Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

Spatial neighborhood matrix computation: Inverse distance weighted versus binary contiguity

Paper presented at Geo-Spatial Crossroad GI_Forum, Salzburg, Austria.

Matrix fractional systems

This paper addresses the matrix representation of dynamical systems in the perspective of fractional calculus. Fractional elements and fractional systems are interpreted under the light of the classical Cole–Cole, Davidson–Cole, and Havriliak–Negami heuristic models. Numerical simulations for an electrical circuit enlighten the results for matrix based models and high fractional orders. The conclusions clarify the distinction between fractional elements and fractional systems.

The Risks of Self - Medication: Case Report of Familial Misuse of AM3 (Immunoferon®)

Over the last decades extended medical knowledge has been an important health care benefit in terms of disease prevention and management. However, probably with no exception, most pharmaceutical products are not devoid of adverse consequences. Immunomodulators are commonly considered a “benign” drug whose advantages bypass consequences. The immunomodulator AM3 (Immunoferon®) is a clinically used, orally administered compound whose active principle is stabilised in an inorganic matrix of calcium. We report the misuse of AM3 in three members of a family; father and two children. The drug was prescribed to the father who subsequently administered it to the children without seeking medical advice. Two months later, all subjects developed abdominal and/or flank colicky pain. Hypercalciuria was diagnosed in the children with different degrees of severity. It is likely that the calcium content of the inorganic matrix played an important role in the onset of symptoms. No adverse side effects related to the inorganic matrix of calcium of immunoferon® have been documented so far. This family case report calls attention to the risks of self -medication in a susceptible family. Paediatric patients are vulnerable as they rely on adults for the supply of medications. Concerning the use of drugs in family, especially nonprescription drugs, the quality of health care provided to the children depends on the health literacy of their parents.

Influence of Compound 16.842 on hookworm infections

Compound 16.842 was tried with three different groups of patients in order to evaluate its tolerancy, and efficacy as well, with a view of using the drug in mass campaigns against hookworm. Group I, used for a preliminary trial, consisted of 38 patients attending an out-patient clinic, and living either in the out-skirts or in the various urban areas of the city of Rio de Janeiro, including some inmates of an orphanage. Group II, a field trial, was carried out in two farms, where the drug was administered both to the positive cases (124) and to the rest of the population (nearly 90%). Group III, a field trial was also carried out in a small town where nearly 40% of the total population was treated with the Compound. Tolerability was considered rather satisfactory, mainly among the patients receiving two single doses (50-150mg), according to the age, 4 - 6 weeks apart). These results suggest that 2-4 courses of therapy within a shorter span of time should be the ideal for a mass treatment campaign. Efficacy varied from 26.6% to 76.2% parasitological cure in the various groups, with a wide range of variation also in the percent of mean reduction of eggs for hookworm. The drug showed also some effect against Ascaris lumbricoides giving cure rates between 10,5% and 35.7% in the various groups, with a percentage reduction in mean egg counts of 27% to 83.3% according to the various groups. It was concluded that Compound 16.842 possesses a marked effect on hookworm and a mild effect on A. lumbricoides. The findings indicate the need for more accurate studies to determine the most efficient schedules of treatment and the real value of the drug, as compared to other antihelminthics against the two parasites under study.

Experimental chemotherapy of Schistosomiasis III: laboratory and clinical trials with trichlorphone, an organophosphorus compound

Oogram studies have been carried out on mice, hamsters, and Cebus morikeys experimentally infected with Schistosoma mansoni and treated with trichlorphone (0,0-dimethyl 1-hydroxy-2, 2, 2-trichloroethylphosphonate). In mice, despite a slight hepatic shift of schistosomes, all animais presented oogram changes when dosed, per os, at the schedules of 200, and 100 mg/kg/day × 7. In hamsters, antischistosomal activity could be detected only at toxic leveis. In monkeys, trichlorphone showed insignificant action even after oral administration of 30 mg/kg/day for 10 consecutive days. In 5 volunteers, a sharp drop in cholinesterase plasma level was observed 24 hours after a single oral dose of 7.5 mg/kg. However, cholinesterase levels returned to the initial values within a period of 11 to 27 days. Trichlorphone was then administered to 12 schistosome patients (7.5 mg/kg/day, every fort- night, × 5). One month after therapy, interruption of egg laying was observed in 6 patients. Late parasitological control showed that all treated patients continued to pass viable S. mansoni eggs with their stools.

Bone Histomorphometry Revisited

Bone histomorphometry is defined as a quantitative evaluation of bone micro architecture, remodelling and metabolism. Bone metabolic assessment is based on a dynamic process, which provides data on bone matrix formation rate by incorporating a tetracycline compound. In the static evaluation, samples are stained and a semi-automatic technique is applied in order to obtain bone microarchitectural parameters such as trabecular area, perimeter and width. These parameters are in 2D, but they can be extrapolated into 3D, applying a stereological formula. Histomorphometry can be applied to different areas; however, in recent decades it has been a relevant tool in monitoring the effect of drug administration in bone. The main challenge for the future will be the development of noninvasive methods that can give similar information. In the herein review paper we will discuss the general principles and main applications of bone histomorphometry.

Development of mixed matrix membranes with metal - organic framework and ionic liquids for biogas upgrading

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

The additive effects in matrix dispersed liquid crystals

Dissertation presented at Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa to obtain the degree of Master in Chemical and Biochemical Engineering

Microbial contribution to biofuels production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Numerical modelling of compound channel flow

Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/64337/2009 ; projects PTDC/ECM/70652/2006, PTDC/ECM/117660/2010 and RECI/ECM-HID/0371/2012

Produtos têxteis inteligentes incorporando filamentos compósitos com nanotubos de carbono

Programa Doutoral em Engenharia Têxtil.

Effect of polymeric matrix on morphology and photoelectric properties of polymer-quantum dots nanocomposites

Recently, CdTe semiconductor quantum dots (QDs) have attracted great interest due to their unique properties [1]. Their dispersion into polymeric matrices would be very for several optoelectronics applications. Despite its importance, there has been relatively little work done on charge transport in the QD polymeric films [2], which is mainly affected by their structural and morphological properties. In the present work, polymer-quantum dot nanocomposites films based on optically transparent polymers in the visible spectral range and CdTe QDs with controlled particle size and emission wavelength, were prepared via solvent casting. Photoluminescent (PL) measurements indicate different emission intensity of the nanocomposites. A blue shift of the emission peak compared to that of QDs in solution occurred, which is attributed to the QDs environment changes. The morphological and structural properties of the CdTe nanocomposites were evaluated. Since better QDs dispersion was achieved, PMMA seemed to be the most promising matrix. Electrical properties measurements indicate an ohmic behavior.

Thin films composed of gold nanoparticles dispersed in a dielectric matrix: the influence of the host matrix on the optical and mechanical responses

Gold nanoparticles were dispersed in two different dielectric matrices, TiO2 and Al2O3, using magnetron sputtering and a post-deposition annealing treatment. The main goal of the present work was to study how the two different host dielectric matrices, and the resulting microstructure evolution (including both the nanoparticles and the host matrix itself) promoted by thermal annealing, influenced the physical properties of the films. In particular, the structure and morphology of the nanocomposites were correlated with the optical response of the thin films, namely their localized surface plasmon resonance (LSPR) characteristics. Furthermore, and in order to scan the future application of the two thin film system in different types of sensors (namely biological ones), their functional behaviour (hardness and Young's modulus change) was also evaluated. Despite the similar Au concentrations in both matrices (~ 11 at.%), very different microstructural features were observed, which were found to depend strongly on the annealing temperature. The main structural differences included: (i) the early crystallization of the TiO2 host matrix, while the Al2O3 one remained amorphous up to 800 °C; (ii) different grain size evolution behaviours with the annealing temperature, namely an almost linear increase for the Au:TiO2 system (from 3 to 11 nm), and the approximately constant values observed in the Au:Al2O3 system (4–5 nm). The results from the nanoparticle size distributions were also found to be quite sensitive to the surrounding matrix, suggesting different mechanisms for the nanoparticle growth (particle migration and coalescence dominating in TiO2 and Ostwald ripening in Al2O3). These different clustering behaviours induced different transmittance-LSPR responses and a good mechanical stability, which opens the possibility for future use of these nanocomposite thin film systems in some envisaged applications (e.g. LSPR-biosensors).

Development of hyaluronic acid, dextrin and extracellular matrix hydrogels for cell expansion

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)