Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Use of Sludge as Ceramic Materials

Nowadays, with increase amounts of sludge derived from the treatment of domestic sewage put pressure into research on systems for the adequate use of these materials. The aim of the present work is to study the use of sludge ash, from sintering and calcinated process, as a raw material for the ceramic industry. Using the sewage sludge ashes as ceramic raw material there will be no contamination of soil and underground water. Metals and toxic compounds like Al, Fe, Ba, Cr, Cu, Mn and Zn oxides were analyzed and characterized by X-ray fluorescence (XRF), scanning electron microscopy (SEM) and plasma emission spectroscopy (ICP-OES). The leached material was chemically analyzed where the integration of oxides into the ceramic matrix of sludge ash was observed. Residual decomposition was analyzed by TG, DTG and DTA curves.

Cultivo de Ankistrodesmus gracilis (Reisch) Korsikov (Chlorophyta) em laboratório utilizando meio CHU12 e de macrófita com NPK

Two different culture media, namely CHU12 and inorganic fertilizer NPK (20-5-20) associated with macrophyte (Eichhornia crassipes) extract, were used to evaluate the development of A. gracilis. Growth rate, development, nutritional value and medium water quality were analyzed. A. gracilis in macrophyte+NPK medium had mean cell density (333x10(5) cells/mL) higher than medium CHU12 (302x10(5) cells/mL). Protein rate (12.52% PS), dry weight (397x10(7) pg/cell) and ashes (4.08x10(7) pg/cell) in A. gracilis was higher (p<0.05) than medium macrophyte+NPK. on the other hand, lipids, carbohydrates and fibers had the same rate (p>0.05) in both media. When hydrological variables in the culture medium of A. gracilis are taken into account, dissolved oxygen and free CO2 alone failed to have any significant difference (p>0.05) between the media employed. A. gracilis in the macrophyte+NPK medium had the same nutritional rate as the commercial medium CHU12, with excellent results for alga growth. Macrophyte medium may be used for large scale alga culture in the feed of fish larvae.

Growth and body nutrient deposition of two broiler commercial genetic lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação microbiológica e bromatológica da silagem ácida obtida de resíduos da indústria de filetagem de tilápia do Nilo (Oreochromis niloticus)

The experiment constituted in evaluating the acid silage prepared from Nile tilapia (Oreochromis niloticus) filletage industry residues. This silage was prepared in a filetage industry through the residues milling and 5% of ascetic acid addition and stock piling in a period up to until 201 days. Storaged silages in a period of 7, 12, 22, 27, 41, 48, 61, 75, 84, 91, 96, 110, 140, 151, 181, 187 and 201dias were evaluated. Bromatologics analyses of rude protein(PB), etereal extract (EE), humidity (UM), ashes (CZ) and microbiological analyses of Salmonella, total coliforms, faecals and Escherichia coli of the storaged silages in a period of 7, 91 and 201 days were realized. The pH was evaluated in all the storaged periods. Differences (P > 0.05) in the substance of PB, EE, UM and CZ were not observed. A linear increase in PH was observed, being stabilizing in plateau of 4.74. In relation to the microbiological analysis the presence of Salmonella, total coliforms, faecals and E. Coli were not found. Was concluded that the acid silage gotten from tilapia filetage residues produced with the use of 5% ascetic acid can be stored during 201 days without having Salmonella, total coliforms and faecals proliferation.

Características físico-qímicas da carne de caprinos submetidos a diferentes níveis de substituição do leite por soro de queijo durante o aleitamento

Fifty six crossbred kids Parda Alpina x Gurgueia were separeted into four groups of 14 (seven male and seven female) and submited to four treatments with different levels of milk goat substitution by cheese serum. The treatments were : T1=milk goat (testify); T2=15% serum at 23 days and 33% at 55 days; T3=15% serum starting from 16 days, 33% on 23 days and 51% on 72 days of age; and T4=33% on 16 days and 69% of liquid diet in the final fase. At 92 days of age, all animals were slaughtered for carcass evaluation. Pallete were separeted from 20 male animals (five by treatment) and the physical and chemical analysis of the meat were realized using these materials. The studied characteristics were: total weight (TW), meat weight (MW), bone weigth (BW) of the pallete, and percentage of umidity (U), ashes (A), protein (P), fat (F) and pH of the pallete meat. There was significant effect of the treatment over F. Means of PW, A and BW were, respectively 491, 342 and 149.8 g. The meal represented 69,6% of total pallete weight. Means of U, A, P and F were 73, 1.0, 19 and 1.95%, respectively. The pH was 6.7. Results allow to conclude that only the fat percentage of the meat was modified, due to the administration of serun milk on the liquid diet of the kids, during the milking fase.

Análise de Argamassas Com Substituição Parcial do Cimento Portland Por Cinza Residual de Lenha de Algaroba

With the increase in cement consumption, it has quickly become one of the inputs most consumed by mankind over the last century. This has caused an increase in CO2 emissions, as cement production releases large quantities of this gas into the atmosphere. Adding this fact to the growing consciousness of environmental preservation, it has led to a search for alternatives to cement to complement its derivatives, in the form of waste materials like the ashes. This research aimed to analyze the properties of mortars in fresh and hardened state with partial replacement of Portland cement by residual algaroba wood ash (CRLA) potteries produced by the state of Rio Grande do Norte. The CRLA was collected and sieved, where part of it was ground and characterized in comparison with that just sifted, being characterized according to its chemical composition, grain size, fineness, density, bulk density and index of pozzolanic activity. It was found that the wood ash does not act as pozzolan, and grinding it has not changed its characteristics compared to those just sifted, not justifying its use. Two traces were adopted for this research: 1:3 (cement: fine sand) and 1:2:8 (cement: hydrated lime: medium sand); both in volume, using as materials the CRLA just sifted, CP II F-32 Portland cement, CH-I hydrated lime, river sand and water from the local utility. For each trace were adopted six percentages of partial replacement of cement for wood ash: 0% (control) 5%, 7%, 10%, 12% and 15%. In the fresh state, the mortars were tested towards their consistency index and mass density. In the hardened state, they were tested towards their tensile strength in bending, compressive strength and tensile adhesion strength, and its mass density in the hardened state. The mortar was also analyzed by scanning electron microscopy and X-ray diffraction. Furthermore, it was classified according to NBR 13281 (2005). The results showed that up to a content of 5% substitution and for both traces, the residual algaroba wood ash can replace Portland cement without compromising the mortars microstructure and its fresh and hardened state

Rendimento de carcaça e composição química da carne da perdiz nativa (Rhynchotus rufescens)

A composição química da carne e o rendimento de carcaça de perdizes (Rhynchotus rufescens) adultas, com 12 meses, criadas em cativeiro com rações balanceadas, foram determinadas neste trabalho. Para rendimento de carcaça, após o abate e evisceração, foram feitos dois cortes: peito e coxa+sobrecoxa+dorso. Para análise química, foram retiradas três amostras de cada corte para determinação da composição centesimal da umidade, proteínas totais, lipídeos totais, cinzas e colesterol. Os valores observados mostraram um rendimento médio de carcaça de 74,4% com 36,6% de carne de peito. Os componentes químicos apresentaram para os cortes de coxa-sobrecoxa e peito, respectivamente, umidade 62,4 e 55,9%; proteínas 25,2 e 29,1%; lipídeos 1,6 e 5,6%; cinzas 1,4 e 1,2% e colesterol 234 e 70mg/100g. O excelente rendimento de carcaça, somado à composição química de sua carne, mostra o potencial desta espécie para a produção de carnes especiais.

Influência da interação fósforo disponível × fitase da dieta sobre o desempenho, os níveis plasmáticos de fósforo e os parâmetros ósseos de poedeiras comerciais

Dois experimentos foram realizados para avaliar a interação fósforo disponível (Pd) × fitase (UF) da dieta sobre o desempenho, os níveis plasmáticos de fósforo e os parâmetros ósseos de poedeiras. No experimento 1, utilizaram-se 240 aves com 40 semanas de idade distribuídas em esquema fatorial 5 × 2, composto de cinco níveis de fósforo disponível (0,094; 0,194; 0,294; 0,394 e 0,494%) e dois de fitase (0 e 300 unidades de fitase - UF). No experimento 2, utilizaram-se 288 aves com 44 semanas de idade, distribuídas também em esquema fatorial 3 × 4, composto de três níveis de fósforo disponível (0,094; 0,294 e 0,494%) e quatro de fitase (0; 300; 600 e 1.200 UF). No experimento 1, não houve interação fósforo disponível × fitase, mas o nível de fósforo disponível influenciou, de forma quadrática, a produção (PR) e a massa (MO) de ovos, os níveis plasmáticos de fósforo e a conversão por massa de ovos (CMO) e, de forma linear, o teor de cinzas na tíbia (CT) e a resistência óssea (RO). A adição de 300 UF elevou a disponibilidade do fósforo (de 4,034 para 4,784 mg/dL), o teor de CT (de 41,55 para 42,90%) e a resistência óssea (de 9,678 para 11,135 kgf/mm). No experimento 2, a produção aumentou de forma linear com os níveis de fósforo disponível da ração, que aumentaram linearmente com o aumento do nível de fitase. Os teores de cinzas na tíbia aumentaram até o nível de 567 UF. O aumento do fósforo disponível no nível de 600 UF melhorou de forma linear a massa de ovos, a conversão por massa de ovos e a conversão por dúzia de ovos. A suplementação da ração com menor teor de fósforo disponível (0,094%) com 300 a 1.200 UF melhorou a resistência óssea das aves. Poedeiras exigem em média 0,31 a 0,34% Pd. A adição de 300 UF ou o aumento do fósforo disponível em rações com 600 UF melhora a conversão por massa de ovos. A suplementação de rações deficientes em fósforo disponível com pelo menos 300 UF aumenta os níveis plasmáticos de fósforo, os teores de cinzas na tíbia e a resistência óssea de poedeiras comerciais.

Crescimento e deposição de nutrientes nos órgãos de frangos de corte de duas linhagens comerciais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crescimento e deposição de nutrientes nas penas, músculo, ossos e pele de frangos de corte de duas linhagens comerciais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características agronômicas e composição química de oito híbridos de sorgo [Sorghum bicolor (L.) Moench]

O experimento foi conduzido com o objetivo de avaliar as características agronômicas, composição química das frações e da planta inteira de oito híbridos de sorgo, semeados em março de 2000, no sentido de contribuir para os programas de seleção de germoplamas resistentes aos efeitos das estiagens prolongadas e, ao mesmo tempo, apropriados ao processo de ensilagem. Utilizou-se o delineamento em blocos ao acaso com oito tratamentos e três repetições, para avaliar os híbridos AG-2005, BR-700, MASSA-03, 498111, 65E3, 698005, 698007 e 699005. Não houve diferenças significativas entre produção de matéria seca (PMS) e proporção de folhas dos híbridos avaliados. A maior proporção de colmo (41,3%) foi observada no 498111 e a menor no MASSA-03 (28,9%). O híbrido 65E3 apresentou a maior proporção de panícula (43,2%) e o 498111 a menor (28,9%). Quanto à composição química da planta inteira, não foram observadas diferenças significativas entre os híbridos quanto aos teores de matéria seca, matéria mineral, hemicelulose, nitrogênio insolúvel em detergente neutro, nitrogênio insolúvel em detergente ácido e nutrientes digestíveis totais (NDT). Os teores de proteína bruta variaram de 6,5 a 8,8%, fibra em detergente neutro de 57,0 a 70,3%, fibra em detergente ácido de 29,8 a 36,2%, celulose de 25,3 a 31,2% e lignina de 3,6 a 5,5%, sendo estatisticamente diferentes entre os híbridos. O 699005 apresentou o maior teor de carboidratos solúveis (14,5%), diferindo estatisticamente apenas do híbrido 698007 (9,6%). Os híbridos também mostraram diferenças na composição química das frações folhas, colmo e panícula. de forma geral, todos os híbridos apresentaram teores de matéria seca e carboidratos solúveis adequados ao processo de ensilagem. As produções médias de matéria seca dos híbridos (6,2 t/ha), foram altas considerando-se a baixa precipitação ocorrida durante o período experimental. A análise de Cluster sugeriu o agrupamento dos híbridos de maior PMS e menores porcentagens de panícula e NDT e híbridos de menor PMS, porém com maiores porcentagens de panícula e NDT.