1 of trinexapac-ethyl at any time does not interfere in crop yield.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

In order to calculate the daily stress degree of a bean crop submitted to four water regime applications, cover crop and air daily measurements temperatures were accomplished by using a hand-held infrared thermometer. The treatments did not present crop water stress except the control (without irrigation). The highest yield was obtained by the treatment that received less irrigation frequency, and among the treatments that had the same number of irrigation. The largest yield was obtained with the one that received larger amount of applied water. The largest irrigation frequency did not result in larger productivity. The methodologies used for the irrigation planning were efficient for the replacement of soil water. The daily stress degree index was effective in determining crop water stress; and it was reliable presenting negative values in good water soil condition.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The objective of this work was to study spatial variability of some chemical soil attributes and lettuce production (total shoot fresh matter mass - MF; commercial shoot fresh matter mass - MFC; commercial shoot dry matter mass - MCS; and head commercial diameter - DCC) offering subsidies to the protected environment mapping in nutrients management areas in lettuce culture aiming for a higher productivity with application of fertilizers. The experiment was conducted in a protective environment (greenhouse) with lettuce irrigated by drip irrigation and sampling grid with 152 points. The special dependence analysis, determined by the variogram, was obtained with the aid of the GS+ Program. Considering the need for crop nutrients through the map obtained for element P (phosphorus) it was possible to establish two distinct areas for the application of this element in plantation fertilization. Through the lettuce yield maps obtained with MFC and DCC attributes was difficult to establish distinct areas for its management with data observed in only one crop cycle. Krigagem has proved useful for mapping the attributes studied.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Soil is an essential resource for life and its properties are susceptible to be modified by tillage systems. The impact of management practices on soil functions can be assessed through a soil quality index. It is interesting to assess soil quality in different soil types. Therefore, the aim of this study was to determine the soil quality index of a Paleudult under different management conditions and sunflower culture. The experiment was carried out in Botucatu (SP, Brazil), in an 11-year non-tilled area used for growing soybean and maize during summer and black oat or triticale in winter. Four management systems were considered: no-tillage with a hoe planter (NTh), no-tillage with a double-disk planter (NTd), reduced tillage (RT) and conventional tillage (CT). Soil samples were taken from the planting lines at harvest time. To determine the soil quality indices, following the methodology proposed by Karlen and Stott (1994), three main soil functions were assessed: soil capacity for root development, water storage capacity of the soil and nutrient supply capacity of the soil. The studied Paleudult was considered a soil with good quality under all the observed management systems. However, the soil quality indices varied between treatments being 0.64, 0.68, 0.86 and 0.79 under NTh, NTd, RT and CT, respectively. Physical attributes such as resistance to penetration and macroporosity increased the soil quality index in RT and CT compared to NTh and NTd. The soil quality indices obtained suggested that the evaluated soil is adequate for sunflower production under our study conditions. In view of the SQI values, RT is the most suitable management for this site since it preserves soil quality and provides an acceptable sunflower yield. © 2011 Elsevier B.V.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fertirrigation with phosphoric acid has been considered as an option to avoid drips from clogging. In some cases, this acid cause soil acidification and it can be substituted bypotassium hydroxide. This study had the objective of evaluating the effects of different phosphoric acid and potassium hydroxide doses, applied via fertirrigation, on soil fertility, plant nutrition and lettuce yield, compared to the conventional fertilization system. The experiment was carried out in greenhouse, in the College of Agricultural Sciences, FCA/UNESP, Botucatu-SP-Brazil. The experimental design was the completely randomized block, with 6 treatments and 4 replications. Treatments consisted of the combinations of doses (25% and 50% of the recommended complete dose for the lettuce) and application ofcomplete dose (100%) of phosphorus (P) and potassium (K) applied via fertirrigation, and a control (conventional fertilization system). The results showed that P and K availability in soil and nutrient concentration in plants were affected by treatments. Low phosphorus and potassium doses, applied via fertirrigation, were not efficient for the appropriate development of lettuce plants. The results showed that agronomic characteristics and commercial lettuce were affected by doses and application systems, especially the treatment with application of P and K full dose fertirrigation.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The spatial variability of several soil attributes (bulk density, penetration resistance, water content, organic matter content and pH) as well as soybean yield have been assessed during the 2007/08 growing season, in Selviria (MS) in a Hapludox (Typic Acrustox), under no tillage. The objectives were to assess the spatial variability of soil and plant parameters at the small plot scale and to select the best soil attribute explaining most the variability of agricultural productivity. Soil and plant were sampled on a grid with 121 points within a plot of 25,600 m 2 in area and slope of 0.025 mm -1 slope. Medium and low coefficients of variation were obtained for most of the studied soil attributes as expected, due to the homogenizing effect of the no-till system on the soil physical environment. From the standpoint of linear regression and spatial pattern of variability, productivity of soybeans could be explained according to the hydrogen potential (pH). Results are discussed taken into account that the soybean crop in no-tillage is widely used in crop-livestock integration on the national scene.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The experiment was conducted in a greenhouse from May 1 to July 31, 2008, in Areia county, Paraiba State, PB, Brazil, in order to evaluate the effects of irrigation water salinity on initial growth of the passionfruit seedlings in non-saline substrate with and without bovine biofertilizer. The treatments were distributed in a completely randomized design, with three replications and twelve plants per plots, in a factorial arrangement 5 × 2 × 2, corresponding the former to the levels of salinity in the irrigation water: 0.5; 1.0; 2.0; 3.0 and 4.0 dS m-1, in soils with and without bovine biofertilizer applied at two moments (25 and 65 days after seedling emergence). The growth of the seedlings and the soil electrical conductivity were evaluated at the end of the experiment. The biofertilizer was diluted in a low saline water at a 1:1 ratio and was applied once two days before sowing, corresponding to 10% of the substrates volume. The increase in water salinity inhibited the growth in height of plants, leaf area and root length, but always to a lesser extent in the treatments with bovine biofertilizer. The increase in electrical conductivity of the irrigation water elevated the soil salinity, independently of the addition of biofertilizer.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The cotton crop yield is directly associated with the efficient control of pests. This work evaluated the relationship of different densities of A. argillacea per plant at different cotton plant ages with seed germination of four cotton cultivars: IAC 25, Delta Opal, Fibermax 993, and Fibermax 966. A randomized block design was set up in 4x3 factorial with four replications. Densities of larvae per plant (0, 2, 4, and 6 larvae) was the major factor while plant ages (30, 60 and 90 days after emergency - DAE) the second level factor. Larvae were released on plants with 30, 60 and 90 DAE. The seeds were manually picked, for the evaluation of the germination in the laboratory using the seed viability through sand emergency method. The results showed that studied cotton cultivars differently to defoliate caused by A. argillacea larvae; the cotton development stage had more influence in the physiologic quality of the seeds than the defoliation; the germination is negatively affected when the defoliation took place at 60 DAE.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

There is much information on the adequate soil water matrix potential for returning irrigation in conventional soil tillage systems; however there is not enough information on the best soil water matrix potential for no-tillage production systems. This work aimed to study the effect of five irrigation levels on yield, soluble solids, and fruit acidity of the Hypeel tomato, cultivated for industrial processing and cropped on no-tillage system in Yellow Latosol. The experiment was carried out on a randomized block design with five treatments and four replications. The treatments consisted in different soil water matrix potentials for returning irrigation (m at 13cm of soil depth): -15, -30, -45, -60 and -75 kPa. The results obtained showed that the soil water matrix potential of -28.5 kPa resulted in maximum yields for tomato crop; whereas the value of -50.8 kPa resulted in the maximum fruit soluble solids concentration.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Predicting and mapping productivity areas allows crop producers to improve their planning of agricultural activities. The primary aims of this work were the identification and mapping of specific management areas allowing coffee bean quality to be predicted from soil attributes and their relationships to relief. The study area was located in the Southeast of the Minas Gerais state, Brazil. A grid containing a total of 145 uniformly spaced nodes 50 m apart was established over an area of 31. 7 ha from which samples were collected at depths of 0. 00-0. 20 m in order to determine physical and chemical attributes of the soil. These data were analysed in conjunction with plant attributes including production, proportion of beans retained by different sieves and drink quality. The results of principal component analysis (PCA) in combination with geostatistical data showed the attributes clay content and available iron to be the best choices for identifying four crop production environments. Environment A, which exhibited high clay and available iron contents, and low pH and base saturation, was that providing the highest yield (30. 4l ha-1) and best coffee beverage quality (61 sacks ha-1). Based on the results, we believe that multivariate analysis, geostatistics and the soil-relief relationships contained in the digital elevation model (DEM) can be effectively used in combination for the hybrid mapping of areas of varying suitability for coffee production. © 2012 Springer Science+Business Media New York.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A better understanding of the differential growth of upland rice (Oryza sativa L.) cultivars with increasing soil S availability could help improve rice yield under upland conditions. The objective of this study was to evaluate root and shoot growth and nutrition of upland traditional and modern rice cultivars as affected by S availability. The experimental design was completely randomized in a 3 (rates of S) × 3 (cultivars) factorial with four replications. Low availability of S in the soil reduces root and shoot development and the efficiency of N, P, and S uptake, as well as the concentration and content of these nutrients in rice cultivars. At 0 mg dm-3 of S, rice cultivars prioritize root growth over shoots, and the traditional cultivar does so with greater intensity. Our results suggested that more development of traditional cultivars under low S availability facilitates its adaptation in soils under this condition. On the other hand, the intermediate and modern cultivars are more responsive to S fertilization. Moreover, S fertilization allows significant increases in upland rice growth and must be considered in cropping systems aiming for high yields. © Soil Science Society of America.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Upland rice (Oryza sativa L.) cultivation has been increasing in importance in Asia while water availability for irrigation has been decreasing because of rapid growth in industry and urban centers. Therefore, the development of technologies that increase upland rice yields under aerobic conditions, thereby saving water, would be an effective strategy to avoid a decrease in global rice grain production. The use of the no-tillage system (NTS) and cover crops that maintain soil moisture would prove advantageous in the move toward sustainable agriculture. However, upland rice develops better in plowed soil, and it has been reported that this crop does not perform well under the NTS. Therefore, the aim of this study was to investigate the effect of cover crops on upland rice grain yield and yield components sowed in a NTS. A field experiment was conducted during two growing seasons (2008-2009 and 2009-2010), and treatments consisted of growing rice under five cover crops in a NTS and two control treatments under the conventional tillage system (plowing once and disking twice). Treatments were carried out in a randomized block design with three replications. Our findings are as follows: On average, Brachiaria brizantha (12.32Mgha-1), Brachiaria ruziziensis (11.08Mgha-1) and Panicum maximum (11.62Mgha-1) had outstanding biomass production; however, these grasses provided the worst upland rice yields (2.30, 2.04, and 2.67Mgha-1, respectively) and are not recommended as cover crops before upland rice. Millet and fallow exhibited the fastest straw degradation (half-lives of 52 and 54 days, respectively), and millet exhibited the fastest nitrogen release (N half-life of 28 days). The use of a NTS was promising when millet was used as a cover crop; this allowed the highest upland rice yield (3.94Mgha-1) and did not statistically differ from plowed fallow (3.52Mgha-1). © 2012 Elsevier B.V.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Considering the importance of nitrogen management and its biological fixation with diazotrophic bacteria, this study was carried out aiming to evaluate the agronomic performance of maize, in response to seed inoculation with Azospirillum brasilense and nitrogen application in side-dressing and leaf. The experiment was conducted in Selvíria, Mato Grosso of Sul State, Brazil, during the growing season 2010/2011, on a clayey Rhodic Haplustox (20° 20' S and 51° 24' W, with altitude of 340 m). Sixteen treatments were established with four replications, in randomized blocks with the combination of the factors A. brasilense (with and without inoculante), nitrogen rate (0 and 90 kg ha-1, in V5 growth stage) and urea leaf application (0, 4, 8 and 12%: application in V5 and V8 growth stage). The maize hybrid used was the DKB 390 YG®, sowed in the row spacing of 0.9 m. Parameters measured were productive and morphological components of culture and crop yield. Increase in maize yield by seed inoculation with A. brasilense was observed. The application of 90 kg ha -1 of nitrogen in side-dressing provided higher chlorophyll leaf index, stalk diameter and prolificacy, however, the yield not was increased. The application of urea leaf did not agronomic efficiency and, therefore, should not be used as the unique form of supply and alternative to nitrogen addition to crop.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Common bean is an important crop in Brazil primarily because of its nutritional characteristics. Some agronomic practices, such as weed management, are fundamental to cultivation, as a means of obtaining a high crop yield. However, some studies have shown that weed management may alter the function of the cultivar cycle. Thus, this study aimed at determining the optimal phenological stage in early-maturing common bean cultivars to perform the weed control without providing reductions in yield and seed quality. The experimental design was randomized blocks with 20 treatments and four replications, in a 2×2×5 (cultivars × types of weed control × periods of weed control) factorial scheme. The periods of weed control for both cultivars (Carioca Precoce and IPR-Colibri) consisted of full cycle weeded (control), weed control at the V4-3 stage (first three nodes on the main stem with trifoliate leaves), at the R5 stage (beginning of bloom) and at the R8 stage (appearance of pods) and full cycle unweeded (no weed control). The types of weed control used were chemical (fluazifop-p-butyl + fomesafen) and mechanical (hoe). The Carioca Precoce cultivar demonstrated higher agronomic performance and yield than the IPR-Colibri cultivar, although the IPR-Colibri seeds had a higher vigor. The type of weed control (chemical or mechanical) did not affect the agronomic characteristics, yield and seed physiological potential of the cultivars. The ideal period for weed control in early-maturing common bean cultivars to obtain a higher yield and seed physiological potential was observed at the V4-3 phenological stage.